Pistacia integerrima gall extract mediated green synthesis of gold nanoparticles and their biological activities

This paper reports a rapid, facile and one-pot synthesis of environmentally safe gold nanoparticles capped and stabilized with galls extract of Pistacia integerrima. The aqueous gold ions when exposed to P. integerrima galls extract were rapidly reduced as evident from abrupt color change to ruby red, suggesting the biosynthesis of gold nanoparticles (Au-NPs) which were further characterized by UV–Vis spectroscopy, Fourier transform infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM). Their stability was evaluated against varying pH and different volumes of sodium chloride (NaCl) as well as at a range of temperature (20–80 °C). Au-NPs were tested for enzyme inhibition, antibacterial, antifungal, antinociceptive, muscle relaxant and sedative activities. The UV–Vis spectra of the gold nanoparticles gave surface plasmon resonance at 540 nm while the SEM analysis revealed the particle size in the range of 20–200 nm. FTIR spectra confirmed the involvement of amines, amide groups and alcohols in capping and reduction of gold nanoparticles. Au-NPs showed remarkable stability in different NaCl and pH solutions as well as at elevated temperature. Au-NPs have good antifungal activity and possessed antinociceptive and muscle relaxant properties as observed from their zone of inhibition and significant attenuation of acetic acid induced writhing and reduction of time spent on the rota rod respectively. These results concluded that the gall extract of P. integerrima is a very good bioreductant for the synthesis of gold nanoparticles that have potential for various biomedical and pharmaceutical applications.     

Synthesis of TiO2 nanoparticles by electrochemical method and their antibacterial application

Titanium dioxide nanoparticles were successfully prepared by electrochemical method. The tetra propyl ammonium bromide salt was used as stabilizing agent in an organic medium viz. tetra hydro furan (THF) and acetonitrile (ACN) in 4:1 ratio by optimizing current density. The parameters such as current density, solvent polarity, distance between electrodes and concentration of stabilizers were used to control the size of nanoparticles. The synthesized titanium dioxide nanoparticles were characterized by using UV–Visible spectroscopy, X-ray diffraction, scanning electron microscopy (SEM), energy dispersive spectrophotometer (EDS) and transmission electron microscopy (TEM) analysis techniques. TEM analysis proved a nearly tetragonal structure with size of 25–30 nm which was in agreement with the result calculated from the XRD analysis. EDS analysis revealed the presence of Ti and O element. The nanoparticles were screened for their in vitro antibacterial activity against human pathogens such as gram negative Escherichia coli (E. coli), and gram positive Staphylococcus aureus strains and which proved excellent results.     

Synthesis and characterization of gold nanoparticles stabilized by palladium(II) phosphine thiol

This work is focused on the synthesis of innovative hybrids made by linking gold nanoparticles to protected organometallic Pd(II) thiolate. The organometallic protected Pd(II) thiolate, i.e. trans-thioacetate-ethynylphenyl-bis(tributylphosphine)palladium(II) has been synthesized, in situ deprotected and linked to Au nanoparticles. In this way new hybrid, with a direct link between Pd(II) and Au nanoparticles through a single S bridge, has been isolated. The combination of the organometallic Pd(II) thiol with gold nanoparticles allows the enhancement and tailoring of electronic and optical properties of the new organic-inorganic nano-compound. Single-crystal gold nanoparticles, uniform in shape and size were obtained by applying a modified two-phase method (improved Brust-Schiffrin reaction). In addition, the chemical environment of the Au nanoparticles was investigated and a covalent bonding between Au nanoparticles and the organometallic thiols was observed.     

Synthesis of hollow and nanoporous gold/platinum alloy nanoparticles and their electrocatalytic activity for formic acid oxidation

In this work, hollow Au/Pt alloy nanoparticles (NPs) with porous surfaces were synthesized in a two-step procedure. In the first step, tri-component Ag/Au/Pt alloy NPs were synthesized through the galvanic replacement reaction between Ag NPs and aqueous solutions containing a mixture of HAuCl₄ and H₂PtCl₄. In the second step, the Ag component was selectively dealloyed with nitric acid (HNO₃), resulting in hollow di-component Au/Pt alloy NPs with a porous surface morphology. The atomic ratio of Au to Pt in the NPs was easily tunable by controlling the molar ratio of the precursor solution (HAuCl₄ and H₂PtCl₆). Hollow, porous Au/Pt alloy NPs showed enhanced catalytic activity toward formic acid electrooxidation compared to the analogous pure Pt NPs. This improved activity can be attributable to the suppression of CO poisoning via the “ensemble” effect.     

