Stacking patterns of thieno[3,2‐b]thiophenes functionalized by sequential palladium‐catalyzed Suzuki and Heck cross‐coupling reactions

The crystal structures of three 5‐alkenyl‐2‐arylthieno[3,2‐b]thiophenes, namely 3,6‐dibromo‐5‐(4‐tert‐butylstyryl)‐2‐(naphthalen‐1‐yl)thieno[3,2‐b]thiophene, C₂₈H₂₂Br₂S₂, (I), 3,6‐dibromo‐5‐(4‐methylstyryl)‐2‐(naphthalen‐1‐yl)thieno[3,2‐b]thiophene, C₂₅H₁₆Br₂S₂, (II), and 3,6‐dibromo‐2‐(4‐tert‐butylphenyl)‐5‐(4‐methylstyryl)thieno[3,2‐b]thiophene, C₂₅H₂₂Br₂S₂, (III), have been determined in order to evaluate the geometry of the molecules. The π‐conjugated system containing the thieno[3,2‐b]thiophene skeleton, the ethylene bridge and the phenyl rings is almost planar. The aromatic ring directly attached to the thieno[3,2‐b]thiophene moiety is not coplanar with the thieno[3,2‐b]thiophene moiety itself due to steric hindrance of the bromo substituent. The crystal packings are characterized by π–π stacking [only for (II)] and C—Br...π interactions. The long axes of the molecules in (I) are oriented in two directions; for the two other structures the long axis is oriented in one direction only.     

Novel 5-(4-alkoxyphenyl)thieno[3,2-b]thiophene-2-carboxylate esters: Highly efficient synthesis and mesogenic evaluation of a new class of materials exhibiting the smectic C phase

A series of alkyl 5-(4-alkoxyphenyl)thieno[3,2-b]thiophene-2-carboxylates were prepared via a direct, efficient Pd(0)-catalysed Suzuki–Miyaura coupling approach. A series of long-chain alkyl thieno[3,2-b]thiophene-2-carboxylate esters, synthesised from newly reported alkyl mercaptoacetates, were elaborated into the target compounds via regioselective (C-5) halogenation followed by cross-coupling with 4-alkoxyphenyltrifluoroborate salts. As expected, these target alkyl 5-(4-alkoxyphenyl)thieno[3,2-b]thiophene-2-carboxylate ester mesogens exhibited the orthogonal smectic A phase; notably, they are the first materials built on the thieno[3,2-b]thiophene motif to also exhibit the smectic C mesophase.     

Palladium-catalyzed amination and cyclization to heteroannellated indoles and carbazoles

New ortho-bromodiarylamines in the benzo[b]thiophene series were prepared by palladium-catalyzed amination, either in the benzene or in the thiophene ring. These were submitted to palladium-catalyzed cyclization, under different required conditions, to give several differently substituted thieno[3,2-c] or [2,3-b]carbazoles and indolo[3,2-b]benzo[b]thiophenes. This constitutes a novel synthetic route to both tetracyclic systems.     

One-pot Synthesis of 2,4-Diamino-substituted Thieno[3,2-d]pyrimidines

An efficient one‐pot synthetic approach to 2,4‐diamino‐substituted thieno[3,2‐d]pyrimidines from 2,4‐dichlorothieno[3,2‐d]pyrimidine was described.     

Palladium‐Catalyzed Domino CH/NH Functionalization: An Efficient Approach to Nitrogen‐Bridged Heteroacenes

Palladium‐catalyzed domino C?H/N?H functionalization for the synthesis of novel nitrogen‐bridged thienoacenes and 10H‐benzo[4,5]thieno[3,2‐b]indole derivatives from dihaloarene is reported. This domino sequence consists of initial C?H functionalization of the benzo[b]thiophene moiety, followed by Buchwald–Hartwig coupling. This transformation is also useful for the synthesis of highly π‐extended compounds.     

