Thermal and mechanical properties of random copolymers of diisopropyl fumarate with 1‐adamantyl and bornyl acrylates with high glass transition temperatures

We report the thermal, optical, and mechanical properties of random copolymers produced by radical copolymerizations of diisopropyl fumarate (DiPF) with 1‐adamantyl acrylate (AdA) and bornyl acrylate (BoA). The effects of a methylene spacer included in the main chain and bulky ester alkyl groups in the side chain on the copolymer properties are discussed. The produced copolymers are characterized by NMR and UV–vis spectroscopies, size exclusion chromatography, thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis (DMA). The copolymerization rate and the molecular weight of the copolymers increase with an increase in the acrylate content in feed during the copolymerization (M_w = 25–110 × 10³). The onset temperature of decomposition (T_d5) and the glass transition temperature (T_g) of the copolymers also increase according to the content of the acrylate units (T_d5 = 296–329 °C and 281–322 °C, T_g = 80–133 °C and 91–106 °C for the copolymers of DiPF with AdA and BoA, respectively). Transparent and flexible copolymer films are obtained by a casting method and their optical properties such as transparency and refractive indices are investigated (n_D = 1.478–1.479). The viscoelastic data of the copolymers are collected by DMA measurements under temperature control. The storage modulus decreases at a temperature region over the T_g value of the copolymers, depending on the structure and amount of the acrylate units. The sequence structure of the copolymers is analyzed based on monomer reactivity ratios and composition in order to discuss the copolymer properties related to chain rigidity and sequence length distribution. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 288–296     

Comparison of the mechanical properties of styrene‐based ionomers containing either crown ether or pentaethylene glycol with those of underneutralized ionomers

Dynamic mechanical properties of styrene‐based ionomers containing varying amounts of either 15‐crown‐5 ether (CE) or pentaethylene glycol (PG) are compared with those of ionomers of varying degree of neutralization (ND). The cluster T_g (T_g,c) and ionic modulus of the ionomers decrease with increasing amount of CE or PG or decreasing ND. Thus, we propose that the CE binds Na⁺ strongly to form a large‐sized complex. Thus, the electrostatic interactions between charges decrease, leading to lower T_g,c. For the PG‐containing ionomers, the PG acts as polar plasticizer, further lowing the T_g,c. In the case of the underneutralized ionomers, the T_g,c is reduced by the existence of both relatively weak hydrogen bonds between carboxylic acid groups and relatively strong ionic bonds between ion pairs in the multiplets. The small‐angle X‐ray scattering results are also supportive of the above interpretations. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1358–1367     

Poly(methyl methacrylate) copolymers containing multiple,pendent plasticizing groups

New ether dimer (ED‐Eh) and diester (EHDE) derivatives of α‐(hydroxymethyl)acrylate, each having two 2‐ethylhexyl side chains, and an amine‐linked di(2‐ethylhexyl)acrylate (AL‐Eh), having three 2‐ethylhexyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature, T_g. The free radical polymerizations of these monomers yielded high‐molecular–weight polymers. Cyclopolymer formation of ED‐Eh and AL‐Eh was confirmed by ¹³C NMR analysis and the cyclization efficiencies were found to be very high (～100%). Copolymers of ED‐Eh, EHDE, and AL‐Eh with methyl methacrylate (MMA) showed significant T_g decreases over poly(methyl methacrylate) (PMMA) due to 2‐ethylhexyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of 2‐ethylhexyl methacrylate, ED‐Eh, EHDE, and AL‐Eh with MMA revealed that the impacts of these monomers on depression of T_g's are identical with respect to the total concentration of the pendent groups. This is consistent with an earlier study involving copolymers of monomers comprising one and two octadecyl side groups with MMA. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the 2‐ethylhexyl pendent groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2302–2310, 2010     

Synthesis and characterization of poly(L‐lactic acid)–poly(ε‐caprolactone) multiblock copolymers by melt polycondensation

An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(22) 5845 New multiblock copolymers derived from poly(L‐lactic acid) (PLLA) and poly(ε‐caprolactone) (PCL) were prepared with the coupling reaction between PLLA and PCL oligomers with ? NCO terminals. Fourier transform infrared (FTIR), ¹³C NMR, and differential scanning calorimetry (DSC) were used to characterize the copolymers and the results showed that PLLA and PCL were coupled by the reaction between ? NCO groups at the end of the PCL and ? OH (or ? COOH) groups at the end of the PLLA. DSC data indicated that the different compositions of PLLA and PCL had an influence on the thermal and crystallization properties including the glass‐transition temperature (T_g), melting temperature (T_M), crystallizing temperature (T_c), melting enthalpy (ΔH_m), crystallizing enthalpy (ΔH_c), and crystallinity. Gel permeation chromatography (GPC) was employed to study the effect of the composition of PLLA and PCL and reaction time on the molecular weight and the molecular weight distribution of the copolymers. The weight‐average molecular weight of PLLA–PCL multiblock copolymers was up to 180,000 at a composition of 60% PLLA and 40% PCL, whereas that of the homopolymer of PLLA was only 14,000. A polarized optical microscope was used to observe the crystalline morphology of copolymers; the results showed that all polymers exhibited a spherulitic morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5045–5053, 2004     

