Factors influencing the electroreductive polymerization of di‐n‐hexyldichlorosilane

This paper reports the study of the effects of solvent, support electrolyte and the nature of the electrodes on the electroreduction of di‐n‐hexyldichlorosilane. The work performed involved the use of different types of sacrificial anode (magnesium, aluminium and zinc) and cathode (magnesium, aluminium, zinc, stainless steel, nickel, carbon and palladium) in tetrahydrofuran containing lithium perchlorate (LiClO₄). Monomodal poly(di‐n‐hexyldichlorosilane) was obtained with Al/Al and Mg/Mg electrode pairs, but the polymer yield was about ten times higher with Al/Al (11%) than with Mg/Mg (1%). From the solvents and co‐solvents used (tetrahydrofuran, hexamethylphosphorotriamide, acetone, hexane, toluene, 1,1,3,3‐tetramethylurea, tris(3,6‐dioxaheptyl)amine, 1,2‐dimethoxyethane, N,N‐dimethylacetamide and dimethylformamide) with LiClO₄, only the system tetrahydrofuran + hexamethylphosphorotriamide, tetrahydrofuran + N,N‐dimethylacetamide and tetrahydrofuran + toluene have given monomodal poly(di‐n‐hexyldichlorosilane) using an aluminium anode and stainless‐steel cathode. Copyright © 2001 John Wiley & Sons, Ltd.     

Computational study of pH‐responsive di‐lanthanide complexes

Lanthanide complexes have found extensive use as luminescent probes for biological and medical investigations. Recently, a di‐europium complex that exhibits pH‐dependent luminescence‐decay was reported, and the ligand in that complex includes a large number of ionizable sites. To better understand the pH‐dependence of luminescence‐decay of this complex, the pK _a's of all tautomers of the di‐Lu³⁺ version of this complex were calculated computationally. The calculated Boltzmann‐averaged pK _a's of the complex are 5.85, ?0.21, and ?1.47 for the di‐Lu³⁺ complex in its first, second, and third protonation states, respectively. These pK _a values across protonation states indicate that changes in luminescence‐decay rate at physiologically relevant pH may be related to first protonation event of the complex exclusively.     

Preparation,antitumor activity in mice,pharmacokinetics and tissue distribution in rats of di‐n‐butyl‐di‐(4‐chlorobenzohydroxamato)tin(IV) liposome

Di‐n‐butyl‐di‐(4‐chlorobenzohydroxamato)tin(IV) (DBDCT) is an antitumor compound with high activity and relatively low bioavailability. In order to improve the pharmacokinetic characteristics and raise its therapeutic index, a liposome of DBDCT (DBDCT‐L) was prepared for the first time. A study of the pharmacokinetics and tissue distribution after intravenous administration of DBDCT‐L compared with free DBDCT to rats was investigated. DBDCT‐L showed a slower clearance, increased half‐time and a larger AUC value than those of free DBDCT, which demonstrated that DBDCT‐L could significantly alter the tissue distribution pattern of DBDCT in rats. The highest concentration distribution for DBDCT‐L was detected in liver, which may be associated with the enhanced antitumor activity in vivo against hepatocellular carcinoma H₂₂ and possible target release of the compound. Acute toxicity assay showed that the LD₅₀ value of DBDCT‐L was higher than that of free DBDCT. Further in vivo antitumor test showed that DBDCT‐L displayed higher antitumor activity against the hepatocellular carcinoma H₂₂ than free DBDCT, indicating that the liposome could prolong the action time of DBDCT in the system circulation, change its distribution in rats, reduce acute toxicity and finally increase antitumor activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Modified cyclopentadienyl molybdenum compounds with enhanced cytotoxic activity towards MOLT‐4 leukaemia cells

A series of new cyclopentadienyl molybdenum compounds bearing substituted phenanthroline ligands [(η⁵‐C₅H₄CH₂C₆H₄X‐4)Mo(CO)₂(^N,NL)][BF₄] (X = F, Cl, Br; ^N,NL = phen, 5‐NH₂‐phen, 4,7‐Ph₂‐phen) was prepared and characterized using infrared and NMR spectroscopies. Crystal structures of [(η⁵‐C₅H₄CH₂C₆H₄F‐4)Mo(CO)₂(NCMe)₂][BF₄], [(η⁵‐C₅H₄CH₂C₆H₄X‐4)Mo(CO)₂(phen)][BF₄] (X = F, Cl, Br) and [(η⁵‐C₅H₄CH₂C₆H₄Cl‐4)Mo(CO)₂(4,7‐Ph₂‐phen)][BF₄]⋅(4,7‐Ph₂‐phen)⋅HBF₄ were determined using X‐ray diffraction analysis. Biological studies revealed a strong cytotoxic effect of the chelating ligands. Although the cytostatic effect of the halogen in the side chain of the cyclopentadienyl ring is negligible, it could be used for future post‐modification of these types of cytotoxic active molybdenum‐based compounds.     

