Optimization of the separation of phenolic compounds by micellar electrokinetic capillary chromatography

A group of phenolic compounds including phenolic aldehydes, acids and flavonoids are separated by micellar electrokinetic chromatography (MECC). The influence of buffer (concentration and pH), concentration of sodium dodecylsulphate (SDS) and applied voltage were studied. To increase the selectivity of the separation and the resolution of the solutes organic solvents are added to the separation buffer, the best results were obtained when methanol was used at lower percentages. An optimized buffer (150 mM boric acid (pH 8.5)-50 mM SDS-5% methanol) provides the optimum separation with regard to resolution and migration time. This method was applied to the determination of these compounds in wine samples with good results.     

Determination of Saikosaponins in Bupleuri Radix by Micellar Electrokinetic Chromatography with Experimental Design

The important pharmacological components of Bupleuri radix include saikosaponins a–d. A multivariable approach with experimental design was employed in this study to determine four saikosaponins in different species of Bupleuri radix by cyclodextrin-modified micellar electrokinetic chromatography. Compared to traditional multiple-parameter investigations, the current experimental design can shorten the time necessary for method development, and the multivariable approach can be used to evaluate the separation capability of the method and to explore the interactions of the different parameters. The significant influences of two experimental variables, including the concentration of γ-cyclodextrin and the percentage of methanol, on the responses were investigated using chromatographic resolution statistics. The optimized conditions were as follows: 25?mM of borate (pH 9.18) containing 50?mM of sodium dodecyl sulfate, 5?mM of γ-cyclodextrin, and 15% methanol (v/v) as running buffer. After the separation conditions were optimized and good resolution was acquired, solid phase extraction was performed to reduce the interference of crude extracts of Bupleurum kaoi and Bupleurum chinense DC. The simple and rapid analytical method was successfully applied, allowing for the determination of four saikosaponins and the identification of species of Bupleuri radix.     

Determination of triazine compounds in ground water samples by micellar electrokinetic capillary chromatography

In this work, a capillary electrophoresis (CE) method for the determination of a group of eleven triazine compounds by micellar electrokinetic capillary chromatography (MEKC) with diode array detection was developed. The eleven herbicides studied were: desethylatrazin-2-hydroxy (DEA), simazine, prometon, atrazine, simetryn, ametryn, propazine, prometryn, trietazine, terbutylazine, and terbutryn The separation of these compounds was optimised as a function of buffer concentration and pH, concentration of sodium dodecyl sulphate (SDS) and voltage applied. To increase the selectivity of the separation and the resolution of the solutes, different organic solvents were tested as buffer additives, obtaining the best results when 1-propanol was used. The optimised buffer (24 mM of sodium borate, 18 mM of disodium hydrogen phosphate, 25 mM of SDS, pH 9.5, and 5% of 1-propanol) provides the best separation in terms of resolution and migration time. This method allowed the determination of these compounds at concentrations of 0.05 μg l⁻¹ in ground water samples pretreated using solid-phase extraction (SPE).     

Optimization of a stability-indicating HPLC method for the simultaneous determination of rifampicin, isoniazid, and pyrazinamide in a fixed-dose combination using artificial neural networks

The aim of this study is to develop and optimize a simple and reliable high-performance liquid chromatography (HPLC) method for the simultaneous determination of rifampicin (RIF), isoniazid (INH), and pyrazinamide (PZA) in a fixed-dose combination. The method is developed and optimized using an artificial neural network (ANN) for data modeling. Retention times under different experimental conditions (solvent, buffer type, and pH) and using four different column types (referred to as the input and testing data) are used to train, validate, and test the ANN model. The developed model is then used to maximize HPLC performance by optimizing separation. The sensitivity of the separation (retention time) to the changes in column type, concentration, and type of solvent and buffer in the mobile phase are investigated. Acetonitrile (ACN) as a solvent and tetrabutylammonium hydroxide (tBAH), used to adjust pH, have the greatest influence on the chromatographic separation of PZA and INH and are used for the final optimization. The best separation and reasonably short retention times are produced on the micro-bondapak C18, 4.6 x 250-mm column, 10 microm/125 A using ACN-tBAH (42.5:57.5, v/v) (0.0002M) as the mobile phase, and optimized at a final pH of 3.10.     