Synthesis and Transformations of 3-Ethoxycarbonyl-2-(N-R-thioureido)thiophenes

3-Ethoxycarbonyl-2-(N-R-thioureido)-4,5,6,7-tetrahydrobenzo[b]thiophenes were obtained by the reaction of 2-amino-3-ethoxycarbonyl-4,5,6,7-tetrahydrobenzo[b]thiophene with isothiocyanates and of 3-ethoxycarbonyl-2-isothiocyanato-4,5,6,7-tetrahydrobenzo[b]thiophene with primary and secondary amines. The cyclization paths of the products leading to derivatives of thieno[2,3-d]pyrimidine and thieno[2,3-d]-1,3-thiazine were studied. The corresponding S-substituted derivatives were obtained by the alkylation of 3-R-2-thioxo-3,4,5,6,7,8-hexahydrobenzo[b]thieno[2,3-d]pyrimidin-4-ones.     

Novel ferroelectric liquid crystals based on fused thieno[3,2‐b]furan and thieno[3,2‐b]thiophene cores

Several series of new benzofused thieno[3,2‐b]furan‐ and thieno[3,2‐b]thiophene‐based derivatives have been synthesized and their mesomorphic properties investigated. All the studied compounds exhibit a SmC* phase with very wide temperature interval. Additionally, some types of the compounds show the cholesteric, SmA or blue phase. In the ferroelectric SmC* phase we evaluated physical properties of relevance for possible applications.     

Synthesis and identification of new thieno[3,2-b] benzothiophenes

The reaction of 2-lithiobenzo[b]thiophenes with ketones produced 2-hydroxyalkylbenzo[b]thiophenes which were cyclized in thionyl chloride to give novel thieno[3,2-b][1]benzothiophenes. Oxidation with peroxyacetic acid gave the S,S-dioxides whose regiochemistry was identified from ¹H nmr model studies using substituted benzo[b]thiophenes and their corresponding-1,1-dioxides [1].     

Convenient synthesis and anticancer evaluation of novel pyrazolyl-thiophene,thieno[3,2-b]pyridine,pyrazolo[3,4-d]thieno[3,2-b]pyridine and pyrano[2,3-d]thieno[3,2-b]pyridine derivatives

The newly synthesized 3-(3-amino-5-(phenylamino)-4-(phenylcarbamoyl)thiophen-2-yl)-3-oxopropanoate was utilized as a precursor for the synthesis of pyrazolyl-thiophene derivative, which undergoes cyclization upon treatment with benzaldehyde derivatives to provide pyrazolo[3,4-d]thieno[3,2-b]pyridines. Basic treatment of pyrazolyl-thiophene derivative with phenyl isothiocyanate followed by subsequent addition of chloroacetone and/or ethyl bromoacetate yielded the thiazolylidene-pyrazolyl thiophenes. In addition, the building block 3-(3-amino-5-(phenylamino)-4-(phenylcarbamoyl)thiophen-2-yl)-3-oxopropanoate was converted into the corresponding thieno[3,2-b]pyridine compounds through its reactions with (DMF-DMA) and/or heating in sodium ethoxide. Moreover, the reaction of 7-hydroxy-5-oxo-N-phenyl-2-(phenylamino)-4,5-dihydrothieno[3,2-b]pyridine-3-carboxamide with 2-arylidenemalononitrile produced the new annulated pyrano[2,3-d]thieno[3,2-b]pyridines. The prepared thiophene-based compounds were evaluated against HepG2, PC3, and MCF-7 cancer cells, and normal fibroblast cell (WI38). The pyrazolo[3,4-d]thieno[3,2-b]pyridine and pyrano[2,3-d]thieno[3,2-b]pyridine compounds substituted with chlorophenyl group presented promising cytotoxic activities against HepG2 cancer cell line without any human toxicity. Docking study for the synthesized thiophene compounds delivered valuable insights about the binding interactions with the crystal structure of NS5B enzyme with PDB ID (4TLR).     

