分子印迹固相萃取/高效液相色谱法检测黄瓜中灭蝇胺

以灭蝇胺为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,甲苯和异辛烷为二元致孔剂,采用低温光引发、本体聚合法制备了灭蝇胺的分子印迹聚合物.通过平衡吸附实验、扫描电镜、红外光谱以及压汞仪等多种手段对制备的印迹和非印迹聚合物进行了测定与表征,结果表明所制备的印迹聚合物对模板分子具有明显的特异性吸附作用.Scatchard分析证明灭蝇胺分子印迹聚合物对灭蝇胺分子的吸附存在两类不同结合位点,最大表观结合量(Qmax)和平衡解离常数(Kd)分别为Qmax1=1.19μmol/g,Kd1=1.31 μmol/L;Qmax2 =2.46 μmol/g,Kd2=4.84 μmol/L.用该聚合物制备的灭蝇胺分子印迹固相萃取柱处理样品,结合高效液相色谱法可快速有效地检测黄瓜样品中的灭蝇胺,线性范围为0.1～10 mg/L(r =0.9991),检出限(S/N=3)为0.05 mg/L.该方法快速简便,效果优于商品化的固相萃取柱.     

分子印迹固相萃取-高效液相色谱法测定饲料中莱克多巴胺

以莱克多巴胺为模板分子,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了对莱克多巴胺具有高选择性的分子印迹聚合物。考察了甲醇、乙腈、丙酮和氯仿-甲醇与三乙胺构成致孔剂合成的聚合物性能及其形貌特征。通过正交试验优化的聚合反应配方为: 1.0 mmol莱克多巴胺,4.0 mmol丙烯酰胺,20.0 mmol乙二醇二甲基丙烯酸酯,6.0 mL乙腈-三乙胺(30:1, v/v), 50.0 mg偶氮二异丁腈。建立的基于分子印迹固相萃取-高效液相色谱测定饲料试样中莱克多巴胺的方法,在0.50～100 mg/L质量浓度范围内有良好的线性关系(r=0.9994);饲料试样中1.0、10及100 mg/kg 3个添加水平的莱克多巴胺平均回收率大于80%;批内、批间测定的相对标准偏差小于10%;检出限(信噪比为3)达到0.1 mg/kg。该方法灵敏、可靠,用于饲料等复杂基质中莱克多巴胺检测的效果优于相关标准分析方法。     

分子印迹固相萃取-高效液相色谱法测定猪肉中红霉素残留

采用沉淀聚合法,以红霉素（erythromycin,ERY）为模板,甲基丙烯酸（methacrylic acid,MAA）为功能单体,乙二醇二甲基丙烯酸酯（ethyleneglycoldimethacrylate,EGDMA）为交联剂,甲醇/乙腈（1:4,v/v）为致孔剂制备了ERY分子印迹聚合物（molecularly imprinted polymers,MIPs）。通过扫描电镜、平衡吸附实验等对制备的印迹和非印迹聚合物进行表征和测定,结果表明所制备的MIPs对ERY具有特异性吸附作用。Scatchard分析证明MIPs对ERY的吸附存在两类不同结合位点,最大表观结合量（Q_max）和平衡解离常数（K_d）分别为Q_max1=45.24 mg/g,K_d1=0.028 g/L; Q_max2=87.53 mg/g,K_d2=0.20 g/L。以制备的MIPs为吸附剂的分子印迹固相萃取柱,结合高效液相色谱法能够快速检测猪肉样品中的ERY残留,线性范围为0.5~50 mg/L（r²=0.9994）,检出限（S/N=3）为0.2 mg/kg。猪肉样品中不同添加水平下ERY的加标回收率为95.2%~104.2%,相对标准偏差（RSD）小于5%。该方法选择性好,灵敏、可靠,可用于猪肉等复杂食品样本中ERY残留的检测。     

分子印迹固相萃取-高效液相色谱法测定饲料中磺胺类药物

建立了基于分子印迹聚合物(MIPs)为吸附剂的固相萃取技术结合高效液相色谱检测饲料中5种磺胺类药物(SAs)的方法。以磺胺嘧啶为模板,采用紫外光引发合成MIPs,以MIPs作为吸附剂制备固相萃取柱,并对上柱、淋洗和洗脱等萃取条件进行了优化。在优化的条件下,5种SAs的检出限为0.14～0.23 mg/kg;定量限为0.38～0.47 mg/kg;平均回收率在72.1%～89.3%之间;批内与批间相对标准偏差分别小于7.9%和9.2%。与碱性氧化铝柱净化相比,分子印迹固相萃取柱净化后杂质更少,选择性更好,方法的定量限更低。     