Determination of nonylphenol and nonylphenol ethoxylates in wastewater using MEKC

Nonylphenol ethoxylates (NPEO_x) are surfactants which are used worldwide and can be transformed in the environment by microorganisms to form nonylphenol (NP). Analysis of these compounds was carried out with micellar electrokinetic capillary chromatography (MEKC). Different parameters such as background electrolyte (BGE) solution, pH, type of surfactant, and sample stacking were optimized. The use of CHES (20 mM, pH 9.1) in combination with 50 mM sodium cholate as a surfactant as BGE solution, together with sample stacking using 50 mM NaCl in the sample and an injection time of 20 s, provided the best separation of the compounds studied. The method was applied to the determination of target analytes in two types of sludge water coming from two steps of a wastewater treatment plant. Liquid–liquid extraction was carried out using toluene as solvent, resulting in recoveries around 100% for all studied analytes. The presence of NPEO_x was observed in the first step of the sludge water treatment, based on migration time and UV spectra. Identification was confirmed using tandem MS. LOQs of the studied compounds were in the range of 12.7 to 30.8 ng/mL, which is satisfactory for the analysis of real wastewater samples.     

Simultaneous Separation and Determination of Benzoic Acid Compounds in the Plant Medicine by High Performance Capillary Electrophoresis

A simple and inexpensive high performance capillary electrophoresis (HPCE) was applied to separate five benzoic acid compounds simultaneously. The investigation was carried out by micellar electrokinetic capillary chromatography (MECC). To avoid a time‐consuming and tedious procedure, orthogonal experimental design OA₉ (3⁴) for separation experiments was applied to find the optimal conditions in terms of the resolution and analytical time. The best conditions for separation were obtained using a 20 mM borax and 30 mM sodium dodecyl sulfate (SDS) buffer (pH 9.8) containing 2 mM β‐CD and 4% methanol (v/v). Online UV detection was performed at 250 nm. A voltage of 16 kV was applied and the temperature was controlled at 25 °C. Injection was performed for 5 s. The method was validated for the quantification of benzoic acid, salicylic acid and ortho‐aminobenzoic acid in Radix Isatidis, a traditional plant medicine with removal of endotoxin. The separation and determination were satisfactory and quick.     

Optimization of the separation of flavonoids by micellar electrokinetic capillary chromatography: Effect of organic solvents

Summary A group of flavonoids of special interest to wine quality were separated by micellar electrokinetic chromatography (MEKC) with diode array detection. Their separation was optimized as a function of the buffer concentration and pH, the concentration of sodium dodecyl sulfate (SDS) and the applied voltage. Selectivity and resolution of the solutes were increased by adding organic solvents to the separation buffer, the best results being obtained at lower concentrations. An optimized buffer with 5% methanol provided optimum separation with regard to efficiency, resolution and migration time. The optimized method was applied to the determination of these compounds in wine samples.     

Optimization of a solid-phase microextraction procedure for the determination of herbicides by micellar electrokinetic chromatography

The use of a different optimization procedure that involves Experimental Design (ED) and Artificial Neural Networks (ANN) for the off-line coupling solid-phase microextraction-micellar electokinetic chomatography (SPME-MEKC) is presented. This combination of ED and ANN, mathematical tools not previously used in SPME-MEKC optimization, allowed us to obtain good extraction efficiencies in the SPME procedure for the determination of a group of eleven triazine herbicides in groundwater samples. Both extraction and desorption steps were carried out by solution stirring at 900 rpm. Optimal conditions for the off-line SPME procedure were: extraction with a poly(dimethylsiloxane)/divinylbenzene SPME fiber for 120 min, 10% (w/v) NaCl, desorption time 40 min, and 70% (v/v) of methanol/buffer as desorption mixture. Detection limits lay between 0.80 microg L(-1) and 4.89 microg L(-1). Finally, the optimized method was applied to the determination of these compounds in spiked and non-spiked groundwater samples using a previously optimized MEKC separation.     

Development of an ultraperformance liquid chromatography method for improved determination of additives in polymeric materials

An analytical method for the simultaneous separation and quantitation of ten colorants and six antioxidants used as polymer additives has been developed by transferring chromatographic conditions from two independent HPLC methods to a single ultraperformance liquid chromatography system. An experimental design was carried out to achieve the best elution gradient for separation of all the studied compounds with the best possible peak resolution and in the shortest possible analysis time. The new method gives good values for the analytical quality parameters evaluated.     

