Preparation and properties of dinitrogen trimethylphosphine complexes of molybdenum and tungsten—II: Synthesis and crystal structures of [MCl(N2)(PMe3)4] (M = Mo,W) and trans-[MoCl2(PMe3)4]

Sodium amalgam reduction of the complexes [MCl₃(PMe₃)₃] (M = Mo, W) in tetrahydrofuran, under dinitrogen, yields dark red-brown suspensions from which red-orange crystals of composition trans-[MCl(N₂)· (PMe₃)₄] can be collected. Spectroscopic and chemical evidence indicate the compounds are best formulated as mixtures of trans-[M(N₂)₂(PMe₃)₄] and trans-[MCl₂(PMe₃)₄] species, but attempts to isolate the pure bis(dinitro derivatives have proved unsuccessful. Single crystals of analytical composition [MCl(N₂)(PMe₃)₄] have been studied by X-ray crystallography, and the structure of trans-[MoCl₂(PMe₃)₄] has been determined for comparison. trans-[MCl(N₂)(PMe₃)₄] (M = Mo, W) and trans-[MoCl₂(PMe₃)₄] are all isostructural, crystallizing in the tetragonal space group I$\text{4}$2 trans-[MoCl(N₂)(PMe₃)₄] has a = 9.597(5), b = 12.294(6) Å, D_c = 1.36g cm^?3 Z = 2 and was refined to a final R value of 0.021 based on 319 independent observed reflections. The tungsten analogue has a = 9.573(4), b = 12.278(5) Å, D_c = 1.63g cm^?3 for Z = 2 and was refined to R = 0.19 with 322 independent observed reflections. trans-[MoCl₂(PMe₃)₄] has cell parameters a = 9.675(5), b = 12.311(6) Å D_c = 1.36 g cm^?3 for Z = 2 and was refined to R = 0.043 with 316 independent observed reflections. In each case the metal atom resides on a crystallographic $\text{4}$2m position. For trans-[MoCl(N₂)(PMe₃)₄] (M = Mo, W) the chlorine and dinitrogen ligands are disordered. M-N distances of 2.08(1) ? (M = Mo) and 2.04(2) ? (M = W) and M-Cl bond lengths of 2.415(8) Å (M = Mo) and 2.46(1) Å (M = W) are observed. In trans-[MoCl₂(PMe₃)₄], where there is no disorder, the Mo-Cl distance is 2.420(6) Å.     

Synthesis and reactivity of a novel hydridocobalt(III) complex containing trimethylphosphine and thiophenolato ligands

The novel hydridocobalt(III) complex [mer-Co(H)(SPh)₂(PMe₃)₃] (1) was prepared by reaction of thiophenol with [Co(PMe₃)₃Cl], [Co(PMe₃)₄] and [Co(PMe₃)₄Me]. A dinuclear cobalt dithiophenolato complex [Co(PMe₃)₂(SPh)]₂ (2) was obtained from the reaction of thiophenol with [Co(PMe₃)₄Me]. Reaction of 1 with iodomethane afforded complex [Co(PMe₃)₃(I)₂] (3). Reaction of complex 2 with carbon monoxide gave a mononuclear dicarbonyl cobalt(I) complex [Co(PMe₃)₃(CO)₂(SPh)] (4). The crystal structures of 1-4 were determined by X-ray diffraction. Formation mechanism of 1 is discussed.     

Cluster chemistry XXIV. X-ray structure of H4 Ru4(CO)9(PMe2 Ph)[P(OC6H4 Me-p)3]-[P(OCH2)3CEt], a chiral cluster complex containing four different ligands

The X-ray structure of H₄Ru₄(CO)₉(PMe₂Ph)[P(OC₆H₄Me-p)₃][P(OCH₂)₃CEt], a chiral cluster complex, has been determined. The complex is triclinic, space group P$\text{1}$, a 19.812(7), b 14.299(4), c 10.323(4) Å, α 100.09(3), β 98.18(3), γ 102.23(3)°. The unit cell contains an enantiomeric pair of molecules. The Ru₄ core contains two short (av. 2.785 Å) and four long (2.967 Å) RuRu separations with approximate D_2d symmetry. RuP separations are 2.254(6) Å [to P(OCH₂)₃CEt], 2.270(6) Å [to P(OC₆H₄Me-p)₃] and 2.326(7) Å [to PMe₂Ph]; all P-donor ligands are trans to short RuRu vectors.     

