About mechanism of foam stabilization by solid particles

The main objective of the research was to study the properties of the foam and foam films stabilized by solid particles. The properties of the foam films were compared with the analogous ones of the emulsion films. The experiment provided the rheological characteristics of the dispersion medium. The research provided the study of the correlation of the contact angle, the shear stress, the surface tension and the radii of aggregates by the solid particles and the modifier concentration. The effect of the foam film stabilization by the solid particles is significant.     

Interfacial shear rheology of protein-surfactant layers

The shear rheology of adsorbed or spread layers at air/liquid and liquid/liquid phase boundaries is relevant in a wide range of technical applications such as mass transfer, monolayers, foaming, emulsification, oil recovery, or high speed coating. Interfacial shear rheological properties can provide important information about interactions and molecular structure in the interfacial layer. A variety of measuring techniques have been proposed in the literature to measure interfacial shear rheological properties and have been applied to pure protein or mixed protein adsorption layers at air/water or oil/water interfaces. Such systems play for example an important role as stabilizers in foams and emulsions. The aim of this contribution is to give a literature overview of interfacial shear rheological studies of pure protein and protein/surfactant mixtures at liquid interfaces measured with different techniques. Techniques which utilize the damping of waves, spectroscopic or AFM techniques and all micro-rheological techniques will not discuss here.     

Rheological Behavior of Titanium Dioxide Suspensions

The rheological properties of titanium dioxide dispersed in water are measured over a wide range of powder concentrations, temperatures, and pH values. The value of intrinsic viscosity of titanium dioxide measured with an Ubbelohde capillary viscometer is 3.55, which is useful for determining the shape and aggregation property of the particles. The yield stress and steady shear viscosity of titanium dioxide with broad and narrow particle size distributions were measured over a wide range of solid volume fractions on a Brabender rheometer. It is observed that the rheological properties of the suspensions are quite different due to the difference in particle size distributions. Quemada, Casson, and Zhou's models were used to fit the experimental data and useful parameters were obtained. Calculated data are also in good agreement with the experimental data. As expected, the shear viscosity and yield stress decrease with increasing temperature. But when the temperature is around 50 degrees C, yield stress increases with increasing temperature while shear viscosity exhibits a complex behavior. The phenomena are very interesting and special. The Peclet number was used to analyze the shear thickening behavior. Models were also used to describe the shear viscosity under different temperatures and the master plots of the reduced variables eta/eta(infinity) vs t(c)gamma; at different temperatures are superimposed, which means the agreement is fair and the models are suitable to describe the rheological properties of titanium dioxide suspensions. pH effects were investigated on a Rheometrics RFS-II rheometer and it was found that pH can change the surface charge of the particles, which also affects the rheological behavior. The pH at which maximum shear viscosity and yield stress occur is in concordance with the isoelectric point. Copyright 2001 Academic Press.     

Stability of thin stagnant film on a solid surface with a viscoelastic air-liquid interface

Linear stability analysis for a film on a solid surface with a viscoelastic air-liquid interface is presented. The interfacial dilatational and shear viscoelastic properties were described by Maxwell models. Dilatational and shear interfacial elasticity and viscosity were shown to improve film stability. When the interfacial rheological properties are extremely large or small, the maximum perturbation growth coefficient is shown to reduce to those for immobile and mobile interfaces respectively. Calculated values of maximum growth coefficient for thin film stabilized by 0.5% beta-lactoglobulin approached those of mobile films for thick (>2000 nm) and those for immobile films for thin (<100 nm) films respectively with the values lying between the two limits for intermediate film thicknesses.     

Modifying the liquid/liquid interface: pores, particles and deposition

The modification of the liquid/liquid interface with solid phases is discussed in this article. Modified interfaces can be formed with molecular assemblies, but here attention is focussed on solid materials such as mesoscopic particles, or microporous and mesoporous membranes. Charge transfer across the modified liquid/liquid interface is considered in particular. The most obvious consequence of the introduction of such modifying components is their effect on the transport to, and the transfer of material across, the liquid/liquid interface, as measured voltammetrically for example. One particularly interesting reaction is interfacial metal deposition, which can also be studied under electrochemical control: the initial formation of metal nuclei at the interface transforms it from the bare, pristine state to a modified state with very different reactivity. Deposition at interfaces between liquids is compared and contrasted with the cases of metal deposition in bulk solution and conventional heterogeneous deposition on conducting solid surfaces. Comparison is also made with work on the assembly of pre-formed micron and nanometre scale solids at the liquid/liquid interface.     

