Polygonal current models for polycyclic aromatic hydrocarbons and graphene sheets of various shapes

Assuming that graphene is an “infinite alternant” polycyclic aromatic hydrocarbon resulting from tessellation of a surface by only six‐membered carbon rings, planar fragments of various size and shape (hexagon, triangle, rectangle, and rhombus) have been considered to investigate their response to a magnetic field applied perpendicularly. Allowing for simple polygonal current models, the diatropicity of a series of polycyclic textures has been reliably determined by comparing quantitative indicators, the π‐electron contribution to I^B, the magnetic field‐induced current susceptibility of the peripheral circuit, to and to , respectively the out‐of‐plane components of the magnetizability tensor and of the magnetic shielding tensor at the center of mass. Extended numerical tests and the analysis based on the polygonal model demonstrate that (i) and yield inadequate and sometimes erroneous measures of diatropicity, as they are heavily flawed by spurious geometrical factors, (ii) I^B values computed by simple polygonal models are valid quantitative indicators of aromaticity on the magnetic criterion, preferable to others presently available, whenever current susceptibility cannot be calculated ab initio as a flux integral, (iii) the hexagonal shape is the most effective to maximize the strength of π‐electron currents over the molecular perimeter, (iv) the edge current strength of triangular and rhombic graphene fragments is usually much smaller than that of hexagonal ones, (v) doping by boron and nitrogen nuclei can regulate and even inhibit peripheral ring currents, (vi) only for very large rectangular fragments can substantial current strengths be expected. © 2017 Wiley Periodicals, Inc.     

石墨烯层层键合固相微萃取纤维的制备及对多环芳烃的检测

通过3-巯基丙基三甲氧基硅烷处理银层包裹的不锈钢纤维,得到Si-OH功能化的纤维,氧化石墨烯被层层键合到Si-OH功能化的纤维上,还原氧化石墨烯得到石墨烯层层键合的固相微萃取纤维。该方法制备的新型石墨烯层层键合的固相微萃取纤维具有制备简单,机械性能强,萃取涂层牢固,萃取能力强等优势。建立具有较宽线性范围(5~200μg/L)、较低检测限(0.007~0.09μg/L)的固相微萃取-气相色谱分析方法,用该方法测定河水和雨水中多环芳烃的含量。所制备的新型纤维重现性好、稳定性高、萃取能力强,可实现对多环芳烃的痕量检测。     

A hierarchical porous composite magnetic sorbent of reduced graphene oxide embedded in polyvinyl alcohol cryogel for solvent-assisted-solid phase extraction of polycyclic aromatic hydrocarbons

A hierarchical porouscomposite magnetic sorbent was fabricated and applied to the dispersive solvent-assisted solid-phase extraction of five polycyclic aromatic hydrocarbons. A sorbent was first prepared by incorporating graphene oxide, calcium carbonate, and magnetite nanoparticles into a polyvinyl alcohol cryogel. The graphene oxide was converted to reduced graphene oxide using ascorbic acid and a hierarchical porous structure was produced by reacting hydrochloric acid with incorporated calcium carbonate to generate carbon dioxide bubbles which created a second network. Before extracting the target analytes, the extraction solvent was introduced into the hierarchical pore network of the sorbent. The extraction was based on the partition between the analytes and introduced extraction solvent and the adsorption of analytes on reduced graphene oxide.The extraction efficiency was enhanced through π-π and hydrophobic interactions between polycyclic aromatic hydrocarbons and reduced graphene oxide and extraction solvent. The extracted polycyclic aromatic hydrocarbons were determined by using high-performance liquid chromatography coupled with a fluorescence detector. The developed method was applied to extract polycyclic aromatic hydrocarbons in disposable diaper, coffee, and tea samples and recoveries from 84.5 to 99.4% were achieved with relative standard deviations below 7%. The developed sorbent exhibited good reproducibility and could be reused for 10 cycles.The developed sorbent exhibited good reproducibility and could be reused for 10 cycles.The developed sorbent exhibited good reproducibility and could be reused for 10 cycles.     

Oxidation of polycyclic aromatic hydrocarbons catalyzed by soybean peroxidase

Soybean peroxidase (SBP) catalyzes the oxidation of a variety of polycyclic aromatic hydrocarbons (PAHs) in the presence of water-miscible organic cosolvents, including acetonitrile, tetrahydrofuran, and dimethylformamide (DMF). Oxidation was optimal at pH 2.0–2.5, with substantially lower reactivity at pH 1.5 as well as at pH > 3.0. Despite the low pH activity optimum, SBP had an observed half-life of 120 h at pH 2.5. Conversions of greater than 90% were observed with anthracene and 9-methylanthracene in the presence of 50% (v/v) DMF. Anthracene oxidation yielded exclusively anthraquinone, thereby demonstrating that SBP catalyzes a formal six-electron oxidation of the unactivated aromatic substrate to the quinone. A mechanism is proposed to account for this reaction that includes the initial one-electron oxidation of the PAH followed by addition of water to the oxidized PAH. 9-Methylanthracene was more reactive than anthracene, and its enzymatic oxidation yielded two products: anthraquinone and 9-methanol-9,10-dihydroanthracene. The former product indicates that loss of the methyl group occurs during enzymatic oxidation. These results suggest that SBP could be useful in the conversion of PAHs into more environmentally benign materials.     

