Simultaneous determination of metal ions. Catalytic oxidation of cobalt by metal ions when extracted with quinolin-8-ol

The catalytic effect of various ions on the aerial oxidation of Co(II) when extracted from weakly acidic solutions with quinolin-8-ol in chlorofom was studied. Oxidation is complete only in the presence of Fe(III) or V(V). Mixtures of Al(III), Cu(II), Fe(III) and Ni(II) with Co(II) at concentrations in the range 1–8 μg ml^?1 were analysed by using a multi-component analysis program involving first-order derivative spectra. Because of the metal ion interaction, a multivariate calibration process is required. The recovery factors achieved ranged from 93 to 111%.     

The chromatographic behavior of group (IIB) metal ions on polyurethane foam functionalized with 8-hydroxyquinoline

Polyurethane foam functionalized with 8-hydroxyquinoline has been prepared by coupling the foam matrix with 8-hydroxyquinoline (oxine) through an azo spacer. The oxine-bonded foam (Ox PUF) was characterized by use of different tools (UV–Vis spectra, IR spectra, density, and stability). Ox PUF was found to be very suitable for separation and preconcentration of trace metals, e.g. Zn(II), Cd(II), and Hg(II) ions, from wastewater in the pH ranges 2–12, 9–12, and 3–6, respectively. Various conditions influencing the sorption of these metal ions on to Ox PUF were optimized. Extraction of the metal ions was accomplished in 15 to 20 min. Study of the variation of the sorption of the tested metal ions with temperature yielded average values for H, S, and G of 41.99, 158.23, and –5.1 kJ mol^–1, respectively. The capacities of the foam material were 0.27, 0.16, and 0.09 mmol g^–1 for Zn(II), Cd(II), and Hg(II), respectively. Preconcentration factors >50 were achieved (RSD6.18). The quantitative results were obtained from experiments performed using certified reference materials.     

On-line preconcentration of trace copper for flame atomic absorption spectrometry using a spherical cellulose sorbent with chemically bound quinolin-8-ol

Preconcentration was effected using a 50 mm × 2 mm i.d. minicolumn packed with a spherical cellulose sorbent with chemically bound quinolin-8-ol function groups (Ostorb Oxin). The column was connected to the nebulizer of the atomic absorption spectrometer and the sample solution and eluent (2 M hydrochloric acid) were sucked through it at a flow-rate of 2–3 ml min^?1 by utilizing the negative pressure of the nebulizer. The experimental design was tested with the determination of traces of copper. Peak-area and peak-height measurements were compared. Owing to the simple calibration, the former method was used for quantification. The dynamic range was from 0.3 ng ml^?1 (detection limit) to 5 μg ml^?1 (breakthrough). The reproducibility in the concentration range 25 ng ml^?1-5 μg ml^?1 was better than 5%. Water-soluble inorganic salts, ammonia and sodium hydroxide were analysed. The accuracy of the results was checked by anodic-stripping voltammetry and by electrothermal AAS.     

Study of the complexation chemistry and speciation of thallium for on-line preconcentration with immobilised quinolin-8-ol

The effects of various buffering reagents and pH conditions were investigated by flame atomic absorption spectrometry to optimise complexation of T1³⁺ with quinolin-8-ol (8-Q), immobilised on controlled-pore glass beads in a 5-cm column. As Tl³⁺ is a softer acid than the other trivalent cations of the Group III elements, the effects of the buffers are different from those observed previously for Al³⁺, Ga³⁺ and In³⁺. A mixed buffer of 0.1 mol l^–1 acetate and 0.1 mol l^–1 ammonium chloride at pH 10 proved most successful, although 0.1 mol l^–1 maleate was also satisfactory over a pH range of 4–10. As thallium normally exists as Tl⁺ in solution, an oxidation method was developed to convert the ions to Tl³⁺, which is more efficiently complexed by 8-Q. Addition of 1–10 l of bromine per 100 ml of sample was sufficient to oxidise Tl⁺ without heating. Excess bromine was removed by addition of phenol. With a flow-rate of 6 ml min^–1, the detection limit of Tl³⁺ is 3 ng ml^–1, for a 3-miri preconcentration time. The enrichment factor under these conditions is 55 and the characteristic concentration is 2 ng ml^–1. The major ions in sea water did not interfere with Tl³⁺ preconcentration and the tolerable limits of Fe³⁺, Cu²⁺ and Al³⁺ are high enough to permit analysis of river and sea waters. The method was applied successfully to the determination of thallium in potassium-enriched table salt. It was also shown that the concentrations of Tl⁺ and Tl³⁺ in a solution can be derived using the described procedure, allowing speciation of inorganic thallium.     

