有机--无机纳米复合材料的制备方法

本文综述了无机--有机纳米复合材料的制备方法,介绍了其结构和性质,并展望了其应用前景.     

溶胶—凝胶法制备有机—无机纳米复合材料

溶胶－凝胶法以其温和的反应条件，尤其是低的反应温度成为有机－无机纳米复合材料制备的最有效的方法．本文根据合成路线的不同，分５个方面对用溶胶－凝胶法制备复合材料进行概要介绍．     

有机/无机纳米复合材料的研究进展

有机／无机纳米复合材料以其优异的性能越来越受到人们的关注。本文分析总结了有机／无机纳米复合材料的制备方法、性能及其应用,着重介绍了溶胶一凝胶法和原位聚合法。参考文献28篇。     

乳液聚合法制备纳米金/聚苯乙烯复合粒子

以氯金酸为前驱体,十二烷基硫醇和硼氢化钠分别作为稳定剂和还原剂,采用相转移法制备了单分散的金纳米粒子.将金纳米粒子通过乳液聚合的方法制备了纳米金/聚苯乙烯复合粒子.通过紫外-可见吸收光谱(UV-Vis)研究了纳米金和纳米金/聚苯乙烯复合粒子的光吸收特性,使用傅立叶变换红外光谱(FT-IR)、X射线衍射(XRD)、透射电子显微镜(TEM)和动态光散射(DLS)对产物的组成、晶体结构、形貌、以及粒径进行了表征.结果表明,复合粒子为粒径分布较窄的球形,其中的金纳米粒子为面心立方结构.热失重分析(TGA)说明制备的纳米金/聚苯乙烯复合粒子具有很好的热稳定性.     

纳米无机粒子/聚合物复合材料界面结构的研究

纳米粒子具有许多特性,聚合物中加入纳米粒子可以制备得到性能更加优异的复合材料,其中纳米粒子和聚合物基体间的界面对决定纳米复合材料的性能起着重要作用.本文综述了近些年来表征纳米无机颗粒/聚合物复合材料中界面结构的研究手段,如红外光谱(FTIR)、热重(TGA)、电子显微镜、小角中子散射(SANS)及小角X射线散射(SAXS)等,及界面结构与复合材料力学性能和热稳定性关系的研究进展.同时也介绍了纳米粒子对复合材料的渗透、光催化、阻燃、介电及导电性能的影响.最后对这一领域的研究进行了展望.     

无机/有机纳米复合材料的研究进展*

分析总结了聚合物基无机纳米复合材料的各种制备方法、性质及其应用, 并对今后的发展作了展望。     

乳液聚合法制备聚苯乙烯/Mg-Al层状双氢氧化物纳米复合材料

采用乳液聚合法制备阻燃性聚苯乙烯MgAl层状双氢氧化物(LDHs)纳米复合材料.通过对不同合成条件下复合材料的XRD谱,讨论了纳米复合材料的形成过程;经SEM图证实了LDHs是以剥离的纳米级层片分散在基体中的;TG和DSC谱图揭示了LDHs纳米层板可有效提高PS的热稳定性,并可使PS的玻璃化转化温度明显提高;当层状双氢氧化物在插层复合材料中含量为14.92%时,纳米复合材料的氧指数可达23.5%,其用量比在PS中直接添加纳米LDHs时要少约一倍.文中还分析了纳米复合材料的形成过程.     

乳液聚合法制备剥离型PS/MMT纳米复合材料

以阳离子表面活性剂十八烷基三甲基氯化铵(OTAC)和烯丙基十八烷基二甲基氯化铵(ATAC)为插层处理剂改性蒙脱土(MMT),原位乳液聚合分别制备了PS/C18MMT和PS/AC18MMT两种纳米复合材料.XRD和TEM分析表明,MMT均被剥离成单个或几个片层无规的分散在PS基体中,TGA分析表明,MMT的加入提高了材料的耐热性能,当PS基体与有机化处理的MMT片层发生一定的化学连接后,PS/AC18MMT纳米复合材料表现出更好的耐热性能.动态力学分析表明,MMT的加入提高了PS的玻璃态储能模量,降低了材料的动态损耗;PS/AC18MMT纳米复合材料的玻璃化温度较PS有所提高,而PS/C18MMT的玻璃化温度与PS相比略有降低.     

