聚乙二醇-b-聚(D,L-丙交酯-co-碳酸丙二酯)的胶束化及其药物控释研究

通过开环共聚合成了由D,L-丙交酯、碳酸丙二酯和聚乙二醇构成的两亲性嵌段共聚物(PETLA),研究了PETLA胶束化及药物控释行为.嵌段共聚物和胶束通过核磁共振(1H-NMR)、荧光分光光度计、凝胶渗透色谱(GPC)、动态光散射(DLS)、透射电镜(TEM)和紫外光谱(UV)表征.实验结果发现临界胶束浓度随共聚物疏水链段长度增加而减小,胶束直径随疏水链段长度增加而增大.透射电镜照片表明载药胶束MT1直径为30~40nm,呈规则球形.体外释药表明9-NC以可控方式释放,突释后药物释放速率接近零级恒速.     

环形嵌段共聚物的胶束化行为模拟

利用Monte Carlo模拟, 对比了相同组成下环形二嵌段共聚物AB和线形三嵌段共聚物ABA在选择性溶剂中的胶束化行为. 结果发现, 相同链组成的环形和线形嵌段共聚物的临界胶束浓度(cmc)的差别与A嵌段的比例(f_A)及B嵌段间的吸引强度(ε)密切相关. 在f_A较小、 ε较大的情况下, 相应环形嵌段共聚物的cmc值更小; 而在f_A较大、 ε较小的情况下, 线形嵌段共聚物的cmc值更小. 为了进一步理解胶束化行为同f_A及ε的关系, 计算了胶束化过程中熵和势能部分对自由能的贡献. 结果表明, 在所研究的f_A和ε范围内, 环形嵌段共聚物形成胶束时的熵损失更小, 因而从熵贡献角度来看, 环形嵌段共聚物更易发生胶束化. 而从势能贡献角度来看, 当f_A较小、 ε较大时, 环形嵌段共聚物形成胶束时势能有较大程度的降低, 对自由能的贡献更大, 因而此时环形嵌段共聚物更易发生胶束化. 而当f_A较大、 ε较小时, 线形嵌段共聚物形成胶束时势能有较大程度的降低, 对自由能的贡献更大, 因而此时线形嵌段共聚物更易发生胶束化. 由此可见, 对体系的胶束化自由能进行系统分析, 有助于更好地理解环形和线形嵌段共聚物的胶束化行为.     

pH和温度诱导双亲水嵌段共聚物聚甲基丙烯酸-b-聚N-(2-甲基丙烯酰氧乙基)吡咯烷酮水溶液的胶束化

基于可逆加成裂解链转移自由基(RAFT)聚合法开发了一系列新型双亲水嵌段共聚物——聚甲基丙烯酸-b-聚N-(2-甲基丙烯酰氧乙基)吡咯烷酮(PMAA-b-PNMP),并利用凝胶渗透色谱法(GPC)和¹H NMR对其结构进行了表征。光散射和冷冻电镜的结果表明,此类双亲水嵌段共聚物的水溶液具有pH和温度诱导胶束化的现象,而且PNMP的聚合度对胶束化的pH和温度影响都非常大。一般而言,PNMP的聚合度越大,胶束化的pH值越小,胶束化的温度则越高。pD相关的¹H NMR结果表明,PNMP与PMAA片段和水分子之间氢键的削弱以及PNMP与PMAA链之间相互作用的增强是pH诱导PMAA-b-PNMP胶束形成的主要原因,而PNMP片段与水分子之间氢键的削弱则是温度诱导PMAA-b-PNMP胶束形成的主要原因。此外,我们发现在PMAA-b-PNMP体系中制备的纳米金颗粒的大小可通过溶液pH进行可控调节。总体而言,pH值越高,金纳米颗粒的粒径越小。     

温度/pH敏感性嵌段共聚物P(HEMA-co-DEAEMA)-b-PDEAM-b-P(DEAEMA-co-HEMA)的合成与性质研究

利用原子转移自由基聚合方法(ATRP)合成了组成递变的嵌段共聚物P(HEMA-co-DEAEMA)-b-PDEAM-b- P(DEAEMA-co-HEMA). 用FTIR, ¹H NMR和GPC技术表征了聚合物的组成、结构、分子量及其分布. 通过透光率测定、粘度、激光粒度分析和透射电镜研究了共聚物组成、温度及溶液pH对其溶液相行为和胶束化作用的影响. 结果表明: 所合成的嵌段共聚物具有温度和pH敏感性, 共聚物水溶液的低临界溶解温度(LCST)随HEMA量的增加而降低, 临界相变pH随HEMA量的增加而降低, 温度和pH诱导均可实现嵌段共聚物的胶束化. 控制HEMA量可以调控嵌段共聚物的LCST和pK_a.     