Differential scanning calorimetry to measure the purity of polycyclic aromatic hydrocarbons

The application of differential scanning calorimetry (DSC) for purity determination is well documented in literature and is used amongst others in the analysis of pure organic crystalline compounds. The aim of this work is to examine whether the DSC method for purity determination consistently produces values for the purity of polycyclic aromatic hydrocarbons (PAHs) which are sufficiently accurate as required for the certification of reference materials. For this purpose, 34 different existing PAH certified reference materials were tested. The DSC results are shown to be consistent with the results obtained by other methods assessing the organic impurities content in PAHs, like gas chromatography (GC), high performance liquid chromatography (HPLC) and mass spectrometry. Significant differences between the measured values and the certified purity values were observed only in a limited number of cases.     

Reinforced microextraction of polycyclic aromatic hydrocarbons from polluted soil samples using an in‐needle coated fiber with polypyrrole/graphene oxide nanocomposite

The surface of a stainless‐steel wire was platinized using electrophoretic deposition method to create a high‐surface‐area with porous and cohesive substrate. The platinized fiber was coated by the polypyrrole/graphene oxide nanocomposite by electropolymerization and accommodated into a stainless‐steel needle to fabricate an in‐needle coated fiber. The developed setup was coupled to gas chromatography with flame ionization detection and applied to extract and determine polycyclic aromatic hydrocarbons (naphthalene, fluorene, phenanthrene, fluoranthene, and pyrene) in complicated solid matrices, along with reinforcement of the extraction by cooling the sorbent, using liquid carbon dioxide. To obtain the best extraction efficiency, the important experimental variables including extraction temperature and time, temperature of cooled sorbent, sampling flow rate, and desorption condition were studied. Under the optimal condition, limits of detection for five studied analytes were in the range of 0.2–0.8 pg/g. Linear dynamic ranges for the calibration curves were found to be in the range of 0.001–1000 ng/g. Relative standard deviations obtained for six replicated analyses of 1 ng/g of analytes were 4.9–13.5%. The reinforced in‐needle coated fiber method was successfully applied for the analysis of polycyclic aromatic hydrocarbons in contaminated soil samples.     

Effects of spin contamination on estimating bond dissociation energies of polycyclic aromatic hydrocarbons

The objective of this work is to investigate the impact of spin contamination on the prediction of the enthalpies of formation of Polycyclic Aromatic Hydrocarbon (PAH) radicals and of the bond dissociation energies of their precursor molecule. These PAH radicals play a major role in the mass growth of soot precursors leading ultimately to the first soot particles. In this work, we highlights the errors due to spin contamination by comparing spin‐unrestricted open‐shell calculations (UHF, UMP2, and Quadratic CI singles and doubles [QCISD(T)]) with spin‐restricted open‐shell calculations (ROHF, ROMP2, and ROCCSD(T)). The results suggest that one should be very careful using any of the spin‐unrestricted methods (even QCISD (T)) unless the values are extremely close to the theoretical value. Following these observations, we propose a new set of best‐estimates for the enthalpies of formation of these critical PAH radicals using spin‐restricted open‐shell ROMP2 and RCCSD(T) calculations. © 2015 Wiley Periodicals, Inc.     

Aromaticity of giant polycyclic aromatic hydrocarbons with hollow sites: super ring currents in super-rings

We present a systematic theoretical study based on semi-empirical, Hartree-Fock (HF), and density functional theory (DFT) models of a series of polycyclic aromatic hydrocarbons (PAHs) that exhibit hollow sites. In this study we focus particularly on the magnetic criteria of aromaticity, namely (1)H NMR and nucleus-independent chemical shifts (NICS), and on their relationships with other electronic properties. The computed shifts and NICS indices indicate that an external magnetic field induces exceptionally strong ring currents in even-layered PAH doughnuts, in particular in the layer directly adjacent to the central hole of double-layered compounds. These exceptionally strong ring currents also correlate with particularly small HOMO-LUMO gaps and electronic excitation energies and to abnormally high polarizabilities, indicating in turn that these compounds have a more pronounced metallic character. Comparison is made with further depictions of aromaticity in these systems and in [18]-[66]annulene rings by employing topological, structural, and energetic criteria.     