聚集诱导发光有机小分子无机纳米复合材料的研究进展

有机-无机复合荧光纳米材料制备简便,生物相容性好,成像性能优异,在化学和生物传感、生物成像、催化及能源材料等领域受到很多关注.传统的荧光有机小分子与无机材料复合时,常发生荧光猝灭,而聚集诱导发光(Aggregation-InducedEmission,AIE)有机小分子在聚集态具有高发光量子产率,为有机-无机复合荧光纳米材料的研究提供了机遇.由于AIE有机小分子功能化的无机纳米材料独特的优点,人们对其设计、合成及应用进行了较多研究.综述了AIE有机小分子和多种类型的无机纳米结构(金属纳米颗粒、钙钛矿材料、层状材料、氧化物、硫化物等)复合材料的制备和应用的新进展,特别是在化学和生物传感、生物成像、药物输运、光热治疗、催化以及能源等领域的应用,并对其发展前景进行了展望.     

在无机SiO2纳米粒子存在下的苯丙乳液共聚合

研究了在无机SiO₂纳米粒子存在下的苯丙乳液共聚合.选择了能使苯丙乳液稳定存在的乳化剂体系,研究了温度和SiO₂的加入对聚合过程转化率的影响,结果表明,SiO₂的加入对聚合过程有阻聚作用,使单体的转化率降低.SEM照片证明SiO₂粒子已经进入苯丙乳液粒子中,而且SiO₂的加入对乳液制成的膜断面形态有一定影响.实验发现在无机SiO₂纳米粒子存在下,苯丙乳液共聚合时有较多残渣出现,对此通过改进乳液聚合进行了有效地改善.同时对制成的复合材料进行了力学性能和热学性能的测定.     

High Solids Content Waterborne Acrylic/Montmorillonite Nanocomposites by Miniemulsion Polymerization

Waterborne polymer/clay nanocomposites of methyl methacrylate and butyl acrylate have been prepared by miniemulsion polymerization. Two different commercial organically modified clays have been used: Cloisite 15A and Cloisite 30B. Nanocomposites with partially exfoliated structure, observed by wide‐angle X‐ray diffraction (WAXD), small angle X‐ray scattering (SAXS) and transmission electron microscopy (TEM) were obtained by batch miniemulsion polymerization with 2–4 wt.‐% clay and 30% solids content. The mechanical, thermal and permeation properties of the nanocomposites showed a substantial improvement. Furthermore, this approach has allowed the production of stable and coagulum free latex with solids content up to 42 wt.‐% with partially exfoliated structures.

     

Phosphate‐Loaded Hydrogel Nanoparticles for Sepsis Prevention Prepared via Inverse Miniemulsion Polymerization

Local depletion of intestinal phosphate triggers changes in bacterial phenotypes that adversely affect the health of the host. This article describes a process for encapsulating phosphates in crosslinked poly(ethylene glycol) diacrylate (PEGDA) nanoparticles using inverse miniemulsion polymerization as a drug delivery approach for sustained release of phosphates to the intestinal epithelium. The effects of crosslinker, PEGDA co‐monomer, N‐vinyl pyrrolidone, (NVP) and surfactant concentrations on the nanoparticle size distribution, swelling ratio and monomer conversion are investigated. Increased surfactant and PEGDA concentrations result in smaller particle size and swelling ratio. A copolymerization model of crosslinking is used to predict conversion and gelation dynamics as a function of polymerization conditions. The model assumes that bulk polymerization can be used to approximate inverse miniemulsion polymerization with an aqueous‐phase initiator. The initiator efficiency is used as an adjustable parameter to simulate the conversion dynamics, thus accounting for radical confinement effects and interaction with emulsifier molecules.     

