Surface forces in wetting films

A short review of various components of surface forces acting in a non-symmetrical system such as wetting films is presented here. Experimental results are compared with modified DLVO theory, which includes, besides dispersion and electrostatic, structural (solvation) forces caused by a change in liquid structure in conditions of confined geometry. The peculiarities of disjoining pressure isotherms and conditions of the film stability of non-polar and polar simple liquids, as well as of aqueous solutions of electrolytes and surfactants, are systematically considered from a historical perspective.     

Alkane films on water: stability and wetting transitions

Types of surface forces determining the disjoining pressure isotherms of wetting films of low-molecular-weight alkanes on water surface are discussed. The van der Waals forces in alkane interlayers at different temperatures were calculated using a combination of exact equations of the Dzyaloshinsky—Lifshitz—Pitaevsky macroscopic theory and the multi-oscillator model for representation of the dielectric permittivity spectra of contacting bodies. Taking account of competitive action of the van der Waals and image forces allows one not only to reproduce specific features of wetting in the systems studied at different temperatures, but also to describe quantitatively the contact angles and the experimentally observed isotherms of polymolecular adsorption. The experimentally detected wetting transition in the water—pentane—vapor system was rationalized using the results of calculations mentioned above and the Derjaguin—Frumkin theory of wetting. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 256–266, February, 2008.     

Recent developments in the properties and applications of polyelectrolyte multilayers

Complexity and innovation in the application of layer-by-layer adsorbed polyelectrolyte systems continues to grow. In this review, we will recap recent findings on the application of multilayers at the biological interface, and as thin films for controlling wetting properties. We also review recent experiments on determining the mechanical properties of polyelectrolyte multilayers.     

Pyrolysis and film growth studies of phosphinoborane compounds

Chemical vapor deposition experiments were conducted using phosphinoborane compounds of the type [R₂BPR′₂]_n, where R = CH₂CH₃ (1) or CH₃ (2), R′= C(CH₃)₃, and R = CH₂CH₃ (3) or CH₃ (4), R′ = Si(CH₃)₃. Thin films were deposited on Si substrates at 300–850°C under vacuum using 1–3, while no film formed using 4. All films contained considerable carbon (C/B = 0.67–7) and were deficient in phosphorus (P/B = 0-0.5) according to Auger electron spectroscopy. For 3, silicon was incorporated in the films (Si/B = 0.9–2). The preferential loss of phosphorus was nearly complete at higher pyrolysis temperatures that favor formation of carbon-rich films. Volatile products of the decompositions were observed by in situ mass spectroscopy and by ¹H nuclear magnetic resonance analysis of the condensate in a liquid nitrogen cooled trap. The products indicate that β-hydrogen elimination of alkene from boron is a preferred reaction pathway, while concerted elimination reactions appear to be inefficient. Although these phosphinoborane compounds do not appear to be suitable precursors for pure boron phosphide, the B-P-C films obtained are chemically inert and may be of interest as protective coatings.     

Effect of double-layer repulsion on foam film drainage

This paper presents an experimental validation of new theoretical development for foam film drainage, which focuses on the role of surface forces. The drainage of microscopic foam films (with radii smaller than 100 μm) from aqueous solutions of 10⁻⁶ to 10⁻⁴ mol/L sodium dodecyl sulphate (SDS) was studied by means of an improved Scheludko micro-interferometric technique which consisted of a conventional Scheludko cell, a high-speed camera system, and the software for digital analysis Optimas used for the digitisation of the interferometric images to obtain the monochromatic light intensity. The experimental technique allowed fast processing of the interferometric data for determining the transient film thickness with high accuracy. The zeta-potential of the air–water interface was determined from the electrophoretic mobility of micro-bubbles in SDS solutions of the same concentrations. Advanced predictions for the electrical double-layer repulsion at either constant surface potential or constant surface charge were employed. Significant discrepancy between the theoretical prediction and the experimental data was obtained. The analysis showed that the adsorption layer, which is located on the film surfaces, is far away from equilibrium, while the theory assumes condition close to equilibrium. In this term the interaction between the film surfaces is affected by the dynamics of the adsorption layers during the film drainage.     