分子印迹磁性固相萃取/液相色谱法检测奶制品中的双酚A

以双酚A(BPA)为模板分子,磁性二氧化硅(Fe_3O_4@SiO_2)为载体,4-乙烯基吡啶(4-VP)为功能单体,采用表面分子印迹技术制备了双酚A磁性分子印迹聚合物微球(Fe_3O_4@SiO_2-MIPs)。通过红外光谱、透射电镜等对Fe_3O_4@SiO_2-MIPs进行了结构和形貌的表征。将制得的Fe_3O_4@SiO_2-MIPs作为磁性吸附剂,分离富集奶制品中的BPA,建立了分子印迹磁性固相萃取/液相色谱法测定奶制品中BPA的新方法。结果表明,在优化条件下,Fe_3O_4@SiO_2-MIPs对BPA具有良好的选择性,最大吸附容量达13.50 mg/g,在0.05~5.0 mmol/L浓度范围内有良好的线性关系(r2=0.993 4),方法检出限为0.037μg/L,样品加标回收率为86.2%~93.1%,相对标准偏差为2.9%~3.8%。该方法高效快速,选择性好,可用于牛奶样品中痕量BPA的检测。     

马拉硫磷分子印迹聚合物的制备及其在固相萃取中的应用

以马拉硫磷为模板分子,采用原位逐步聚合法制备了具有良好识别性能的分子印迹聚合物(MIPs),考察了马拉硫磷、甲基对硫磷、对硫磷及甲胺磷在马拉硫磷聚合物的选择性分离富集特性。用聚合物固相萃取了蜂蜜、蔬菜和天然水中的马拉硫磷。结果表明,聚合物对模板分子产生了印迹效应,对马拉硫磷有明显的选择性。流速为1.0 mL/min,进...     

分子印迹-固相萃取-高效液相色谱法测定鱼肉中的孔雀石绿

以本体聚合法制备孔雀石绿(MG)分子印迹聚合物,并以此为填料,制作针对孔雀石绿的分子印迹固相萃取小柱。鱼肉样品经乙腈超声提取,提取液过分子印迹固相萃取小柱,用甲醇-乙酸(9+1)混合液洗脱,洗脱液采用Eclipse Plus C18色谱柱分离,以50mmol·L-1乙酸盐缓冲溶液-乙腈(4+6)混合液为流动相进行洗脱,检测波长为620nm。孔雀石绿的线性范围为1.00~50.0μg·L-1,检出限(3S/N)为0.62μg·kg-1。对空白鱼肉样品进行加标回收试验,回收率在86.6%~95.4%之间,测定值的相对标准偏差(n=5)在3.6%~6.8%之间。     

分子印迹固相萃取/高效液相色谱法测定猪肝中盐酸克伦特罗的方法研究

建立了分子印迹固相萃取/高效液相色谱法测定猪肝中盐酸克伦特罗残留量的方法。以ASB C18色谱柱(250 mm×4.60 mm,5μm)分离,流动相为甲醇-水(45∶55,p H 3.0),紫外检测波长243 nm,进样量10μL,流速0.6 m L/min,柱温30℃。分子印迹固相萃取条件为:上样溶剂为双蒸水,上样流速为0.6 m L/min;洗脱剂为1%三氟乙酸的甲醇溶液。上述优化条件下,该方法在0.432~4.32μg/m L范围内线性关系良好,相关系数(r)为0.999 0。加标回收率为84.7%~92.0%,相对标准偏差(RSD)为1.5%~1.8%。方法的准确度和精密度满足残留分析的要求。     

分子印迹固相萃取-高效液相色谱法同时检测烟叶中磺酰脲类农药残留

以氯磺隆（CS）为模板分子,甲基丙烯酸为功能单体,三羟甲基丙烷三甲基丙烯酸酯为交联剂,在二氯甲烷氛围中,经沉淀聚合制备氯磺隆分子印迹聚合物（CS-MIP）微球。将该聚合物微球作为填料制得分子印迹固相萃取柱用于样品前处理,建立了分子印迹固相萃取-高效液相色谱（MIP-SPE-HPLC）同时检测烟叶中6种磺酰脲类除草剂残留的分析方法。针对氯磺隆、甲磺隆、苄嘧磺隆、苯磺隆、胺苯磺隆和烟嘧磺隆6种磺酰脲类除草剂,在烟叶中加标0.50~50 μg/g,经氯磺隆分子印迹固相萃取柱（CS-MIP-SPE）净化和富集,高效液相色谱（HPLC）检测,其平均回收率为77.60%~102.05%,相对标准偏差为0.16%~7.07%,检出限为0.08~0.46 μg/g。将MIP-SPE-HPLC方法用于实际农药残留检测,结果表明可同时满足烟叶中多种磺酰脲类除草剂残留量的检测要求。     