Breadth of glass transition temperature in styrene/acrylic acid block,random, and gradient copolymers: Unusual sequence distribution effects

Block, random, and gradient copolymers of styrene (S) and acrylic acid (AA) are synthesized by conventional or controlled radical polymerization, and their glass transition temperature (T_g) behaviors are compared. The location and breadth of the T_gs are determined using derivatives of differential scanning calorimetry heating curves. Each S/AA random copolymer exhibits one narrow T_g, consistent with a single phase of limited compositional nanoheterogeneity. Block copolymers exhibit two narrow T_gs originating from nanophase separation into ordered domains with nearly pure S or nearly pure AA repeat units. Each gradient copolymer exhibits a T_g response with a ～50–56 °C breadth that extends beyond the upper T_g of the block copolymers. For copolymers of similar composition, the maximum value in the gradient copolymer T_g response is consistent with that of a random copolymer, which has an enhanced T_g relative to poly(acrylic acid) due to more effective hydrogen bonding when AA units are separated along the chain backbone by S units. These results indicate that gradient copolymers with ordered nanostructures can be rationally designed, which exhibit broad glass transitions that extend to higher temperature than the T_gs observed with block copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2842–2849, 2007     

Structure‐property relationships for a series of amorphous partially aliphatic polyimides

High molecular weight, soluble, amorphous, partially aliphatic polyimides were successfully synthesized using an ester acid high‐temperature solution imidization route, which allows one to control desired glass‐transition (T_g) and processing temperatures. This method involves the prereaction of aromatic dianhydrides with ethanol and a tertiary amine catalyst to form ester acids, followed by the addition of diamines. Subsequent thermal reaction forms fully cyclized polyimides. This reaction pathway eliminates the need for anhydrous solvents and overcomes the problem of salt formation commonly observed for nucleophilic, more‐basic aliphatic amines when utilizing the traditional polyamic acid synthesis route. The molar ratio of aromatic‐to‐aliphatic diamines was varied to generate a series of copolyimides with the chosen dianhydride and tailor the physical properties for specific adhesive applications. This series of copolyimides was characterized by their molecular weight, T_g, thermal stability, coefficient of thermal expansion, refractive index, and dielectric constant. Structure‐property relationships were established. The γ and β sub‐T_g viscoelastic properties were researched to understand their molecular origins. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1503–1512, 2002     

Synthesis and polymerization of new di‐octadecyl ester derivatives of α‐hydroxymethyl acrylate: A structure‐property correlation for their copolymers with methyl methacrylate

New ether dimer (ED‐Od) and diester (ODE) derivatives of α‐hydroxymethylacrylate, each having two octadecyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature. The free radical polymerizations of both monomers yielded high‐molecular weight polymers. Cyclopolymer formation of ED‐Od was confirmed by ¹³C NMR analysis and the cyclization efficiency (0.95 or greater) was found to be as high as the cyclization efficiencies of the cyclopolymerizations of ether dimers of various alkyl α‐hydroxymethylacrylates synthesized previously. Copolymers of both ED‐Od and ODE with methyl methacrylate (MMA) showed significant T_g decreases over PMMA due to octadecyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of octadecyl methacrylate, ED‐Od and ODE with MMA revealed that the impacts of these monomers on depression of T_g's are identical. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the octadecyl side groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7785–7793, 2008     

Effect of hydrogen bonding and ionic aggregation on the melt rheology of an ethylene–methacrylic acid copolymer and its sodium salt

A study has been made of the dynamic and steady shear melt theology of an ethylene-methacrylic acid copolymer, its methyl ester, and 70% neutralized sodium salt. Measurements were made with a Rheometrics mechanical spectrometer using the eccentric rotating disks and cone-and-plate geometries over a temperature range of 120–180°C and frequency range of 10^?3 to 10² rad/sec. Correspondence was found between steady shear viscosity and the complex dynamic viscosity for the ester and acid materials. Over the temperature and frequency range studied the time-temperature superposition principle was applicable to G′ data for each of the derivatives and a supermaster curve could be constructed from the three individual master curves. Time-temperature superposition was found not applicable to G″ data for the sodium salt. Differences in rheological response between the ester and acid copolymers are explained by differences in T_g. It is suggested that differences in temperature shifts ΔT required to produce G′ superposition between the three derivatives reflect differences in ΔH for interchain interactions. A mechanism for flow of clustered ionomers is consisting of an initiation and a propagation step.     