Wetting and surface forces

In this review we discuss the fundamental role of surface forces, with a particular emphasis on the effect of the disjoining pressure, in establishing the wetting regime in the three phase systems with both plane and curved geometry. The special attention is given to the conditions of the formation of wetting/adsorption liquid films on the surface of poorly wetted substrate and the possibility of their thermodynamic equilibrium with bulk liquid. The calculations of contact angles on the basis of the isotherms of disjoining pressure and the difference in wettability of flat and highly curved surfaces are discussed. Mechanisms of wetting hysteresis, related to the action of surface forces, are considered.     

Direct measurement of molecular interaction forces in foam films from lung surfactant fraction

Molecular interaction forces, operative in microscopic foam films obtained from the isolated hydrophobic fractions of porcine lung surfactant (AS-B) are investigated by monitoring film thickness h as a function of electrolyte concentration (C _el) and direct measurements of disjoining pressure/thickness (Π(h)) isotherms. The steep decrease of the common film thickness with the increase of C _el evidences the action of long-range electrostatic surface forces. The experimental h(C _el) curve indicates that non-Derjaguin-Landau-Verwey-Overbeek (DLVO) repulsive forces are operative at C _el where common black (CBF) and Newton black films (NBF) are obtained including the physiologically relevant C _el=0.14 mol dm⁻³ NaCl. The action of additional non-DLVO forces is corroborated by the comparison of the experimentally measured Π(h) isotherm with the DLVO theory. Considering the presence of proteins in AS-B and the formation of lipid-protein complexes it is inferred that steric type forces are operative in CBF and NBF.     

Influence of the type of foam films and the type of surfactant on foam stability

The behaviour and the life time ( _p) of different types of foam films (thin liquid films, for which DLVO-theory is valid; common black films, Newton black films) have been studied as a function of external pressure (P), applied in the Plateau-Gibbs-borders of the foam. The foam stability and the course of thep/P-dependence are determined mainly by the type of the foam films. A criterion for estimation of foam stability is proposed on the base of the obtained experimental results.     

Effect of surfactants on the stability of thin liquid film flow on a rotating disk

The effect of surfactants on surface instabilities of thin liquid film flow on a rotating disk was studied at different flow rates Q (0.5相似文献   

Recent advances in antimicrobial surfaces via tunable molecular interactions: Nanoarchitectonics and bioengineering applications

Infections can lead to severe health issues, even death. Surfaces, such as those of biomedical devices, implants, textiles, tables and doorknobs, play a crucial role as carriers for pathogens to migrate, attach and proliferate. Implementing surfaces with antimicrobial properties offers a reliable and long-lasting approach to combat surface transmission of germs, minimize microbial colonization, and reduce infections. In this review, we present recent advancements in antimicrobial surfaces, categorized into four groups based on their action mechanisms: antifouling, bactericidal, antifouling and bactericidal, and dynamic or stimuli-responsive surfaces. The work highlights the fabrication processes and properties of each category, along with discussing their structure-performance relationships. Special attention is given to various anchoring strategies involving tunable molecular interactions. The review also introduces relevant biomedical applications.     

A review of developments and applications of thin‐film microextraction coupled to surface‐enhanced Raman scattering

Surface‐enhanced Raman scattering (SERS) greatly expands the applications of Raman spectroscopy and is a promising technique for food safety, environmental analysis, and public safety. Thin‐film microextraction (TFME) provides an efficient sample preparation method for SERS to improve its selectivity and detection efficiency. This review comprehensively describes the development and applications of SERS and TFME, including the history, mechanisim, and active substrate of SERS and the theory, device, forms, and practical applications of TFME. The applications of TFME‐SERS in food safety and environment monitoring are discussed, which could improve their advantages. TFME extracts and enriches the target analytes to eliminate the interfering substance, providing a facial way for SERS to analyze the target analytes in complex matrices. The development of TFME‐SERS technology not only expands the application range of TFME, but greatly improves the anti‐interference ability and detection sensitivity of SERS. Thus, the established methods are fast, convenient, and highly sensitive. This technology is potential to be applied in the on‐site and real‐time detection.     

