Novel D − π − A dye sensitizers of polymeric metal complexes based on 8‐hydroxyquinoline and phenylethyl or fluorene units: synthesis,characterization and photovoltaic applications for dye‐sensitized solar cells

Four novel donor ? π‐bridge ? acceptor (D ? π ? A) polymeric metal complexes (P1–P4) based on 8‐hydroxyquinoline metal complexes were synthesized and tested for their performance in dye‐sensitized solar cells (DSSCs). The polymeric metal complexes dyes use alkoxy benzene or alkyl fluorene as the electron donor and C=C as π linker; the 8‐hydroxyquinoline derivative complex part was used as the electron acceptor and diaminomaleonitrile was used as ancillary ligand. The two strongly electron‐withdrawing cyano groups in the polymer structure can provide an efficient charge transport in the intramolecular between donor and acceptor parts. The thermal, photophysical, electrochemical and photovoltaic properties of these copolymers were investigated by TGA, differential scanning calorimetry, cyclic voltammetry and cureent density‐voltage curves, and the results showed that dye containing complex Zn(II) and alkoxy benzene unit benefited the generation of photocurrent and open‐circuit voltages, and a maximum power conversion efficiency of 1.91% (P2) was obtained, with an open‐circuit voltage of 0.71 V, a short‐circuit current density of 4.23 mA cm^?2, and a fill factor of 38.6% under AM1.5G irradiation. The study results also show that the four polymers exhibit good thermal stability, indicating that these polymeric metal complexes are suitable for the fabrication processes of optoelectronic devices. Copyright © 2013 John Wiley & Sons, Ltd.     

D–π–A polysulfones for blue electroluminescence

Donor–π–acceptor type fluorene‐based copolymers with a sulfone unit were designed and synthesized for application in efficient pure‐blue light emitting. The electroluminescence behaviors of these copolymers were investigated by fabricating light‐emitting diodes and electrochemical cell devices. The former device little functioned but the latter worked well. The electrochemical cell devices having a configuration of ITO/PEDOT:PSS/copolymer:ionic liquid/Al exhibited purplish blue electroluminescence with an emission maximum at 434 nm (CIE coordinates (x, y) = (0.17, 0.10)) measured at 7 V. The initial positive scan of the D–π–A polysulfone based light emitting electrochemical cell with a sweep rate of 0.1 V s^?1 afforded a maximum luminance of 1080 cd m^?2 with a current efficiency of 1.96 cd A^?1 at an operating voltage of 12.5 V. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3454–3461     

Bandgap engineering of indenofluorene‐based conjugated copolymers with pendant donor‐π‐acceptor chromophores for photovoltaic applications

Three narrow‐band‐gap conjugated copolymers based on indenofluorene and triphenylamine with pendant donor‐π‐acceptor chromophores were successfully synthesized by post‐functionalization approach. All the polymers have good solubility in common solvents and excellent thermal stability. The photophysical properties, energy levels and band gaps of the polymers were well manipulated by introducing different acceptor groups onto the end of their conjugated side chains. By using different acceptor groups, the band gaps of the polymers were narrowed from 1.86 to 1.53 eV by lowering their lowest unoccupied molecular orbital levels, whereas their relatively deep highest occupied molecular orbital levels of approximately ?5.35 eV were maintained. Bulk‐heterojunction solar cells with these polymers as electron donors and (6,6)‐phenyl‐C₇₁‐butyric acid methyl ester as acceptor showed power conversion efficiencies as high as 3.1% and high open circuit voltages more than 0.88 eV. The relationships between the performance and film morphology, energy levels, charge mobilities were discussed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Design,synthesis, and characterization of a novel c‐donor‐nc‐bridge‐c‐acceptor type block copolymer for optoelectronic applications

A novel conjugated block copolymer system containing a donor‐type conjugated block (c‐D) covalently connected to an acceptor type conjugated block (c‐A) via a nonconjugated and flexible bridge chain (nc‐B), also called a DBA type block copolymer, has been designed, synthesized, and characterized for potential cost‐effective and high‐efficiency optoelectronic applications such as solar cells. Specifically, D is a regio‐regular para‐2‐ethylhexyloxy‐substituted polyphenylenevinylene (or EH‐RO‐PPV), A is a regio‐regular polyphenylenevinylene with sulfone (SO₂) acceptor moiety and a linear oxydecane (‐OC₁₀H₂₁) group substituted on every phenylene unit, and B contains an aliphatic chain with two or four methylene units. The size of each block can be controlled via synthetic feed ratio of the monomer and the terminator. The measured average molecular weights of D, A, and DBA based on gel permission chromatography are in good agreements with the molecular weights calculated using the monomer:terminator synthetic feed ratios. Preliminary optoelectronic device studies revealed an order of magnitude better improvement in photoelectric power conversion efficiency of DBA over the corresponding D/A blend under identical fabrication and testing conditions. Such improvements could be attributed to more efficient photo induced charge separation and charge transport in DBA versus in D/A blends. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1149–1160     

