系列Co-btec配合物的合成、结构及光-电性能

采用水热合成方法得到了3种Co(II)配合物: [Co(μ4-btec)0.5(phen)(H2O)]n (1), [Co2(μ4-btec)(bipy)2(H2O)2]n (2), [Co2(μ2-btec)(phen)2(H2O)4] (3) (phen＝1,10-phenanthroline, bipy＝2,2’-bipyridine, H4btec＝1,2,4,5-benzenetetracarboxylic acid). X射线单晶衍射结果表明: 3个配合物都是以均苯四甲酸根做为桥, 分别形成了2D, 1D和双核结构. 但在3种配合物中, 均苯四甲酸根的配位模式各不相同, 分别采用了μ4-η1η2η1η2, μ4-η1η1η1η1, μ2-η1η1η1η1配位模式. 此外, 分子间大量氢键的存在和π-π堆积作用又将3个配合物网成了3D无限结构. 通过红外光谱(IR)、电子吸收光谱(UV-Vis-NIR)及表面光电压光谱(SPS)等方法对配合物进行了表征. 3种配合物的表面光电压谱研究表明: 它们在300～600 nm范围内均有正的光伏响应. 将SPS与其电子吸收光谱进行关联, 发现它们基本上是一致的.     

对二茂铁基苯甲醛双缩间苯二胺盐酸盐Schiff碱及其过渡金属配合物的合成与表征

合成了新的二茂铁基苯甲醛双缩间苯二胺盐酸盐Schiff碱[m-C6H4(NCH)2(Cp′FeCp)2]及其过渡金属配合物[m-C6H4(NCH)2(Cp′FeCp)2·MCl2(M=Pd2+,Fe2+,Zn2+)]。其结构经1HNMR,IR和元素分析表征。     

二价双核铀聚吡咯配合物结构设计和铀-铀多重键的理论研究

经三十余年努力,二价铀溶液化学于近年取得突破性进展,Evans和Meyer等成功获得两个可通过X-ray晶体衍射表征结构的有机金属铀（II）配合物.为进一步拓展U^II配合物化学和探索可能存在的金属多重键,设计双核配合物[（U^II）₂（L）]（L为八齿氮供体低聚吡咯大环四价阴离子）,并使用相对论密度泛函理论优化其可能的电子自旋态异构体结构和计算相关性质.结果表明,[（U^II）₂（L）]具有三重态基态,其电子组态为π⁴σ²δ²;U（5f）原子轨道对高占据分子轨道有重要贡献;它的U-U键长为2.33Å、Mayer键级为3.89和对应的伸缩振动频率为259 cm^-1,被指认为U-U弱四重键.这一结论与QTAIM （quantum theory of atoms in molecule）的U-U键临界点处的电子/能量密度拓扑分析结果相一致.与不同氧化态铀同类物[（U^m）₂（L）]ⁿ⁺ （m=III,n=2;m=IV,n=4）比较显示,随着铀氧化态增大,U-U距离增长、键级变小、伸缩振动频率变小,金属铀电子自旋密度与常规预期值的差值（?S_U）增大;结合分子轨道和QTAIM参数分析,发现金属氧化态可以调控配体和金属轨道能级匹配程度和改变金属-金属多重键.     

碳锗双桥连二环戊二烯与羰基铁的反应

碳锗双桥连二环戊二烯(Me₂C)(Me₂Ge)(C₅H₄)₂(1)与五羰基铁在回流甲苯及二甲苯中的反应,得到正常的Fe-Fe键化合物(Me₂C)(Me₂Ge)[(η⁵-C₅H₃)Fe(CO)]₂(μ-CO)₂(3)和脱锗桥产物(Me₂C)[(η⁵-C₅H₄)Fe(CO)]₂(μ-CO)₂(4)以及一个结构新颖的化合物(Me₂C)[(η⁵-C₅H₃)[(Me₂Ge)Fe(CO)₂](η¹,η⁵-C₅H₃)[Fe(CO)₂](2).用X射线衍射分析測定了化合物3的晶体结构,并提出了可能的生成机理.     

氮、氧为配位原子的铅(Ⅱ)混合配合物的稳定性研究Ⅳ.铅(Ⅱ)-芳香氮碱-苯烷基丙二酸体系

混合配体配合物中配体间的相互作用在金属酶化学及其生物识别过程中具有重要意^[1,2].以往的研究,主要针对具有部分填充的3d过渡金属离子与芳香氮碱、氨基酸或一元羧 配合物体系^[3,4].铅(Ⅱ)为非过渡的主族金属离子,我们在对其PbLA型配合物的研究时 ,配合物中也存在配体间的相互识别作用^[5～7].     

