Electrodeposition and stripping voltammetry of arsenic(III) and arsenic(V) on a carbon black–polyethylene composite electrode in the presence of iron ions

In this work, a new sensor is proposed for the stripping voltammetric determination (anodic stripping voltammetry—ASV) of total arsenic(V) or arsenic(III). The sensor is based on an Fe-modified carbon composite electrode containing 30 % carbon black–high-pressure polyethylene (CB/PE). The modification with iron is achieved by the addition of Fe(III) or Fe(II) ions to the sample solution and co-electrodeposition of iron and arsenic on the CB/PE electrode. In anodic stripping voltammetry, two peaks are observed: an Fe peak at ?0.45 or ?0.29 V and a peak at 0.12?±?0.07 V which depends on the arsenic concentration and corresponds to the As(0) → As(III) oxidation, as is the case with other solid electrodes. The optimum conditions proposed for ASV determination of As(V) and As(III) in solutions in the presence of dissolved oxygen are the following: the background electrolyte is 0.005 M HCl containing 0.5–1 mg/?L Fe(III) for As(V) and containing 1.0–1.5 mg/?L Fe(III) for As(III), respectively; E _dep?=??2.3 V; rest period at ?0.10 V for 3–5 s before the potential sweep from ?0.2 to +0.4 V; scan rate is 120 mV/?s. The detection limit (LOD, t?=?120 s) for As(III) and As(V) is 0.16 and 0.8 μg/?L, respectively. Various hypotheses on the effect of Fe ions and atoms on the electrodeposition and dissolution of arsenic are considered. The new method of determination of As(III) and As(V) differs from known analogues by its simplicity, low cost, and easy accessibility of the electrode material. It allows the voltammetric determination of total arsenic after chemical reduction of all its forms to As(III) or after their oxidation to As(V).     

A comparison of different types of gold–carbon composite electrode for detection of arsenic(III)

A study has been conducted using abrasively modified basal and edge-plane graphite, carbon-paste, and carbon–epoxy electrodes to create gold–carbon composite electrodes. Using either nano or micro-sized gold particles their suitability for use in detecting arsenic(III) is assessed. It was found that gold arrays prepared from micron-sized particles gave the best performance for arsenic detection. In particular micron arrays produced in carbon-paste electrodes with an easily renewable surface work well for detection of arsenic, producing a detection limit of 5(±2)×10^–9 mol L^–1, with a high sensitivity of 10(±0.1) A mol^–1 L.     

Enantiospecific Synthesis of (–)-Cuspareine and (–)-Galipinine

An enantiospecific route to the synthesis of tetrahydroquinoline alkaloids (–)-cuspareine and (–)-galipinine is reported. Coupling of an iodide derivative of D-serine with aromatic dithianes and Pd-catalyzed intramolecular C–N coupling are the key steps in the synthesis.     

Determination of the stability constants of Pb–(DIPSO)x–(OH)y and Pb–(AMPSO)x–(OH)y systems

In this work, complexation between lead ion and the ligands 3-[N,N-bis(2-hydroxyethyl)amino]-2-hydroxypropanesulfonic acid (DIPSO) and N-(1,1-dimethyl-2-hydroxyethyl)-3-amino-2-hydroxypropanesulfonic acid (AMPSO), which are commercial pH buffers, is presented. Both ligands form complexes with lead in their pH buffer range (between pH 6.5 and 8.5 for DIPSO and between pH 8.0 and 9.0 for AMPSO). The final models and the overall stability constants, which are reported here, were determined by direct current polarography and glass electrode potentiometry [only for the Pb–(DIPSO)_x–(OH)_y system] at 25.0 °C and 0.1 M KNO₃ ionic strength. For the Pb–(DIPSO)_x–(OH)_y system, the proposed final model contains PbL, PbL₂, PbL₂(OH), and PbL₂(OH)₂ with stability constants, as log β, of 3.4 ± 0.1, 6.35 ± 0.15, 12.8 ± 0.2, and 18.0 ± 0.3, respectively. For the Pb–(AMPSO)_x–(OH)_y system, the species observed are PbL, PbL(OH), and PbL(OH)₂ with stability constants, as log β, of 2.9 ± 0.5, 9.4 ± 0.1, and 14.5 ± 0.2, respectively. For AMPSO, the possible adsorption of the ligand at the mercury electrode surface was evaluated by alternating current polarography through calculation of the capacitance of the double layer.     