Synthesis, characterization of cobalt(II) complex nanoparticles encapsulated within nanoreactors of zeolite-Y and their catalytic activities

Cobalt(II) complex nanoparticles of [14]aneN₄: 1,5,8,12-tetraaza-2,9-dioxo-4,11-diphenylcyclotetradecane; [16]aneN₄: 1,5,9,13-tetraaza-2,10-dioxo-4,12-diphenylcyclohexadecane; Bzo₂[14]aneN₄: dibenzo-1,5,8,12-tetraaza-2,9-dioxo-4,11-diphenylcyclotetradecane and Bzo₂[16]aneN₄: dibenzo-1,5,9,13-tetraaza-2,10-dioxo-4,12-diphenylcyclohexadecane have been encapsulated in the nanopores of zeolite-Y by a two-step process in the liquid phase: (i) adsorption of [bis(diamine)cobalt(II)] (diamine = 1,2-diaminoethane, 1,3-diaminopropane, 1,2-diaminobenzene, 1,3-diaminobenzene); [Co(N–N)₂]²⁺–NaY; in the nanopores of the zeolite-Y, and (ii) in situ condensation of the cobalt(II) precursor complex with ethylcinnamate. The new complex nanoparticles entrapped in the nanoreactor of zeolite-Y were characterized by several techniques: BET, chemical analysis and spectroscopic methods (FT-IR, UV–vis, XRD, and DRS). These complexes (neat and encapsulated) were used for epoxidation of styrene with O₂ as oxidant in different solvents. Electronic spectra of the reaction mixture indicated that the oxidation proceeds through a free radical mechanism.     

Preparation of PAMAM- and PPI-metal (silver, platinum, and palladium) nanocomposites and their catalytic activities for reduction of 4-nitrophenol

Dendrimer-metal (silver, platinum, and palladium) nanocomposites are prepared in aqueous solutions containing poly(amidoamine) (PAMAM) dendrimers with surface amino groups (generations 3, 4, and 5) or poly(propyleneimine) (PPI) dendrimers with surface amino groups (generations 2, 3, and 4). The particle sizes of the metal nanoparticles obtained are almost independent of the generation as well as the concentration of the dendrimer for both the PAMAM and the PPI dendrimers; the average sizes of silver, platinum, and palladium nanoparticles are 5.6-7.5, 1.2-1.6, and 1.6-2.0 nm, respectively. It is suggested that the dendrimer-metal nanocomposites are formed by adsorbing the dendrimers on the metal nanoparticles. Studies of the reduction reaction of 4-nitrophenol by these nanocomposites show that the rate constants are very similar between PAMAM and PPI dendrimer-silver nanocomposites, whereas the rate constants for the PPI dendrimer-platinum and -palladium nanocomposites are greater than those for the corresponding PAMAM dendrimer nanocomposites. In addition, it is found that the rate constants for the reduction of 4-nitrophenol involving all the dendrimer-metal nanocomposites decrease with an increase in the dendrimer concentrations, and the catalytic activity of dendrimer-palladium nanocomposites is highest.     

Synthesis of mesoporous-silica coated multi-branched gold nanoparticles for surface enhanced Raman scattering evaluation of 4-bromomethcathinone