Evaluation of chromatographic columns packed with semi‐ and fully porous particles for benzimidazoles separation

The behavior of 15 benzimidazoles, including their main metabolites, using several C₁₈ columns with standard or narrow‐bore diameters and different particle size and type were evaluated. These commercial columns were selected because their differences could affect separation of benzimidazoles, and so they can be used as alternative columns. A simple screening method for the analysis of benzimidazole residues and their main metabolites was developed. First, the separation of benzimidazoles was optimized using a Kinetex C₁₈ column; later, analytical performances of other columns using the above optimized conditions were compared and then individually re‐optimized. Critical pairs resolution, analysis run time, column type and characteristics, and selectivity were considered for chromatographic columns comparison. Kinetex XB was selected because it provides the shortest analysis time and the best resolution of critical pairs. Using this column, the separation conditions were re‐optimized using a factorial design. Separations obtained with the different columns tested can be applied to the analysis of specific benzimidazoles residues or other applications.     

Microemulsion electrokinetic chromatography for separation and analysis of curcuminoids in turmeric samples

Microemulsion EKC (MEEKC) was developed for quantitative analysis of curcuminoids, such as curcumin (C), demethoxycurcumin (D), and bis-demethoxycurcumin (B). MEEKC separation of curcuminoids was optimized, and a change in resolution was explained using a modified equation for resolution in MEEKC without electroosmosis. The suitable MEEKC conditions for separation of curcuminoids were obtained to be the microemulsion buffer containing 50 mM phosphate buffer at pH 2.5, 1.1% v/v n-octane as oil droplets, 180 mM SDS as surfactant, 890 mM 1-butanol as cosurfactant, and 25% v/v 2-propanol as organic cosolvent; applied voltage of -15 kV; and separation temperature 25 degrees C. Achieved baseline resolution of C:D and D:B was obtained with R(s) -2.4 and analysis time within 18 min. In addition, high accuracy and precision of the method were obtained. This MEEKC method was used for quantitative determination of individual curcuminoids in medicinal turmeric capsules and powdered turmeric used as coloring additive in food, with simple sample preparation such as solvent extraction, dilution, and filtration, and without cleaning up by SPE.     

Separation of phthalates by cyclodextrin modified micellar electrokinetic chromatography: Quantitation in perfumes

A new CE method has been developed for the simultaneous separation of a group of parent phthalates. Due to the neutral character of these compounds, the addition of several bile salts as surfactants (sodium cholate (SC), sodium deoxycholate (SDC), sodium taurodeoxycholate (STDC), sodium taurocholate (STC)) to the separation buffer was explored showing the high potential of SDC as pseudostationary phase. However, the resolution of all the phthalates was not achieved when employing only this bile salt as additive, being necessary the addition of neutral cyclodextrins (CD) and organic modifiers to the separation media. The optimized cyclodextrin modified micellar electrokinetic chromatography (CD-MEKC) method consisted of the employ of a background electrolyte (BGE) containing 25 mM β-CD-100 mM SDC in a 100 mM borate buffer (pH 8.5) with a 10% (v/v) of acetonitrile, employing a voltage of 30 kV and a temperature of 25 °C. This separation medium enabled the total resolution of eight compounds and the partial resolution of two of the analytes, di-n-octyl phthalate (DNOP) and diethyl hexyl phthalate (DEHP) (Rs ~ 0.8), in only 12 min. The analytical characteristics of the developed method were studied showing their suitability for the determination of these compounds in commercial perfumes. In all the analyzed perfumes the most common phthalate was diethyl phthalate (DEP) that appeared in ten of the fifteen analyzed products. Also dimethyl phthalate (DMP), diallyl phthalate (DAP), dicyclohexyl phthalate (DCP), and di-n-pentyl phthalate (DNPP) were found in some of the analyzed samples.     

Mixture design in the optimization of a microemulsion system for the electrokinetic chromatographic determination of ketorolac and its impurities: method development and validation

Microemulsion EKC (MEEKC) was used for the determination of ketorolac and its three impurities. The microemulsion system was optimized, for the first time in the literature, using a multivariate strategy involving a mixture design. A 13-run experimental plan covering an experimental domain defined by the components aqueous phase (10 mM borate buffer pH 9.2), oil phase (n-heptane) and surfactant/cosurfactant (SDS/n-butanol) was carried out. Good results were obtained with all microemulsions tested considering as responses analysis time and resolution, and according to the desirability function the best microemulsion system was constituted by 90.0% 10 mM borate buffer, 2.0% n-heptane, 8.0% of SDS/n-butanol in 1:2 ratio. Finally, with the aim of reducing analysis time, a response surface study was carried out in the experimental domain defined by the process variables temperature and voltage and the best values were 17 degrees C and -17 kV, respectively. Applying the optimised conditions, a complete resolution among the analytes was obtained in about 3 min using the short-end injection method. The method was validated for both drug substances and drug product and was applied to the quality control of ketorolac in coated tablets. A comparison of MEEKC, MEKC and CEC for assaying ketorolac and its related substances has been made.     