The Structure‐property Relationships of D‐π‐A BODIPY Dyes for Dye‐sensitized Solar Cells

BODIPY dyes have attracted considerable attention as potential photosensitizers in dye‐sensitized solar cells (DSSCs) owing to their excellent optical properties and facile structural modification. This account focuses on recent advances in the molecular design of D‐π‐A BODIPY dyes for applications in DSSCs. Special attention has been paid to the structure‐property relationships of D‐π‐A BODIPY dyes for DSSCs. The developmental process in the modified position at the BODIPY core with a donor/acceptor is described. The devices based on 2,6‐modified BODIPY dyes exhibit better photovoltaic performance over other modified BODIPY dyes. Meanwhile, the research reveals the correlation of molecular structures (various donor chromophores, extended units, molecular frameworks, and long alkyl groups) with their photophysical and electrochemical properties and relates it to their performance in DSSCs. The structure‐property relationships give valuable information and guidelines for designing new D‐π‐A BODIPY dyes for DSSCs.

     

Synthesis and photovoltaic properties of main chain polymeric metal complexes containing 1,10‐phenanthroline metal complexes conjugating alkyl fluorene or alkoxy benzene by C═C bridge for dye‐sensitized solar cells

Four main chain polymeric metal complexes (P1–P4) based on 1,10‐phenanthroline metal complexes via the Heck coupling have been synthesized and characterized by Fourier transform infrared spectroscopy, ¹H NMR, UV–Vis absorption, photoluminescence spectroscopy, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, elemental analysis, and cyclic voltammetry. To investigate their photovoltaic properties, the dye‐sensitized solar cells based on these polymers dyes are studied, under the illumination of AM 1.5G, 100 mW/cm². The study results show the four polymers exhibit good thermally stable and the solar cells based on them have good device performance, and the maximum power conversion efficiency is up to 0.735% for the solar cells based on P3 with a short‐circuit current (J_sc) of 1.68 mA/cm² and an open‐circuit voltage (V_oc) of 0.62 V. Copyright © 2012 John Wiley & Sons, Ltd.     

Shape and location of multiple charge carriers in linear π‐electron systems

We have performed a quantum‐mechanical study of a series of neutral polyenes, their multiply charged ions, and related ionic polymethines with a closed electron shell, using different methods/basis with/without electron correlations. The study shows that a multiple injection of charge carriers into a collective system of π‐electrons causes a formation of distinctive electron levels in the energy gap along with a simultaneous regular gap shift in accordance to the number of injected carriers. Each charge generates its own solitonic electron density alternation wave on adjacent carbon atoms, as well as similar bond length and valence angle alternation waves. Established regularities in charge distribution and variations of bond lengths and valence angles may be used in the molecular design of organic semiconducting materials. © 2013 Wiley Periodicals, Inc.     

Comparative studies on group III σ‐hole and π‐hole interactions

The σ‐hole of M₂H₆ (M = Al, Ga, In) and π‐hole of MH₃ (M = Al, Ga, In) were discovered and analyzed, the bimolecular complexes M₂H₆···NH₃ and MH₃···N₂P₂F₄ (M = Al, Ga, In) were constructed to carry out comparative studies on the group III σ‐hole interactions and π‐hole interactions. The two types of interactions are all partial‐covalent interactions; the π‐hole interactions are stronger than σ‐hole interactions. The electrostatic energy is the largest contribution for forming the σ‐hole and π‐hole interaction, the polarization energy is also an important factor to form the M···N interaction. The electrostatic energy contributions to the interaction energy of the σ‐hole interactions are somewhat greater than those of the π‐hole interactions. However, the polarization contributions for the π‐hole interactions are somewhat greater than those for the σ‐hole interactions. © 2016 Wiley Periodicals, Inc.     