含功能取代基的C2Mo2簇合物的合成与晶体结构测定

利用苯乙炔或丙炔醇与[Mo(CO)₂(η⁵-C₅H₄R¹)]₂[R¹＝C(O)Me,C(O)OEt,C(O)Ph]的反应合成了6个新的炔烃配位的双钼化合物[Mo(CO)₂(η⁵-C₅H₄R¹)]₂(μ-η²,η²-(CH=CR²)[R¹＝C(O)Me,R²＝Ph,1;R¹＝C(O)OEt,R²＝Ph,2;R¹＝C(O)Ph,R²＝Ph,3;R¹＝C(O)Me,R²＝CH₂OH,4;R¹＝C(O)OEt,R²＝CH₂OH,5;R¹＝C(O)Ph,R²＝CH₂OH,6],并对这些化合物进行了C/H元素分析,IR,¹HNMR等表征.晶体X射线衍射分析结果表明,化合物1属单斜晶系,P2₁(＃4)空间群,晶胞参数a＝0.7671(2)um,b＝0.8365(2)nm,c＝1.8308(3)nm,β＝98.34(1)°,V＝1.1623(5)um³,Z＝2,D_c＝1.772g·cm^-3,F(000)＝616,R＝0.041,R_w＝0.045.     

钌多吡啶配合物的合成及插入配体的位阻效应对键合DNA的影响

合成了2,3-二甲基-1,4,8,9-四氮三联苯(dmtatp)和2,3-二苯基-1,4,8,9-四氮三联苯(dptatp)两种新配体及它们与2,2′-联吡啶和钌(Ⅱ)的混配物[Ru(bpy)₂dmtatp]²⁺(1)和[Ru(bpy)₂dptatp]²⁺(2),用电子吸收光谱、稳态荧光、粘度测定和圆二色谱研究了配合物与小牛胸腺DNA的相互作用。结合我们以前对配合物[Ru(bpy)₂tatp]²⁺(3)(tatp为1,4,8,9-四氮三联苯)与小牛胸腺DNA的作用研究,得出配合物与DNA的键合强度顺序为:[Ru(bpy)₂tatp]²⁺>[Ru(bpy)₂dptatp]²⁺>[Ru(bpy)₂dmtatp]²⁺,这与插入配体的位阻效应的减少趋势相一致。同时,还测定了配合物与DNA的键合常数。     

二茂铁基β-二酮锌(Ⅱ)配合物的制备及液晶性质

金属配合物液晶的分子设计与合成,是近10年来液晶学科的一个新的研究领域^[1,2]. 文献已报道的过渡金属液晶配合物多为单核或同核,而异核过渡金属液晶的研究甚少。     

新型桥联双四面体簇合物的合成与表征

利用(μ₃-CCO₂Et)Co₃(CO)₉与单阴离子试剂[Mo(CO)₃(η⁵-C₅H₄R)]-[R=H,C(O)Me]的反应合成了2个新的含CCo₂Mo骨架的簇合物(μ₃-CCO₂Et)Co₂Mo(CO)₈(η⁵-C₅H₄R)[R=H(1);R=C(O)Me(2)],进而用其与双阴离子试剂{-M(CO)₃[η⁵-C₅H₄C(O)]}₂-1,4-C₆H₄[M=Mo,W]反应合成了4个双四面体簇合物{(μ₃-CCO₂Et)CoMoM(CO)₇(η⁵-C₅H₄R)[η⁵-C₅H₄C(O)]}₂-1,4-C₆H₄[M=Mo,R=H(3);M=Mo,R=C(O)Me(4);M=W,R=H(5);M=W,R=C(O)Me(6)].这6个化合物的C和H元素分析,IR,¹HNMR等表征都与其结构一致.晶体X射线衍射分析表明,化合物2属单斜晶系,C₂/c空间群,晶胞参数a=1.1264(3)nm,b=1.1879(3)nm,c=3.3565(10)nm,β=93.320(5)°,V=4.484(2)nm₃,Z=8,D_c=1.867g·cm^-3,F(000)=2480,R=0.0369,wR=0.1150.     

两个半夹心型聚吡唑硼酸盐羧酸钴配合物的合成、结构及催化活性

设计合成了2个结构新颖的半夹心单核聚吡唑硼酸盐羧酸配合物Tp^*Co(Hglu)(CH₃OH)(1)和Tp^*Co(Hsub)(H₂O)(2)[Tp^*=三聚(3,5-二甲基吡唑)硼酸根, H₂glu=戊二酸, H₂sub=辛二酸], 并通过元素分析、 红外光谱、 紫外-可见光谱和X射线单晶结构分析对标题配合物进行了表征. 结构分析表明, 在配合物1和2中, 配体Tp^*都是三齿配位, 配位模式相同; 戊二酸和辛二酸都以μ₁-η¹-η¹的端基配位模式与金属相连. 此外, 还对配合物的热稳定性进行了详细分析, 并初步探讨了配合物催化氧化环己烷的催化活性.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.