A new capillary zone electrophoresis method for the analysis of Ginkgo biloba extracts and Ginkgo biloba pharmaceutical products

Ginkgo biloba, traditional Chinese medicine is now generally accepted. Separation and determination of active components in G. biloba is important for the product quality control. Therefore, the development of an effective and reliable separation method is important. In this work, a new capillary electrophoretic (CZE) method for separation of the G. biloba leaf extracts components was developed and optimized by the use of experimental design and artificial neural network (ANN). Under best separation conditions, in gamma-CD-modified buffer, the separation was reached within 10 min (36 mM borate BGE, pH 9.2, 1 mM gamma-CD), while the hydrodynamic mode for sample injection (2 s) and UV detection at 270 nm were applied. The method developed was validated and applied for analysis of various extracts and G. biloba products.     

Optimisation of high performance liquid chromatography separation of neuroprotective peptides. Fractional experimental designs combined with artificial neural networks

The study of experimental design conjunction with artificial neural networks for optimisation of isocratic ion-pair reverse phase HPLC separation of neuroprotective peptides is reported. Different types of experimental designs (full-factorial, fractional) were studied as suitable input and output data sources for ANN training and examined on mixtures of humanin derivatives. The independent input variables were: composition of mobile phase, including its pH, and column temperature. In case of a simple mixture of two peptides, the retention time of the most retentive component and resolution were used as the dependent variables (outputs). In case of a complex mixture with unknown number of components, number of peaks, sum of resolutions and retention time of ultimate peak were considered as output variables. Fractional factorial experimental design has been proved to produce sufficient input data for ANN approximation and thus further allowed decreasing the number of experiments necessary for optimisation. After the optimal separation conditions were found, fractions with peptides were collected and their analysis using off-line matrix assisted laser desorption/ionisation time of flight mass spectrometry (MALDI-TOF-MS) was performed.     

Application of Central Composite Design for the Determination of Exfoliating Agents in Cosmetics by Capillary Electrophoresis with Electroosmotic Flow Modulation

Multivariate analysis within central composite design is applied to simplify an optimization procedure and explore the interactions among experimental parameters in analytical chemistry. In this study, central composite design was used to identify the optimal capillary electrophoresis conditions with electroosmotic flow modulation to determine seven exfoliating agents in cosmetics. The influence of phosphate concentration, cetyltrimethylammonium bromide concentration, and methanol percentage on the response was evaluated by the use of the chromatographic exponential function to simultaneously investigate the resolution and separation under sixteen sets of capillary electrophoresis conditions. The optimized conditions were 150 mM phosphate solution (pH = 7) containing 0.5 mM cetyltrimethylammonium bromide, 3 mM γ-cyclodextrin, and 25% methanol as the running buffer. To shorten the analysis time, an electroosmotic flow modulating agent (cetyltrimethylammonium bromide) was added to the separation buffer. Calibration plots were linear (r ≧ 0.998) with high precision and accuracy in the homemade cosmetic matrix. The exfoliating agents in two commercial cosmetic products were determined using the optimized conditions, and the results correlated well with results obtained by high-performance liquid chromatography–mass spectrometry.     

Optimization for quantitative determination of four flavonoids in Epimedium by capillary zone electrophoresis coupled with diode array detection using central composite design

Herba Epimedii (family Berberidaceae), Ying-Yang-Huo in Chinese, is a famous Chinese herbal medicine. Flavonoids are thought to be the major active components in it. A capillary zone electrophoresis (CZE) separation were developed for simultaneous determination of four flavonoids including icariin, epimedin A, epimedin B and epimedin C in Epimedium. The effects of the experimental variables on CZE had been optimized by using central composite design (CCD). The best separation of four flavonoids could be obtained using 50 mM borate buffer (pH 10.0) containing 22% acetontrile as modifier, while separation voltage was 15 kV and temperature was at 25 degrees C. The method developed is accurate, simple and reproducible, which could be used for quality control of Epimedium and its medical preparations.     