In-situ infrared spectroscopic studies of adsorption processes on boehmite particle films: exchange of surface hydroxyl groups observed upon chelation by acetylacetone

Adsorption processes on poorly crystalline boehmite (PCB) particle films have been studied using attenuated total reflection infrared spectroscopy. This method allows the in-situ investigation of wet surface chemical processes. Thin films of aggregated particles of PCB that are stable between pH 4 and 11 have been prepared by drying aqueous PCB dispersions. Carbonate adsorbs to the PCB films during the film formation process but can be removed without impact on the film by washing with alkali at pH 10. The adsorption of acetylacetone (acac) to the surface of PCB has been studied at the solid/liquid and solid/gas interfaces. The concomitant changes in the OH deformations of hydroxyl groups present on the surface has been observed. The IR absorption of surface hydroxyl groups involved in adsorption of a bidentate chelating ligand have been spectroscopically isolated through their interaction with acac.     

Dynamic interactions between approaching surfaces of biological interest

The dynamic interactions arising when two interfaces approach each other are reviewed. Experimental methods are summarized and briefly discussed. The basic physical laws describing the dynamic behavior of interfaces and the liquid film between them are presented and the thin film approximation is used in order to simplify them. It was shown that interface deformability decreases the approach rate (increases interaction) while surface tangential mobility and membrane permeability increase it. Formulae are also presented for the dynamic interactions between solid particles of different shapes. The influence of the rheological properties of the liquid film between approaching surfaces is considered using viscoelastic, liquid-crystalline and non-linear models. The interactions between surface shape perturbations which are important for liquid film stability are considered with special attention to the case of membranes. A hydrodynamic theory of bilayer membrane formation and some similar phenomena is described which coincides semi-quantitatively with available experimental data. It is pointed out that viscous interactions can significantly decrease the rate of aggregation and fusion in multiparticle systems. The influence of external fields is also briefly discussed. The general conclusion is that in any case of very close approach of two interfaces the dynamic interactions can significantly increase leading to a decrease in the rate of adhesion and fusion.     

Lattice Boltzmann simulation of particles agglomeration and rheology in a particulate flow

The dynamics and rheology of particles in a Newtonian fluid subjected to shear are simulated using Lattice Boltzmann Method. A computationally-efficient Smoothed Profile Method is used to resolve fluid-solid interactions, and the Lennard-Jones inter-particle potential is implemented to account for inter-particle forces. The use of a bi-periodic computational domain with Lees-Edward boundary conditions allows simulation for systems consisting of a large number of particles under shear. The method is validated for single and dual particle problems and an analysis is performed for multi-particle problems under a range of shear rates and particle fractions. The introduction of particle-particle interactions, which are physically important in many engineering processes, is found to have a considerable impact on the dynamics, agglomeration and rheology. The total stress exhibits high unsteadiness primarily due to the solid component contribution, at higher particle fractions. The simulations underscore the complex interplay between shear, interparticle forces and agglomeration and the complex dependencies of the rheological properties.     

在介观尺度研究多相复杂流体——四辊流变仪及其应用

研究多相复杂流体的流变学需要介观尺度下基本力学过程的信息.四辊流变仪可以产生旋转、剪切、拉伸等多种流场,且在流场中心形成一个停滞点,适于实时观察和测量介观尺度范围内与基质不相容的液滴的形变、破裂和聚并,或纤维、固体粒子、液晶等与液体组成的多相复杂流体的流变性质,还可以和多种仪器联用进一步扩展应用范围.本文综述了四辊流变仪的发展、主要部件、理论基础、用途以及应用四辊流变仪所做的主要研究,最后与其它流变仪器加以比较并总结了它的优缺点.     