Asymmetric synthesis of (–)-leiocarpin A via (–)-(S)-goniothalamin employing Julia–Kocienski olefination

A concise and enantioselective syntheses of antileukemic natural products such as (–)-(S)-goniothalamin and (–)-leiocarpin A has been accomplished in excellent yields. By employing reported conditions on suitable substrates via Julia–Kocienski olefination, intramolecular lactonization, and subsequently dehydroxylative olefination, (–)-(S)-goniothalamin was synthesized. Then Sharpless asymmetric dihydroxylation–intramolecular Michael addition on (–)-(S)-goniothalamin provided (–)-leiocarpin A.     

Determination of arsenic species and arsenosugars in marine samples by HPLC–ICP–MS

Arsenic-speciation analysis in marine samples was performed by high-pressure liquid chromatography (HPLC) with ICP–MS detection. Separation of eight arsenic species—As^III, MMA, DMA, As^V, AB, TMAO, AC and TeMAs⁺—was achieved on a C₁₈ column with isocratic elution (pH 3.0), under which conditions As^III and MMA co-eluted. The entire separation was accomplished in 15 min. The HPLC–ICP–MS detection limits for the eight arsenic species were in the range 0.03–0.23 μg L⁻¹ based on 3σ for the blank response (n=5). The precision was calculated to be 2.4–8.0% (RSD) for the eight species. The method was successfully applied to several marine samples, e.g. oysters, fish, shrimps, and marine algae. Low-power microwave digestion was employed for extraction of arsenic from seafood products; ultrasonic extraction was employed for the extraction of arsenic from seaweeds. Separation of arsenosugars was achieved on an anion-exchange column. Concentrations of arsenosugars 2, 3, and 4 in marine algae were in the range 0.18–9.59 μg g⁻¹. This paper was presented at the European Winter Conference 2005     

Soft template synthesis in copper(II)–dithiooxamide–methanal,copper(II)–dithiooxamide–ethanal and copper(II)–dithiooxamide–propanone triple systems in a copper(II)hexacyanoferrate(II) gelatin-immobilized matrix

Novel complexing processes in the Cu^II–dithiooxamide–methanal, Cu^II–dithiooxamide–ethanal and Cu^II–dithiooxamide–propanone triple systems proceeding under specific conditions, to copper(II)hexacyanoferrate(II) gelatin-immobilized matrix systems in contact with aqueous-alkaline (pH 12) solutions containing dithiooxamide and methanal, ethanal or propanone, have been studied. It has been shown that template synthesis leading to the formation of macrocyclic coordination compounds (2,8-dithio-3,7-diaza-5-oxanonandithioamide-1,9)copper(II), (2,8-dithio-3,7-diaza-4,6-dimethyl-5-oxanonandithio-amide-1,9)copper(II) and (4,4,6-trimethyl-2,8-dithio-3,7-diazanonen-6-dithioamide-1,9)copper(II), respectively, takes place under such conditions. Dithiooxamide, methanal, ethanal and propanone act as ligand synthons in these processes.     

Pyrolysis kinetics of ethylene–propylene (EPM) and ethylene–propylene–diene (EPDM)

The thermal degradation kinetics of several ethylene–propylene copolymers (EPM) and ethylene–propylene–diene terpolymers (EPDM), with different chemical compositions, have been studied by means of the combined kinetic analysis. Until now, attempts to establish the kinetic model for the process have been unsuccessful and previous reports suggest that a model other than a conventional nth order might be responsible. Here, a random scission kinetic model, based on the breakage and evaporation of cleavaged fragments, is found to describe the degradation of all compositions studied. The suitability of the kinetic parameters resulting from the analysis has been asserted by successfully reconstructing the experimental curves. Additionally, it has been shown that the activation energy for the pyrolysis of the EPM copolymers decreases by increasing the propylene content. An explanation for this behavior is given. A low dependence of the EPDM chemical composition on the activation energy for the pyrolysis has been reported, although the thermal stability is influenced by the composition of the diene used.     