Capillary electrophoresis-electrospray ionization-mass spectrometry method to determine the phenolic fraction of extra-virgin olive oil

We describe the first analytical method involving SPE and CZE coupled to ESI-IT MS (CZE-ESI-MS) used to identify and characterize phenolic compounds in olive oil samples. The SPE, CZE and ESI-MS parameters were optimized in order to maximize the number of phenolic compounds detected and the sensitivity of their determination. To this end we have devised a detailed method to find the best conditions for CE separation and the detection by MS of the phenolic compounds present in olive oil using a methanol-water extract of Picual extra-virgin olive oil (VOO). Electrophoretic separation was carried out using an aqueous CE buffer system consisting of 60 mM NH(4)OAc at pH 9.5 with 5% of 2-propanol, a sheath liquid containing 2-propanol/water 60:40 v/v and 0.1% v/v triethylamine. This method offers to the analyst the chance to study important phenolic compounds such as phenolic alcohols (tyrosol (TY), hydroxytyrosol (HYTY) and 2-(4-hydroxyphenyl)ethyl acetate), lignans ((+)-pinoresinol and (+)-1-acetoxypinoresinol), complex phenols (ligstroside aglycon (Lig Agl), oleuropein aglycon, their respective decarboxylated derivatives and several isomeric forms of these (dialdehydic form of oleuropein aglycon, dialdehydic form of ligstroside aglycon, dialdehydic form of decarboxymethyl elenolic acid linked to HYTY, dialdehydic form of decarboxymethyl elenolic acid linked to TY) and 10-hydroxy-oleuropein aglycon) and one other phenolic compound (elenolic acid) in extra-VOO by using a simple SPE before CE-ESI-MS analysis.     

Application of carboxymethyl-beta-cyclodextrin as a chiral selector in capillary electrophoresis for enantiomer separation of selected neurotransmitters

The aim of this work was to optimize conditions for capillary electrophoresis separation of different neurotransmitters (serotonin, phenylalanine, dopamine, adrenaline, ephedrine, propranolol and DOPA) in a single run, including separation of existing enantiomers. As chiral selectors added to the borate background, electrolyte unsubstituted alpha-, beta- and -gamma-cyclodextrins (CDs), methyl-, dimethyl-, and trimethyl-substituted beta-CDs, and hydroxypropyl-substituted alpha-, beta- and gamma-CDs were examined. Also carboxymethyl-beta-CD and succinyl-beta-CD were used for this purpose. In addition to the kind and concentration of chiral selector, some other experimental factors also have been optimized, such as concentration of borate buffer, content of methanol, pH of electrolyte, method of sample introduction into the capillary and washing procedure between consecutive runs. The best results were obtained using 20 mM carboxymethyl-beta-CD in borate buffer of pH 7.5 as running electrolyte and hydrostatic injection. The obtained sensitivity of response (peak height) varied from 0.4 for adrenalines to 2.3 mAU mM(-1) for propranolols. The concentration detection limits (S/N=3) were in the range from 0.04 mM for propranolols to 0.2 mM for adrenalines. The resolution obtained in optimized conditions in a single run was from 0.75 for adrenalins and 1.0 for propranolols up to 2.0 for ephedrines. The developed method was employed for determination of these analytes in brain tissue extracts.     

二维反相液相色谱制备五味子中的木脂素

应用自主研发的具有分离-富集模式的制备色谱工厂,建立了分离制备五味子木脂素有效部位及其单体化合物的方法。该方法首先以C₁₈（250 mm×4.6 mm,5 μm）为色谱柱,水和甲醇为流动相,分离度和保留时间为考察指标,采集4个不同梯度的色谱信息,通过XTool色谱专家系统软件模拟,确定五味子木脂素第一、二维色谱条件;然后采用线性放大的方法,以C₁₈（250 mm×30 mm,10 μm）为第一、二维分离柱,C₁₈（80 mm×30 mm,10 μm）为富集柱,水为富集稀释液,对五味子木脂素进行二维色谱分离纯化;最后第一维分离得到9个可重复组分,第二维分离得到20个高纯度化合物,其中有6个单体化合物。结果表明该法重现性良好,可以实现五味子木脂素的系统性分离,对五味子化学成分的研究具有重要意义。