A new selective method for dimethylamine in water analysis by liquid chromatography using solid-phase microextraction and two-stage derivatization with o-phthalaldialdehyde and 9-fluorenylmethyl chloroformate

A new method is presented for the determination of DMA in water as its 9-fluorenylmethyl chloroformate (FMOC) derivative using solid-phase microextraction (SPME) and liquid chromatography. The method is based on the employment of SPME fibres coated with carbowax-templated resin (CW-TR) for analyte extraction and derivatization. The fibres were successively immersed in the samples, in a solution of o-phthalaldialdehyde and N-acethyl-l-cysteine (OPA–NAC) and finally, in a solution of FMOC. OPA–NAC reacted on the fibre with possible primary aliphatic amines present in the samples, particularly with PA which is a direct interferent in the determination of DMA with FMOC. In such a way, the formation of PA–FMOC during the second stage was prevented, and thus the method was selective for DMA. The proposed procedure was applied to the determination of DMA in the 1.0–10.0 μg/mL range. The method provided suitable linearity, accuracy and reproducibility, and limits of detection and quantification of 0.3 and 1.0 μg/mL, respectively. The applicability of the method for the determination of DMA in different types of water is shown.     

An evaluation of solid phase microextraction for aliphatic amines using derivatization with 9-fluorenylmethyl chloroformate and liquid chromatography

The reliability of SPME combined with a chemical reaction for the analysis of short-chain aliphatic amines by liquid chromatography has been investigated. Different options to couple SPME and derivatization have been tested and compared: (i) derivatization of the analytes in solution followed by the extraction of the derivatives, (ii) extraction of the analytes and subsequent derivatization by immersing the SPME fibre onto a solution of the reagent, and (iii) extraction/derivatization of the analytes using fibres previously coated with the reagent. Methylamine (MA), dimethylamine (DMA) and trimethylamine (TMA) have been selected as a model of primary, secondary and tertiary amines, respectively. The analytes have been derivatized with the fluorogenic reagent 9-fluorenylmethyl chloroformate (FMOC), and the fibre coating was Carbowax-templated resin (CW-TR). The employment of fibres coated with FMOC to extract and derivatize the analytes was the best option, as compared with the other approaches tested the sensitivity was considerably improved. On the basis of these studies, a new procedure for the determination of MA, DMA and TMA in water is presented. To demonstrate the utility of the proposed conditions data on linearity, accuracy, repeatability and sensitivity are given. Results of the determination of the amines in tap, river and waste water are also presented.     

High-performance liquid chromatographic determination of memantine hydrochloride in rat plasma using sensitive fluorometric derivatization

In this study, we investigated a simple, sensitive and reliable liquid chromatography‐fluorescence detection method for the determination of memantine hydrochloride in rat plasma which was based on derivatization with 9‐fluorenylmethyl chloroformate (FMOC‐Cl). For the first time, FMOC‐Cl was introduced into derivatization of memantine hydrochloride in rat plasma. The amino groups of memantine hydrochloride and amantadine hydrochloride (internal standard) were trapped with FMOC‐Cl to form memantine hydrochloride‐FMOC‐Cl and amantadine hydrochloride‐FMOC‐Cl compositions, which can be very compatible for LC‐FLD. Precipitation of plasma proteins by acetonitrile was followed by vortex mixing and centrifugation. Chromatographic separation was performed on a C₁₈ column (DIAMONSIL 150×4.6 mm, id 5 μm) with a mobile phase consisting of acetonitrile and water at a flow rate of 1.0 mL/min. The retention times of memantine hydrochloride‐FMOC‐Cl and amantadine hydrochloride‐FMOC‐Cl compositions were 23.69 and 40.27 min, respectively. Optimal conditions for the derivatization of memantine hydrochloride were also described. The limit of quantification (LOQ) was 25 ng/mL for memantine hydrochloride in plasma, the linear range was 0.025–5.0 μg/mL in plasma with a correlation coefficient (r) of 0.9999. The relative standard deviations (RSDs) of intra‐day and inter‐day assays were 4.46–12.19 and 5.23–11.50%, respectively. The validated method was successfully applied to the determination of memantine hydrochloride in rat plasma samples.     