Mesoporous silica-coated multi-branched gold nanoparticles (bAu@mesoSiO₂) aiming for enhanced Raman sensing for 4-bromomethcathinone (4-BMC) detection is reported. In this work, we present an effective strategy to probe the Raman signal of 4-MBC. Morphologies and optical properties of the synthesized materials with different [Au³⁺]/[Au⁰] ratios are characterized utilizing transmission electron microscopy (TEM), UV–vis and mid-infrared spectroscopy. Both experimental and theoretical (simulation) studies were investigated. Taking advantages of gold core branches that provide highly localized and strongly enhanced electromagnetic fields due to plasmon resonance, surface-enhanced Raman scattering (SERS) is observed. The experimental results show that the SERS intensity exhibits a 100-fold increase with the increased average length and quantity of gold branches (nano tips). The analytical performance yielded a detection limit of 0.1?mg/ml for the 4-MBC target within 5?mins. The sensing method will likely find further improvement and broad use in the forensic science. Besides rapid detection and portability, the combination of the Raman effect and enhanced materials imparts other notable advantages, such as its non-contact and free of reagents.     

Synthesis, characterization, and electrochemiluminescence of luminol-reduced gold nanoparticles and their application in a hydrogen peroxide sensor

It was found that chloroauric acid (HAuCl(4)) could be directly reduced by the luminescent reagent luminol in aqueous solution to form gold nanoparticles (AuNPs), the size of which depended on the amount of luminol. The morphology and surface state of as-prepared AuNPs were characterized by transmission electron microscopy, UV/visible spectroscopy, X-ray photoelectron spectroscopy, FTIR spectroscopy, and thermogravimetric analysis. All results indicated that residual luminol and its oxidation product 3-aminophthalate coexisted on the surface of AuNPs through the weak covalent interaction between gold and nitrogen atoms in their amino groups. Subsequently, a luminol-capped AuNP-modified electrode was fabricated by the immobilization of AuNPs on a gold electrode by virtue of cysteine molecules and then immersion in a luminol solution. The modified electrode was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy. The as-prepared modified electrode exhibited an electrochemiluminescence (ECL) response in alkaline aqueous solution under a double-step potential. H2O2 was found to enhance the ECL. On this basis, an ECL sensor for the detection of H2O2 was developed. The method is simple, fast, and reagent free. It is applicable to the determination of H2O2 in the range of 3x10(-7)-1x10(-3) mol L(-1) with a detection limit of 1x10(-7) mol L(-1) (S/N=3).     

Synthesis of gold nanoparticles using herbal Acorus calamus rhizome extract and coating on cotton fabric for antibacterial and UV blocking applications

Gold nanoparticles (AuNPs) have been synthesized by greener method using chloroauric acid as precursor and extract of Acorus calamus rhizome as reducing agent. Formation of AuNP was confirmed by the presence of Surface Plasmon Resonance (SPR) peak in UV–Visible spectral analysis. XRD and FT-IR spectral analyses were performed for characterization. SEM images show spherical morphology and HR-TEM images reveal nanosize of AuNPs. The AuNPs were then coated on cotton fabric by pad-dry-cure method and characterized by SEM with EDAX technique. The results reveal the deposition of AuNPs on the surface of cotton fabric. Uncoated cotton, neat extract coated cotton and extract containing AuNPs coated cotton fabrics were then tested for antibacterial activity against Gram positive (Staphylococcus aureus) and Gram negative (Escherichia coli) bacterial strains by AATCC 100 test method. It showed that the extract containing AuNPs coated cotton fabric had higher antibacterial activity than other test samples against E. coli. UV-DRS analysis performed on extract containing AuNPs coated cotton fabric showed improved UV-blocking property than uncoated cotton fabric and neat extract coated cotton fabric.     

Effect of size and shape controlled biogenic synthesis of gold nanoparticles and their mode of interactions against food borne bacterial pathogens

In this study, size and shape controlled biogenic synthesis of gold nanoparticles and their antibacterial activity against food borne bacterial pathogens were investigated. Synthesis of gold nanoparticles was carried out using two medicinally important plants Cucurbita pepo and Malva crispa and the size and shape of the nanoparticles were controlled by altering various parameters in the reaction medium. Results obtained from UV–Vis, FE-SEM, EDS and HR-TEM analyses supported the nanoparticles formation. FT-IR analysis confirmed the presence of biomolecules in the plant leaves extracts responsible for reducing and capping agents. Interestingly, the plant extract synthesized gold nanoparticles showed effective inhibition zone against Gram-positive and Gram-negative pathogens. The minimum inhibitory concentration (MIC) of synthesized gold nanoparticles at 400 μg/ml concentration showed effective inhibitory activity against Escherichia coli and Listeria monocytogenes. Conductivity of the medium continuously increased during the nanoparticles treatment with food borne bacterial pathogens resulting in indirect indication of the disruption of bacterial cell membranes. In addition, mode of interactions of gold nanoparticles against food borne bacterial pathogens was demonstrated using Bio-TEM analysis which is clear evident for the disruption of bacterial cell membranes.     