Packing Studies on Poly(di‐n‐alkylsilylenemethylene)s

The packing of poly(di‐n‐alkylsilylenemethylene) (PDASMs) chains was studied by using X‐ray, electron diffraction, and molecular modeling methods. X‐ray and electron diffraction measurements revealed unit cells in which the PDASMs were efficiently packed. The PDASM with the longer alkyl side chains, such as poly(di‐n‐propylsilylenemethylene) (PDPrSM), showed packing with the alkyl side chains interlocked with each other like cross‐shaped gears in the two‐dimensional monoclinic unit cell. The PDASM with the shorter ethyl substituent, poly(di‐n‐ethylsilylenemethylene) (PDESM), showed a lack of ability to interlock its side chains due to the short length of the alkyl groups. In these studies, we found that the length of the alkyl side chains could change the packing arrangement of PDASMs from monoclinic to orthorhombic to hexagonal with only short‐range order as the alkyl side chain length decreases at room temperature.

The ab projection of a 4 × 4 chain array of poly(di‐n‐propylsilylenemethylene) (PDPSM) in the monoclinic unit cell.     

Antioxidative vs cytotoxic activities of organotin complexes bearing 2,6‐di‐tert‐butylphenol moieties

Two series of organotin(IV) complexes with Sn–S bonds on the base of 2,6‐di‐tert‐butyl‐4‐mercaptophenol ( L ¹ SH ) of formulae Me₂Sn(L¹S)₂ ( 1 ); Et₂Sn(L¹S)₂ ( 2 ); Bu₂Sn(L¹S)₂ ( 3 ); Ph ₂ Sn(L¹S)₂ ( 4 ); (L¹)₂Sn(L¹S)₂ ( 5 ); Me₃Sn(L¹S) ( 6 ); Ph₃Sn(L¹S) ( 7 ) (L¹ = 3,5‐di‐tert‐butyl‐4‐hydroxyphenyl), together with the new ones [Me₃SnCl(L²)] ( 8 ), [Me₂SnCl₂(L²)₂] ( 9 ) ( L ²  = 2‐(N‐3′,5′‐di‐tert‐butyl‐4′‐hydroxyphenyl)‐iminomethylphenol) were used to study their antioxidant and cytotoxic activity. Novel complexes 8 , 9 of Me_nSnCl_4 ? n (n = 3, 2) with Schiff base were synthesized and characterized by ¹H, ¹³C NMR, IR and elemental analysis. The crystal structures of compounds 8 and 9 were determined by X‐ray diffraction analysis. The distorted tetrahedral geometry around the Sn center in the monocrystals of 8 was revealed, the Schiff base is coordinated to the tin(IV) atom by electrostatic interaction and formation of short contact Sn–O 2.805 Å. In the case of complex 9 the distorted octahedron coordination of Sn atom is formed. The antioxidant activity of compounds as radical scavengers and reducing agents was proved spectrophotometrically in tests with stable radical DPPH, reduction of Cu²⁺ (CUPRAC method) and interaction with superoxide radical‐anion. Moreover, compounds have been screened for in vitro cytotoxicity on eight human cancer cell lines. A high activity against all cell lines with IC₅₀ values 60–160 nM was determined for the triphenyltin complex 7 , while the introduction of Schiff base decreased the cytotoxicity of the complexes. The influence on mitochondrial potential and mitochondrial permeability for the compounds 8 and 9 has been studied. It is shown that studied complexes depolarize the mitochondria but don't influence the calcium‐induced mitochondrial permeability transition.     