On-line preconcentration and ICP determination for trace metal analysis

The use of a closed-loop on-line enrichment procedure in combination with an ICP plasma emission spectrometer has been developed for the analysis of trace metal ions, such as Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn. The procedure utilizes a preconcentration column filled with an anion exchange resin and 8-hydroxy-7-iodoquinoline-5-sulphonic acid is added to the sample prior to preconcentration. Details on the optimization of pretreatment and instrumental conditions are described. Results obtained for the analysis of river water and antarctic seawater are reported.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Separation and determination of some trivalent metal ions using rhodamine B grafted polyurethane foam

The incorporation of rhodamine B into polyurethane foam matrix was prepared by mixing the rhodamine B with polyol (polyether) prior to the addition of diisocyanate reagent to form the polyurethane foam material. Rhodamine B grafted polyurethane foam (Rod.B-PUF) was found to be very suitable for the separation and preconcentration of trivalent metal ions e.g. bismuth (III), antimony (III) and iron (III) from thiocyanate solutions. Bismuth and antimony were separated from concentrated acid medium (1–6 M H₂SO₄). Iron (III) was separated from pH 1 to 3. The kinetics of sorption of the Bi (III), Sb (III) and Fe (III) onto the Rod.B-PUF was found to be fast, the extraction is accomplished from 5 to 10 min with average values of half-life of sorption (t_1/2) of 2.9 min. The average values of the Gibbs free energy (ΔG) for the sorption of metal ions onto Rod.B-PUF are ?6.6 kJ mol^?1, which reflect the spontaneous nature of sorption process. The sorption mechanism of the metal ion onto Rod.B-PUF was also discussed.     

On-site preconcentration and trace metal ions determination in the Okavango Delta water system, Botswana

Microcolumns containing 8-hydroxyquinoline azo-immobilized on controlled pore glass were incorporated in a field sampler for on-site collection, isolation and preconcentration of trace metal ions in waters of the Okavango Delta, Botswana. Sequestered trace metal ions were recovered by elution with 0.5 ml of 1.5 M nitric acid, and determined by graphite furnace atomic absorption spectrometry (GFAAS). This sampling and enrichment method minimizes sample contamination, and collection of large volumes of water samples for transporting, over long distances, to analytical laboratories is avoided.Data reported comprise one of the initial surveys on trace metal ion concentrations in waters of the Okavango Delta, Botswana. In waters with more efficient mixing, dissolved metal ion concentrations found were generally low with slightly elevated levels of manganese (7-19 μg l⁻¹), zinc (2.7-4.8 μg l⁻¹), nickel (0.2-2.5 μg l⁻¹) and copper (0.3-2.1 μg l⁻¹). For each trace metal ion, concentration levels seem to reflect zones of varying water conveyance, and show no obvious temporal and spatial variations apart from a slight increment from the inlet in the upper Delta to the outlets in the lower Delta.     

Luminescence determination of europium microquantities after its preconcentration on polyurethane foam

Sorption of the mixed-ligand complexes of europium(III) with thenoyltrifluoroacetone (TTA) and 1,10-phenanthroline (Phen) on polyurethane foam (PUF) has been studied by a luminescence method. The optimum conditions of sorption have been found. The sorbate composition on PUF has been determined (the Eu:TTA:Phen ratio was 1:3:1). Luminescence spectra of the europium complexes in solution and on PUF at 77 K have been investigated. It was concluded that the character of the Eu³⁺ coordination both in solution and on the sorbent is the same. Stability constants for the complexes in solution (lg K = 8.4) and on the sorbent (lg K = 5.5) have been calculated. The decrease of the stability of the complex on PUF is explained by the deformation of the complex molecule in the sorbent phase. Sorption coefficients for europium (245) and scandium (2.35) and the coefficient of selectivity for europium in Sc₂O₃ (102.3) have been determined. A method for the sorption-luminescence determination of europium in Sc₂O₃ with a lower limit of contents determined of 1 × 10⁻⁶⁰% has been developed.     

Determination of heavy metal ions in environmental samples employing preconcentration on novel resins of polyurethane foam linked with o-Aminophenol or o-Hydroxyphenylazonaphthol

o-Aminophenol (AP) and its azo derivative with ß-Naphthol(Naph) is bonded to polyurethane foam (BPUF) and used as solid phase extractor of nickel, cadmium and zinc ions in aqueous solutions prior to their atomic absorption spectrometric determinations. The novel resins of polyurethane foam were characterised by density, elemental analysis, IR spectra and chemical stability. The parameters including pH, sample volume, matrix effects were investigated. The relative standard deviation (RSD) of the combined method of sample treatment, preconcentration and determination with atomic absorption spectrometry is generally lower than 10%. The limit of detection was found between 0.06 and 0.22?µg?L^?1. The procedure was used for determination of analyte ions in natural water samples, apple leaves and fish liver.     