Tailoring the interfacial assembly of colloidal particles by engineering the mechanical properties of the interface

Fluid interfaces can be used as a platform for promoting the direct and spontaneous self-assembly of colloidal particles, where the driving force is the reduction in interfacial energy. In addition, fluid interfaces allow fine-tuning of the particles ensemble by an external force, such as the presence of an imposed interfacial flow, or by engineering the interparticle interactions dictated by the interplay of interfacial forces. As a consequence, a wide-ranging set of interfacial structures can be achieved from liquid-like layers, which can flow under stress, to amorphous solids that are able to sustain static stress. Here, far from a comprehensive overview of the interfacial assembly of colloidal particles, different ways of tailoring it by rationally designing the rheological properties of the interface are provided, with a focus on experimental and theoretical methods and model systems that have been recently exploited. In particular, ligand-coated nanoparticles, with a strong emphasis on the effect of the ligands on the interfacial structure and the rheological properties, and soft nanogel particles, in which an environmental factor, such as the temperature, drives to different interfacial structures and mechanical responses will be further discussed.     

Aqueous Dispersions of Positively Charged Al/Mg Mixed Metal-Hydroxide Particles:Surface Chemistry and Rheological Properties

The solids concentration, pH and NaCl were found to have a very significant effect on the rheological properties of aqueous dispersions of positively charged Al-Mg mixed metal hydroxide particles (Al-Mg MMH). At low solids concentrations the flow curves of the dispersions at natural pH followed the Newtonian model very well in the observed range of shear rate, while at high solids contents the dispersions developed a yielding type of response, with yield stress increasing rapidly as solids concentration increases. The variation in rheological properties with pH and NaCl contents correlated well with the change in surface properties of Al-Mg MMH particles. Al-Mg MMH dispersions with maximum yield stress occurred near the isoelectric point (IEP) where the Zeta potential (or electrophoretic mobility) is zero. At the IEP, the shear yield stress decreased monotonously in magnitude as a function of the increasing NaCl concentration, which is in contrast to the increment in the yield stress observed below the DEP at NaCl concentrations less than 0.1 mol dm^-3. At low NaCl concentrations, significant shear yield stress differences exist at and below the IEP. By contrast, at high NaCl concentrations, almost identical shear yield stress versus NaCl results are obtained in both cases.     

Model filled rubber. II. Particle composition dependence of suspension rheology

Monodisperse size colloidal particles varying in chemical composition were synthesized by emulsifier‐free emulsion polymerization. Using a stress‐controlled rheometer, the rheological behavior of colloidal suspensions in a low molecular weight liquid polysulfide was investigated. All suspensions exhibited shear thinning behavior. The shear viscosity, dynamic moduli, and yield stress increased as interactions between particles and matrix increased. The rheological properties associated with network buildup in the suspensions were sensitively monitored by a kinetic recovery experiment. We propose that interfacial interactions by polar and hydrogen bonding between particles and matrix strongly promote affinity of matrix polymer to the filler particles, resulting in adsorption or entanglement of polymer chains on the filler surface. A network structure was formed consisting of particles with an immobilized polymer layer on the particle surface with each particle floc acting as a temporary physical crosslinking site. As the interfacial interaction increases, the adsorbed layer thickness on the filler particles, hence, the effective particle volume fraction, increases. As a result, the rheological properties were enhanced in the order PS < PMMA < PSVP. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 815–824, 1999     

