Catalytic asymmetric generation of (Z)-disubstituted allylic alcohols

A one-pot method for the direct preparation of enantioenriched (Z)-disubstituted allylic alcohols is introduced. Hydroboration of 1-halo-1-alkynes with dicyclohexylborane, reaction with t-BuLi, and transmetalation with dialkylzinc reagents generate (Z)-disubstituted vinylzinc intermediates. In situ reaction of these reagents with aldehydes in the presence of a catalyst derived from (-)-MIB generates (Z)-disubstituted allylic alcohols. It was found that the resulting allylic alcohols were racemic, most likely due to a rapid addition reaction promoted by LiX (X = Br and Cl). To suppress the LiX-promoted reaction, a series of inhibitors were screened. It was found that 20-30 mol % tetraethylethylenediamine inhibited LiCl without inhibiting the chiral zinc-based Lewis acid. In this fashion, (Z)-disubstituted allylic alcohols were obtained with up to 98% ee. The asymmetric (Z)-vinylation could be coupled with tandem diastereoselective epoxidation reactions to provide epoxy alcohols and allylic epoxy alcohols with up to three contiguous stereogenic centers, enabling the rapid construction of complex building blocks with high levels of enantio- and diastereoselectivity.     

Direct, stereospecific generation of (Z)-disubstituted allylic alcohols

A one-pot method to prepare highly functionalized (Z)-disubstituted allylic alcohols is introduced. Hydroboration of a variety of 1-bromo-1-acetylenes with dicyclohexyl borane, reaction with t-BuLi, and transmetalation to zinc generates a (Z)-disubstituted vinylzinc reagent. In situ reaction of this reagent with aldehydes generates (Z)-disubstituted allylic alcohols in high yields (81-97%). Addition to chiral protected alpha- or beta-oxygenated aldehydes proceeds with diastereoselectivities between 6:1 and 18:1. The anti-Felkin product is obtained in most cases.     

The synthesis of (Z)-trisubstituted allylic alcohols by the selective 1,4-hydrogenation of dienol esters: improved synthesis of (-)-β-santalol

(E)-Trisubstituted allylic alcohols are commonly prepared from the corresponding (E)-enals, themselves readily accessible by a simple aldol condensation reaction. We demonstrate that these very same (E)-enals can be converted into (Z)-trisubstituted allylic acetates (and thus alcohols) by a ruthenium-catalyzed 1,4-hydrogenation of the corresponding dienol acetates. This simple solution to a long-lasting problem was applied to an industrially feasible synthesis of (-)-β-santalol.     

Intramolecular syn and anti hydrosilylation and silicon-assisted cross-coupling: highly regio- and stereoselective synthesis of trisubstituted allylic alcohols

[reaction: see text] The geometrical isomers of 6-ethylidenedioxadisilacyclohexane were prepared by intramolecular hydrosilylation of an unsymmetrical disiloxane by the use of Pt (syn) and Ru (anti) catalysts. This new class organosilicon reagents underwent cross-coupling reactions with a range of aryl iodides to afford (E)- and (Z)-trisubstituted allylic alcohols in a highly stereospecific fashion.     

A positional scanning approach to the discovery of dipeptide-based catalysts for the enantioselective addition of vinylzinc reagents to aldehydes

[reaction: see text] A combinatorial library of dipeptide N-acylethylenediamine-based ligands was synthesized by parallel solid-phase methods. These ligands were screened in crude form as catalysts for the asymmetric addition of vinylzinc reagents to aldehydes to give chiral allylic alcohols. Three sites of diversity on the ligands were optimized using a positional scanning approach. The optimized structure from the library, ligand 54, was found to catalyze the formation of 10 different (E)-allylic alcohols with enantioselectivities ranging from 90% to 95% ee. This ligand was effective for both aromatic and alpha-branched aldehydes, and vinylzinc reagents derived from both bulky and straight chain terminal alkynes.     

Catalytic asymmetric vinylation and dienylation of ketones

A solution to the long-standing problem of catalytic asymmetric vinylation of ketones is reported. Vinylzinc reagents are generated via hydrozirconation of terminal alkynes followed by transmetalation to zinc. In the presence of our catalyst, which is formed in situ from a bis(sulfonamide) diol ligand (1) and titanium tetraisopropoxide, the vinylzinc reagent undergoes 1,2-addition to a variety of ketones and enones with enantioselectivities (typically >90%) and high yields. This method is tolerant of functional groups, including alkyl, aryl and vinyl halides, esters, silyl protected alcohols, sulfides, and alkenes. Thus, enantioenriched tertiary allylic alcohols bearing a variety of functional groups can be prepared. It has also been found that 2,2-disubstituted vinylzinc reagents, substitution patterns not accessible through hydrozirconation, can be added to ketones with high enantioselectivities to generate trisubstituted allylic alcohols. Furthermore, we have developed an asymmetric addition of dienyl groups to ketones in the presence of our catalyst. This method enables the synthesis of dienols in high yields with enantioselectivities as high as 94%.     