Predicting reduction potentials of 1,3,6‐triphenyl fulvenes using molecular electrostatic potential analysis of substituent effects

The influence of mono‐ and multiple substituent effect on the reduction potential (E⁰) of 1,3,6‐triphenyl fulvenes is investigated using B3LYP‐SMD/6‐311+G(d,p) level density functional theory. The molecular electrostatic potential (MESP) minimum at the fulvene π‐system (V_min) and the change in MESP at any of the fulvene carbon atoms (ΔV_C) for both neutral and reduced forms are used as excellent measures of substituent effect from the para and meta positions of the 1,3 and 6‐phenyl moieties. Substitution at 6‐phenyl para position has led to significant change in E⁰ than any other positions. By applying the additivity rule of substituent effects, an equation in ΔV_C is derived to predict E⁰ for multiply substituted fulvenes. Further, E⁰ is predicted for a set of 2000 hexa‐substituted fulvene derivatives where the substituents and their positions in the system are chosen in a random way. The calculated E⁰ agreed very well with the experimental E⁰ reported by Godman et al. Predicting E⁰ solely by substituent effect offers a simple and powerful way to select suitable combinations of substituents on fulvene system for light harvesting applications. © 2018 Wiley Periodicals, Inc.     

Quenching of metal‐catalyzed living radical polymerization with silyl enol ethers

Various silyl enol ethers were employed as quenchers for the living radical polymerization of methyl methacrylate with the R Cl/RuCl₂(PPh₃)₃/Al(Oi–Pr)₃ initiating system. The most effective quencher was a silyl enol ether with an electron‐donating phenyl group conjugated with its double bond [CH₂C(OSiMe₃)(4‐MeOPh) ( 2a )] that afforded a halogen‐free polymer with a ketone terminal at a high end functionality [F̄_n ∼ 1]. Such silyl compounds reacted with the growing radical generated from the dormant chloride terminal and the ruthenium complex to give the ketone terminal via the release of the silyl group along with the chlorine that originated from the dormant terminal. In contrast, less conjugated silyl enol ethers such as CH₂C(OSiMe₃)Me were less effective in quenching the polymerization. The reactivity of the silyl compounds to the poly(methyl methacrylate) radical can be explained by the reactivity of their double bonds, namely, the monomer reactivity ratios of their model vinyl monomers without the silyloxyl groups. The lifetime of the living polymer terminal was also estimated by the quenching reaction mediated with 2a . © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4735–4748, 2000     

A Study on the Reaction of 1-（3-Pyridyl）-2,2-di-substituted Ethylenes with 1-Benzyl-1,4-dihydronicotinamide

The reaction of a series of 1-（3-pyridyl）-2,2-di-substituted ethylenes with 1-benzyl-1,4-dihydronicotinamide （BNAH） in deaerated acetonitrile produces the corresponding 1-（3-pyridyl）-2,2-di-substituted ethanes in contrast to benzylidenemalononitrile （BM） which does not react with BNAH under the same conditions.     

Changes in the NMR characteristics of 3,6‐di‐tert‐butylquinone on formation of paramagnetic complexes

High‐resolution NMR spectra of 3,6‐di‐tert‐butylquinone were recorded and analyzed for the first time in a wide range of temperatures. The spectra were transformed by paramagnetic additives of cobalt, nickel, and copper complexes synthesized on the basis of metal semiquinolates. Chloroform, dimethylsulfoxide, toluene, and acetone were used as solvents. It was shown that the spectra changed by paramagnetic additives can contain valuable information on the nature of a superfine interaction in paramagnetic complexes and on peculiarities of intramolecular dynamics inherent in these compounds. Copyright © 2013 John Wiley & Sons, Ltd.     

Reaction control in radical polymerization of di‐n‐butyl itaconate utilizing a hydrogen‐bonding interaction

We have reported that intramolecular chain‐transfer reaction takes place in radical polymerization of itaconates at high temperatures and/or at low monomer concentrations. In this article, radical polymerizations of di‐n‐butyl itaconate (DBI) were carried out in toluene at 60 °C in the presence of amide compounds. The ¹³C‐NMR spectra of the obtained poly(DBI)s indicated that the intramolecular chain‐transfer reaction was suppressed as compared with in the absence of amide compounds. The NMR analysis of DBI and N‐ethylacetamide demonstrated both 1:1 complex and 1:2 complex were formed at 60 °C through a hydrogen‐bonding interaction. The ESR analysis of radical polymerization of diisopropyl itaconate (DiPI) was conducted in addition to the NMR analysis of the obtained poly(DiPI). It was suggested that the suppression of the intramolecular chain‐transfer reaction with the hydrogen‐bonding interaction was achieved by controlling the conformation of the side chain at the penultimate monomeric unit of the propagating radical with an isotactic stereosequence. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4895–4905, 2004     

Synthesis and NMR characterization of 6‐Phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose

Cellulose ( 1 ) was converted for the first time to 6‐phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 6 ) in 33% overall yield. Intermediates in the five‐step conversion of 1 to­ 6 were: 6‐O‐tritylcellulose ( 2 ), 6‐O‐trityl‐2,3‐di‐O‐methylcellulose ( 3 ), 2,3‐di‐O‐methylcellulose ( 4 ); and 6‐bromo‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 5 ). Elemental and quantitative carbon‐13 analyses were concurrently used to verify and confirm the degrees of substitution in each new polymer. Gel permeation chromotography (GPC) data were generated to monitor the changes in molecular weight (DP_w) as the synthesis progressed, and the compound average decrease in cellulose DP_w was ～ 27%. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the decomposition of all polymers. The degradation temperatures ( °C) and percent char at 500 °C of cellulose derivatives 2 to 6 were 308.6 and 6.3%, 227.6 °C and 9.7%, 273.9 °C and 30.2%, 200.4 °C and 25.6%, and 207.2 °C and 27.0%, respectively. The glass transition temperature (T_g) of­6‐O‐tritylcellulose by dynamic mechanical analysis (DMA) occurred at 126.7 °C and the modulus (E′, Pa) dropped 8.9 fold in the transition from ?150 °C to + 180 °C (6.6 × 10⁹ to 7.4 × 10⁸ Pa). Modulus at 20 °C was 3.26 × 10⁹ Pa. Complete proton and carbon‐13 chemical shift assignments of the repeating unit of the title polymer were made by a combination of the HMQC and COSY NMR methods. Ultimate non‐destructive proof of carbon–carbon bond formation at C6 of the anhydroglucose moiety was established by generating correlations between resonances of CH₂6 (anhydroglucose) and C1′, H2′, and H6′ of the attached aryl ring using the heteronuclear multiple‐bond correlation (HMBC) method. In this study, we achieved three major objectives: (a) new methodologies for the chemical modification of cellulose were developed; (b) new cellulose derivatives were designed, prepared and characterized; (c) unequivocal structural proof for carbon–carbon bond formation with cellulose was derived non‐destructively by use of one‐ and two‐dimensional NMR methods. Copyright © 2002 John Wiley & Sons, Ltd.     

Chain‐transfer reaction in the radical polymerization of di‐n‐butyl itaconate at high temperatures

Radical polymerizations of di‐n‐butyl itaconate were investigated. Unexpected resonances (C resonances) were observed in ¹³C NMR spectra of C?O of poly(di‐n‐butyl itaconate)s [poly(DBI)s] obtained at temperatures higher than 60 °C, although two kinds of carbonyl groups showed splittings due to triad tacticities in the spectra of polymers obtained at lower temperatures. The poly(DBI)s formed by the different kinds of initiators or formed in the presence of chain‐transfer agents showed hardly any changes in the intensities of the C resonances; this indicated that the C resonances were not due to the structures formed through initiating and terminating reactions. The poly(DBI)s obtained at different yields showed only a slight increase in the intensities of the C resonances with the yield, which suggested that the C resonances were not attributable to the intermolecular chain‐transfer reaction to the monomer and/or polymer. However, the intensities of the C resonances significantly increased with a decreasing feed monomer concentration; this suggested that intramolecular chain‐transfer reactions took place at high temperatures. Furthermore, a Cu complex‐catalyzed atom transfer radical polymerization mechanism was revealed to be effective for suppressing the intramolecular chain‐transfer reaction at 60 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2415–2426, 2002     

Palladium‐anchored multidentate SBA‐15/di‐urea nanoreactor: A highly active catalyst for Suzuki coupling reaction

Modification of mesoporous silica was carried out by reaction of SBA‐15 with di‐urea‐based ligand. Next, with the help of this ligand, palladium ions were anchored within the multidentate SBA‐15/di‐urea pore channels with high dispersion. The SBA‐15/di‐urea/Pd catalyst was characterized using various techniques. Theoretical calculations indicated that each palladium ion was strongly interacted with one nitrogen and two oxygen atoms from the multidentate di‐urea ligand located in SBA‐15 channels and these interactions remained during the catalytic cycle. These results are in good agreement with those of hot filtration test: the palladium ions have very high stability against leaching from the SBA‐15/di‐urea support. The catalytic performance of SBA‐15/di‐urea/Pd nanostructure was examined for the Suzuki coupling reaction of phenylboronic acid and electronically diverse aryl halides under mild conditions with a minimal amount of Pd (0.26 mol%). Compared to previous reports, this protocol afforded some advantages such as short reaction times, high yields of products, catalyst stability without leaching, easy catalyst recovery and preservation of catalytic activity for at least six successive runs.     