胶体颗粒稳定的界面及胶体颗粒在界面的相互作用

Particle-stabilized dispersions such as emulsions, foams and bubbles are catching increasing attentions across a number of research areas. The adsorption mechanism and role of these colloidal particles in stabilizing the oil-water or gas-water interfaces and how these particles interact at interfaces are vital to the practical use of these dispersion systems. Although there have been intensive investigations, problems associated with the stabilization mechanisms and particle-particle interactions at interfaces still remain to explore. In this paper, we first systematically review the historical understanding of particle-stabilized emulsions or bubbles and then give an overview of the most important and well-established progress in the understanding of particle-stabilized systems, including emulsions, foams and liquid marbles. The particle-adsorption phenomena have long been realized and been discussed in academic paper for more than one century and a quantitative model was proposed in the early 1980s. The theory can successfully explain the adsorption of solid particles onto interface from energy reduction approaches. The stability of emulsions and foams can be readily correlated to the wettability of the particles towards the two phases. And extensive researches on emulsion stability and various strategies have been developed to prepared dispersion systems with a certain trigger such as pH and temperature. After that, we discuss recent development of the interactions between particles when they are trapped at the interface and highlight open questions in this field. There exists a huge gap between theoretical approaches and experimental results on the interactions of particles adsorbed at interfaces due to demanding experimental devices and skills. In practice, it is customary to use flat surfaces/interfaces as model surfaces to investigate the particle-particle at interfaces although most of the time interfaces are produced with a certain curvature. It is shown that the introduction of particles onto interfaces can generate charges at the interfaces which could possibly account for the long range electrostatic interactions. Finally, we illustrate that particle-stabilized dispersions have been found wide applications in many fields and applications such as microcapsules, food, biomedical carriers, and dry water. One of the most investigated areas is the microencapsulation of actives based on Pickering emulsion templates. The particles adsorbed at the interface can serve as interfacial stabilizers as well as constituting components of shells of colloidal microcapsules. Emulsions stabilized by solid particles derived from natural and bio-related sources are promising platforms to be applied in food related industries. Emulsion systems stabilized by solid particles of the w/w (water-in-water) feature are discussed. This special type of emulsion is attracting increasing attentions due to their all water features. Besides of oil-water interface, particle stabilized air-water interface share similar stabilization mechanism and several applications reported in the literature are subsequently discussed. We hope that this paper can encourage more scientists to engage in the studies of particle-stabilized interfaces and more novel applications can be proposed based on this mechanism     

Methods of measuring rheological properties of interfacial layers (Experimental methods of 2D rheology)

Current methods of studying the rheological properties of interfacial layers at the interfaces of fluids are reviewed. This area of research includes two-dimensional 2D rheology. Regardless of the similarities between the parameters of rheological properties of two-dimensional and bulk (three-dimensional) systems, when measuring surface properties, it is necessary to reformulate the main experimental methods to allow for the different dimensions of surface and bulk characteristics of material. Parameters of shear and dilational (measured upon expansion-compression) properties of interfacial layers are distinguished, and the latter are considered to be independent parameters of a system. The most attention was given to the rotational methods of measuring shear viscosity and the components of the complex 2D elastic modulus, as well as to measuring surface tension upon harmonic changes of the bubble (droplet) surface area, which allows characteristics of the dilational behavior of thin liquid films to be determined. Both groups of methods are widely used in laboratory practice and realized in the form of a number of original and commercial instruments. Dilational measurements of interfacial layers can also be performed with oscillations of a movable barrier on a Langmuir trough. In addition, methods based on the propagation of capillary waves across the surface of a liquid, as well as rarer methods of capillary flow in thin channels forced by either a surface tension gradient or the motion of the interface, are considered.     

Morphological studies of liquid-crystalline cellulose derivatives. II. Hydroxypropyl cellulose films prepared from liquid-crystalline aqueous solutions

A morphological study of hydroxypropyl cellulose (HPC) was performed on solid films prepared by casting from a liquid-crystalline aqueous solution at rest or under shear. Electron microscopic observations reveal that many round particles composed of stacked disks are densely packed in the interior of a quiescently cast HPC film, while on the film surface formation of fibrous textures is also noted. Shear-deformed HPC films exhibit some interesting morphological features according to the shearing conditions. It is found by electron microscopy that the originally round particles become more and more elongated as shear stress increases. The resulting rodlike fibrillar entities are considerably aligned in the shear direction (SD), but form a banded structure with periodic discontinuities of molecular orientation distribution along the SD. A new mechanism of structural transformation is proposed in order to interpret these results.     

Some applications of the AMPC model of the shear yield stress of particulate fluids

The AMPC structural model of shear yield stress of single component suspensions is extended to three important rheological phenomena encountered in particulate fluids. These are shear yield stress of multi-component systems, time dependent shear yield stress of thixotropic suspensions, and compressive yield stress of particulate fluids. The shear yield stress of multi-component suspensions is modeled by summing the interparticle interactions due to all possible combinations of particle sizes and solid constituents. The time dependent shear yield stress of thixotropic muds is simulated by invoking the proportionality between yield stress and interparticle bond density across the shear plane. The compressive yield stress of particulate fluids is calculated by assuming that consolidation occurs by shear but at a narrower gap between the particles. The ability of the model to describe these diverse phenomena reasonably well seemingly validates its basic premise, namely, a 3-dimensional space-filling network of particles whose mechanical properties can be estimated from the theory of strength of particulate assemblage.     