基于温敏性双亲嵌段共聚物的纳米胶束作为药物载体的研究

温度敏感性双亲嵌段共聚物由于其潜在的应用价值而引起广泛的关注。在药物控制释放领域,基于温敏性嵌段共聚物的纳米胶束作为药物载体显示了诸多特异的性能。在嵌段共聚物中引入具有温度敏感性的链段,使聚合物胶束具备天然被动靶向功能的同时,赋予了其主动靶向给药功能。本文从温度敏感性双亲嵌段共聚物的分子设计、合成、自组装性质和胶束的载药释药行为等方面进行了相关总结。重点介绍了含聚N-异丙基丙烯酰胺链段双亲嵌段共聚物的相关研究进展。     

温敏性PCL-PEG-PCL水凝胶的合成、表征及蛋白药物释放

考察了温敏性PCL-PEG-PCL水凝胶中聚乙二醇(PEG)及聚己内酯(PCL)不同嵌段组成对其溶胶-凝胶相转变温度以及亲水性药物(牛血清白蛋白, BSA)释放速率的影响. 采用开环聚合法, 以辛酸亚锡为催化剂、PEG1500/PEG1000为引发剂, 与己内酯单体发生开环共聚, 合成了一系列具有不同PEG和PCL嵌段长度的PCL-PEG-PCL型三嵌段共聚物. 通过核磁共振氢谱及凝胶渗透色谱对其组成、结构及分子量进行了表征. 共聚物的溶胶-凝胶相变温度由翻转试管法测定. 利用透射电镜、核磁共振氢谱及荧光探针技术证实了该材料在水溶液中胶束的形成. 以BSA为模型蛋白药物, 制备载药水凝胶, 利用microBCA法测定药物在释放介质中的浓度, 研究其体外释放行为. 实验结果表明, 共聚物的溶胶-凝胶相变温度与PCL及PEG嵌段长度紧密相关, 即在给定共聚物浓度情况下, 固定PEG嵌段长度而增加PCL嵌段长度, 会导致相变温度降低; 而固定PCL嵌段长度而增加PEG嵌段长度, 其相变温度相应升高. 水凝胶中蛋白药物的释放速率与疏水的PCL嵌段长度无关, 而与亲水的PEG嵌段长度密切相关, 即PEG嵌段越长, 蛋白药物释放越快.     

荧光标记pH敏感胶束的制备及其药物控释

利用原子转移自由基聚合方法（ATRP）合成了pH敏感的两亲性嵌段共聚物mPEG-b-PDPA_n（聚合度n=100-200）及荧光修饰的嵌段聚合物异硫氰酸荧光素-聚乙二醇-聚N,N-二异丙胺基甲基丙烯酸乙酯（FITCPEG₄₅-PDPA₁₀₀）。采用溶剂挥发的方法制备胶束,此胶束呈现均一的球形分布,平均粒径180-240 nm（0.3 mg·mL^-1）。以阿霉素（DOX）为模拟药物,其胶束载药量约11%（w,质量分数）左右,外环境pH对载药胶束的粒径和体外释放行为有显著影响。在弱酸环境下,胶束核质子化发生膨胀甚至解体,在2-3 h内药物可释放80%左右。体外毒性试验表明,空白胶束与人类肝癌细胞（Huh7）有良好的生物相容性。同时,与此细胞共同孵育5 h的荧光聚合物胶束体现了较好的转染效果。因此,这类荧光标记胶束可能会为实时跟踪化疗药物的输送或分布打开新的视角。     

PEO-PPO-PEO水溶液体系胶束化及凝胶化行为的耗散粒子动力学模拟

采用耗散粒子动力学(Dissipative particle dynamics, DPD)模拟方法研究了三嵌段共聚物聚氧乙烯-聚氧丙烯-聚氧乙烯(PEO-PPO-PEO)的胶束化和凝胶化行为. 通过模拟得到了F127(EO₉₉PO₆₅EO₉₉)水溶液的临界胶束浓度和临界凝胶浓度. 结果发现, 在298 K、 质量分数低于40%时, F127水溶液中形成的胶束形状均为球形. 此外,进一步研究了亲水嵌段长度对胶束结构及凝胶形成浓度的影响, 结果发现, 亲水嵌段越短, 越有利于长椭球状胶束的形成, 而临界凝胶浓度随着亲水嵌段PEO长度的增加而降低.     

高分子胶束化的新途径及胶束的结构演化

简述了嵌段共聚物和接枝共聚物在选择性溶剂中的胶束化行为，详细讨论了导致高分子胶束化的一些新途径，如利用特殊相互作用（氢键、离子相互作用 高分子／金属离子配合络合）、改变温度、介质环境和化学反应诱导等；并对高分子胶束结构的进一步演化以获得核交联和壳交联胶束作了简要的介绍。     