Derivatization of tertiary amphetamines with 9-fluorenylmethyl chloroformate for liquid chromatography: determination of N-methylephedrine

The fluorogenic reagent 9-fluorenylmethyl chloroformate (FMOC) was evaluated for the derivatization of tertiary amphetamines prior to liquid chromatographic analysis. Conditions for the derivatization were investigated, including the reaction time, the derivatization reagent concentration and the pH, using N-methylephedrine as a model compound. On the basis of these studies, a method for the quantification of N-methylephedrine is presented. The method involves derivatization with FMOC at ambient temperature and separation of the derivatives formed on a LiChrospher C18, 5 microns, 125 x 4 mm id column using acetonitrile-water gradient elution. The proposed procedure shows good linearity, accuracy and reproducibility in the 1.0-25.0 micrograms mL-1 concentration range. The limit of detection was 0.1 microgram mL-1 and the limit of quantification was 0.5 microgram mL-1. The utility of the assay was demonstrated by determining N-methylephedrine in water and urine samples.     

On-line analysis of carbonyl compounds with derivatization in aqueous extracts of atmospheric particulate PM10 by in-tube solid-phase microextraction coupled to capillary liquid chromatography

A new device for carbonyl compounds based on coupling on-line and miniaturizing both, sample pretreatment and chromatographic separation, is reported. Two capillary columns, a GC capillary column (95% methyl-5% phenyl substituted backbone, 70 cm × 0.32 mm i.d., 3 μm film thickness) in the injection valve for in-tube solid-phase microextraction (IT-SPME) and a Zorbax SB C18 (150 mm × 0.5 mm i.d., 5 μm particle diameter) LC capillary column were employed. Different combinations of IT-SPME and derivatization using 2,4-dinitrophenylhydrazine (DNPH) were examined for mixtures containing 15 carbonyl compounds (aliphatic, aromatic and unsaturated aldehydes and ketones). A screening analysis of aqueous extracts of atmospheric particulate PM(10) was carried out. Moreover, the possibility of coupling IT-SPME and conventional liquid chromatography is also tested. Derivatization solution and IT-SPME coupled to capillary liquid chromatography provided the best results for achieving the highest sensitivity for carbonyl compounds in atmospheric particulate analysis. Detection limits (LODs) using a photodiode array detector (DAD) were ranged from 30 to 198 ng L(-1), improving markedly those LODs reported by conventional SPME-LC-DAD.     

Gas chromatography/trace analysis of derivatized azelaic acid as a stability marker

Azelaic acid, a naturally occurring saturated dicarboxylic acid, is found in many topical formulations for its various medical benefits or as a byproduct of the oxidative decomposition of unsaturated fatty acids. The poor volatility of azelaic acid hinders its applicability in GC analysis. Therefore, azelaic acid was derivatized by methylation and silylation procedures to enhance its volatility for GC analysis. Accordingly, dimethyl azelate (DMA) and di(trimethylsilyl) azelate were synthesized and characterized by GC–MS. Subsequently, a GC with flame ionization detection method was developed and validated to analyze trace amounts of azelaic acid in some marketed skin creams. Unlike DMA, di(trimethylsilyl) azelate was chemically unstable and degraded within few hours. Nonane was used as a stable internal standard. Variability due to derivatization and extraction was controlled by a standard addition procedure. DMA analysis was linear in a wide concentration range (100 ng/mL to 100 mg/mL). Moreover, the method was accurate (96.4–103.4%) and precise with inter‐ and intraday variability <2.0% and LOQ and LOD of 100 and 10 ng/mL, respectively.     

Sensitive determination of methylenedioxylated amphetamines by liquid chromatography

Different strategies for the liquid chromatographic determination of methylenedioxylated amphetamines were evaluated: separation and detection of underivatized analytes by (i) UV or (ii) fluorescence, (iii) derivatization with 3,5-dinitrobenzoyl chloride followed by separation and UV detection of the derivatives formed and (iv) derivatization with 9-fluorenylmethyl chloroformate (FMOC) and subsequent separation and fluorimetric detection of the derivatives. The compounds tested were 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxymethamphetamine (MDMA) and 3,4-methylenedioxyethylamphetamine (MDE). On the basis of these studies, a new procedure for the chromatographic determination of MDA, MDMA and MDE is proposed, based on derivatization with FMOC. The described procedure allows the quantification of the tested compounds with adequate linearity, reproducibility and accuracy in the concentration interval 0.5-20.0 micrograms mL-1. The limits of detection were 0.01 microgram mL-1 for MDA and 0.025 microgram mL-1 for MDMA and MDE. The utility of the described assay was tested by determining methylenedioxylated amphetamines in plasma and urine.     

