共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
3.
环糊精及其衍生物具有“内疏水、外亲水”的特殊分子结构,可与许多客体分子包结形成包合物。利用环糊精与聚合物的包结作用构建稳定、结构可控并具有广泛应用前景的生物医用材料是材料及医学界研究的焦点之一。本文介绍了环糊精基(准)聚轮烷的概念及其组装驱动力,同时围绕由环糊精和聚合物组装形成的(准)聚轮烷在生物医用方面的研究包括药物载体(如超分子凝胶、超分子胶束、超分子纳米囊泡、药物键合(准)聚轮烷、刺激响应型(准)聚轮烷等)、基因载体、多重识别与靶向、形状记忆材料及其它相关领域工作进展作一概述。 相似文献
4.
5.
分子梭作为分子机器的一种主要类型,大多是建立在主客体识别的基础上的,其在分子开关、分子逻辑门、信息存储等领域有着重要的潜在应用价值,是超分子化学领域的研究热点之一。本文介绍了分子梭的概念、原理,详细归纳了具有刺激响应型的分子梭。并且,按照外界刺激源的不同,将刺激响应型分子梭分为光驱动、pH驱动、氧化还原驱动以及多重驱动的分子梭。阐述了不同驱动方式的分子梭的结构特点、运动规律、研究进展及潜在应用,分析了刺激响应型分子梭目前面临的问题,并对其今后的发展趋势做了展望。 相似文献
6.
聚乙烯醇的热降解及热塑加工改性研究进展 总被引:1,自引:0,他引:1
聚乙烯醇(PVA)是一种含有大量羟基的水溶性高分子材料,由于其优良的成膜性、水溶性、气体阻隔性、机械性能和生物降解性,已被广泛应用于纤维,薄膜,粘结剂等领域。但PVA的熔融温度和分解温度接近,使得熔融的同时发生分解反应,难于热塑加工。因此对PVA进行改性以提高热塑加工性能成为该材料研究的重要方向之一。常用的改性方法包括化学改性,物理改性和与其它高分子材料复合改性。本文综述了近年来在PVA的热降解行为以及实现PVA热塑加工的改性技术方面的研究进展。 相似文献
7.
通过多巴胺表面原位聚合反应修饰玻璃微珠, 利用X光电子能谱仪(XPS)和傅里叶变换红外光谱仪 (FTIR)对修饰前后玻璃微珠表面的化学组成进行了表征, 用热失重分析仪(TGA)对其热稳定性进行了测试, 并利用透射电子显微镜(TEM)和扫描电子显微镜(SEM)对其形貌进行了观察; 研究了改性玻璃微珠对形状记忆共混物聚己内酯和聚氨酯(PCL/TPU)的热性能、 力学性能和形状记忆性能的影响. 结果表明, 成功制备了表面包覆聚多巴胺的玻璃微珠(PHGM), 改性玻璃微珠的加入不仅增强了复合材料的力学性能(当改性玻璃微珠含量为3%时, 材料的拉伸强度提高到53.3 MPa, 杨氏模量提高到178.4 MPa), 还赋予了复合材料优异的光热效应. 所制备的形状记忆复合材料在808 nm近红外光的照射下, 可以在短时间内(7 s)升高到材料的开关温度并回复到初始形状. 相似文献
8.
PVA改性PAMPS-PAM超高力学性能双网络水凝胶的制备 总被引:2,自引:0,他引:2
采用紫外光引发聚合制备了聚乙烯醇(PVA)改性的聚(2-丙烯酰胺基-2-甲基丙磺酸)-聚丙烯酰胺(PAMPS-PAM)双网络(DN)水凝胶.测定并比较了PVA改性前后PAMPS-PAM双网络水凝胶的溶胀动力学;通过扫描电子显微镜(SEM)观察了单网络水凝胶的结构;测定PVA改性前后PAMPS-PAM双网络水凝胶的压缩及拉伸性能.结果表明,经PVA改性后的PAMPS-PAM双网络水凝胶有较高的溶胀比;0.82%PVA用量的PAMPS-PAM双网络水凝胶在90%压缩形变率下仍保持完整、最大拉伸应力达到0.5 MPa,大幅提高PAMPS-PAM双网络水凝胶的力学性能. 相似文献
9.
针对发光共轭聚合物稀溶液在干燥形成固体时的荧光淬灭问题, 通过高分子聚乙烯醇(PVA)的氢键网络调控水溶性共轭聚噻吩在溶液中的聚集行为和构象, 并采用不同的干燥方式实现了调控其固体光学性质的目的. 紫外-可见光吸收、荧光发射光谱测试表明, 在水溶液中PVA可以分散共轭聚合物链, 并增强其共平面性; 高温干燥后, 聚噻吩薄膜与无PVA添加的聚噻吩溶液的荧光性质相似; 而采用冷冻干燥法, 薄膜则保留了添加PVA后混合溶液的发光特性. 该结果表明, PVA对聚噻吩在溶液状态下的聚集/分子构象的调控行为随干燥方式的不同得到了不同程度的保留——高温加热干燥仅维持了PVA对聚噻吩的分散作用; 而冷冻干燥则完整保留了PVA与聚噻吩的分子间相互作用, 将溶液中分子的分散状态和构象同时固定. 本研究从干燥方式的角度为固态共轭聚合物聚集行为及发光性质的调控提供了新的策略. 相似文献
10.
11.