Synthesis of H (type 4) trisaccharide,key structural fragment of globo-H and fucosyl-GM1 cancer-associated antigens

A convenient synthesis of Fucα1-2Galβ1-3GalNAcβ-OCH₂CH₂CH₂NH₂ (trisaccharide H type 4) is described. This glycan is the terminal part of glycosphingolipids globo-H and fucosyl-GM1 known as cancer-associated carbohydrate antigens.     

Optimization and evaluation of anticancer,antifungal, catalytic,and antibacterial activities: Biosynthesis of spherical-shaped gold nanoparticles using Pistacia vera hull extract (AuNPs@PV)

In the past years, use of plant sources for the biosynthesis of nanoparticles has become very important. Gold nanoparticles with unique biological properties are one of these materials which are being investigated extensively. In the present study, the aqueous extract of Pistacia vera hull was utilized to fabrication of gold nanoparticles (AuNPs@PV) in a facile, environmentally friendly, and affordable way. Then the anticancer, antifungal, antibacterial, and photocatalytic potentials of AuNPs@PV were also investigated. The results of various techniques applied, including XRD, UV–vis, TEM, FT-IR, EDS, and FESEM showed the biological reduction of Au³⁺ ions to Au⁰. Antibacterial studies were performed on a wide range of bacteria including seven strains of ATCC and seven strains of drug-resistant pathogens. According to the findings of this research, it seems that biosynthesized gold nanoparticles had good antibacterial activity against ATCC and drug-resistant strains of bacteria. The MIC values of E. coli, S. aureus, P. mirabilis, P. aeruginosa, E. faecalis, K. pneumonia, A. baumannii were 34.37, 4.2, 8.59, 4.29, 0.5, 34.37, and 8.59 μg/mL, respectively. The result of the antifungal investigation showed that two pathogenic fungi, Candida albicans (IFRC1873) and Candida albicans (IFRC1874) were susceptible to AuNPs@PV with MIC values of 550 and 137 μg/mL, respectively. Furthermore, AuNPs@PV revealed noteworthy anticancer efficacy against AGS-3 and MCF-7 cell lines with IC₅₀ values of 58.31 and 148.1 μg/mL, respectively. The results of the cytotoxicity effect of AuNPs@PV on BEAS-2B as a normal cell line indicated the selectivity of AuNPs@PV on cancerous cells. Furthermore, the fabricated AuNPs@PV under UV irradiation exhibited significant potential in the decolorization of methylene orange (MO) with a percent decolorization of 91.5 % after 20 min. Therefore, it can be concluded that biosynthesized gold nanoparticles as a photocatalyst, anti-bacterial, antifungal, and anti-cancer agents have potential applications in the fields of environment and biology.     

Green synthesis of platinum nanoparticles by Nymphaea tetragona flower extract and their skin lightening,antiaging effects

Platinum nanoparticles (PtNPs) were green synthesized by using chloroplatinic acid (H₂PtCl₆) as raw material and Nymphaea tetragona (N. tetragona) flower extract as the capping and reducing agents to improve skin health. Size-tunable PtNPs were obtained by volume ratios of the initial H₂PtCl₆/N. tetragona of 1:1 and 1:4, in which PtNPs prepared by the ratio of 1:1 and 1:4 was defined as L1-PtNPs and L4-PtNPs. Their characterizations were investigated by UV–visible spectroscopy, TEM, XRD and FTIR spectroscopy. TEM image analysis showed the particles were well dispersed with the average particle diameters of L1 and L4-PtNPs were 4.04 ± 1.31 nm and 2.01 ± 0.80 nm, respectively. The synthesized PtNPs showed effective antioxidant property and anti-tyrosinase activity in vitro. And further experiments exclaimed that PtNPs can significantly inhibit tyrosinase activity and UVB-induced melanin biosynthesis in A375 cells. This study also revealed PtNPs can promote collagen I biosynthesis in HFF-1 cells by activating the TGF-β/Smad pathway. This research showed the potential efficacy of PtNPs in the skin field and provided evidence for people to consider applying PtNPs to skin protection.     