钯催化下(Z)-3-碘-3-三氟甲基-1-芳基烯丙醇与末端炔 烃的偶联反应

在Pd(PPh~3)~4/CuI催化下和使用1mol的NEt~3作碱和THF作溶剂,(Z)-3-碘-3-三氟甲基-1-芳基烯丙醇(1)与末端炔烃(3)反应得到正常的偶联产物5。当以NEt~3作碱和溶剂,Pd(PPh~3)~4/CuI催化1与3的交叉偶联反应生成化合物4。4为正常偶联化合物5在NEt~3存在下双键发生重排反应的产物。     

Synthesis of 3-trifluoroethylfurans by palladium-catalyzed cyclization-isomerization of (Z)-2-alkynyl-3-trifluoromethyl allylic alcohols

Hydroiodonation of trifluoromethyl propargylic alcohols 1 regio- and stereoselectively produce (Z)-2-iodo-3-trifluoromethyl allylic alcohols 2. (Z)-2-Alkynyl-3-trifluoromethyl allylic alcohols 5, available through Pd(PPh3)4-mediated coupling of 2 and terminal alkynes 4, cyclize and subsequently isomerize to 3-trifluoroethylfurans 6 upon catalysis under PdCl2(CH3CN)2 in THF at 5-10 degrees C.     

One-pot asymmetric synthesis of acyclic chiral epoxy alcohols via tandem vinylation-epoxidation with dioxygen

[reaction: see text] We have developed a one-pot procedure for the asymmetric synthesis of a synthetically challenging class of acylic secondary epoxy alcohols with three contiguous stereocenters from simple achiral starting materials. The epoxy alcohols are synthesized via a tandem catalytic asymmetric vinylation of an aldehyde coupled with a diastereoselective epoxidation reaction. A vinylzinc reagent generated in situ undergoes enantioselective addition to an aldehyde in the presence of a zinc catalyst to provide an allylic zinc alkoxide. This species is then epoxidized by addition of dioxygen and a titanium tartrate catalyst to give epoxy alcohols with excellent enantioselectivities, in most cases, and with diastereoselectivities up to 4.5:1 in favor of the threo-diastereomer. The system described herein represents a significant advance in terms of synthetic efficiency and selectivity.     

Direct preparation of allylic indium(III) reagents from allylic alcohols via a reductive transmetalation of pi-allylnickel(II) with indium(I) iodide

InI-mediated direct allylation of carbonyl compounds with allylic alcohols proceeded smoothly with catalytic amounts of Ni(acac)(2) and PPh(3) to give the corresponding homoallylic alcohols in high yields. Allylindium compounds were shown to be the real allylating agents in the present system. Substituted allylic alcohols gave branched homoallylic alcohols with syn-selectivity irrespective of the geometry of the starting allylic alcohols, whereas high anti-selectivity was observed when a bulky substituent is present in the allylic alcohols. The outcome of the diastereoselectivity is discussed on the basis of the reaction mechanism, comparing with the corresponding Pd-catalyzed version. Another distinct behavior between the Ni- and Pd-catalyzed allylation was demonstrated in the reaction of hex-1,5-diene-3,4-diol derivatives: the Pd catalyst did not give any coupling product, whereas the Ni-catalyzed InI-mediated reaction with benzaldehyde afforded the 1:1 and 1:2 adduct diols selectively depending on the reaction conditions.     

Highly selective catalytic intermolecular reductive coupling of alkynes and aldehydes

Alkynes (internal and terminal) and aldehydes (aromatic and aliphatic) are reductively coupled in a single catalytic reaction to yield di- and trisubstituted allylic alcohols with high stereoselectivity and regioselectivity. In most cases, a 1:1 ratio of alkyne to aldehyde is sufficient for efficient coupling. The yield and regioselectivity are strongly dependent on the phosphine ligand, but the allylic alcohols formed are invariably the products of cis addition to the alkyne.     

Catalytic asymmetric vinylation of ketones

This communication describes the catalytic asymmetric 1,2-addition of vinylzinc reagents to aromatic, alpha,beta-unsaturated, and dialkyl ketones with enantioselectivities between 79 and 97% and with yields ranging from 84 to 98%. The products of these reactions are tertiary allylic alcohols with chiral quaternary centers that are useful in organic synthesis. The reaction involves hydrozirconation of a terminal alkyne, transmetalation to zinc, and addition to a ketone in the presence of a chiral titanium-based Lewis acid catalyst. The reactions proceed smoothly at room temperature in under 24 h.     