Diversity‐Oriented Synthesis of Substituted Benzo[b]thiophenes and Their Hetero‐Fused Analogues through Palladium‐Catalyzed Oxidative CH Functionalization/Intramolecular Arylthiolation

An efficient, high yielding route to multisubstituted benzo[b]thiophenes has been developed through palladium‐catalyzed intramolecular oxidative C?H functionalization–arylthiolation of enethiolate salts of α‐aryl‐β‐(het)aryl/alkyl‐β‐mercaptoacrylonitriles/acrylates or acrylophenones. The overall strategy involves a one‐pot, two‐step process in which enethiolate salts [generated in situ through base‐mediated condensation of substituted arylacetonitriles, deoxybenzoins, or arylacetates with (het)aryl (or alkyl) dithioates] are subjected to intramolecular C?H functionalization–arylthiolation under the influence of a palladium acetate (or palladium chloride)/cupric acetate catalytic system and tetrabutylammonium bromide as additive in N,N‐dimethylformamide (DMF) as solvent. In a few cases, the yields of benzo[b]thiophenes were better in a two‐step process by employing the corresponding enethiols as substrates. In a few examples, Pd(OAc)₂ (or PdCl₂) catalyst in the presence of oxygen was found to be more efficient than cupric acetate as reoxidant, furnishing benzothiophenes in improved yields by avoiding formation of side products. The method is compatible with a diverse range of substituents on the aryl ring as well as on the 2‐ and 3‐positions of the benzothiophene scaffold. The protocol could also be extended to the synthesis of a raloxifene precursor and a tubulin polymerization inhibitor in good yields. The versatility of this newly developed method was further demonstrated by elaborating it for the synthesis of substituted thieno‐fused heterocycles such as thieno[2,3‐b]thiophenes, thieno[2,3‐b]indoles, thieno[3,2‐c]pyrazole, and thieno[2,3‐b]pyridines in high yields. A probable mechanism involving intramolecular electrophilic arylthiolation via either a Pd‐S adduct or palladacycle intermediate has been proposed on the basis of experimental studies.     

Improved EL efficiency of fluorene‐thieno[3,2‐b]thiophene‐based conjugated copolymers with hole‐transporting or electron‐transporting units in the main chain

New electroluminescent polymers (poly(9,9′‐dioctylfluorene‐co‐thieno[3,2‐b]thiophene‐co‐benzo[2,3,5]thiadiazole) ( P1) and poly(9,9′‐dioctylfluorene‐co‐thieno[3,2‐b]thiophene‐co‐benzo[2,3,5]thiadiazole‐co‐[4‐(2‐ethylhexyloxyl)phenyl]diphenylamine ( P2) ) possess hole‐transporting or electron‐transporting units or both in the main chains. Electron‐deficient benzothiadiazole and electron‐rich triphenylamine moieties were incorporated into the polymer backbone to improve the electron‐transporting and hole‐transporting characteristics, respectively. P1 and P2 show greater solubility than poly(9,9′‐dioctylfluorene‐co‐thieno[3,2‐b]thiophene ( PFTT ), without sacrificing their good thermal stability. Moreover, owing to the incorporation of the electron‐deficient benzothiadiazole unit, P1 and P2 exhibit remarkably lower LUMO levels than PFTT , and thus, it should facilitate the electron injection into the polymer layer from the cathode electrode. Consequently, because of the balance of charge mobility, LED devices based on P1 and P2 exhibit greater brightness and efficiency (up to 3000 cd/m² and 1.35 cd/A) than devices that use the pristine PFTT . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 243–253, 2006     

A metal-free,one-pot route to substituted benzo[b]thiophenes and their hetero-fused analogs via iodine mediated intramolecular arylthiolation of in situ generated β-(het)aryl-β-cyanoenethiolates

A metal-free one-pot route to substituted 3-cyanobenzo[b]thiophenes has been developed via iodine mediated intramolecular arylthiolation of 2-(het)aryl-2-cyanoenethiolates generated in situ by base mediated condensation of arylacetonitriles and (het)aryl dithioesters. The methodology has been further extended to the synthesis of 2-aminobenzo[b]thiophenes as well as hetero-fused thiophenes such as thieno[2,3-b]thiophenes, thieno[2,3-b]indoles and thieno[3,2-c]pyrazoles. An electrophilic cyclization mechanism has been proposed based on experimental observations.     