Vaporization thermodynamics of PdAsx (liquid), Pd0.75(As1 − xBx)0.25 (liquid) and elemental arsenic

Liquid PdAs_x, and Pd_0.75(As_{1 − x}B_x)_0.25 were studied by mass spectrometry combined with Knudsen effusion to determine the variation of arsenic and palladium activity with composition and temperature. Equations are given which describe the thermodynamic properties. At 1200 K, Pd_0.75As_0.25 is the congruently vaporizing composition and the high palladium phase limit is Pd_0.79As_0.21.The thermodynamic properties of the binary liquid are essentially unchanged by carbon or tungsten saturation. However, the activity of palladium in Pd(s) is lowered causing the liquid phase boundary to move to a higher arsenic composition.The Pd_0.75(As_{1 − x}B_x)_0.25 liquid has a positive deviation from ideality which indicates a repulsive energy between arsenic and boron in solution.The arsenic monomer pressure over elemental As(1) can be represented by log₁₀P(atm) = −14846/T + 7.116 between 1400 K and 1700 K.     

Determination of trace arsenic(V) by catalytic solid substrate-room temperature phosphorescence quenching method

In the H2SO4 medium and in the presence of dodecylbenzene sulfonic acid sodiumsalt (DBS), dimethyl yellow (R) could emit strong and stable solid substrate room temperature phosphorescence (RTP) on filter paper. And NaIO4 could oxidize R to cause the RTP quenching. Arsenic(V) could catalyze the reaction of NaIO4 oxidizing R, which caused the RTP sharply quenching. The reducing value of phosphorescence intensity (△Ip) for the system with DBS is 3.3 times higher than that without DBS. Moreover, the△Ip is proportional to the concentration of As(V). Based on the facts above, a new RTP quenching method for the determination of trace As(V) has been established.     

Bis(2,4–pentanedionato)vanadium(IV) aryloxides

Complexes of composition [VCl(acac)2(OAr1–4)] and [V(acac)2(OAr1–4)2] (HOAr1=HOC6H4NO2–4, HOAr2= HOC6H4OMe-4, HOAr3=HOC6H4But-4 and HOAr4= HOC6H2But-2,6–Me-4; acac=2,4–pentanedionato ion) have been synthesized by the reaction of [VCl2(acac)2] with the respective phenols or their trimethylsilyl derivatives. The complexes have been characterized by physicochemical and spectroscopic techniques. They are non-electrolytes in nitrobenzene. Room temperature magnetic moments in the 1.71–1.82B range are consistent with the VIV system. The reactions of [VCl(acac)2(OAr2)] and [VCl(acac)2(OAr3)] with chloride acceptors have been studied by conductance techniques and the formation of ionic complexes of the types [V(acac)2(OAr2,3)][MCl4] (M=Fe, Al or Sb) and [V(acac)2(OAr2,3)][MCl6] (M=P or Sb) is indicated by the conductance composition curves. Several of these complexes have been isolated and characterized.     

Synthesis and Reactivity of Hydroxypoly(ethylene oxide) propyl–b–polydimethylsiloxane–b–propyl hydroxypoly(ethylene oxide)

A series of α, ω–bishydroxyl terminated PDMS, hydroxypoly(ethylene oxide) propyl–b–polydimethylsiloxane–b–propyl hydroxypoly(ethylene oxide) (HPEO–PDMS–HPEO) was prepared by a hydrosilation reaction of monoallyloxy substituted poly(ethylene oxide) with α,ω–bishydrogen terminated PDMS (HPDMS) that obtained via acid–catalyzed ring–opening polymerization of octamethylcyclotetrasiloxane with 1,1,3,3–tetramethyldisiloxane. Chloroplatinic acid was employed as the catalyst of hydrosilation. The molecular weight of HPEO–PDMS–HPEO could be controlled easily by varying the chain length of HPDMS. FTIR and ¹H–NMR spectroscopy were used to identify the structure of HPEO–PDMS–HPEO and HPDMS. The conversion of Si–H bond to Si–C bond was affected by the catalyst amount, reaction time and temperature. It was found that the optimum condition of hydrosilation reaction was the catalyst amount of 22 μg/g and 5 h time at 100°C. Synthesized HPEO–PDMS–HPEO showed good storage stability at ambient temperature. Urethane reaction of OH and NCO group revealed that HPEO–PDMS–HPEO was more reactive toward to diisocyanate than α, ω –bishydroxylbutyl terminated PDMS.     