分子印迹固相萃取/高效液相色谱法分离和富集枳实中4种黄烷酮

采用沉淀聚合法以橙皮素为模板分子,2-乙烯基吡啶为功能单体,二甲基丙烯酸乙二醇酯为交联剂,合成了橙皮素分子印迹聚合物。利用紫外光谱法确定了最佳功能单体与配比,优化了合成条件。采用傅立叶变换红外光谱、扫描电子显微镜、静态吸附对聚合物进行表征。实验结果表明,分子印迹聚合物的吸附性能明显优于空白印迹聚合物,且此聚合物对柚皮苷、橙皮苷、柚皮素和橙皮素的相对选择系数分别为1.40,1.39,1.59和2.89,表明该分子印迹聚合物对4种黄烷酮有较好的选择性。将印迹聚合物作为固相萃取填料,对枳实提取液进行分离和富集,结果表明上述4种黄烷酮的提取率分别为72.6%,61.1%,95.4%和93.5%,分离富集效果良好,大大提高了枳实中4种黄烷酮的提取效率。     

Determination of Tetracyclines by Solid-Phase Extraction with a Molecularly Imprinted Polymer and High-Performance Liquid Chromatography

Tetracyclines are widely used antibiotics classified as emerging pollutants and may lead to an increase in bacterial resistance in the environment. In order to determine these compounds at low concentrations, a water-compatible molecularly imprinted polymer was developed for solid-phase extraction followed by high-performance liquid chromatography analysis. The monomers 2-hydroxyethyl methacrylate and glycerol dimethacrylate were added 1 h after the start of the synthesis to provide hydroxyl groups on the polymer surface. This hydrophilic layer established hydrogen bonds with water, minimizing interferences of this solvent in the analyte-polymer complex, increasing analyte adsorption. The polymer was then used for solid-phase extraction to preconcentrate the tetracyclines. The method provided low limits of quantification (5 µg L^?1), good linearity, precision, and accuracy for tetracyclines, with preconcentration factors of 14, 19, 29, and 41 for oxytetracycline, tetracycline, chlortetracycline, and doxycycline, respectively.     

甲醛分子印迹聚合物的制备、性能及水产品测定

以甲醛为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,用氯仿做溶剂,制备了甲醛分子印迹聚合物,并优化了此制备方法,在模板分子、功能单体和交联剂的摩尔比为1:2:20,预聚合时间为4 h,聚合时间为8 h的条件下制备的聚合物对甲醛的特异性吸附能力最好,当甲醛溶液的浓度为2 mmol/L时聚合物对甲醛的吸附量达到了12.40×10^-2 mmol/g。 对市售鱿鱼处理后用高效液相色谱法测定得样品中甲醛的浓度是5.92 mg/Kg,将该样稀释100倍以后甲醛已无法检出,经MIP柱富集后检测计算样品中甲醛浓度为5.76 mg/Kg,表明该聚合物用于样品前处理高效且结果无显著性差异。     

模板分子印迹聚合物磁性固相萃取-高效液相色谱法测定环境水样中四环素类抗生素

以介孔硅磁性氧化石墨烯为载体,四环素、土霉素、金霉素、强力霉素共同作为模板,N-［3-(三甲氧基甲硅烷基)丙基］乙二胺(KH-792)和苯胺甲基三乙氧基硅烷(KH-42)为功能单体,通过溶胶-凝胶法制备了四环素类抗生素多模板分子印迹聚合物。以扫描电镜(SEM)、红外光谱(IR)及振动样品磁强计(VSM)对聚合物进行表征。将所制备的多模板分子印迹聚合物作为吸附剂应用于磁性固相萃取,结合高效液相色谱法,建立了水样中四环素、土霉素、金霉素及强力霉素测定的新方法。该方法对4种四环素类抗生素的线性范围为5~50 μg/L,检出限为0.67~0.95 μg/L,定量下限为2.13~3.50 μg/L。实际样品的加标回收率为82.7%~103%,相对标准偏差(RSD)为1.0%~8.8%。方法可用于实际环境水样中4种四环素类抗生素的同时检测。     