双重敏感mPEG-PDPA-P(AAm-co-AN)聚合物自组装体的药物递送

设计合成了一种新型两亲性三嵌段ABC聚合物聚乙二醇单甲醚-聚甲基丙烯酸二异丙胺基乙酯-聚(丙烯酰胺-co-丙烯腈)(mPEG-PDPA-P(AAm-co-AN))。该聚合物具有pH敏感嵌段PDPA和温度敏感嵌段P(AAm-co-AN)，临界溶解温度(UCST)较高，且可以通过改变单体比例来调节UCST。在室温、中性环境下，该聚合物通过自组装形成刺激响应型胶束，可用于抗肿瘤药物的控释研究。温度升高诱导聚合物胶束向不对称囊泡结构转变，pH降低促使聚合物形成更加松散的胶束。在体外释药探究中，聚合物胶束对亲水药物阿霉素(DOX)和疏水药物槲皮素都具有良好的载药效果，在37℃、pH=7.4的条件下泄漏量低，随着温度升高和pH降低，胶束释放药物的速率和释放量明显增加。     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

微量元素与疾病诊断治疗的研究现状及展望

对国内外微量元素与疾病的关系及其诊断治疗的研究现状及研究动向进行了综述，包括：微量元素与地方病、癌肿、心血管病、糖尿病、眼病、神经系统病等。参考文献72篇。     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

Synthesis and Optical and Redox Properties of Symmetric and Asymmetric BODIPYs

Herein, we present the synthetic route and the photophysical, electrochemical as well as laser properties of novel red‐emitting boron‐dipyrromethenes (BODIPYs) bearing arylethyne moieties. Such functionality is added along the main axis of the chromophore leading to single‐ and double‐substituted derivatives. The relationship between the dye structure and the lasing properties is studied in detail with the help of the photophysical and electrochemical properties as well as quantum mechanical simulations. The asymmetric substitution of the parent dye induces inhomogeneities in the charge distribution, which leads to an overall loss of the fluorescence capacity, mainly in polar media. Such non‐radiative deactivation processes can be softened by decreasing the electron‐donor ability of the substituent or even avoided by symmetrical substitution. Thus, grafting of the arylethyne moieties at the longitudinal axis of the indacene core results in an effective strategy to develop red‐edge BODIPYs with highly efficient and photostable laser emission.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

钒与糖代谢及糖尿病

微量元素钒作为生物体内必需元素，经证实有很重要的生理学功能，与机体糖代谢有十分密切的关系，且能降低糖尿病动物模型的高血糖，极有可能被开发为治疗糖尿病的药物。     

Conformations and steric and stacking interactions of trisubstituted ureas and thioureas with alkyl and phenyl groups

The monomeric ν(N—H) vibrations of various trisubstituted ureas of the R₂UPh type and -thioureas of the R₂TUPh type have been studied. The trans—out isomerism in the former and the trans—out—cis isomerism in the latter are discussed from the point of view of steric effect. The monomeric ν(N—H) vibrations of RPhUPh and RPhTUPh are also examined. The single band appearing in the spectrum of both ureas is characteristic of the cis form; this suggests the existence of phenyl—phenyl interaction (the stacking interaction proposed by Galabov et al. [10]). Behavior of ν(N—H) vibrations at several concentrations is shown to be clearly different in the three forms (trans, out and cis). The presence of the cis form is confirmed by solvent effect experiments.     

Synthesis of Tyrosol and Hydroxytyrosol Glycofuranosides and Their Biochemical and Biological Activities in Cell-Free and Cellular Assays

Tyrosol (T) and hydroxytyrosol (HOT) and their glycosides are promising candidates for applications in functional food products or in complementary therapy. A series of phenylethanoid glycofuranosides (PEGFs) were synthesized to compare some of their biochemical and biological activities with T and HOT. The optimization of glycosylation promoted by environmentally benign basic zinc carbonate was performed to prepare HOT α-L-arabino-, β-D-apio-, and β-D-ribofuranosides. T and HOT β-D-fructofuranosides, prepared by enzymatic transfructosylation of T and HOT, were also included in the comparative study. The antioxidant capacity and DNA-protective potential of T, HOT, and PEGFs on plasmid DNA were determined using cell-free assays. The DNA-damaging potential of the studied compounds for human hepatoma HepG2 cells and their DNA-protective potential on HepG2 cells against hydrogen peroxide were evaluated using the comet assay. Experiments revealed a spectrum of different activities of the studied compounds. HOT and HOT β-D-fructofuranoside appear to be the best-performing scavengers and protectants of plasmid DNA and HepG2 cells. T and T β-D-fructofuranoside display almost zero or low scavenging/antioxidant activity and protective effects on plasmid DNA or HepG2 cells. The results imply that especially HOT β-D-fructofuranoside and β-D-apiofuranoside could be considered as prospective molecules for the subsequent design of supplements with potential in food and health protection.     

Ferrocene and ferrocenium modified clays and their styrene and EVA composites

In this work, ferrocene- and ferrocenium-containing salts were employed to modify montmorillonite. X-ray measurements show an increase in the interlayer spacing upon clay modification, which means that the larger and more organophilic cations were inserted into the gallery space of montmorillonite. Attempts to prepare nanocomposites of polystyrene and ethylene vinyl acetate copolymers lead to immiscible systems; the morphology of these systems was elucidated with TEM, XRD and cone calorimetry. The thermal stability of the composites is greater than that of the virgin polymer.