Structures and luminescent properties of two heterotrimetallic Ln(III)–Sr(II)–K(I) complexes

Eu(III)–Sr(II)–K(I) and Tb(III)–Sr(II)–K(I) heterotrimetallic metal-organic frameworks with 2,4,6-pyridinetricarboxylic acid have been synthesized under hydrothermal conditions. The complexes are isomorphic and both in triclinic space group P-1. The ligands bond with three metal ions with two coordination modes. One connects seven metal ions and the other connects eight metal ions. IR spectra, thermal analysis, and photoluminescent properties have been studied. The results display strong characteristic emissions of Eu(III) or Tb(III) ions with excitation of ultraviolet radiation.     

Anodic stripping voltammetric analysis of trace arsenic(III) enhanced by mild hydrogen-evolution at a bimetallic Au–Pt nanoparticle modified glassy carbon electrode

A glassy carbon electrode (GCE) modified with electrodeposited bimetallic Au–Pt nanoparticles (Au–PtNPs) was applied to sensitively detect As(III) by linear sweep anodic stripping voltammetry (LSASV). In 0.5 M aqueous H₂SO₄, atomic hydrogen and molecular hydrogen were easily electrogenerated at the Pt sites on Au–PtNPs/GCE, which can chemically reduce As(III) to As(0) and enhance the cathodic preconcentration of As(0) at both the Pt sites and the neighboring Au sites. Since the As(0)–Au affinity is weaker than the As(0)–Pt affinity, the preconcentrated As(0) can be rapidly oxidized on/near the surface Au sites of Au–PtNPs/GCE, yielding sharper and higher LSASV current peaks. Under optimum conditions (700 s preconcentration at − 0.1 V, 5 V s^− 1), the LSASV peak current for the As(0)–As(III) oxidation responded linearly to As(III) concentration from 0.005 to 3.0 μM with a limit of detection (LOD) of 3.7 nM (0.28 ppb) (S/N = 3), while that for the As(III)–As(V) oxidation was linear with As(III) concentration from 0.01 to 3.0 μM with a LOD of 6.0 nM (0.45 ppb) (S/N = 3). This method was applied for analysis of As(III) in real water samples.     

Titanium(IV)–EDTA complex

This work aims the evaluation of the kinetic triplets corresponding to the two successive steps of thermal decomposition of Ti(IV)–ethylenediaminetetraacetate complex. Applying the isoconversional Wall–Flynn–Ozawa method on the DSC curves, average activation energy: E=172.4±9.7 and 205.3±12.8 kJ mol^–1, and pre-exponential factor: logA=16.38±0.84 and 18.96±1.21 min^–1 at 95% confidence interval could be obtained, regarding the partial formation of anhydride and subsequent thermal decomposition of uncoordinated carboxylate groups, respectively. From E and logA values, Dollimore and Málek methods could be applied suggesting PT (Prout–Tompkins) and R3 (contracting volume) as the kinetic model to the partial formation of anhydride and thermal decomposition of the carboxylate groups, respectively.     

A Silver(I)–Gold(II) Hexanuclear Guanidinate–Benzoate Cluster with Short Au–Au Bonds

Abstract  Attempts to remove the halide atoms from [Au₂(hpp)₂Cl₂], 1, Hhpp = 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine, with Ag(I) benzoate lead to the formation of the Au(I)–Ag(I) product, [(PhCOO)₂Au₄(hpp)₄Ag₂(PhCOO)₄], 2. This material is stable to air and light at room temperature and shows a UV–vis spectrum in THF with absorbances at 575, 440, 345, and 273 nm. The mixed metal product crystallizes as green crystals in the monoclinic space group P2₁/n. The Au–Au distances of 2.4473(19) ? are the shortest gold–gold distances reported to date. The gold···silver distance is 3.344(3) ? and the silver···silver distance is 2.771(6) ?. This latter distance is short compared with the Ag···Ag distance of 2.902(3) ? in the eight-membered silver benzoate dimer starting material. The Au(II) hpp and Ag(I) benzoate components are linked by carboxylate groups and two gold-silver interactions. This result stands in structural contrast to terminal carboxylate products observed with Au(II) ylides and amidinates wherein the carboxylate is not bridging to another metal atom. Index Abstract  Three equivalents of silver benzoate react with [Au₂(hpp)₂Cl₂], 1, Hhpp = 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine, to form the gold(II)-silver(I) product, 2, [(PhCOO)₂Au₄(hpp)₄Ag₂(PhCOO)₄]. The gold–gold distance of 2.4473(19) ? is the shortest gold–gold distance reported to date. The gold–silver distance is 3.344(3) ? and the silver–silver distance is 2.771(6) ?. Dedicated to the memory of F. Albert Cotton (1930–2007).     

