电极界面缓冲层对P3HT:PC61BM太阳能电池热稳定性的影响

基于溶液法加工制备的聚合物太阳能电池的高温热稳定性是决定器件能否兼容后续高温热封装工艺, 如热压封装、高温原子层沉积(ALD)等的一个关键. 本文分别利用聚(3, 4-乙烯二氧噻吩)-聚苯乙烯磺酸(PEDOT:PSS)和MoO₃作为阳极缓冲层, 以及ZnO和LiF 作为阴极缓冲层, 制备了结构为氧化铟锡(ITO)/阳极缓冲层/3-己基取代聚噻吩:(6, 6)-苯基C₆₁-丁酸甲酯(P3HT:PC₆₁BM)/阴极缓冲层/Al 的太阳能电池, 系统地比较研究了不同界面缓冲材料对器件光电转换性能及稳定性的影响, 特别是在高温煺火条件下器件的性能稳定性差异. 结果表明, 聚合物太阳能电池的热稳定性同器件的结构以及所用的缓冲层材料有密切的相关性. 其中, 利用MoO₃及ZnO分别作为阳极与阴极界面修饰层的P3HT:PC₆₁BM器件在120-150 ℃的温度范围内能够较好地保持器件的光电转换性能. 这一结果为后续需要高温封装工艺的器件提供了有意义的结构优化指导. 此外, 研究结果还表明利用ZnO作为阴极缓冲层能够改善器件的长时间稳定性.     

有机及有机无机杂化太阳电池中的界面研究

第3代可溶液加工的太阳电池(包括有机太阳电池、钙钛矿太阳电池等),因为制备成本低、可制备柔性器件等特点备受关注.它们的迅速发展与活性层材料、界面材料与修饰以及器件工程等方面的快速发展息息相关,其中器件中的各个界面对激子的分离、载流子传递和收集有着巨大的影响,影响着器件的性能.本文重点介绍了近年来我们课题组在有机太阳电池、聚合物/量子点杂化太阳电池以及钙钛矿太阳电池研究中,如何设计界面材料以及通过自组装层对电极进行界面修饰,实现活性层和电极之间的欧姆接触和载流子的有效收集;如何在界面层中引入具有等离激元效应的纳米粒子实现光场的有效利用和性能的提升;以及如何对聚合物和纳米粒子间的界面修饰实现载流子的高效分离,制备高性能的杂化太阳电池器件.     

紫外臭氧处理增强溶液法MoO3薄膜的空穴注入能力

空穴注入层对有机发光二极管的性能有重要的影响,尤其是当器件中的空穴传输材料的最高占据分子轨道能级较深的时候。近年来有许多关于新型的溶液法空穴注入材料的研究。在本文中,我们对溶液法MoO₃薄膜使用了三种不同的处理方法来研究其对空穴注入性能的影响,即：在空气中150 ℃退火;在空气中150 ℃退火再紫外臭氧处理(UVO) 15 min;只进行UVO处理15 min。结果发现当MoO₃薄膜在空气中150 ℃退火后,器件的电流最小,空穴注入能力最差。而当MoO₃薄膜经过UVO处理后,器件的电流显著增大,工作电压大幅下降,器件性能接近于蒸镀的MoO₃薄膜的器件。更惊喜的是,这种改善在MoO₃薄膜仅作UVO处理后也可获得。经定量计算发现MoO₃薄膜经过UVO处理后的空穴注入效率能提高到约0.1。XPS分析表明通过UVO处理后,MoO₃薄膜中Mo⁵⁺成分减少并且薄膜表面的富氧吸附物被有效地消除,使得其化学计量基本与蒸镀的MoO₃薄膜相同。基于这种经UVO处理的溶液法MoO₃作为空穴注入层,器件的最大电流效率可达到48.3 cd∙A⁻¹。     

水/醇溶共轭聚合物界面材料及其在光电器件中的应用

相对于传统的无机半导体器件,以有机半导体(特别是聚合物半导体)材料为基础的有机光电器件,可采用与传统印刷技术(例如喷墨打印、卷对卷印刷等)相结合的溶液加工方式制备低成本、大面积、柔性光电器件,因而成为广泛关注的焦点,并得到了快速发展.实现溶液加工的高效有机光电器件的一个关键问题是界面问题——如何避免溶液加工时有机层间的互溶以及如何实现可印刷稳定金属电极的高效电子注入等.水/醇溶性共轭聚合物的迅速发展为解决溶液加工多层有机光电器件所面临的界面问题提供了有效手段.研究发现,水/醇溶共轭聚合物不但可以有效避免溶液加工多层器件中的界面互溶,而且还可与高功函数的稳定金属发生界面偶极相互作用而增强其电子注入,从而解决了高功函数稳定金属电子注入的难题,为实现全溶液加工的高效印刷有机光电器件提供了可行的方案.本文介绍了近年来本课题组在水/醇溶共轭聚合物阴极界面材料及器件应用方面的研究进展,并对水/醇溶共轭聚合物阴极界面材料在聚合物发光二极管和聚合物太阳电池中的工作机理进行了探讨.     