Studies on the Cu(I)-catalyzed regioselective anti-carbometallation of secondary terminal propargylic alcohols

A highly regioselective Cu(I)-catalyzed anti-carbometallation of secondary terminal propargylic alcohols with 1 degrees alkyl or aryl Grignard reagents affording 2-substituted allylic alcohols was developed. By using this method, optically active allylic alcohols can be prepared from the optically active propargylic alcohols without obvious loss of the enantiopurity. The cyclic organometallic intermediate formed may undergo an iodination or a Pd(0)-catalyzed coupling reaction to afford stereo-defined allylic alcohols.     

Enantioselective addition of vinylzinc reagents to 3,4-dihydroisoquinoline N-oxide

Ligand 2a promotes the enantioselective addition of vinylzinc reagents to 3,4-dihydroisoquinoline N-oxide to yield chiral allylic hydroxylamines. With 0.1 equiv of the ligand, the product is obtained in up to 84% ee, whereas with 1.2 equiv of the ligand, the ee is increased to the 90-95% range with a variety of aliphatic, cyclic, and aromatic vinylzinc reagents. This method was used to synthesize the protected unnatural amino acid N-Cbz-d-1,2,3,4-tetrahydroisoquinoline-1-carboxylic acid in three steps from the allylic hydroxylamine.     

Regio- and stereoselective reductions of gem-difluorinated vinyloxiranes

[reaction: see text] gem-Difluorinated vinyloxiranes are versatile building blocks for the synthesis of fluorinated compounds. Investigations of their reactions with nucleophiles resulted in highly regio- and stereoselective reductions. In their reactions with LiAlH4, hydride reacted at the allylic epoxide carbon to produce homoallylic alcohols exclusively. Moreover, regio- and stereoselective S(N)2' reactions were observed with DIBAL-H and BH3 x THF; the former afforded E allylic alcohols, whereas the latter furnished the corresponding Z isomers with excellent selectivities.     

Chemistry of Ethanediyl S,S-Acetals. VII. A Stereoselective Synthesis of Allylic Alcohols with cis-Configurated Double Bond

A new high yielding coupling reaction of C-2 monosubstituted 5,6-dihydro-1,4-dithiins with aldehydes is reported. In this way allylic alcohols having the cis-substituted double bond tied up by a sulfur-containing ring can be readily prepared. Subsequent stereoselective sulfur removal then affords allylic alcohols with cis-configurated double bond.     

Diastereoselective chelation-controlled additions to β-silyloxy aldehydes

A general diastereoselective method for the addition of dialkylzincs and (E)-di- and (E)-trisubstituted vinylzinc reagents to β-silyloxy aldehydes is presented. This method employs alkyl zinc triflate and nonaflate Lewis acids and affords chelation-controlled products (6:1 to > 20:1 dr).     

A highly stereoselective, modular route to (E)-vinylsulfones and to (Z)- and (E)-alkenes

A recently discovered radical fragmentation of 2-fluoro-6-pyridinoxy derivatives allows a new highly stereoselective and convergent route to (E)-vinylsulfones from allylic alcohols. Reductive desulfonylation or nickel-catalyzed couplings furnish di- and trisubstituted (E)- and (Z)-alkenes.     

Enantioselective addition of vinylzinc reagents to aldehydes catalyzed by modular ligands derived from amino acids

[reaction: see text] A series of N-acylethylenediamine-based ligands were synthesized from Boc-protected amino acids. The ligands were screened for the ability to catalyze the asymmetric addition of vinylzinc reagents to aldehydes. Three sites of diversity on the ligands were optimized for this reaction using a positional scanning approach. The optimized ligand 3d was found to catalyze the formation of 15 different (E)-allylic alcohols with enantioselectivities that ranged from 52 to 91% ee and yields that ranged from 40 to 90%. This ligand was especially effective for the reaction of aromatic aldehydes with vinylzinc reagents derived from bulky terminal alkynes. Ligand 3d catalyzed the addition of (E)-(3,3-dimethylbut-1-enyl)(ethyl)zinc to 2-naphthaldehyde to give (R,E)-4,4-dimethyl-1-(naphthalene-1-yl)pent-2-en-1-ol in 89% ee. The ee of this product could be increased to 97% through a single recrystallization.     

Deacylative allylation: allylic alkylation via retro-Claisen activation

A new method for allylic alkylation of a variety of relatively nonstabilized carbon nucleophiles is described herein. In this process of "deacylative allylation", the coupling partners, an allylic alcohol and a ketone pronucleophile, undergo in situ retro-Claisen activation to generate an allylic acetate and a carbanion. In the presence of palladium, these reactive intermediates undergo catalytic coupling to form a new C-C bond. In comparison to unimolecular decarboxylative allylation, a commonly utilized method for allylation of carbon anions, deacylative allylation is an intermolecular process. Moreover, deacylative allylation allows the direct coupling of readily available allylic alcohols. Lastly, the full utility of deacylative allylation is demonstrated by the rapid construction of a variety 1,6-heptadienes via 3-component couplings.