电热蒸发进样低功率MPT—AES测定铜,锌,镉的研究

微波等离子体炬(MPT)是一种具有类似ICP炬管结构的新型等离子体光源,该光源的基本性质已进行了详细的研究。本文采用自制的低功率MPT为激发光源,以氧为工作气体,用微型电热蒸发装置进样,测得铜、锌和镉的检出限分别为3.3、1.4和1.7ng/mL。考察了碱金属元素对铜、锌和镉发射信号的影响,该方法应用于钢样中铜的测定,结果较好。     

微波消解-微波等离子体炬原子发射光谱法测定合金钢中的铜、锰、钼

用微波等离子体炬 (MPT)为激发光源 ,氩气为等离子体工作气体 ,用气动雾化进样 ,研究了微波消解 微波等离子体炬原子发射光谱法 (MPT AES)测定合金钢中铜、锰、钼的方法。考察了微波功率、载气流量、工作气流量、氧屏蔽气流量等实验参数对测定铜、锰、钼的影响。对微波消解合金钢样品的消解条件进行了考察 ,建立了最佳消解程序。测定铜、锰、钼的检出限分别为 3.3、3.7和 42ng mL ,RSD(n =6)分别为 1 7%、2 .4%、3.8% ,并且测得它们的线性范围分别为0 .0 2～ 5 0 μg mL、0 .0 4～ 5 0 μg mL和 0 .2 0～ 5 0 μg mL。     

用同轴表面波激励器和微波等离子体炬获得的微波等离子体的性能研究

同轴表面波激励器和微波等离子体炬是两种获得微波等离子体(MWP)的装置,本文比较了用这两种装置获得的MWP作原子发射光谱法光源时的分析性能,结果表明这两种装置各有优点,但微波等离子体炬效果更好。     

微波等离子体炬原子发射光谱法测定可可粉中铅、铬和镉

建立了微波消解微波等离子体炬原子发射光谱法(MPT-AES)测定可可粉中铅、铬、镉含量的方法。对酸效应及共存离子干扰进行了详细考察。在最佳条件下,测得各元素的工作曲线相关系数均大于0.9990,铅、铬、镉的方法检出限分别为4.17μg·L-1、4.38μg·L-1、3.19μg·L-1,相对标准偏差(RSD)均小于3.85%,用MPT-AES法分析经微波消解处理的不同产地的可可粉,结果表明所测样品中重金属含量均符合国家限量标准,铅、铬、镉的加标回收率分别为95.2%~101.3%、96.4%~102.5%、95.7%~103.1%。     

气相色谱-微波等离子体炬双检测器及其气相色谱的响应特性

提出并建立了气相色谱-微波等离子体炬(MPT)原子发射光谱和离子化双检测器系统. 以Ar气作为等离子体工作气体, O2气作为等离子体屏蔽气体, 同时获得了被测组分的原子发射和离子化信息, 并对不同种类有机化合物的相对响应系数及检出限进行了测定.     

MPT-AES测定奶粉中的Ca和Fe

用微波等离子体(MPT)为激发光源,氩气为等离子体工作气体,用气动雾化进样,采用标准曲线法研究了微波等离子体炬原子发射光谱法(MPT-AES)测定奶粉中Ca、Fe的方法。详细考察了溶液中HCl浓度、HNO3浓度、微波前向功率、载气流量、工作气流量等实验参数对测定的影响,同时考察了共存元素钠、镁、锌对钙和铁发射强度的影响。     

微波等离子体用于消除温室气体全氟化物的研究进展

根据文献报道,评述了1997-2009年以来微波等离子体用于消除温室气体全氟化物的研究进展。介绍了几类微波等离子体系统,包括放电管型微波等离子体、微波等离子体共振腔反应器、炬型微波等离子体等(引用文献31篇)。     