Determination of trace hydroxyl polycyclic aromatic hydrocarbons in urine using graphene oxide incorporated monolith solid‐phase extraction coupled with LC‐MS/MS

The biomonitoring of hydroxy polycyclic aromatic hydrocarbons in urine, as a direct way to access multiple exposures to polycyclic aromatic hydrocarbons, has raised great concerns due to their increasing hazardous health effects on humans. Solid‐phase extraction is an effective and useful technique to preconcentrate trace analytes from biological samples. Here, we report a novel solid‐phase extraction method using a graphene oxide incorporated monolithic syringe for the determination of six hydroxy polycyclic aromatic hydrocarbons in urine coupled with liquid chromatography‐tandem mass spectrometry. The effect of graphene oxide amount, washing solvent, eluting solvent, and its volume on the extraction performance were investigated. The fabricated monoliths gave higher adsorption efficiency and capacity than the neat polymer monolith and commercial C₁₈ sorbent. Under the optimum conditions, the developed method provided the detection limits (S/N = 3) of 0.02–0.1 ng/mL and the linear ranges of 0.1–1500 ng/mL for six analytes in urine sample. The recoveries at three spiked levels ranged from 77.5 to 97.1%. Besides, the intra column‐to‐column (n = 3) and inter batch‐to‐batch (n = 3) precisions were ≤ 9.8%. The developed method was successfully applied for the determination of hydroxy polycyclic aromatic hydrocarbons in urine samples of coke oven workers.     

Theoretical study concerning the reactivity of imine derivatives of polycyclic aromatic hydrocarbons

The opening reaction of N-protonated polycyclic aromatic hydrocarbon imines has been computed by means of ab initio, density functional, and semiempirical methods of calculation. Imines are predicted to be more stable than the corresponding O-protonated derivatives, epoxides and diol epoxides. On the other hand, the activated N-methanesulfonylbenzene imine presented more favorable DeltaE( not equal ) and DeltaE(r) for ring opening due to the effect of hydrogen-bond interactions. Anti and syn trans-diol benzene imines did not show a different behavior from the unsubstituted imine. According to these calculations, bay-region, fjord-region, and bay-region methyl-substituted compounds opened more easily among the imine derivatives, following the same reactivity pattern as the oxygen analogs. The exothermicity of the opening process correlated with the charge delocalization in the resulting carbocation.     

气相色谱-质谱法测定热塑性弹性体中的多环芳烃

建立了一种简单、准确的测定热塑性弹性体中16种多环芳烃(PAHs)的气相色谱-质谱(GC-MS)方法。考察了样品制备、萃取溶剂、萃取方法、时间以及温度对厂家制备的阳性热塑性弹性体样品中PAHs提取效率的影响,确定了萃取条件和方法。样品经甲苯超声萃取、浓缩后用环己烷溶解、二甲亚砜液液萃取净化后采用GC-MS进行分析,内标法定量。通过对不同材质阳性热塑性弹性体样品的加标回收、精密度试验等对建立的方法进行评价,16种PAHs的平均回收率为70%～117%,精密度为0.2%～10.8%。该方法适合于热塑性弹性体中PAHs的测定。     

两种金属有机配合物的制备及其对多环芳烃吸附性能的考察

用水热合成和常温合成法分别制备了以锌离子和铜离子为主体、1,2,4-苯三甲酸和4,4’-联吡啶为配体的两种金属有机配合物材料,并考察了其对多环芳烃（PAHs）的吸附性能。用粉末衍射仪（XRD）、热重分析仪（TGA）、傅里叶红外光谱仪（FT-IR）、扫描电镜仪（SEM）和比表面积测试仪（BET）表征了材料的组成、形貌、热稳定性和吸附等性能。结果表明,两种配合物具有较好的热稳定性和吸附能力;PAHs在两种配合物材料上的吸附动力学均符合假二级动力学模型,吸附行为均符合Langmuir方程,且两种配合物对PAHs吸附量随着配合物用量的增加而增大。此外,两种配合物材料对10种PAHs均能有效富集吸附,且吸附具有选择性。通过对该金属有机配合物材料进一步优化有望作为色谱固定相使用。     

Ultrasound-assisted solvent extraction of total polycyclic aromatic hydrocarbons from mussels followed by spectrofluorimetric determination