Ze Liu Li-xiang Wang Xia-bin Jing Fo-song Wang The State Key Laboratory of Polymer Physics Chemistry Changchun Institute of Applied Chemistry Chinese Academy of Sciences Changchun China 《高分子科学》2001,(6):615-621
Two new blue light-emitting PPV-based conjugated copolymers containing both an electron-withdrawing unit(triazole-TAZ) and electron-rich moieties (carbazole-CAR and bicarbazole-BCAR were prepared by Wittig condensationpolymerization between the triazole diphosphonium salt and the corresponding dialdehyde monomers. Their structures andproperties were characterized by FT-IR, TGA, DSC, UV-Vis, PL spectroscopy and electrochemical measurements. Theresulting copolymers are soluble in common organic solvents and thermally stable with a T_g of 147℃ for TAZ-CAR-PPVand of 157℃ for TAZ-BCAR-PPV. The maximum photoluminescence wavelengths of TAZ-CAR-PPV and TAZ-BCAR-PPV film appear at 460 nm and 480 nm, respectively. Cyclic voltammetry measurement demonstrates that TAZ-BCAR-PPVhas good electrochemical reversibility, while TAZ-CAR-PPV exhibits the irreversible redox process. The triazole unit wasfound to be an effective π-conjugation interrupter and can play the rigid spacer role in determining the emission colour ofthe resulting copolymer. 相似文献
12.
A novel bipolar conjugated polymer containing triphenylamine and 1,3,4-oxadiazole units was synthesized by Suzuki reaction.Its structure and properties were characterized by NMR,IR,UV-Vis,PL spectroscopy and electrochemical measurement. The photoluminescent spectroscopy and cyclic voltammograms measurement demonstrated that the resulting polymer shows blue emission (477 nm) and possesses both electron and hole-transporting property. 相似文献
13.
共轭聚合物材料及电致发光器件 总被引:5,自引:0,他引:5
共轭聚合物是一种极有应用前景的有机半导体材料,本文综述其研究进展,包括典型共轭聚合物材料PPV、PT、PF等及PPP的工作原理,发展前景和存在的问题。 相似文献
14.
15.
16.
17.
Rajendra R. Bhat Michael R. Tomlinson Jan Genzer 《Journal of polymer science. Part A, Polymer chemistry》2005,43(23):3384-3394
Orthogonal polymer brush gradients are assemblies of surface-anchored macromolecules, in which two material properties of the grafted chains (e.g., grafting density, molecular weight) vary independently in orthogonal directions. Here, we describe the formation and applications of two such orthogonal assemblies, involving: (1) molecular weight and grafting density (MW/σ) gradients of a given polymer and (2) molecular weight gradients (MW1/MW2), of two different polymers. Each point on orthogonal gradient substrate represents a unique combination of the two surface properties being varied, thus facilitating systematic investigation of a phenomenon that depends on the two said properties. We illustrate this point by employing orthogonal structures to study systematically: (1) formation of polymer brush-nanoparticle composite assemblies, (2) protein adsorption and cell adhesion, and (3) chain conformations in tethered diblock copolymers exposed to selective solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3384–3394, 2005 相似文献
18.
本文研究了聚甲基丙烯酸三乙基锡酯(PTETM)在二十五种溶剂中的溶解性能。测定了PTETM试样在不同溶剂中的特性粘数,估算了PTETM的三维溶度参数为:δ=18.8(J/cm~3)~(1/2);δ_d=16.8(J/cm~3)~(1/2);δ_p=6.28(J/cm~3)~(1/2);δ_h=5.73(J/cm~3)~(1/2)。并就聚合物中锡原子上的取代基对其溶解性能的影响进行了讨论。作者还订定了PTETM在四氢呋喃溶液中,25℃时的MHS方程为[η]=2.55×10~(-3)M_w~(0.691);在甲苯溶液中,30℃时的MHS方程为[η]=2.79×10~(-3)M_w~(0.662)。利用Burchard-Stockmayer-Fixman关系,由四氢呋喃体系(25℃)和甲苯体系(30℃)所求得的Flory特征比C_∞=9.4。 相似文献
19.
Eric F. Connor Inez Lees Derek Maclean 《Journal of polymer science. Part A, Polymer chemistry》2017,55(18):3146-3157
Polymer drugs are those in which a polymer agent has a direct therapeutic effect on the body. A major investigated area of polymer drugs is their use as binding agents, or sequestrants, which can neutralize or remove undesired components from the body. By taking advantage of the unique properties of crosslinked, insoluble polymers, new polymer drugs continue to be developed for oral use, acting in the gastrointestinal tract and excreted in the feces. Soluble polymer binders may be administered by a variety of routes and act at diverse sites of therapeutic action. This article reviews the properties of polymer drugs, particularly sequestrants, with an emphasis on recent advances in polymer properties which may enhance the utility of this class of drugs. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3146–3157 相似文献
20.
采用对氯苯甲醛和联苯二胺为原料,合成了4,4′-二氯代苄叉联苯胺,发现该化合物具有热致液晶性。利用所合成的二氯代化合物与硫化钠在醋酸锂催化下缩取得得到了含硫聚西佛碱探讨了高分子量含硫聚西佛碱的合成方法。测出该含硫聚西佛碱具有3.4×10~(-11)S/cm本征导电率。使用红外光谱、元素分析等方法表征了所合成的聚合物。 相似文献