Aligning poly[1,6‐di‐(N‐carbazolyl)‐2,4‐hexadiyne] crystalline fibers as conducting channels for transistor applications

Aligned crystallites of 1,6‐di‐(N‐carbazolyl)‐2,4‐hexadiyne (DCHD) were prepared on the phenyltrichlorosilane‐modified SiO₂/Si surface using the brush‐coating method. The length and width as well as the orientation of the crystallites depend on the coating speed. At a lower coating speed of 0.2 ~ 0.3 mm/s, well‐separated fibers with a width of 1–2 μm and a length of hundreds of μm were grown along the coating direction. Higher speeds resulted in shorter fibers together with randomly oriented tiny crystallites appearing in between. The diacetylene crystallites upon UV irradiation gave polydiacetylene fibers with deformations along the fiber axis. The poly(ene‐yne) backbones were shown to align along the fiber axes. With these poly‐DCHD fibers as a conducting channel for transistor fabrication, a highest field‐effect mobility of 0.039 cm²/Vs was obtained.     

Attempt to Synthesize Hindered 2,4,6‐Tri‐Aryloxy‐s‐Triazines: Bis(2,4‐di‐tert‐Butylphenyl) Carbonate – Crystal Structure

Some less hindered 2,4,6‐tri‐aryloxy‐s‐triazines were synthesized through the reaction of the corresponding phenols as a starting materials with cyanogen bromide (BrCN) to obtain the corresponding arylcyanates and then trimerized. Unexpectedly, 2,4‐di‐tert‐butyl‐1‐cyanatobenzene derived from 2,4‐di‐tert‐butylphenol did not trimerize but, indeed, yielded bis(2,4‐di‐tert‐butylphenyl) carbonate. The structures of 2,4,6‐tri‐aryloxy‐s‐triazines and bis(2,4‐di‐tert‐butylphenyl) carbonate were characterized by means of IR, ¹H, and ¹³C NMR spectroscopies. Also the structure of the latter compound was studied by X‐ray crystallography.     

Synthesis and properties of fluorinated polyimides based on 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐2,5‐di‐tert‐butylbenzene and various aromatic dianhydrides

A novel fluorinated diamine monomer, 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐2,5‐di‐tert‐butylbenzene ( 2 ), was prepared through the nucleophilic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride and 2,5‐di‐tert‐butylhydroquinone in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Fluorinated polyimides ( 5a – 5f ) were synthesized from diamine 2 and various aromatic dianhydrides ( 3a – 3f ) via thermal or chemical imidization. These polymers had inherent viscosities of 0.77–1.01 dL/g. The 5 series polyimides were soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, and N,N‐dimethylformamide and were even soluble in dioxane, tetrahydrofuran, and dichloromethane. 5 (C) showed cutoff wavelengths between 363 and 404 nm and yellowness index (b*) values of 6.5–40.2. The polyimide films had tensile strengths of 93–114 MPa, elongations to break of 9–12%, and initial moduli of 1.7–2.1 GPa. The glass‐transition temperatures were 255–288 °C. The temperatures of 10% weight loss were all above 460 °C in air or nitrogen atmospheres. In comparison with a nonfluorinated polyimide series based on 1,4‐bis(4‐aminophenoxy)‐2,5‐di‐tert‐butylbenzene, the 5 series showed better solubility and lower color intensity, dielectric constants, and moisture absorption. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2272–2284, 2004     

Isomerization polymerization and copolymerization of glycidyl alkanoates catalyzed by methylaluminum bis(2,6‐di‐t‐butyl‐4‐methylphenoxide)

The isomerization polymerizations of glycidyl propionate (1b), octanoate (1c), and stearate (1d) with methylaluminum bis(2,6‐di‐tert‐butyl‐4‐methylphenoxide) (3) were investigated. The polymerizations selectively gave poly(2‐alkyl‐1,3‐dioxolane‐4,2‐diyloxymethylene)s (2), although the polymer yield as well as the polymer molecular weight significantly decreased as the acyl chain of 1 was lengthened. These polymers readily hydrolyzed to glycerin and the corresponding fatty acids under mild conditions. The copolymerizations of glycidyl acetate (1a) with these monomers were also examined. In any combination, the composition of the obtained copolymer was essentially identical with the feed ratio, while both copolymer yield and molecular weight decreased as the feed of 1a was decreased. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 435–444, 1999 (See graphics.)