An ultrasound-assisted solvent extraction procedure has been optimised to speed up total polycyclic aromatic hydrocarbons (T-PAHs) extraction from mussel soft tissue. The T-PAHs releases have been evaluated by spectrofluorimetry (excitation and fluorescence emission wavelengths of 300 and 382 nm, respectively, and using chrysene as calibrant). Variables such as sonication time, ultrasound frequency, n-hexane volume, dichloromethane volume, number of repeated extractions with n-hexane and number of repeated extraction with dichloromethane were simultaneously studied by applying a Plackett-Burman design (PBD) approach. Results showed that ultrasound frequency and n-hexane and dichloromethane volumes were statistically significant variables (confidence interval of 95%). These last two variables were finally optimised by using central composite designs (CCD), yielding optimum n-hexane and dichloromethane volumes of 2.5 and 6.5 ml, respectively. The lowest T-PAHs releasing at high ultrasound frequency (35 kHz) led to choice the lowest ultrasound frequency (17 kHz) to perform the extraction. Variables such as sonication time and number of repeated extraction with n-hexane or dichloromethane were statistically non-significant and they were fixed at 10 min and the extraction with n-hexane and dichloromethane were performed once. The limit of detection was 0.021 μg g⁻¹ (referred to dried mass), the repeatability of the overall method was 4.7% (n = 9) and the analytical recoveries were between 98 and 105%. The proposed method was finally applied to 16 mussel samples (Mytilus galloprovincialis) from Ría de Arousa estuary (Galicia, northwest Spain).     

Synthesis and structures of helical polycyclic aromatic hydrocarbons bearing aryl substituents at the most sterically hindered positions

A three-step synthetic sequence starting from condensation between a benzannulated enediyne and an aryl tert-butyl ketone was established to provide easy access to angularly fused polycyclic aromatic hydrocarbons bearing one or two aryl substituents at the most sterically hindered positions to cause helical twists. The dynamic behaviors involving the helix inversion and the restricted rotation of the aryl substituents were investigated by temperature-dependent NMR studies. The X-ray structure of an indeno-fused 1-phenylpentahelicene derivative showed severe distortion of the [5]helicene system from planarity.     

Determination of trace amounts of polycyclic aromatic hydrocarbons in soil

A method for monitoring the contamination of soil with polycyclic aromatic hydrocarbons (PAHs) is introduced. Drying at elevated temperature is omitted to avoid losses of the more volatile constituents (primarily naphthalene). The soil sample, including its natural water content, is extracted with 2-methoxyethanol and cleaned up using a disposable C₈ cartridge and the PAHs are eluted with pentane, concentrated and measured by capillary gas chromatography with flame ionization detection. Determination limits between 15 and 35μg kg^?1 are obtained and the recovery is 80–90% measured at the 125 μg kg^?1 spike level, except for naphthalene (66%). Special attention is given to the design of the spiking technique, which simulates natural incorporation as far as possible, takes account of evaporation losses and therefore allows “real” recovery rates to be determined.     

超声提取-气相色谱/质谱法测定皮革及纺织品中18种多环芳烃

采用超声波萃取技术对样品进行提取,气相色谱联用质谱(GC-MS)选择离子监测(SIM)模式采集数据,建立了皮革及纺织品中18种多环芳烃(PAHs)的分析方法.对色谱、质谱分析条件以及样品前处理条件进行研究与优化.在最优条件下,18种PAHs浓度在一定范围内与其峰面积呈现良好的线性关系,相关系数(R2)为0.9991～0...     

Quantification of 13 priority polycyclic aromatic hydrocarbons in human urine by headspace solid-phase microextraction gas chromatography-isotope dilution mass spectrometry

Polycyclic aromatic hydrocarbons (PAHs) are common environmental pollutants in both living and working environments. The aim of this study was the development of a headspace solid-phase microextraction gas chromatography-isotope dilution mass spectrometry (HS-SPME/GC-IDMS) method for the simultaneous quantification of 13 PAHs in urine samples. Different parameters affecting PAHs extraction by HS-SPME were considered and optimized: type/thickness of fiber coatings, extraction temperature/time, desorption temperature/time, ionic strength and sample agitation. The stability of spiked PAHs solutions and of real urine samples stored up to 90 days in containers of different materials was evaluated. In the optimized method, analytes were absorbed for 60 min at 80 °C in the sample headspace with a 100 μm polydimethylsiloxane fiber. The method is very specific, with linear range from the limit of quantification to 8.67 × 10³ ng L⁻¹, a within-run precision of <20% and a between-run precision of <20% for 2-, 3- and 4-ring compounds and of <30% for 5-ring compounds, trueness within 20% of the spiked concentration, and limit of quantification in the 2.28-2.28 × 10¹ ng L⁻¹ range. An application of the proposed method using 15 urine samples from subjects exposed to PAHs at different environmental levels is shown.     

HPLC analysis of the large polycyclic aromatic hydrocarbons in a diesel particulate

Summary High performace liquid chromatography (HPLC) was used to separate the large polycyclic aromatic hydrocarbons in a diesel particulate extract. Identification of individual peaks was made using a photodiode array UV/visible detector to collect their absorbance spectra. Comparisons between standard compounds and the peaks were made using both retention times and spectra. Compounds of up to 10 rings were identified.