Vibrational spectroscopy for probing molecular-level interactions in organic films mimicking biointerfaces

Investigation into nanostructured organic films has served many purposes, including the design of functionalized surfaces that may be applied in biomedical devices and tissue engineering and for studying physiological processes depending on the interaction with cell membranes. Of particular relevance are Langmuir monolayers, Langmuir–Blodgett (LB) and layer-by-layer (LbL) films used to simulate biological interfaces. In this review, we shall focus on the use of vibrational spectroscopy methods to probe molecular-level interactions at biomimetic interfaces, with special emphasis on three surface-specific techniques, namely sum frequency generation (SFG), polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and surface-enhanced Raman scattering (SERS). The two types of systems selected for exemplifying the potential of the methods are the cell membrane models and the functionalized surfaces with biomolecules. Examples will be given on how SFG and PM-IRRAS can be combined to determine the effects from biomolecules on cell membrane models, which include determination of the orientation and preservation of secondary structure. Crucial information for the action of biomolecules on model membranes has also been obtained with PM-IRRAS, as is the case of chitosan removing proteins from the membrane. SERS will be shown as promising for enabling detection limits down to the single-molecule level. The strengths and limitations of these methods will also be discussed, in addition to the prospects for the near future.     

Thin wetting films from aqueous solutions of surfactants and phospholipid dispersions

The microscopic thin wetting film method was used to study the stability of wetting films from aqueous solution of surfactants and phospholipid dispersions on a solid surface. In the case of tetradecyltrimethylammonium bromide (C(14)TAB) films the experimental data for the receding contact angle, film lifetime, surface potential at the vapor/solution and solution/silica interface were used to analyze the stability of the studied films. It is shown that with increasing C(14)TAB concentration charge reversal occurs at both (vapor/solution and solution/silica) interfaces, which affects the thin-film stability. The spontaneous rupture of the thin aqueous film was interpreted in terms of the earlier proposed heterocoagulation mechanism. The presence of the mixed cationic/anionic surfactants was found to lower contact angles and suppresses the thin aqueous film rupture, thus inducing longer film lifetime, as compared to the pure amine system. In the case of mixed surfactants hetero-coagulation could arise through the formation of ionic surfactant complexes. The influence of the melting phase-transition temperature T(c) of the dimyristoylphosphatiddylcholine (DMPC) on the stability of thin films from dispersions of DMPC small unilamellar vesicles on a silica surface was studied by measuring the film lifetime and the TPC expansion rate. The stability of thin wetting films formed from dispersions of DMPC small unilamellar vesicles was investigated by the microinterferometric method. The formation of wetting films from diluted dispersions of DMPC multilamellar vesicles was studied in the temperature range 25-32 degrees C. The stability of thin film of lipid vesicles was explained on the basis of hydrophobic interactions. The results obtained show that the stability of wetting films from aqueous solutions of single cationic and mixed cationic-anionic surfactants has electrostatic origin, whereas the stability of the phospholipid film is due to hydrophobic interaction.     

Surface oxidation and thin film preparation of AlCuFe quasicrystals

This paper reviews the work carried out over the last decade by the Nancy team on surface oxidation and thin film preparation of AlCuFe icosahedral quasicrystals. After discussing the problems linked with the surfaces of these quasicrystals, this review addresses the issue of the preparation of quasicrystalline surfaces and the first steps of oxidation under very low pressure of oxygen. This paper compares the nucleation and growth of oxide on i-AlCuFe quasicrystal and on a classical crystalline phase of this alloy: ω-AlCuFe. Aluminium diffusion is studied through the aluminium segregation on the surface that occurs during exposure to oxygen. Some surface properties of quasicrystals are reviewed with regard to oxidation. The evolution of physical parameters such as surface energy, friction coefficient and optical emissivity is described. This review also deals with the preparation of i-AlCuFe thin films. Two protocols to make i-AlCuFe thin films with free surfaces are described and discussed. The mechanical resistance and the tribological behaviour of these thin films, the oxygen and carbon influence on the final crystalline structure, and the quasicrystallization kinetics are presented.     