Phenylcarbamoylated β‐CD: π‐Acidic and π‐basic chiral selectors for HPLC

Two types of chiral stationary phases for HPLC based on π‐acidic or π‐basic perphenylcarbamoylated β‐CDs were synthesized. The relative structural features of the two effective chiral selectors are discussed and compared in both normal‐phase and RP modes. In addition, the nature and concentration of alcoholic modifiers were varied for optimal separation in normal phase and the structural variation of the analytes was also examined. The results showed that hydrogen bonding, steric effect and π‐acidic–π‐basic interaction contributed greatly to enantioseparation. Upon comparison, some of the differences in the separation behavior of the two types of chiral stationary phases might be due to the π‐acidic or π‐basic phenylcarbamate groups.     

Ab initio and AIM studies on typical π‐type and pseudo‐π‐type halogen bonds: Comparison with hydrogen bonds

Series of typical π‐type and pseudo‐π‐type halogen‐bonded complexes B ··· ClY and B ··· BrY and hydrogen‐bonded complex B ··· HY (B = C₂H₄, C₂H₂, and C₃H₆; Y = F, Cl, and Br) have been investigated using the MP2/aug‐cc‐pVDZ method. A striking parallelism was found in the geometries, vibrational frequencies, binding energies, and topological properties between B ··· XY and B ··· HY (X = Cl and Br). It has been found that the lengths of the weak bond d(X ··· π)/d(H ··· π), the frequencies of the weak bond ν(X ··· π)/ν(H ··· π), the frequency shifts Δν(X? Y)/Δν(H? Y), the electron densities at the bond critical point of the weak bonds ρ_c(X ··· π)/ρ_c(H ··· π), and the electron density changes Δρ_c(X? Y)/Δρ_c(H? Y) could be used as measures of the strengths of typical π‐type and pseudo‐π‐type halogen/hydrogen bonds. The typical π‐type and pseudo‐π‐type halogen bond and hydrogen bond are noncovalent interactions. For the same Y, the halogen bond strengths are in the order B ··· ClY < B ··· BrY. For the same X, the halogen bond strength decreases according to the sequence F > Cl > Br that is in agreement with the hydrogen bond strengths B ··· HF > B ··· HCl > B ··· HBr. All of these typical π‐type and pseudo‐π‐type hydrogen‐bonded and halogen‐bonded complexes have the “conflict‐type” structure. Contour maps of the Laplacian of π electron density indicate that the formation of B ··· XY halogen‐bonded complex and B ··· HY hydrogen‐bonded complex is very similar. Charge transfer is observed from B to XY/HY and both the dipolar polarization and the volume of the halogen atom or hydrogen atom decrease on B ··· XY/B ··· HY complex formation. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Photophysical properties of σ–π‐conjugated alternating oligothienylene–oligosilylene polymers

UV‐visible absorption and fluorescence properties of three series of σ–π‐conjugated polymers (copolymers of alternative oligothienylene and oligosilylene units) have been studied in dioxane solution. The energies of the absorption maximum, fluorescence maximum, and the 0–0 transition are found to be linearly dependent on the reciprocal of the number of thiophene rings in the repeating unit of the polymer chain, but almost independent of the silicon atom number. The σ–π‐conjugation in the polymers results in red shift in the absorption and fluorescence maxima, higher fluorescence quantum yields, and longer fluorescence lifetimes of the polymers, with respect to their corresponding analogous α‐oligothiophenes. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1873–1880, 1999     

A–π–D–π–A Electron‐Donating Small Molecules for Solution‐Processed Organic Solar Cells: A Review

Organic solar cells based on semiconducting polymers and small molecules have attracted considerable attention in the last two decades. Moreover, the power conversion efficiencies for solution‐processed solar cells containing A–π–D–π–A‐type small molecules and fullerenes have reached 11%. However, the method for designing high‐performance, photovoltaic small molecules still remains unclear. In this review, recent studies on A–π–D–π–A electron‐donating small molecules for organic solar cells are introduced. Moreover, the relationships between molecular properties and device performances are summarized, from which inspiration for the future design of high performance organic solar cells may be obtained.     