Synthesis,structure and magnetic properties of the dinuclear complex [1,3-C6H4{NC(Ph)N(SiMe3)}2]3Dy2 coordinated by ansa-bis(amidinate) ligands with a m-phenylene linker

1. Download high-res image (135KB)
2. Download full-size image

     

Rotamers of palladium complexes bearing IR active N-heterocyclic carbene ligands: Synthesis, structural characterization and catalytic activities

The preparation and properties of mono- versus bis(carbene) Pd(II) complexes bearing unsymmetrical cyano- and ester-functionalized NHC ligands as potential IR probes were studied in detail. Direct reaction of Pd(OAc)₂ with functionalized imidazolium salts afforded either bis(carbene) (3a, c) or monocarbene complexes (5, 6) with a N-coordinated imidazole co-ligand. The latter were exclusively obtained with N-ethylene substituted salts, which were found to undergo N-C cleavage reaction. The milder Ag-carbene transfer reaction on the other hand was tolerable to the length of the substituents and the nature of the functional groups. All bis(carbene) complexes (3a-c, 4a-c) were obtained as a inseparable mixture of square-planar trans-anti and trans-syn rotamers. The identity, ratio and dynamic equilibrium of these rotamers have been investigated and the relatively high rotational barrier for rotamers of 3a was estimated to be about 74 kJ mol⁻¹ at 380 K. All eight complexes were fully characterized by NMR and IR spectroscopies, ESI mass spectrometry and X-ray single crystal and powder diffraction. A preliminary catalytic study showed that ester-functionalized complexes 4a and 4b gave rise to highly active catalyst in the double Mizoroki-Heck coupling of aryl dibromides, while the in situ ester-hydrolyzed complexes were also active in the coupling of activated aryl chlorides.     

Synthesis,crystal structures,and catalytic activities of palladium imidazole complexes formed by 2-hydroxyethyl group cleavage

N-4,6-dimethyl-2-pyrimidinylimidazole 1 and its hydroxyethyl derivative 1-(2-hydroxyethyl)-3-(4,6-dimethyl-2-pyrimidinyl)imidazolium chloride 2 have been synthesized and characterized. The attempted synthesis of bis(N-heterocyclic carbene)palladium complexes via the direct reaction of 2 with Pd(OAc)₂ results in the unexpected formation of a bis(N-arylimidazole) palladium complex 3. Additionally, the analogous bis(N-methylimidazole) palladium complex 4 has also been synthesized by the above method. Compounds 1–4 were characterized by elemental analysis, IR, and ¹H NMR. Additionally, their crystal structures have been determined by X-ray diffraction. Complexes 3 and 4 were found to be efficient catalysts for the Suzuki reaction.     

Preparation,stability and two-dimensional ordered arrangement of gold nanoparticles capped by surfactants with different chain lengths

Gold nanoparticles modified with C10NH2, C12NH2, C16NH2 and C18NH2 respectively have been prepared by the reverse micelle method. Nanoparticles stability and their two-dimensional (2D) ordered arrangement were studied by UV-Vis absorption spectra and LB technique. The factors, such as the chain length and the size distribution of particles, which affect the 2D ordered arrangement formation, are discussed. Experimental results show that the longer the chain length of surfactants capping the gold nanoparticles, the more stable the nanoparticles, and the more ordered 2D arrangement of gold nanoparticles.     