分子印迹固相萃取-高效液相色谱法测定蜂蜜中三种氟喹诺酮类抗生素残留

采用沉淀聚合法,以诺氟沙星为模板分子,合成了对氟喹诺酮类(FQs)抗生素特异性识别的分子印迹聚合物(MIPs),其印迹因子为3.17,亲和位点总数为3.27μmol/g。以该MIPs做为固相萃取柱填料,建立了分子印迹固相萃取-高效液相色谱检测蜂蜜中三种FQs抗生素残留的方法。与Oasis HLB固相萃取柱相比,该分子印迹固相萃取柱(MISPE)具有更好的净化能力和更高的富集效率。最佳条件下,三种FQs抗生素的线性范围为0.125～12.5mg/kg,相关系数均大于0.999。方法的检出限(S/N=3)为9～12μg/kg,三种FQs抗生素的加标回收率为96.5%～104.1%,相对标准偏差不高于6.2%(n=5)。该方法有望用于蜂蜜中FQs抗生素残留的常规检测。     

Preconcentration of Nicotinamide Using Molecularly Imprinted Microspheres for Solid-phase Extraction with Determination by High-performance Liquid Chromatography

The determination of target molecules in complicated matrices such as biological samples is largely dependent on sample pretreatment. Molecularly imprinted solid-phase extraction (SPE), using molecularly imprinted polymers as the adsorbent, has been demonstrated to be effective for the selective enrichment of target molecules in biological samples. In this study, molecularly imprinted polymeric microspheres were fabricated by two-step swelling polymerization using polystyrene particles as seeds, nicotinamide as the template, methacrylic acid as a functional monomer, and ethylene glycol dimethacrylate as a cross-linker. The molecularly imprinted polymeric microspheres were packed into empty SPE cartridges, and the spiked urine and serum samples were loaded separately. After an initial washing and elution step, the effluents were analyzed by high-performance liquid chromatography (HPLC) using 1:9 methanol/0.05% phosphoric acid. The obtained molecularly imprinted polymeric microspheres were uniform, and the spherical particles were well distributed. The established method was validated, and the results showed that the method was linear from 0.499 to 19.96?µg?mL^?1. The limits of detection and quantification for nicotinamide were 0.3 and 0.9?µg?mL^?1, respectively. The relative standard deviations were 1.55 and 2.86% in urine and serum, respectively. The spiked recoveries of nicotinamide were 86.0–98.8% and 87.0–96.8% in urine and serum, respectively. The molecularly imprinted SPE and HPLC methods in this study are useful for the pretreatment and determination of the target compounds in these matrices.     

克百威分子印迹聚合物的合成及其性能评价

以克百威为模板分子,甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,采用沉淀聚合的方法制备了克百威分子印迹聚合物。通过红外光谱分析得到模板和功能单体的最佳配比为n(carbofuran)∶n(MAA)=1∶6。印迹聚合物的红外光谱测定结果表明,聚合物中存在与模板分子相互作用的特征基团;从印迹聚合物的扫描电镜图观察到分子印迹聚合物(MIP)与空白聚合物(NIP)的表面形态不同,可推论MIP存在与模板分子相互识别的结合位点。通过静态平衡结合法研究了模板分子聚合物的吸附能力、结合动力学和选择特性。结果表明,与非印迹聚合物相比,印迹聚合物对克百威具有较强的吸附特性和很好的专一选择性,3h后基本达到最大吸附量。采用固相萃取柱预处理样品,用高效液相色谱法测定自来水中10、50、100mg/L克百威的加标回收率为94%～117%,相对标准偏差(n=3)为2.5%～4.7%。     

Determination of Chlorogenic Acid and Rutinum in Herba Artemisiae Scopariae with Multitemplate Molecularly Imprinted Polymers for Solid-phase Extraction with High-performance Liquid Chromatography

Novel multitemplate molecularly imprinted polymers were prepared using mixtures of chlorogenic acid and rutinum as molecular templates, acrylamide as a functional monomer, divinylbenzene as the cross-linker, and 20:80 methanol:acetone as the porogen. The polymers were assessed for solid-phase extraction (SPE) for the purification of two compounds from Herba Artemisiae Scopariae. The synthesized molecularly imprinted polymers were identified by infrared spectroscopy and scanning electron microscopy. Systematic characterization of the functional monomer and porogens on the recognition properties of the molecularly imprinted polymers were carried out. Comparison with single-template molecularly imprinted polymers showed that the multitemplate molecular polymers exhibited higher selectivity and adsorption capacity for multiple analytes. The optimization of washing solvent as 1:9 acetone:water and the elution solvent as 9:1 acetonitrile:acetic acid provided a reliable analytical method with strong recognition toward multiple analytes in Herba Artemisiae Scopariae extracts with satisfactory recoveries of 89.6% for chlorogenic acid and 93.8% for rutinum. These results demonstrate that the multitemplate molecularly imprinted polymers coupled with SPE are effective for the selective purification of bioactive compounds in complex samples.