Molecular simulation of fluid-solid interfaces at nanoscale

The equilibrium states of vapor and liquid coexistent phases in contact with a solid surface are studied at the nanoscale by molecular dynamics simulations for a temperature close to the fluid triple point. The characteristics of the solid-fluid interfaces are determined when the interaction strength between the fluid and the solid varies in order to go from a situation of complete drying to that of complete wetting. From the vapor-liquid density profiles of liquid drops lying on the substrate surface or menisci of liquid films confined in slit pores, the contact angles made by the vapor-liquid interface with the solid are computed. The angle values are similar for the drops and the films. They are also in good qualitative agreement with the estimates obtained through the Young's relation from the surface tensions associated with the vapor-solid, liquid-solid, and vapor-liquid interfaces. However, at this scale, the uncertainties inherent to the angle computation and, to a lesser extent, to size effects seem to preclude that the quantitative agreement between the angle estimates obtained from the interface geometry and calculated from the Young's relation can be better than few degrees.     

Stress jumps on weakly flocculated dispersions: steady state and transient results

Weakly flocculated, thixotropic suspensions have been investigated by means of fast stress jump experiments. With a suitable procedure, reliable stress relaxation data could be collected starting 20 ms after cessation of flow. This technique has been used to determine the elastic and hydrodynamic contributions to the shear stress. Steady state as well as transient flows have been studied for suspensions containing either fumed silica or carbon black particles in a Newtonian medium. In both systems, the elastic stress totally dominates the response at low shear rates and consequently also the apparent yield stress. This stress contribution becomes negligibly small at high shear rates. The hydrodynamic contribution to the viscosity has finite limits at both the low and high shear rate ends. The data are relevant for testing rheological models. As an illustration, it is shown that the data agree qualitatively with the model proposed by Potanin et al. (J. Chem. Phys. 102 (14) (1995) 5845-5853).     

Sorbitan tristearate layers at the air/water interface studied by shear and dilatational interfacial rheology

The shear and dilatational rheology of condensed interfacial layers of the water-insoluble surfactant sorbitan tristearate at the air/water interface is investigated. A new interfacial shear rheometer allows measurements in both stress- and strain-controlled modes, providing comprehensive interfacial rheological information such as the interfacial dynamic shear moduli, the creep response to a stress pulse, the stress relaxation response to a strain step, or steady shear curves. Our experiments show that the interfacial films are both viscoelastic and brittle in nature and subject to fracture at small deformations, as was supported by in-situ Brewster angle microscopy performed during the rheological experiments. Although any large-deformation test is destructive to the sample, it is still possible to study the linear viscoelastic regime if the deformations involved are controlled carefully. Complementary results for the dilatational rheology in area step compression/expansion experiments are reported. The dilatational behavior is predominantly elastic throughout the frequency spectrum measured, whereas the layers exhibit generalized Maxwell behavior in shear mode within a deformation frequency regime as narrow as two decades, indicating the presence of additional relaxation mechanisms in shear as opposed to expansion/compression. If the transient rheological response from stress relaxation experiments is considered, then the data can be described well with a stretched exponential model both in the shear and dilatational deformations.     

Viscoelastic properties of decrosslinked irradiation‐crosslinked polyethylenes in supercritical methanol

The viscoelastic properties of decrosslinked irradiation‐crosslinked polyethylenes using a supercritical methanol were investigated via oscillatory dynamic shear measurements. Decrosslinked polymers at a low reaction temperature exhibited solid‐like rheological properties, as evidenced by a small slope at G′ and G″, a long relaxation time, slow stress relaxation behavior, and considerable yield stress. In contrast, decrosslinked polymers at a high temperature exhibited liquid‐like rheological properties that included a large slope in G′ and G″, a short relaxation time, fast stress relaxation behavior, and nonyield stress. The difference in the viscoelastic properties of the decrosslinked polyethylenes was attributed to the difference in the gel content with the reaction temperature. A higher gel content induced stronger solid‐like viscoelastic properties. Hence, the rheological measurements were useful for analyzing the molecular structure of decrosslinked polymers using a supercritical fluid. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1265–1270, 2010