聚合物光伏材料与器件研究进展

高效率的聚合物太阳电池依赖于光吸收活性层材料对太阳光能量的充分利用．电极界面材料将光吸收活性层产生的空穴和电子分别快速高效地抽取到阳极和阴极,并通过进一步改进光伏器件的结构提升能量转换效率和稳定性．本课题组在光吸收活性层中新型聚合物给体材料、新型电极界面材料、利用水／醇性电极界面材料制作新型倒装器件结构的太阳电池方面取得重要进展,推动了太阳电池在能量转换效率和稳定性方面的突破．     

二维硫化钼基原子晶体材料的化学气相沉积法制备及其器件

二维过渡族金属硫属化合物因其带隙具有强烈的层数依赖性而在电子器件方面具有广泛的应用前景.其中单层二硫化钼(MoS₂)是该系列材料中最典型的一种直接带隙半导体,它具有优异的光、电、磁、热和力学性能.二维MoS₂有望在光电探测、光伏器件、场效应晶体管、存储器件、谷电子和自旋器件、温差电器件、微纳机电器件和系统等方面得以广泛应用.化学气相沉积(CVD)法已成为制备二维过渡族金属硫属化合物如MoS₂、MoSe₂、WS₂和WSe₂等原子层薄膜的主要手段,尤其科学界利用CVD法对二维MoS₂材料进行了深入的制备探索,通过该方法制备的MoS₂薄膜在电子和光电器件方面已经有广泛研究.本文将从二维MoS₂的基本物性出发,详细介绍CVD法制备MoS₂的各种工艺过程,如热分解硫代硫酸盐法、硫化Mo(MoO_3-x)薄膜制备法、MoO_3-x粉体与硫属前驱体气相合成法和钼箔表面直接硫化法,并介绍了基于MoS₂的二维异质结构筑方法.在制备材料的基础上,详细阐述了二维MoS₂在场效应晶体管、光电探测器、柔性电子器件以及异质结器件方面的应用,并展望了二维材料在半导体器件中的应用前景.     

热退火气氛对溶液法制备的Sb2S3薄膜组成、结构及光伏性能的影响

采用化学浴(CBD)法在TiO₂薄膜表面制备结晶性Sb₂S₃膜层, 获得了TiO₂/Sb₂S₃平板异质结, 并结合聚[2,6-{4,4-双-(2-乙基己基)-4H-环戊并[2,1-b;3,4-b']-二噻吩}-交替-4,7-(2,1,3-苯并噻二唑)](PCPDTBT)空穴传输层和MoO₃电极界面修饰层, 制备了FTO/TiO₂/Sb₂S₃/PCPDTBT/MoO₃/Au平板结构太阳能电池, 研究了CBD方法中热退火气氛对Sb₂S₃薄膜的组成、 结构及光伏性能的影响. 结果表明, 在N₂气氛下退火时, 所得的Sb₂S₃膜层不致密且含有Sb₂O₃杂相, 电池效率仅为0.90%; 而在N₂-S气氛下退火时, 硫会与杂相Sb₂O₃发生反应生成Sb₂S₃, 进而得到纯净、 致密、 平整的结晶Sb₂S₃膜层. 在平板结构太阳能电池中, 光生空穴对电池光电流的产生有明显的贡献; 随着Sb₂O₃杂相的消除, Sb₂S₃薄膜中载流子的复合减少且传输速率增大, 使太阳能电池器件中电子与空穴的收集效率和短路电流显著提高, 电池效率提高了1.34倍, 达到2.04%.     

聚合物太阳能电池阴极修饰层研究进展

聚合物太阳能电池以其质量轻、成本低、制备工艺简单等优点成为清洁能源利用的研究热点.近年来聚合物太阳能电池光电转换效率逐步提高,单结聚合物太阳能电池的光电转换效率已超过11%,其中器件的界面修饰层成为影响器件光伏性能的重要因素.本文总结了聚合物太阳能电池阴极修饰层的研究进展,分别从无机材料和有机材料两方面介绍了常用的阴极修饰层材料.无机材料包括金属氧化物、金属和金属化合物等,有机材料包括聚合物、富勒烯衍生物以及n-型有机半导体材料等.本文还从阴极修饰层的电学特性、光学特性、能级位置、表面形貌、界面接触等方面讨论了其对聚合物太阳能电池光伏性能的影响,展望了聚合物太阳能电池的发展前景.     

Y2O3/TiO2 "核-壳"结构在染料敏化太阳电池中的应用

在纳米TiO₂多孔薄膜表面包覆超薄绝缘体,形成"核-壳"结构的势垒层,是目前染料敏化太阳电池（DSC）光阳极改性的研究热点之一.本文选取氧化钇（Y₂O₃）作为包覆层材料,采用浸渍法对纳米TiO₂多孔薄膜进行修饰,研究Y₂O₃包覆处理对TiO₂薄膜微观结构及能带结构的影响;将浸渍法制备得到的Y₂O₃/TiO₂"核-壳"结构光阳极应用于DSC中,研究了饣覆层对电子传输复合以及DSC光电转换性能的影响.结果表明,Y₂O₃包覆处理后,薄膜的平带电势负移,且电子复合得到有效抑制,电子寿命增大,电池的开路电压明显提高.研究表明,适量引入Y₂O₃可以达改善电池性能的目的.     

ZnS/SiO2协同包覆光阳极制备高效率Zn-Cu-In-Se量子点敏化太阳能电池

通过光阳极协同包覆的策略抑制Zn-Cu-In-Se(ZCISe)量子点敏化太阳能电池(QDSC)中光阳极/电解液界面上的电荷复合过程,提高电荷收集效率和电池光伏性能。采用溶液法在ZCISe量子点敏化的光阳极表面依次沉积包覆ZnS和SiO₂双钝化层,实现较单一ZnS包覆层更有效的界面电荷复合抑制作用,从而提高QDSC的性能。在包覆ZnS/SiO₂双钝化层后,所组装的ZCISe QDSC光电转换效率由传统单一ZnS包覆的12.17%提高到13.23%,这归因于双钝化层对光阳极/电解液界面电荷复合过程的有效抑制,电荷收集效率得到相应提升。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.