Molybdenum determination in iron matrices by ICP-AES after separation and preconcentration using polyurethane foam

A procedure is proposed for the separation and determination of molybdenum in iron matrices by a batch process. It is based on the solid-phase extraction of the molybdenum(V) ion as thiocyanate complex on polyurethane (PU) foam. The extraction parameters were optimized. Using 0.20 mol L-1 hydrochloric acid, a thiocyanate concentration of 0.10 mol L-1, 100 mg of polyurethane foam and shaking time of 10 min, molybdenum (5-400 micrograms) can be separated and preconcentrated from large amounts of iron (10 mg). Desorption was carried out instantaneously by conc. nitric acid or acetone. Distribution coefficients, sorption capacity of the PU foam and coefficients of variation were also evaluated. The effect of some ions on the separation procedure was assessed. Iron(III) should be reduced to iron(II). The proposed procedure was used to determine molybdenum in standard iron matrices such as steel and pure iron. The achieved results did not show significant differences with certified values.     

Molybdenum determination in iron matrices by ICP-AES after separation and preconcentration using polyurethane foam

A procedure is proposed for the separation and determination of molybdenum in iron matrices by a batch process. It is based on the solid-phase extraction of the molybdenum(V) ion as thiocyanate complex on polyurethane (PU) foam. The extraction parameters were optimized. Using 0.20 mol L^–1 hydrochloric acid, a thiocyanate concentration of 0.10 mol L^–1, 100 mg of polyurethane foam and shaking time of 10 min, molybdenum (5–400 μg) can be separated and preconcentrated from large amounts of iron (10 mg). Desorption was carried out instantaneously by conc. nitric acid or acetone. Distribution coefficients, sorption capacity of the PU foam and coefficients of variation were also evaluated. The effect of some ions on the separation procedure was assessed. Iron(III) should be reduced to iron(II). The proposed procedure was used to determine molybdenum in standard iron matrices such as steel and pure iron. The achieved results did not show significant differences with certified values.     

Water-soluble quinolin-8-ol polymer for liquid-phase separation of elements

The separation of various elements by a water-soluble quinolin-8-ol polymer in conjunction with membrane filtration is demonstrated. The method is based on the retention of inorganic ions by a quinolin-8-ol derivative of poly(ethyleneimine) in a membrane filtration cell and subsequent separation of low-molecular-weight species from the polymer complex formed. It is shown that poly(ethyleneimine) and the polymeric quinolin-8-ol derivative can retain metal ions in aqueous solution. The polymer, however, exhibits a much higher retention capability in acidic solution with respect to more highly charged metal ions, such as Zr, Nb, W, Bi, and can therefore be used for separating them from ions that do not form stable quinolinolates. At higher pH, the water-soluble quinolin-8-ol polymer can be applied to the separation and preconcentration of many metal ions. Owing to the hydrophilic nature of the polymer complex in solution, the preseparated elements remain in the aqueous phase, which is convenient for their subsequent determination by AAS, ICP-AES, etc.     

Schiff base-functionalised styrofoam resin for preconcentration of metal ions in wastewater and wastewater-irrigated vegetables samples

Polystyrene (PS) was extracted from styrofoam waste and functionalised with schiff base, N,N-bis(salicylidene)cyclohexanediamine (SCHD) through an azo spacer. The resin was characterised and used for preconcentration of Pb(II), Ni(II) and Cd(II) ions prior to their trace determinations by microsample injection system–coupled flame atomic absorption spectrometry (MIS-FAAS). The recoveries of studied metal ions were achieved ≥96.0% with relative standard deviation (RSD) ≤4.5 at optimum parameters: pH 8; resin amount 300 mg; flow rates 3.0 mL min^?1 of sample solution; and 2.0 mL min^?1 of eluent (2.0 mol L^?1 HNO₃). The limits of detection (LODs) and limits of quantification (LOQs) were found to be 0.32, 0.23 and 0.21 and 1.10, 0.78 and 0.69 μg L^?1, respectively, with preconcentration factors (PFs) of 500, 800 and 1000, respectively. The linear ranges of the method were 1–40, 1–25 and 1–20 μg L^?1 for Pb(II), Ni(II) and Cd(II) ions, respectively. The accuracy and validation of the method were evaluated by analysis of certified reference materials (CRMs). The method was successfully applied for preconcentration of studied metal ions in wastewater and wastewater-irrigated vegetable samples.     