电感耦合等离子体原子发射光谱（ICP-AES）法测定高镍铜液体样品中金、钯、铂

为实现中控液体物料中金、钯、铂元素的精准定量分析,为工艺生产定向富集和高效提取提供数据支持,本文建立了ICP—AES法测定中控冶炼系统中高镍铜液体样品中金、铂和钯3种元素含量的测定方法。确定了试液用碲共沉淀,贵金属进入滤渣,经火试金分离富集得到贵金属合粒,合粒经王水溶解后,于王水介质中在电感耦合等离子光谱仪上同时测定金钯铂的量。该方法金、铂、钯的测定范围为 0.014mg/L～5mg/L,回收率为92.2%～104.4%, RSD为3.21%～10.58%,方法满足高镍、铜液体样品中金、钯、铂元素的测定。     

Ethnomedicinal plant-extract-assisted green synthesis of iron nanoparticles using Allium saralicum extract,and their antioxidant,cytotoxicity, antibacterial,antifungal and cutaneous wound-healing activities

The aim of the experiment was the evaluation of antioxidant, cytotoxicity, antibacterial, antifungal and cutaneous wound-healing activities of green synthesized iron nanoparticles using Allium saralicum R.M. Fritsch leaves (FeNPs@AS). These nanoparticles were spherical with a size range of 40–45 nm, and were characterized using various analysis techniques including ultraviolet–visible spectroscopy to determine the presence of FeNPs@AS in the solution. We studied functional groups of A. saralicum extract in the reduction and capping process of FeNPs@AS by Fourier transform-infrared spectroscopy; crystallinity and FCC planes by X-ray diffraction pattern; and surface morphology, shapes and size of FeNPs@AS by scanning electron microscopy and transmission electron microscopy. Agar diffusion tests were done to determine the antibacterial and antifungal characteristics. FeNPs@AS prevented the growth of all bacteria and removed them at 2–8 mg/ml concentrations (P ≤ 0.01). In the case of antifungal potentials of FeNPs@AS, they inhibited the growth of all fungi and destroyed them at 2–4 mg/ml concentrations (P ≤ 0.01). The 2,2-diphenyl-1-picrylhydrazyl test revealed similar antioxidant potentials for FeNPs@AS and butylated hydroxytoluene. The synthesized FeNPs@AS had great cell viability dose-dependently and indicated this method was non-toxic. For the in vivo experiment, after creating the cutaneous wound, the rats were randomly divided into six groups: treatment with 0.2% FeNPs@AS ointment; treatment with 0.2% A. saralicum ointment; treatment with 0.2% FeCl₃·6H₂O ointment; treatment with 3% tetracycline ointment; treatment with Eucerin basal ointment; and untreated control. These groups were treated for 10 days. Use of FeNPs@AS ointment in the treatment groups significantly decreased (P ≤ 0.01) the wound area, total cells, neutrophils and lymphocytes, and significantly raised (P ≤ 0.01) the wound contracture, hydroxyl proline, hexosamine, hexuronic acid, fibrocyte and fibrocytes/fibroblast rate compared with other groups. These results show that the inclusion of A. saralicum extracts improves the therapeutical properties of FeNPs, which led to a significant enhancement in the antioxidant, non-cytotoxicity, antibacterial, antifungal and cutaneous wound-healing activities of the nanoparticles.     

Synthesis of gold nanoparticles stabilized with poly(N-isopropylacrylamide)-co-poly(4-vinyl pyridine) colloid and their application in responsive catalysis

The copolymer of poly(N-isopropylacrylamide)-co-poly(4-vinylpyridine) was synthesized by free radical copolymerization of 4-vinylpyridine and N-isopropylacrylamide. The copolymer synthesized with the feed monomer ratio of 4-vinylpyridine/N-isopropylacrylamide equal to 1/3 was associated to form thermoresponsive colloid in neutral water at room temperature, the average size and the cloud-point temperature of which were 40 nm and 32 °C, respectively. The thermoresponsive colloid was used as scaffold to load 2-nm Au nanoparticles to form the responsive catalyst of colloid-stabilizing gold nanoparticles. The catalysis in the model reduction of 4-nitrophenol with NaBH₄ suggested that the catalytic reduction could be modulated due to the thermoresponsive phase-transition of the colloid-stabilizing gold nanoparticles. That was, the catalytic reduction firstly accelerated with the increase in temperature below the cloud-point temperature and then decelerated with the increase in temperature above the cloud-point temperature of the thermoresponsive colloid-stabilizing Au nanoparticles.