Fast Analysis of Free Amino Acids in Tobacco by HPLC with Fluorescence Detection and Automated Derivatization

A fast, simple, and sensitive HPLC method for the determination of free amino acids in tobacco was described. A fully automated sample processor performed precolumn derivatization of both primary and secondary amino acids with o‐phthalaldehyde/3‐mercaptopropionic acid and 9‐fluorenylmethyl chloroformate (FMOC‐Cl), respectively. All reactions were fully automated by means of an injector programme and accomplished in 10 min. Sample preparation consisted of a single step of extraction with 0.1 mol/L HCl at ambient temperature (assisted by sonication) in 30 min, followed by filtration of an aliquot and derivatization. By optimization of sample preparation and HPLC conditions, separation of 20 amino acids in 30 min was achieved. Detection limits ranged from 0.50 to 1.40 μg/g; coefficients of variation ranged from 1.8% to 3.9%; recoveries ranged from 84.6% to 108.5%. The method was applied to the analysis of amino acids contents of tobacco leaves in different varieties and flue‐curing period.     

Analysis of methylamine by solid-phase microextraction and HPLC after on-fibre derivatization with 9-fluorenylmethyl chloroformate

A method for the determination of methylamine (MA) in aqueous matrices is reported which uses solid-phase microextraction (SPME) for enrichment and derivatization of the analyte, and high performance liquid chromatography (HPLC). The fluorogenic reagent 9-fluorenylmethyl chloroformate (FMOC) has been used for derivatization. The SPME fibres were successively immersed in the samples and in the derivatization solutions to extract MA and FMOC, respectively. After a defined time of reaction, the derivatized analyte was desorbed into the chromatographic system, and chromatographed in a LiChrosphere 100 RP18, i.d., 5 μm, column under gradient elution. In order to improve the MA-FMOC peak profile, a precolumn ( i.d., packed with Hypersil C₁₈ phase, 30 μm) was connected on-line to the analytical column by means of a switching valve. The experimental conditions (including fibre coating, times of adsorption, reaction and desorption, and concentration of reagent) have been optimised, and the results have been compared with those achieved by using a method previously validated for aliphatic amines in which extraction and derivatization were carried into C₁₈ solid-phase extraction (SPE) cartridges. Although less sensitive, the SPME based method allowed the quantification of MA over the range 2.5-10.0 μg/ml with linearity, reproducibility and accuracy comparable to that of the SPE based method, the limit of detection being 0.75 μg/ml. The main advantages of the proposed SPME procedure are: sample handling involved in the extraction and derivatization steps was considerably reduced, it was free organic solvent and non-destructive. Moreover, the proposed conditions allowed the selective determination of MA in the presence of other primary and secondary short-chain aliphatic amines. The utility of the proposed procedure for the quantification of MA in different types of waters is discussed.     

Single-step analysis of low abundance phosphoamino acids via on-line sample preconcentration with chemical derivatization by capillary electrophoresis

New strategies for rapid, sensitive and high-throughput analysis of low abundance metabolites in biological samples are required for future metabolomic research. In this report, a direct method for sub-micromolar analyses of phosphoamino acids was developed using on-line sample preconcentration with 9-fluorenylmethyloxycarbonyl chloride (FMOC) derivatization by capillary electrophoresis (CE) and UV detection. Analyte focusing by dynamic pH junction and FMOC labeling efficiency were influenced by several experimental factors including buffer pH, ionic strength, sample injection length and FMOC concentration. About a 200-fold enhancement in concentration sensitivity was achieved under optimal conditions relative to conventional off-line derivatization, as reflected by a detection limit (S/N approximately 3) of 0.1 microM. In-capillary sample preconcentration with chemical labeling by CE offers a unique single-step analytical platform for high-throughput screening of low abundance metabolites without intrinsic chromophores.     