Modification of the acid-base properties of hydroxycarbonyl complexes of iridium(III) by substitution of carbon monoxide by a tertiary phosphine ligand

A dichloromethane solution of the cationic carbonyl complex [IrCl₂(CO)(PMe₂Ph)₃)][ClO₄] reacts with aqueous KOH to give [IrCl₂(CO₂H)(PMe₂Ph)₃] which has been characterised spectroscopically. This CO₂H compound is very much more basic and very much less acidic than [IrCl₂(CO₂H)(CO)(PMe₂Ph)₂). Tertiary amines will not deprotonate [IrCl₂(CO₂H)(PMe₂Ph)₃] while Li[N(SiMe₃)₂] leads to decarboxylation products trans, mer- and cis, mer-[IrHCl₂(PMe₂Ph)₃]. The mechanisms of these reactions are considered and the hydroxycarbonyl complex is compared with its formato isomer which decarboxylates much less readily.     

Darstellung ylidischer metallacyclopropankomplexe durch ringverkleinerung metallacyclischer vinylketonkomplexe. Molekülstruktur von C5H5W(CO)2[(PMe3)HC-CH(COMe)]

The addition of trimethylphosphane to five-membered metallacyclic vinylketone complexes of the type Ar$\text{M(CO)}{}_2\text{(HCCHCO}$R) (I) (Ar = η⁵-aromatic ring system: C₅H₅, C₅H₄Me, C₅Me₅; R = Me, Et, n-Bu; M = Mo, W) in pentane solution results in the formation of the ylidic metallacyclopropane complexes Ar$\text{M(CO)}{}_2\text{[(PMe}{}_3\text{)-HCC}$H(COR)] (II). In these 1:1 adducts the three-membered ring is stabilized by an electron-donating phosphonium and an electron-attracting acyl substituent. The negative charge in the ylidic complexes II is localized on the central metal providing it with Lewis base properties. An extraordinary high electron density can be observed on the metal of the derivative C₅H₅$\text{W(CO)(PMe}{}_3\text{)[(PMe}{}_3\text{)HCC}$H-(COMe)] (III) which is formed by a 1:2 addition of C₅H₅W(CO)(C₂H₂)-(COMe) and PMe₃. The metallacyclopropane complexes II and III are characterized by IR, ¹H NMR, ¹³C NMR, ³¹P NMR and mass spectroscopy. For C₅H₅$\text{W(CO)}{}_2\text{[(PMe}{}_3\text{)HCC}$H(COMe)], the results of an X-ray structure determination are presented.     

An improved synthesis of [2.2.3]cyclazines from 3H-pyrrolizines

[2.2.3]Cyclazines are obtained in moderate yields by reaction of 3$\text{H}$-pyrrolizines bearing conjugative substituents (Ph or CO₂Me) with vinamidinium salts in the presence of strong bases. Syntheses of the previously unknown 2-phenyl-3$\text{H}$-pyrrolizine and 1-methoxycarbonylcyclopenta [$\text{h}$] [2.2.4] cyclazine are also described.     

Inorganic Syntheses,Volume XXI : edited by J.P. Fackler,Jr., Wiley-Interscience,New York, 1982, xvii + 215 pages, £29.25.

The 1/1 reaction of Et₂Zn with N-t-butyliminopropanone (t-BuNC(H)C(Me)O) leads to quantitative formation of dinuclear [EtZ$\text{n(Et)(t-Bu)NC(H)=C(Me)O}$]₂ via ethyl transfer within the unstable Et₂Zn(t-BuNC(H)?C(Me)O) complex. An X-ray structure determination has shown the product to have a dinuclear structure involving a N,O-chelate bonded [Et(t-Bu)NC(H)C(Me)O]^? mono-anionic ligand and a central four membered Zn₂O₂ ring formed by intermolecular ZnO coordination. Hydrolysis of this zinc complex gives a quantitative yield of N-t-butyl-N-ethylamino propanone, which upon reaction with Et₂Zn reforms the dinuclear zinc complex.     