Angular polycyclic thiophenes containing two thiophene rings. I

We describe the synthesis of thieno[2,3-c]dibenzothiophene ( 6 ), thieno[3,2-c]dibenzothiophene ( 10 ), thieno-[3,2-a]dibenzothiophene ( 14 ), thieno[2,3-a]dibenzothiophene ( 16 ), benzo[1,2-b:4,3-b]bisbenzo[b]thiophene ( 18 ), benzo[1,2--6:3,4-b]bisbenzo[b]thiophene ( 20 ), benzo[2,1--6:3,4-b]bisbenzo[b]thiophene ( 22 ), benzo[1,2-b:3,4-g]bisbenzo[b]thiophene ( 27 ), benzo[1,2-b:4,3-e]bisbenzo[b]thiophene ( 29 ), benzo[2,1--6:3,4-g]bisbenzo[b]thiophene ( 36 ), benzo[2,1--6:4,3-e]bisbenzo[b]thiophene ( 38 ), benzo[1,2--6:4,3-g]bisbenzo[b]thiophene ( 41 ), benzo[1,2-b:4,5-g]bisbenzo[b]thiophene ( 42 ), benzo[1,2-b:3,4-e]bisbenzo[b]thiophene ( 44 ) and benzo-[1,2-b:5,4-e]bisbenzo[b]thiophene ( 45 ).     

Synthesis of novel azonia Helicenes containing terminal thiophene rings

The Knoevenagel condensation of the 9‐methyl derivatives of thieno[3,2‐a]‐ and thieno[2,3‐a]‐quinolizinium salts ( 2b and 3b ) with appropriate arylaldehydes yielded 9‐(arylvinyl)thieno[3,2‐a]‐ and 9‐(arylvinyl)thieno[2,3‐a]quinolizinium salts ( 4a‐c and 5a‐c ), respectively, which underwent photocyclization to give a series of novel hetero[5]helicenes ( 6a,b and 7a‐d ) containing quinolizinium and thiophene rings.     

New copolymers with thieno[3,2‐b]thiophene or dithieno[3,2‐b:2′,3′‐d]thiophene units possessing electron‐withdrawing 4‐cyanophenyl groups: Synthesis and photophysical,electrochemical, and electroluminescent properties

New monomers containing 4‐cyanophenyl (–PhCN) groups attached to a thieno[3,2‐b]thiophene (TT) or dithieno[3,2‐b:2′,3′‐d]thiophene (DTT) structure were synthesized and characterized as 4‐(2,5‐dibromothieno[3,2‐b]thiophen‐3‐yl)benzonitrile (Br–TT–PhCN) or 4,4′‐(2,6‐dibromodithieno[3,2‐b:2′,3′‐d]thiophene‐3,5‐diyl)dibenzonitrile (Br–DTT–PhCN). The Suzuki coupling of 9,9‐dioctylfluorene‐2,7‐diboronic acid bis(1,3‐propanediol)ester and the Br–TT–PhCN or Br–DTT–PhCN monomer was utilized for the syntheses of novel copolymers poly{9,9‐dioctylfluorene‐2,7‐diyl‐alt‐3‐(4′‐cyanophenyl)thieno[3,2‐b]thiophene‐2,5‐diyl} (PFTT–PhCN) and poly{9,9‐dioctylfluorene‐2,7‐diyl‐alt‐3,5‐bis(4′‐cyanophenyl)dithieno[3,2‐b:2′,3′‐d]thiophene‐2,6‐diyl} (PFDTT–PhCN), respectively. The photophysical, electrochemical, and electroluminescent (EL) properties of these novel copolymers were studied. Their photoluminescence (PL) exhibited the same emission maximum for both copolymers in solution. Red‐shifted PL emissions were observed in the thin films. The PL emission maximum of PFTT–PhCN was more significantly redshifted than that of PFDTT–PhCN, indicating more pronounced excimer or aggregate formation in PFTT–PhCN. The ionization potential (HOMO level) and electron affinity (LUMO level) values were 5.54 and 2.81 eV, respectively, for PFTT–PhCN and were 5.57 and 2.92 eV, respectively, for PFDTT–PhCN. Polymer light‐emitting diodes (LEDs) with copolymer active layers were fabricated and studied. Anomalous behavior and memory effects were observed from the current–voltage characteristics of the LEDs for both copolymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2629–2638     