On the van der Waals interactions and the stability of polypeptide chains in helical conformations

In this work, we aim to investigate the contribution of van der Waals (vdW) interactions to the stability of polypeptides in helical conformations studying infinitely long chains of alanine and glycine with density functional theory. To account for vdW interactions, we have used the interatomic pairwise dispersion approach proposed by Tkatchenko–Scheffler (TS), the TS approach with self‐consistent screening (SCS) that self‐consistently includes long‐range electrostatic effects (TS + SCS), the D2 and D3 methods of Grimme et al., and the Langreth–Lundqvist procedure that treats nonlocally the correlation part of the approximation to the exchange‐correlation (xc) functional (called DF). First, we have tested the performance of these strategies studying a set of representative hydrogen bonded dimers. Next, we have studied polyalanine and polyglicine in π‐helix, α‐helix, ‐helix, 2₇, and polyproline‐II conformations and in a fully extended structure. We have found that the DF methodology in combination with a modified version for the Becke approximation to the exchange (optB86b), the D2, D3, TS, and TS + SCS strategies in combination with the Perdew–Burke–Ernzerhof approximation to the xc functional, describe fairly well dimer association energies. Furthermore, the DF method and the D2, D3, TS, and TS + SCS strategies predict very similar helical stabilities even though the approximation used in DF for describing the long‐range dispersion interactions is different that the one used in D2/D3 and TS/TS + SCS. We found that the stability doubles for π and α helices if vdW interactions are taken into account. © 2015 Wiley Periodicals, Inc.     

Tribology of thin wetting films between bubble and moving solid surface

This work shows a successful example of coupling of theory and experiment to study the tribology of bubble rubbing on solid surface. Such kind of investigation is reported for the first time in the literature. A theory about wetting film intercalated between bubble and moving solid surface was developed, thus deriving the non-linear evolution differential equation which accounted for the friction slip coefficient at the solid surface. The stationary 3D film thickness profile, which appears to be a solution of the differential equation, for each particular speed of motion of the solid surface was derived by means of special procedure and unique interferometric experimental setup. This allowed us to determine the 3D map of the lift pressure within the wetting film, the friction force per unit area and the friction coefficient of rubbing at different speeds of motion of the solid surface. Thus, we observed interesting tribological details about the rubbing of the bubble on the solid surface like for example:     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

A review of induction and attachment times of wetting thin films between air bubbles and particles and its relevance in the separation of particles by flotation

Bubble-particle attachment in water is critical to the separation of particles by flotation which is widely used in the recovery of valuable minerals, the deinking of wastepaper, the water treatment and the oil recovery from tar sands. It involves the thinning and rupture of wetting thin films, and the expansion and relaxation of the gas-liquid-solid contact lines. The time scale of the first two processes is referred to as the induction time, whereas the time scale of the attachment involving all the processes is called the attachment time. This paper reviews the experimental studies into the induction and attachment times between minerals and air bubbles, and between oil droplets and air bubbles. It also focuses on the experimental investigations and mathematical modelling of elementary processes of the wetting film thinning and rupture, and the three-phase contact line expansion relevant to flotation. It was confirmed that the time parameters, obtained by various authors, are sensitive enough to show changes in both flotation surface chemistry and physical properties of solid surfaces of pure minerals. These findings should be extended to other systems. It is proposed that measurements of the bubble-particle attachment can be used to interpret changes in flotation behaviour or, in conjunction with other factors, such as particle size and gas dispersion, to predict flotation performance.     

Stability studies of an electrochemically formed [C60]fullerene-palladium two-component film

The stability of C₆₀ and palladium two-component films, C₆₀/Pd, has been investigated. The effect of different polymerization conditions on the electrochemical stability of the film upon prolonged potential cycling has been studied. Stable voltammetric behavior was observed for polymers formed at potentials less negative than the potential of third C₆₀ reduction step. The incorporation of palladium particles into the structure of C₆₀/Pd polymers increases the polymer stability. The C₆₀/Pd films are doped with supporting electrolyte cations during reduction. The size of these cations is a crucial factor in determining the stability of the film. A strong solvent effect on the potential stability of the film was also observed. The wildest range of stable voltammetric properties was found for acetonitrile and N,N-dimethylformamide. No effect of the temperature on the film stability was observed. The results reported in this work allow for the determination of the optimal conditions for the formation of stable C₆₀/Pd films.