Formation of a hydroxymethyliridium(III) compound and addition of the OH bond to bound acetonitrile

The hydridoformyliridium complex [IrH(CHO)(PMe₃)₄][PF₆] (2) reacts with HBF₄/diethyl ether in acetonitrile to form the hydroxymethyl complex [Ir(CH₂OH)(CH₃CN)(PMe₃)₄][PF₆][BF₄] (4). A hydrido hydroxycarbene complex 3 is believed to be an intermediate in this reaction. The acetonitrile ligand of compound 4 undergoes base-catalyzed attack by the oxygen atom of the hydroxymethyl group to form the metallacycle compound [$\text{Ir(CH}{}_2\text{OC(CH}{}_3\text{N}$H)(PMe₃)₄][PF₆][BF₄] (5). Compound 5 cocrystallizes with [HPMe₃][BF₄] in the monoclinic space group P2₁/c, a 13.772(2), b 13.436(2), c 19.506(3) Å, β 90.02(1)°, V 3609 ų, Z = 4. Precision of the X-ray structural results is limited by disorder of all the anionic groups. Refinement of 374 variables on 5312 reflections with F_obs² > 2σ(Fobs²) has converged at R = 0.079, R_w = 0.091.     

A cyclometallated iridium(III) dimethylphenylphosphine complex

[Ir(cod)Cl]₂ (cod = 1,5-cyclooctadiene) reacts with PMe₂Ph in CH₃CN to give the red cation [Ir(PMe₂Ph)₄]⁺. This complex in CH₃CN reacts with H₂ to give cis-[IrH₂(PMe₂Ph)₄]⁺, but on reflux for 6 h in the absence of H₂, it gives the first example of a cyclometallated PMe₂Ph complex fac-[IrH(PMe₂C₆H₄)(PMe₂Ph)₃]⁺, as shown by PMR spectroscopy and preliminary X-ray crystallographic data.     

Reaktionen von metall-koordiniertem kohlenmonoxid mit yliden: XVII. Darstellung eines molybdän- und wolframkomplexes mit η3-gebundenem trimethylsiloxybutenon-liganden durch silylierung der phosphonium-metall-enolat-vorstufe

The reaction of the phosphonium metallates Me₄P[C₅R₅(CO)(Me₃P)$\text{MC(O)=CHC(O}$)R′] (M = W, R = H, R′ = Et (1a); M = Mo, R = Me, R′ = Me (1b)) with the silylating reagent Me₃SiOSO₂CF₃ yields the neutral complexes C₅R₅(CO)(Me₃P)$\text{MC(OSiMe}{}_3\text{)=CHC(O}$)R (2a, 2b) bearing a chelating O(2), C(4)-trimethylsiloxybutenone ligand. The structure of the new compounds is established by the IR, ¹H and ³¹P NMR spectra.     

Reactivity of cyclopalladated compounds: VIII. Synthesis of cyclometallated compounds with an oxygen as the donor atom. Crystal and molecular structure of (8-methylquinoline-C,N)-(1-methoxynaphthalene-8-C,O)palladium(II)

Treatment of 1-methoxynaphthalene (MXNH) with n-butyllithium in a diethyl ether/n-hexane solution gives 1-methoxynaphthalene-8-lithium (MXNLi) in 30% yield as an insoluble material. This compound reacts with PdCl₂(SEt₂)₂ to give bis(1-methoxynaphthalene-8-C,O)palladium(II) (I)_and with PtCl₂(SEt₂)₂ to give cis- and trans-(1-methoxynaphthalene-8-C,O)(1-methoxynaphthalene-8-C)(diethylsulfide)platinum(II) (II), which are non-rigid molecules in solution. With the cyclopalladated dimers [{$\text{Pd(CN}$)Cl₂}₂], MXNLi gives the palladobicyclic compounds: ($\text{N∩C)P}$$\text{d(C∩O}$) (III). An X-ray diffraction study of compound IIIa where N∩N = 8-methylquinoline-C,N reveals the planarity of the molecule, shows that it has a cis configuration with respect to the PdC bonds, and confirms that the oxygen atom of MXN is bonded to palladium: PdO 2.236(4) Å. The geometry of IIIa is maintained in solution, whereas the corresponding compounds IIIb and IIIc in which N∩C is benzo[h]quinoline-9-C,N and N,N-dimethyl-1-naphthylamine-8-C,N, respectively, appear to be mixtures of cis and trans isomers in solution. With PMe₂Ph I and II give trans-Pd(MXN)₂(PMe₂Ph)₂ and cis-Pt(MNX)₂(PMe₂Ph)₂, respectively, in which the methoxynaphthalene is bound to the metals via the 8-carbon of the naphthalene ring. Only one phosphine ligand adds to compounds IIIb and IIIc with displacement of the O → Pd bond. One carbon monoxide ligand can be added to the platinum compound II to give Pt(MXN)₂(SEt₂)CO which in solution exists as two isomers in equilibrium.     