微波等离子体炬发射光谱法测定高温合金中非金属元素

研究了微波等离子体炬原子发射光谱(MPT-AES)法测定高温合金中非金属元素(As、B、P、Si)的分析方法,考察此方法对高温合金行业非金属检测需求的适应性。对镍基高温合金样品进行酸溶解处理,选择适用的微波等离子体炬分析谱线,进行检出限、精密度测定。4种非金属元素的检出限在0.03~0.12μg/mL,10次数据的相对标准偏差(RSD,n=10)为0.88%~1.9%,此方法可用于高温合金中非金属元素的测定。     

微波等离子体炬原子发射光谱法测定高温合金中非金属元素

研究了微波等离子体炬原子发射光谱(MPT-AES)法测定高温合金中非金属元素(As、B、P、Si)的分析方法,考察此方法对高温合金行业非金属检测需求的适应性。对镍基高温合金样品进行酸溶解处理,选择适用的微波等离子体炬分析谱线,进行检出限、精密度测定。4种非金属元素的检出限在0.03~0.12μg/mL,10次数据的相对标准偏差(RSD,n=10)为0.88%~1.9%,此方法可用于高温合金中非金属元素的测定。     

微波等离子体炬发射光谱法测定锌的研究

研究了用微量进样-微波等离子体炬发射光谱法(MPTAES)测定锌的方法,考察了微波功率、载气流量、酸浓度等实验参数对锌发射强度的影响。方法测定锌的检出限为1.2ng/ml。对实际样品进行的分析令人满意。     

石墨炉原子吸收光谱法测定痕量镉的基体改进效应研究及其应用

研究了磷酸氢二钾对石墨炉原子吸收光谱法测定痕量镉的基体改进效应,试验表明,在磷酸盐存在下,镉的灰化温度能显著提高,钾对镉有一定的增感效应。以此建立了用磷酸氢二钾作基体改进剂,直接测定岩石、土壤和水系沉积物中痕量镉的方法。     

Elimination of interferences in electrothermal-atomization atomic-absorption spectrometry of cadmium

The determination of cadmium by use of a molybdenum-tube atomizer and atomic-absorption spectrometry has been investigated. The absorption profiles for various cadmium compounds and the interferences caused by large amounts of concomitants were evaluated. Sulphur was tested as a matrix modifier for removal of interference and found to be effective at the interferent levels likely to be found in biological samples. A simple, precise and convenient method for determination of cadmium in biological materials has been established.     

Determination of trace cadmium in waters by flame atomic absorption spectrophotometry after preconcentration with 1-nitroso-2-naphthol-3,6-disulfonic acid on Ambersorb 572

A procedure for the determination of trace amount of cadmium after adsorption of its 1-nitroso-2-naphthol-3,6-disulfonic acid chelate on Ambersorb 572 has been proposed. This chelate is adsorbed on the adsorbent in the pH range 3-8 from large volumes of aqueous solution of water samples with a preconcentration factor of 200. After being sorbed, cadmium was eluted by 5 mL of 2.0 mol L(-1) nitric acid solution and determined directly by flame atomic absorption spectrophotometery (FAAS). The detection limit (3sigma) of cadmium was 0.32 microg L(-1). The precision of the proposed procedure, calculated as the relative standard deviation of recovery in sample solution (100 mL) containing 5 microg of cadmium was satisfactory (1.9%). The adsorption of cadmium onto adsorbent can formally be described by a Langmuir equation with a maximum adsorption capacity of 19.6 mg g(-1) and a binding constant of 6.5 x 10(-3) L mg(-1). Various parameters, such as the effect of pH and the interference of a number of metal ions on the determination of cadmium, have been studied in detail to optimize the conditions for the preconcentration and determination of cadmium in water samples. This procedure was applied to the determination of cadmium in tap and river water samples.     