Evaluation of Organically Modified Layered Double Hydroxides as Fillers for the Preparation of Polymer Nanocomposites in Miniemulsion Polymerization

Latexes of poly(n‐butyl acrylate‐co‐methyl methacrylate) [P(BA‐co‐MMA)] filled with magnesium–aluminum layered double hydroxides (MgAl‐LDHs) are synthesized using miniemulsion polymerization. Three commercial LDHs organically modified with different types of anions are used as fillers (Perkalite F100S, Perkalite A100, and Perkalite AF50) and three different types of surfactants are tested to stabilize the miniemulsions including a cationic, an anionic, and a nonionic one. Stable LDH‐containing miniemulsions are prepared with a mixture of sodium dodecyl sulfate and Triton X‐405 and the polymerizable co‐stabilizer octadecyl acrylate. They are then polymerized to yield nanocomposite latexes. Depending on the type of LDH used, the presence of the inorganic material in the reaction medium affects the polymerization kinetics. X‐ray diffraction analysis of the resulting nanocomposite films suggests exfoliation of the inorganic material. The glass transition temperature of the nanocomposites is not affected by the LDHs and the decomposition temperature of the nanocomposites determined by thermogravimetric analysis is greater than that of the pure polymer.     

表面引发原子转移自由基聚合法合成无机/有机核壳复合纳米粒子

原子转移自由基聚合(ATRP)是目前为止最具工业化应用前景的活性/可控自由基聚合方法之一,其最大特点是可以得到分子量分布窄、链结构规整的聚合物,而且可聚合的单体种类多,反应条件温和并易控制。表面引发ATRP(SI-ATRP)特别适合于无机材料表面接枝聚合物或无机/有机复合材料的制备,近年来引起了国内外研究者的高度关注。本文首先对SI-ATRP的反应过程与特点做了阐述,然后重点述评了用SI-ATRP法合成以非金属氧化物纳米粒子、金属氧化物纳米粒子、金属纳米粒子或其他无机纳米粒子为核的无机/有机复合纳米粒子的研究进展,最后对未来用SI-ATRP法合成无机/有机复合纳米粒子的发展方向和研究前景进行展望。     

基于细乳液聚合的纳米颗粒制备与应用研究进展-撤稿（Withdrawed）

细乳液聚合能够将多种材料封装在聚合物壳层中形成结构复杂的聚合物纳米颗粒。 与普通乳液聚合技术相比,细乳液聚合具有方便、环保、粒径可控、稳定性高等优点。 通过引入功能单体,可以很容易地实现对纳米颗粒的功能化。 目前,细乳液聚合技术已经应用于很多领域,如纺织颜料的合成、粘接剂、分子印迹、磁性靶向纳米颗粒等。 本文综述了近年关于细乳液聚合法合成纳米颗粒的各种应用。     

Hybrid Miniemulsion Polymerization of Acrylate/Oil and Acrylate/Fatty Acid Systems

Acrylate–alkyd hybrid latex via miniemulsion polymerizations show promise as water‐borne coating systems. However, poor homogeneity of the particles caused by the immiscibility of the alkyd in polyacrylate limits monomer conversion and film formation. To resolve this problem, the hybrid miniemulsion polymerization of acrylate in the presence of linoleic acid and sunflower seed oil was carried out. Products were characterized by solvent extraction, dynamic light scattering, gel permeation chromatography (GPC), differential scanning calorimeter (DSC), and transmission electron microscopy (TEM). The results provide clear evidence that substituting a fatty acid or natural oil with smaller molecular size (weight) for a conventional alkyd improves the grafting efficiency, and enhances the homogeneity of the hybrid polymer particles in water‐borne latex systems.

     

Preparation of PMMA Nanoparticles Loaded with Benzophenone-3 through Miniemulsion Polymerization

Summary: The present paper analyzes the production of poly(methyl methacrylate) – PMMA – nanoparticles loaded with benzophenone-3 through miniemulsion polymerization. The obtained product is homogeneous and stable, allowing for preparation of photo-protective formulations. It is observed in particular that bezophenone-3 interacts with the reacting system, promoting the growth of the PMMA chains produced in miniemulsion.