Transition Metal Chemistry of Main Group Hydrazides. 17. Triphosphine derived from phosphanyl hydrazide as a building block for hetero trimetallic compounds. Synthesis and coordination chemistry of ((Me2P)2N?N(Me)(PMe2))

The new triphosphine (Me₂P)₂N? N(Me)(PMe₂) ( 1 ), has been synthesized in pure form by the reaction of methylhydrazine with dimethylchlorophosphine in the presence of triethylamine. This triphosphine represents a bridge between phosphinoamine (>P? N(R)? P<) and phosphanyl hydrazide (>P? N(R)? N(R)? P<) backbones. Reaction of 1 with cis-[W(CO)₄(NHC₅H₁₀)₂] proceeds via two coordination modes to give four-membered M? P? N? P and five-membered M? P? N? N? P metallacyclic frameworks. The tungsten complex cis-[W(CO)₄{(Me₂P)₂NN(Me)(PMe₂)}] ( 2 ) possessing an uncoordinated phosphine moiety to prepare multimetallic organometallic compounds. For example, reactions of 2 with PdCl₂(PhCN)₂ and PtCl₂(COD) produced the trimetallic complexes consisting of W(0)? Pt(II) and W(0)? Pd(II) centers respectively in good yields. The different isomers of these trinuclear complexes have been clearly identified by ³¹P NMR spectroscopy.     

Unusual rearrangement of σ-vinylpalladium complexes into η2-olefin complexes. The structure of (η2-1-triphenylphosphonium-2-carbomethoxyethylene)(triphenylphosphine)iodopalladate

β-Substituted σ-vinylpalladium complexes [Pd(σ-CHCHCOOR)(PPh₃)₂(X)] (I) (X = Cl, I; R = Me, Et) have been obtained by interaction of the E- and Z-β-halogen acrylates with tetrakis(triphenylphosphine)palladium. On heating complexes I rearrange into isomeric η²-olefin-ylidepalladium complexes [$\text{P}$$\text{dCH(COOR)-C}$HPPh₃(PPh₃)(X)] (II). The structure of these com X-ray study of the compound with X = I, R = Me.     

Synthesis of cationic dialkylgold(III) complexes: nature of the facile reductive elimination of alkane

A series of gold(III) cations of the type cis-[CH₃)₂AuL₂]⁺ X^? where L  Ph₃, PMePh₂, PMe₂Ph, PMe₃, AsPh₃, AsPh₃, SbPh₃, $\text{1}\text{2}$H₂NCH₂CH₂NH₂, $\text{1}\text{2}$ Ph₂PCH₂CH₂-PPh₂, $\text{1}\text{2}$ Ph₂AsCH₂CH₂AsPh₂, and $\text{1}\text{2}$o-C₆H₄(AsMe₂)₂ and X  BF₄^?, PF₆^?, ClO₄^?, and F₃CSO₃^? has been prepared. In addition, the cis complexes [(CH₃)(CD₃)-Au(PPh₃)₂]F₃CSO₃, [(C₂H₅)₂Au(PPh₃)₂]F₃CSO and [(n-C₄H₉)₂Au(PPh₃)₂]F₃-CSO₃ have been synthesized. All have been characterized by PMR, Raman and infrared spectroscopy. These [R₂AuL₂]X compounds yield only ethane, butane, or octane via reductive elimination, and no disproportionation is observed. The alkane eliminations have been studied in CHCl₃, CH₃Cl₂, and CH₃COCH₃ solution as a function of temperature, concentration of the complex, and concentration of added ligand L. Elimination is fastest when L is bulky (PPh₃ > PMePh₂ > PMe₂Ph > PMe₃), decreases in the sequence SbPh₃ > AsPh₃ > PPh₃, is slow with chelating ligands, is inhibited by excess ligand, and there is small anion effect as X is varied. As R is varied, the rate of elimination decreases Bu ? Et > Me. An intramolecular dissociative mechanism is proposed which involves rapid elimination of alkane from an electron deficient dialkylgold(III) complex with nonequivalent gold—carbon bonds and produces the corresponding [AuL₂]X complex.