3,6‐Dialkylthieno[3,2‐b]thiophene moiety as a soluble and electron donating unit preserving the coplanarity of photovoltaic low band gap copolymers

It has been shown recently, that the presence of alkyl side chains at the 3‐positions on the thiophene rings placed next to 2,1,3‐benzothiadiazole core in the backbone of several conjugated polymers results in severe steric hindrance and prevents efficient planarity of the thiophene‐2,1,3‐benzothiadiazole‐thiophene (TBzT) segment. Both properties have a strong influence on the optoelectronic properties of the polymer and need to be considered when the polymer is to be used for organic electronics applications. In this work, we modified a previously synthesized oligothiophene copolymer, consisting of two 3,4′‐dialkyl‐2,2′‐bithiophene units attached to a 2,1,3‐benzothiadiazole unit (TBzT segment) and a thieno[3,2‐b]thiophene unit, by optimizing the lateral alkyl side chains following a density functional theory investigation. It is demonstrated that eliminating the alkyl side chains from the 3‐positions of the TBzT segment and anchoring them onto the thieno[3,2‐b]thiophene, using an efficient synthesis of the 3,6‐dihexylthieno[3,2‐b]thiophene unit, allows us to reduce the energy band gap. In addition, the chemical modification leads to a better charge transport and to an enhanced photovoltaic efficiency of polymer/fullerene blends. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of oxazolo[3,2‐b]hetero[1,2,4]thiadiazine S,S‐dioxides

Six bromomethyl derivatives of the new 2,3‐dihydrooxazolo[3,2‐b]thieno[3,4‐e][1,2,4]thiadiazine 5,5‐dioxides, 2,3‐dihydrooxazolo[3,2‐b]thieno[2,3‐e][1,2,4]thiadiazine 5,5‐dioxides and 6,7‐dihydrooxazolo‐[3,2‐b]pyrazolo[4,3‐e][1,2,4]thiadiazine 9,9‐dioxides heterocyclic ring systems were synthesized. These compounds are good intermediates for the preparation and development of promising antiviral and psy‐chotropic drugs. The structures of the products are supported by different nmr spectroscopic methods and mass spectrometry.     

Electrochemical and optical studies of furan and thieno[3,2‐b]thiophene end capped benzotriazole derivatives

Two new 2‐dodecyl benzotriazole (BTz) based donor‐acceptor‐donor (DAD) type polymers were synthesized and characterized in terms of their electrochemical and spectral properties. These DAD type polymers were synthesized electrochemically from furan or thieno[3,2‐b]thiophene (TT) end‐capped BTz monomers. Furan based and thieno[3,2‐b]thiophene based monomers showed monomer oxidations at 1.15 and 1.25 V, respectively, which eased the formation of conducting polymer films without overoxidation. Cyclic voltammetry and spectroelectrochemistry studies showed that both materials are multicolored electrochromic polymers. Results and comparison with properties of other BTz based DAD type polymers are highlighted in detail. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Programmed Site‐Selective Palladium‐Catalyzed Arylation of Thieno[3,2‐b]thiophene

Mono‐, di‐, tri‐, and tetraarylated thieno[3,2‐b ]thiophenes were synthesized by direct site‐selective Pd‐catalyzed C−H activation reactions with various aryl bromides in the presence of a phosphine‐free Pd(OAc)₂/KOAc catalyst system in N ,N ‐dimethylacetamide (DMAc). The arylation of 2‐arylthieno[3,2‐b ]thiophene took place at the C3 position if the 2‐aryl substituents possessed electron‐withdrawing groups and at the C5 position if they were bulky and possessed electron‐donating groups.     

Intramolecular cyclization of amido acids into pyrrolidinothieno(or [1]benzothieno)[3]azepinediones

The synthesis of pyrrolidino[2,1-b]thieno[3,2(2,3)-f][3]azepinediones 7a,b and pyrrolidino[2,1-b]-[1]benzothieno[3,2(2,3)-f][3]azepinediones 7c,d are described starting from thiophenes or [1]benzothio-phenes acetic acids. Their selective reduction using triethylsilane led to the corresponding azepinones 17a-d.