镉—溴化物—罗丹明B高灵敏显色反应的研究：离心光度法测定镉

本研究了一个高灵敏的测定镉的方法，离心光度法，该体系络合物λｍａｘ＝５６０ｎｍ，表观摩尔吸系数ε５６０＝５．０６×１０＾８Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，Ｃｄ＾２＋浓度０．１０×１０＾－２－１．０×１０＾－２μｇ／１０ｍＬ呈线性关系，本法已用于血清和水中痕量镉的测定，探讨了高灵敏的显色反应机理。     

Liquid-liquid extraction and spectrophotometric determination of cadmium with 1,10-phenanthroline and thymol blue

A simple and highly sensitive extraction spectrophotometric method was developed for the determination of traces of cadmium. The method is based on the preconcentrative extraction of ternary-ion-association complex of cadmium—1,10-phenanthroline-thymol blue into chloroform and subsequent determination by spectrophotometry. The ternary ion associate is stable for 20 h and cadmium content as low as 0.1 g in 90 ml of sample can be determined. The method is precise and has been applied to the determination of cadmium in sea water, solder and high purity zinc and indium materials.     

The ultraviolet spectrophotometric determination of cadmium by the diethyldithiocarbamate method

An ultraviolet spectrophotometric method for the determination of small amounts of cadmium is proposed. The method is based on measuring the absorbance at 262 mμ of the cadmium diethyldithiocarbamate chelale which has been extracted from basic solution with chloroform. The effect of solution variables and numerous diverse ions has been investigated.     

Electrothermal atomization atomic absorption spectrometry of cadmium with a platinum tube atomizer

The determination of cadmium by electrothermal atomization atomic absorption spectrometry with a platinum tube atomizer in the presence of air has been investigated. The detection limit of cadmium was 0.09 pg (9 pg/ml for a 10-mul volume). The relative standard deviation of the measurement was 2.9%. For 2.5 pg of cadmium, Cu, Pb, Zn, Al, Ca, Fe, K, Mg and Na (10(4)-10(5)-fold) did not interfere with the absorption signal. The method has been applied to the determination of cadmium in some biological materials. The average analytical value found for the standards lay within the limits of the certified values. The remarkable merits of the platinum atomizer are its stability in air and long life-time (able to withstand more than 1000 heating cycles in air).     

Sequential extraction--spectrofluorometric determination of lead and cadmium using cryptands.

A spectrofluorimetric method for the determination of ultratrace amounts of lead and cadmium is described based on the sequential extraction of the ternary ion-association complexes formed between the cation, a cryptand as the ligand and eosin as a counter ion. A linear working range from the detection limit (0.5 ng ml(-1) to 250 ng ml(-1) of lead and to 1 50 ng ml(-1) of cadmium was obtained. The relative standard deviation was 2-4%. The proposed method has been applied successfully to the determination of lead and cadmium in zinc metals and soft drinks.     

用流动注射在线预浓集－原子吸收光谱法测定痕量镉

研究了以巯基苯骈噻唑和８－羟基喹啉为复合萃取剂、活性硅胶为载体制成的色谱柱对镉离子吸附的条件，建立了痕量镉的流动注射在线预浓集－原子吸收光谱测定的新方法，变异系数１．３％，检出限０．０１ｍｇ／Ｌ．用于环境水分析，获得满意结果．     

Ion-pair extraction and fluorimetric determination of cadmium with cryptand 2.2.1 and eosin

A method is described for the direct spectrofluorimetric determination of ultratraces of cadmium by extraction into 1,2-dichloroethane of the ion-pair formed between the eosinate anion and the cationic complex of Cd²⁺ with cryptand 2.2.1. The detection limit for cadmium is 0.5 ng/ml, and the linear working range is from the detection limit to 150 ng/ml. The relative standard deviation is 1.5% at the 100 ng/ml level. The equilibrium constant has been estimated and refined by the Letagrop-DISTR program. The proposed method has been tested in the determination of cadmium in high-purity zinc. The results show good agreement with those found by the more common ICP emission photometry and anodic stripping voltammetry methods.