Liquid chromatographic determination of aliphatic amines in water using solid support assisted derivatization with 9-fluorenylmethyl chloroformate

Summary A simple and sensitive method has been developed for the liquid chromatographic determination of short-chain aliphatic amines in water. Analytes are retained in solid-phase extraction (SPE) cartridges, and then derivatized by drawing an aliquot of the fluorogeneic reagent 9-fluorenylmethyl chloroformate (FMOC) through the cartridges. After a certain reaction time the derivatives formed are desorbed with acetonitrile. The collected extracts are then chromatographed on a LiChrospher 100 RP₁₈ 125 mm×4 mm i.d., 5 μm, column using an acetonitrile-water gradient. The influence of experimental conditions (SPE material, volume of sample, concentration of FMOC, time of reaction and pH) has been investigated. Optimal results have been obtained with C₁₈ SPE cartridges using a sample volume of 5.0 mL. For derivatization, 0.25 mL aliquots of 25 mM FMOC have been used, the reaction time being only 2 min. The method has been applied to the quantification of several aliphatic amines: methylamine, ethylamine, dimethylamine,n-butylamine,n-pentylamine andn-hexylamine. Under the proposed conditions the percentages of analytes retained plus derivatized were of about 54–107% compared to those obtained with direct solution derivatization. The method provided good reproducibility, linearity and accuracy within the 0.050–1.0 mg L⁻¹ concentration range. The limits of detection were in the 0.25–5.0 μg L⁻¹ range. The utility of the described approach has been tested by analysing tap water, river water and industrial waste water.     

In-tube solid-phase microextraction coupled by in valve mode to capillary LC-DAD: Improving detectability to multiresidue organic pollutants analysis in several whole waters

A simple and fast capillary chromatographic method has been developed to identify and quantify organic pollutants at sub-ppb levels in real water samples. The major groups of pesticides (organic halogens, organic phosphorous, and organic nitrogen compounds), some hydrocarbons (polycyclic aromatic hydrocarbons), phthalates and some phenols such as phenol and bisphenol A (endocrine disruptors) were included in this study. The procedure was based on coupling, in-tube solid-phase microextraction (IT-SPME) by using a conventional GC capillary column (95% methyl–5% phenyl substituted backbone, 80 cm × 0.32 mm i.d., 3 μm film thickness) in the injection valve to capillary liquid chromatography with diode array detection. A comparative study between the IT-SPME manifold and a column-switching device using a C₁₈ column (35 mm × 0.5 mm i.d., 5 μm particle size) has been performed. The IT-SPME procedure was optimal, it allows reaching limits of detection (LODs) between 0.008 and 0.2 μg/L. No matrix effect was found and recoveries between 70 and 116% were obtained. The precision of the method was good, and the achieved intra- and inter-day variation coefficients were between 2 and 30%. This procedure has been applied to the screening analysis of 28 compounds in whole waters from several points of the Mediterranean coast (Valencia Community, Spain).     

Highly sensitive determination and validation of gabapentin in pharmaceutical preparations by HPLC with 4-fluoro-7-nitrobenzofurazan derivatization and fluorescence detection

A sensitive HPLC method with pre-column fluorescence derivatization using 4-Fluoro-7-Nitrobenzofurazan (NBD-F) has been developed for the determination of gabapentin in pharmaceutical preparations. The method is based on the derivatization of gabapentin with (NBD-F) in borate buffer of pH 9.5 to yield a yellow, fluorescent product. The HPLC separation was achieved on a Inertsil C(18) column (250 mm × 4.6 mm) using a mobile phase of methanol water (80:20, v/v) solvent system at 1.2 mL/min flow rate. Mexiletine was used as the internal standard. The fluorometric detector was operated at 458 nm (excitation) and 521 nm (emission). The assay was linear over the concentration range of 5 50 ng/mL. The method was validated for specificity, linearity, limit of detection, limit of quantification, precision, accuracy, robustness. Moreover, the method was found to be sensitive with a low limit of detection (0.85 ng/mL) and limit of quantitation (2.55 ng/mL). The results of the developed procedure for gabapentin content in capsules were compared with those by the official method (USP 32). Statistical analysis by t- and F-tests, showed no significant difference at 95 confidence level between the two proposed methods.     