Facile Fabrication of Solid‐state Electrochemiluminescence Sensor via Non‐covalent π‐π Stacking and Covalent Bonding on Graphite Electrode

Herein, a facile and efficient method was developed for fabrication of solid‐state electrochemiluminescence (ECL) sensor via non‐covalent π‐π stacking and covalent bonding on the graphite electrode (GE) surface. The electrode was firstly modified with 1‐aminopyrene via π‐π stacking between GE surface and the pyrene moiety. Thereafter a stable and efficient solid‐state ECL sensor was fabricated by covalent immobilization of ruthenium(II) onto the GE surface via amidation reaction between the 1‐aminopyrene and bis(2,2′‐bipyridyl)(4‐methyl‐4′‐carboxypropyl‐2,2′‐bipyridyl) ruthenium(II) bishexafluorophosphate. The sensor has been investigated using tripropylamine and tetracycline as representative analytes, and low detection limits of 0.7 nM and 3.5 nM (S/N=3) were reached, respectively.     

Effects of donor unit and π‐bridge on photovoltaic properties of D–A copolymers based on benzo[1,2‐b:4,5‐c']‐dithiophene‐4,8‐dione acceptor unit

A series of donor‐π‐acceptor (D‐π‐A) conjugated copolymers ( PBDT‐AT, PDTS‐AT, PBDT‐TT , and PDTS‐TT ), based on benzo[1,2‐b:4,5‐c']dithiophene‐4,8‐dione (BDD) acceptor unit with benzodithiophene (BDT) or dithienosilole (DTS) as donor unit, alkylthiophene (AT) or thieno[3,2‐b]thiophene (TT) as conjugated π‐bridge, were designed and synthesized for application as donor materials in polymer solar cells (PSCs). Effects of the donor unit and π‐bridge on the optical and electrochemical properties, hole mobilities, and photovoltaic performance of the D‐π‐A copolymers were investigated. PSCs with the polymers as donor and PC₇₀BM as acceptor exhibit an initial power conversion efficiency (PCE) of 5.46% for PBDT‐AT , 2.62% for PDTS‐AT , 0.82% for PBDT‐TT , and 2.38% for PDTS‐TT . After methanol treatment, the PCE was increased up to 5.91%, 3.06%, 1.45%, and 2.45% for PBDT‐AT, PDTS‐AT, PBDT‐TT , and PDTS‐TT , respectively, with significantly increased FF. The effects of methanol treatment on the photovoltaic performance of the PSCs can be ascribed to the increased and balanced carrier transport and the formation of better nanoscaled interpenetrating network in the active layer. The results indicate that both donor unit and π‐bridge are crucial in designing a D‐π‐A copolymer for high‐performance photovoltaic materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1929–1940     

Tuning the π‐π stacking distance and J‐aggregation of DPP‐based conjugated polymer via introducing insulating polymer

The close π–π stacking and the high J‐aggregation during the formation of fibrillar morphology in films of the poly[[2,5‐bis(2‐octyldodecyl)?2,3,5,6‐tetrahydro‐3,6‐dioxopyrrolo[3,4‐c]pyrrole‐1,4‐diyl]‐alt–[[2,2′‐(2,5‐thiophene)bis‐thieno[3,2‐b]thiophen]‐5,5′‐diyl]] (PDPPTT‐T) are demonstrated via blending with polystyrene (PS). The hydrodynamic radius (R_h) of PDPPTT‐T is decreased from 16.7 nm in the neat solution to 12.7 nm in the blend solution at the ratio of 1/20(PDPPTT‐T/PS). This phenomenon suggests that blending PS is beneficial for the disentanglement of PDPPTT‐T. The disentanglement of PDPPTT‐T facilitates the formation of fibrillar morphology. The growth of the fibrils occurs along the molecular backbones and the width of the fibrils is parallel to the π–π stacking direction. The disentanglement of PDPPTT‐T helps the molecules adjust conformation to improve J‐aggregation and decrease the π–π stacking distance. The maximum absorption is red‐shifted from 825 nm to 849 nm and the relative intensity of J‐aggregation (the 0‐0/0‐1 ratio) is increased from 1.19 to 1.60. The π–π stacking distance decreases from 3.57 to 3.52 Å. The charge‐carrier mobility will be improved in the fibrillar morphology with close π–π stacking and high J‐aggregation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 838–847     

Donor–acceptor conjugated copolymers incorporating tetrafluorobenzene as the π‐electron deficient unit