Ion-pair liquid-solid extraction for the preconcentration of trace metal ions Optimization of experimental conditions

Cu(II) has been recovered from dilute solutions (0.1 mug/ml) by adsorbing the ion-pairs formed between different quaternary ammonium salts and the Cu-8-hydroxyquinoline-5-sulphonic acid complex on adsorbent resins, namely XAD 8 and S 862. Both batch and column techniques have been used, the first of which gave superior recovery and precision. It has also been shown that XAD 8 resin can be transformed into an ion-exchanger suitable for preconcentration of Cu(II). The results obtained have been compared with those of reversed-phase ion-pair chromatography and a model is proposed.     

Chelating resin from functionalization of chitosan with complexing agent 8-hydroxyquinoline: application for metal ions on line preconcentration system

This study describes the functionalization of biopolymer chitosan, using the complexing agent 8-hydroxyquinoline (oxine) by reaction of diazotization. The chelating resin was characterized by degree of deacetylation, infrared, Raman spectroscopy. The efficiency of the chelating resin and accuracy of the proposed method was evaluated by the metal ion recovery technique in the analysis of potable water, lake water, seawater and a certified sample of oyster tissue. The metal ions Cd(II) and Cu(II) in the samples were previously enriched in a minicolumn and flow injection flame atomic absorption spectrometry (FI-FAAS) determined the concentrations of the analytes. The chelating resin exhibited high selectivity for Cd(II) at pH 7 and for Cu(II) at pH 10. The eluent concentration was tested by the use of HNO₃ in concentrations of 0.1-3 mol l⁻¹ maximum response was obtained at 0.5 mol l⁻¹ for Cd(II) and Cu(II), with R.S.D. values of 0.4%. The analytes gave relative standard deviations (R.S.D.) of 1.5 and 0.7% for solutions of Cd(II) and Cu(II), respectively (n = 7) containing 20 μg l⁻¹ of the metal ions, defining a high reproducibility. The limits of detection (LOD) were 0.1 μg l⁻¹ for Cd(II) and 0.4 μg l⁻¹ for Cu(II). The analytical properties of merit were obtained using the parameters previously optimized with preconcentration time of 90 s. The chelating resin showed chemical stability within a wide range of pH and the efficiency was not altered for the preconcentration of the metal ions during all the experiments.     

Application of polyurethane foam as a sorbent for trace metal pre-concentration — A review

The first publication on the use of polyurethane foam (PUF) for sorption processes dates back to 1970, and soon after the material was applied for separation processes. The application of PUF as a sorbent for solid phase extraction of inorganic analytes for separation and pre-concentration purposes is reviewed. The physical and chemical characteristics of PUF (polyether and polyester type) are discussed and an introduction to the characterization of these sorption processes using different types of isotherms is given. Separation and pre-concentration methods using unloaded and loaded PUF in batch and on-line procedures with continuous flow and flow injection systems are presented. Methods for the direct solid sampling analysis of the PUF after pre-concentration are discussed as well as approaches for speciation analysis. Thermodynamic proprieties of some extraction processes are evaluated and the interpretation of determined parameters, such as enthalpy, entropy and Gibbs free energy in light of the physico-chemical processes is explained.     

Advances in methods of on-line preconcentration in the capillary-electrophoretic determination of metal ions

The possibility of pH-stacking is proved for the on-line preconcentration of metal ions by the example of the capillary-electrophoretic determination of zinc(II) and cadmium(II) ions with photometric detection in the visible spectral region in the form of their complexes with Methylthymol Blue (MTB). It was shown that pH-stacking enabled the attaining of preconcentration coefficients of more than 10² with an efficiency 10⁶ of theoretical plates in the hydrodynamic injection of a sample at 30 mbar for 120 s.     

Total-reflection X-ray fluorescence determination of cobalt and mercury in water using preconcentration on a polyurethane foam sorbent

A technique for X-ray fluorescence determination of cobalt and mercury in water using static and dynamic concentration in the form of thiocyanate and iodate complexes on polyurethane foam sorbents based on ethers is suggested. The possibility of the measurement of the X-ray fluorescence signal of analytes in the total external reflection mode, both in eluates and directly in the sorbent phase, is considered. The suggested approach allows one to improve the sensitivity of cobalt and mercury determination in water by 2–4 orders of magnitude in comparison with the classical sorption X-ray fluorescence techniques.