Copper(II)–8-mercaptoquinoline,copper(II)–5,8-dimercaptoquinoline and copper(II)–5-thiomethyl-8-mercaptoquinoline complexing in a copper(II)hexacyanoferrate(II) gelatin-immobilized matrix

Novel complexing processes in the Cu^II–8-mercaptoquinoline, Cu^II–5,8-dimercaptoquinoline and Cu^II–5-thiomethyl-8-mercaptoquinoline systems proceeding in the copper(II)hexacyanoferrate(II) gelatin-immobilized matrix in contact with aqueous solutions of the ligands indicated, have been studied. Under the conditions specified for complexing in the Cu^II–8-mercaptoquinoline system, only a monomeric water-insoluble coordination compound was formed. In the Cu^II–5,8-dimercaptoquinoline system, three coordination compounds were formed and, in the Cu^II–5-thiomethyl-8-mercaptoquinoline system, two such compounds were formed. Conversely, complexing in solution or solid phase results in the formation only coordination compounds in each of the system studied.     

Adsorption of arsenic (V) from a water solution onto a surfactant-modified zeolite

In this study a surfactant-modified zeolite (SMZ) was prepared by adsorbing the cationic surfactant hexadecyltrimethylammonium (HDTMA) bromide on a clinoptilolite. The adsorption of the surfactant modified the surface properties of the clinoptilolite and enhanced the anionic capacity of the SMZ. The adsorption equilibrium data of As(V) from the water solution on the SMZ were obtained in a batch adsorber, and the Langmuir isotherm matched the data reasonably well. The As(V) adsorption capacity of the SMZ was 12.5 times greater than that of the clinoptilolite. The adsorption of As(V) on SMZ was mainly due to the interactions between the anionic sites of the SMZ and the As(V) anions in water solution. The adsorption capacity of the SMZ was dependent on the solution pH. The adsorption capacity was increased and decreased by augmenting the pH from 5 to 7 and from 7 to 12, respectively. This unusual behavior was due to the fact that the affinity of the As(V) for the SMZ was dependent on the As(V) species that were present in solution. The adsorption capacity of the SMZ was slightly favored by decreasing the temperature from 25 to 15 °C. The heat of adsorption was estimated to be ΔH _ads=−46.82 KJ/mol, indicating that the adsorption was exothermic and the As(V) was chemisorbed on the SMZ.     

Thermal analysis of W-free Co–(Ni)–Al–Mo–Nb superalloys

CuAl layered double hydroxide (CuAl-LDH) was synthesized by co-precipitation. Sodium phenyl phosphate (SPP) and sodium dodecyl sulfate (SDS) are used to modify CuAl-LDH for preparing CuAl-(SPP)LDH and CuAl-(SDS)LDH, which were incorporated into epoxy resin (EP) to obtain EP/CuAl-(SPP)LDH and EP/CuAl-(SPP)LDH nanocomposites. The results indicate that SPP and SDS are intercalated into the interlayers of CuAl-LDH, and CuAl-(SPP)LDH has larger layer spacing than CuAl-(SDS)LDH. The thermal stability and flame-retardant performances of EP/CuAl-(SPP)LDH nanocomposites were better than those of EP/CuAl-(SDS)LDH composites. Compared with those of EP/4CuAl-(SDS)LDH nanocomposites, the peak heat release rate (PHRR) of EP/4CuAl-(SPP)LDH nanocomposites is reduced 25.8% and 55.6%, and peak smoke production rate (PSPR) value of EP/4CuAl-(SPP)LDH nanocomposites is reduced 27.6% and 46.2%, value of EP/4CuAl-(SPP)LDH nanocomposites is reduced 27.6% and 46.2%, respectively. The improved flame retardancy and smoke suppression performances of EP/CuAl-(SPP)LDH nanocomposites were attributed to the combination of copper compounds and SPP, promoting the formation of swollen, continuous and compact char layers on the surface of EP nanocomposites during combustion, eventually restraining the decomposition of EP nanocomposites.