Automated derivatization and analysis of malondialdehyde using column switching sample preparation HPLC with fluorescence detection

Analyte derivatization is advantageous for the analysis of malondialdehyde (MDA) as a biomarker of oxidative stress in biological samples. Conventionally, however, derivatization is time consuming, error-prone and has limited options for automation. We have addressed these challenges for the solid phase analytical derivatization of MDA from small volume tissue homogenate samples. A manual derivatization method was first developed using Amberlite XAD-2 (12 mg) as the solid phase. Subsequently an automated column switching process was developed that provided simultaneous derivatization and extraction of the MDA-DH hydrazone product on a cartridge packed with XAD-2, followed by quantitative elution of the product to an analytical LC column (Waters NovoPak C18, 3.9 x 150 mm). The LOD was 0.02 microg/mL and recovery was quantitative. The method was linear (r(2) >0.999) with precision < 5% from the LOQ (0.06 microg/mL) to at least 35 microg/mL. The method was successfully applied to the analysis of small volume (30 microL) mouse tissue homogenate samples. Endogenous levels of MDA in the tissues ranged from 20 to 40 nmol/g tissue (ca. 0.1-0.2 microg/mL homogenate). Compared to conventional MDA analyses, the current method has advantages in automation, selectivity, precision and sensitivity for analysis from very small sample volumes.     

氨基酸和多肽在碱性硅胶载体上的固相衍生研究

为进行复杂体系中痕量生理活性物质 (如氨基酸和多肽等 )的高灵敏度分析 ,往往需要对其进行柱前或柱后的荧光衍生 -高效液相色谱或毛细管电泳分析 [1] .在一个存在着竞争反应的体系中 ,为保证样品有足够的反应产率 ,往往需使衍生试剂过量很多 ,这就使得衍生后的样品中必然含有高浓度的衍生试剂及其水解后形成的副产物 ,从而大大地干扰了分离与分析 .为解决这一问题 ,通常可采取溶剂萃取[2～ 5] 或加入 1 -金刚烷胺 [6 ,7] 或羟胺 [8,9] 等方法除去过量试剂 .但这些额外的处理使衍生方法更加烦琐 ,有时还导致收率的降低 .也有使用固相化的衍…     

Fully automated determination of amphetamines and synthetic designer drugs in hair samples using headspace solid-phase microextraction and gas chromatography-mass spectrometry

This study describes a fully automated procedure using alkaline hydrolysis and headspace (HS) solid-phase microextraction (SPME) followed by on-fiber derivatization and gas chromatographic (GC)-mass spectrometric (MS) detection of amphetamine, methamphetamine, methylendioxyamphetamine, methylendioxymethamphetamine, methylendioxyethylamphetamine, methylendioxyphenylbutanamine, and methylmethylendioxyphenylbutanamine in human hair samples. Ten milligrams of hair is washed with deionized water, petroleum ether, and dichloromethane. After the addition of deuterated internal standards the sample is hydrolyzed with sodium hydroxide and directly submitted to HS-SPME. After the absorption of analytes for an on-fiber derivatization procedure the fiber is directly placed into the HS of a second vial containing N-methyl-bis(trifluoroacetamide) before GC-MS analysis. The limits of detection are determined between 0.01 and 0.17 ng/mg. Absolute analyte recoveries are in the range between 0.3% and 7.5%. Linearity is proven over a range from 0.1 to 50 ng/mg with coefficients of correlation from 0.998 to 1. In comparison with conventional methods of hair analysis, this fully automated HS-SPME-GC-MS procedure is substantially faster and easier to perform without using solvents. It uses minimal sample amounts and has the same degree of sensitivity and reproducibility.     