We present the synthesis and characterization of a new family of perfectly alternating conjugated polymers, obtained through different methodologies (Stille, Direct Arylation, and Horner–Wadsworth–Emmons polymerizations). The polymers comprise either 2,5‐dialkoxybenzene or benzodithiophene electron rich units, and 1,2,4,5‐tetrafluorobenzene as the electron‐deficient unit, eventually separated by a vinylene bridge, if suitable monomers and HWE polymerization procedures are used. As shown by NMR spectroscopy, the introduction of the fluorinated aromatic units brings complications in the polymer stereodefinition in the HWE polymerization, and regiodefinition in the case of the Direct Arylation. The polymers show moderate degrees of polymerization (up to 10 repeating alternating units in the backbone), which are however significant enough to unravel interesting properties such as energy HOMO–LUMO gaps and aggregation behavior in solution at room temperature. In depth calculations fully confirmed the aggregation tendency, highlighting the key role of the benzodithiophene as the donor component when in combination with the tetrafluorobenzene unit. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1601–1610     

Insight into the π‐hole···π‐electrons tetrel bonds between F2ZO (Z = C,Si, Ge) and unsaturated hydrocarbons

The intermolecular π‐hole···π‐electrons interactions between F₂ZO (Z = C, Si, Ge) molecules and unsaturated hydrocarbons including acetylene, ethylene, 1,3‐butadiene and benzene were constructed to reveal the differences of tetrel bonds forming by carbon and heavier tetrel atoms. The ab initio computation in association with topological analysis of electron density, natural bond orbital, and energy decomposition analysis demonstrate that the strength of Si···π and Ge···π tetrel bonds is much stronger than that of C···π tetrel bonds. The Si···π and Ge···π tetrel bonds exhibit covalent or partially covalent interaction nature, while the weak C···π tetrel bonds display the hallmarks of noncovalent interaction, the electrostatic interaction is the primary influencing factor. The Si···π and Ge···π interactions are determined by both the σ‐ and π‐electron densities, while the C···π interactions are dominated mainly by the π‐electron densities. The π‐hole···π‐electrons tetrel bonds are dominated by electrostatic interaction, and polarization has a comparable contribution in the Si···π and Ge···π tetrel bonds.     

New benzodithiophene‐ and benzooxadiazole/benzothiadiazole‐based donor–acceptor π‐conjugated polymers for organic photovoltaics

A new set of push‐pull type 2D‐conjugated polymers (P1–P4) were designed and synthesized where A1, A2 (oxygen analogues) and A3, A4 (sulfur analogues) are electron deficient units used as co‐monomers. On introduction of new repeating units into the polymer backbone, significant changes were observed in optoelectronic properties. Furthermore, the heteroatom exchange in new repeating units has also brought notable changes in photophysical properties, in particular P1 and P2 (oxygen analogues) showed bathochromic shift in UV‐vis absorption spectra and deeper HOMO energy levels than P3, P4 (sulfur analogues). Interestingly P1, P3 absorption spectra shows a vibronic shoulder (659, 652 nm) peak in lower energy region, and this might originated from non‐covalent interactions between the electron rich and electron deficient units. In addition, the systematic investigation of these polymers with additive and solvent treatment, yielded in enhanced power conversion efficiency of 4.29% for P3‐based devices in bulk heterojunction organic solar cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2668–2679     

Synthesis and electrochromic properties of triphenylamine containing copolymers: Effect of π‐bridge on electrochemical properties

In this study, a series of benzotriazole (BTz) and triphenylamine (TPA)‐based random copolymers; poly4‐(5‐(2‐dodecyl‐7‐methyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)thiophen‐2‐yl)‐N‐(4‐(5‐methylthiophen‐2‐yl)phenyl)‐N‐phenylaniline ( P1 ), poly4′‐(2‐dodecyl‐7‐methyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)‐N‐(4′‐methyl‐[1,1′‐biphenyl]‐4‐yl)‐N‐phenyl‐[1,1′‐biphenyl]‐4‐amine ( P2 ), and poly4‐(5′‐(2‐dodecyl‐7‐(5‐methylthiophen‐2‐yl)?2H‐benzo[d][1,2,3]triazol‐4‐yl)‐[2,2′‐bithiophen]‐5‐yl)‐N‐(4‐(5‐methylthiophen‐2‐yl)phenyl)‐N‐phenylaniline ( P3 ) were synthesized to investigate the effect of TPA unit and π‐bridges on electrochemical and spectroelectrochemical properties of corresponding polymers. The synthesis was carried out via Stille coupling for P1 , P3 , and Suzuki coupling for P2 . Electrochemical and spectral results showed that P1 has an ambipolar character, in other words it is both p‐type and n‐type dopable, whereas P2 and P3 have only p‐doping property. Effect of different π‐bridges and TPA unit on the HOMO and LUMO energy levels, switching time, and optical contrast were discussed. All polymers are promising materials for electrochromic devices. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 537–544