In-capillary derivatization and laser-induced fluorescence detection for the analysis of organophosphorus pesticides by micellar electrokinetic chromatography

We developed a rapid and sensitive method using in-capillary derivatization and laser-induced fluorescence (LIF) detection for the fully automated analysis of organophosphorus pesticides (OPPs), including glufosinate, aminomethylphosphonic acid (AMPA) and glyphosate by micellar electrokinetic chromatography (MEKC). The potential of 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) as in-capillary derivatization reagent is described for the first time. The unique feature of this MEKC method is the capillary being used as a small reaction chamber. In in-capillary derivatization, the sample and reagent solutions were injected directly into the capillary by tandem mode, followed by an electrokinetic step to enhance the mixing efficiency of analytes and reagent plugs in accordance with their different electrophoretic mobilities. Standing a specified time for reaction, the derivatives were then immediately separated and determined. Careful optimization of the derivatization and separation conditions allowed the determination of glufosinate, AMPA and glyphosate with detection limits of 2.8, 3.6 and 32.2 ng/mL, respectively. These detection limits were comparable to those of 1.4, 1.9 and 23.8 ng/mL obtained from conventional pre-capillary derivatization. Furthermore, repeatability better than 0.40% for migration time and 3.4% for peak area, as well as shorter migration time, was obtained. The method was successfully applied to the analysis of spiked river water sample with satisfactory results.     

Liquid chromatographic determination of trimethylamine in water

A method for the selective determination of trimethylamine (TMA) in aqueous matrices by liquid chromatography is reported. The proposed procedure is based on the derivatization of the analyte with 9-fluorenylmethyl chloroformate (FMOC) in a precolumn (Hypersil C18, 30 microm, 20 mm x 2.1 mm i.d.) connected on-line to the analytical column (LiChrosphere 100 RP18, 5 microm, 125 mm x 4 mm i.d.). Gradient elution was performed with a mixture of acetonitrile-water-0.05 M borate buffer (pH 9.0). The method has been applied to the direct determination of TMA in water within the 0.25-10.0 microg/ml concentration interval, and can also be adapted to the determination of TMA over the range 0.05-1.0 microg/ml by incorporating a preconcentration stage with C18 solid-phase extraction (SPE) cartridges. Good linearity, reproducibility and accuracy was achieved within the tested concentration intervals. The limits of detection at 262 nm were 50 and 5 ng/ml for the direct method and for the method involving preconcentration, respectively. The proposed conditions allowed the selective determination of TMA in the presence of other primary and secondary short-chain aliphatic amines. The utility of the described procedure has been tested by determining TMA in different water samples.     

Combined solid-phase extraction and gas chromatography-mass spectrometry used for determination of chloropropanols in water

A sensitive and rapid derivatization method for the simultaneous determination of 1,3-dichloro-2-propanol (1,3-DCP) and 3-chloropropane-1,2-diol (3-MCPD) in water samples has been developed. The aim was to research the optimal conditions of the derivatization process for two selected reagents. A central composite design was used to determine the influence of derivatization time, derivatization temperature and reagent volume. A global desirability function was applied for multi-response optimization. The analysis was performed by gas chromatography-mass spectrometry. During the optimization of the extraction procedure, four different types of solid-phase extraction (SPE) columns were tested. It was demonstrated that the Oasis HLB cartridge produced the best recoveries of the target analytes. The pH value and the salinity were investigated using a Doehlert design. The best results for the SPE of both analytes were obtained with 1.5 g of NaCl and pH 6. The proposed method provides high sensitivity, good linearity (R(2)≥0.999) and repeatability (relative standard deviations % between 2.9 and 3.4%). Limits of detection and quantification were in the range of 1.4-11.2 ng/mL and 4.8-34.5 ng/mL, respectively. Recoveries obtained for water samples were ca. 100% for 1,3-DCP and 3-MCPD. The method has been successfully applied to the analysis of different samples including commercially bottled water, an influent and effluent sewage.     

Derivatization of Aminophosphonic Acids for HPLC Analysis

Abstract

A general method for the derivatization of alpha-aminophosphonic acids for HPLC analysis is described. The method involves the conversion of the amino functionality to the corresponding 9-fluorenylmethoxycarbonyl (FMOC) urethane followed by esterification of the phosphonic acid moiety utilizing triethyl orthoformate. The sensitivity is compared to that achievable with a previously described N-trifluoroacetyl diethyl ester procedure on the basis of UV detection. Derivative separation using fluorescence detection is also shown.