Radical copolymerization of alkyl cyclobutenecarboxylates fused with cycloaliphatic framework with alkyl (meth)acrylates

Radical copolymerization behavior of alkyl cyclobutenecarboxylate‐derivatives 4‐6 and related norbornene‐derived compounds 7–9 is described. A variety of alkyl cyclobutenecarboxylates fused with cycloaliphatic framework ( 4–6 ) were prepared by [2 + 2] cycloaddition of five, six, and eight‐membered cycloolefins with alkyl propiolates [alkyl = Me, 2‐hydroxyethyl, and 3‐γ‐butyrolactonyl (γ‐BL)]. The fused cyclobutenecarboxylates 4–6 were radically copolymerized with n‐butyl acrylate (nBA) to afford random copolymers, and terpolymerized with alkyl methacrylates with bulky ester groups [alkyl = γ‐BL and 3‐(3‐methyladamantyl)]. The cyclobutane‐containing bicyclic framework incorporated in the resulting polymer backbone contributes to raising T_g of resulting copolymers. Similar results were obtained when a mixture of related norbornene‐derived compounds were used as monomers with an apparently enhanced T_g‐raising effect in the copolymerization with nBA. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2716–2724     

Statistical copolymers of methyl methacrylate and 2‐methacryloyloxyethyl ferrocenecarboxylate: Monomer reactivity ratios,thermal and electrochemical properties

Statistical copolymers of methyl methacrylate (MMA) with 2‐methacryloyloxyethyl ferrocenecarboxylate (MAEFC) were prepared by free radical polymerization. The reactivity ratios were estimated using the Fineman‐Ross, inverted Fineman‐Ross, Kelen‐Tüdos, and extended Kelen‐Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad monomer sequence fractions and the mean sequence length. The glass‐transition temperature (T_g) values of the copolymers were measured and examined by means of several theoretical equations, allowing the prediction of these T_g values. The thermal degradation behavior of the copolymers was also studied and compared with the respective homopolymers. Cyclic voltammetry was employed to study the electrochemical properties of the copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of polytulipalin‐g‐polylactide copolymers

Graft copolymers of poly(tulipalin A) (PT) and poly(DL‐lactide) (PDLLA) (PT‐g‐PDLLA) having various graft lengths and ratios were synthesized by free‐radical copolymerization of α‐methylene‐γ‐butyrolactone (MBL) and PDLLA macromonomers (HEMA‐PDLLA) terminated by 2‐hydroxyethyl methacrylate (HEMA)‐terminated. HEMA‐PDLLA were synthesized by ring opening polymerization (ROP) of DL‐lactide in the presence of HEMA. Both HEMA‐PDLLA and the copolymers were characterized by NMR spectroscopy and gel permeation chromatography (GPC). The thermal properties of the graft copolymers were found to depend on the graft length and the ratio. The copolymers consisting of PDLLA side chains of M_n = 500 Da showed a single T_g between T_gs of the two component polymers, suggesting a miscible state of PT and PDLLA. In contrast, the copolymers consisting of PDLLA side chains of M_n = 1100, 2000, and 7000 Da showed two isolated T_g, suggesting two segregated domains. The AFM phase images of the copolymers supported the single and phase‐separated morphologies for the former and latter systems, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Viscoelastic characteristics of plasticized cellulose nanocomposites

The plasticization effects of cellulose diacetate composite systems including nanoparticles (montmorillonite, MMT) and plasticizers(diethyl phthalate, DEP) were investigated by the time–temperature superposition technique and viscoelastic modeling. Exhibiting the highest modulus value in the glass state, the viscoelastic modulus of the MMT nanocomposite rapidly decreased above the glass‐transition temperature (T_g). The Arrhenius‐type activation energy of pristine cellulose acetate showed the lowest value of activation energy and both DEP‐plasticized and MMT‐reinforced systems exhibited increased values of activation energy. Although the free volume fraction at the T_g decreased with the plasticizer content, it increased with the incorporation of MMT, seemingly preventing the polymer chains from being arranged in an ordered structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 59–65, 2005     

Pseudopoly(amino acid)s: Copolymerization of trans‐4‐hydroxy‐L‐proline and α‐hydroxy acids

A series of novel copolymers of trans‐4‐hydroxy‐L ‐proline (Hpr) and α‐ hydroxy acids [D,L ‐mandelic acid (DLMA) and D,L ‐lactic acid (DLLA)] were synthesized via direct melt copolymerization with stannous octoate as a catalyst. These new copolymers had pendant amine functional groups along the polymer backbone chain. The optimal reaction conditions for the synthesis of the copolymers were obtained with 4 wt % stannous octoate at 140 °C under vacuum for 16 h. The synthesized copolymers were characterized by IR spectrophotometry, proton nuclear magnetic resonance, differential scanning calorimetry, and Ubbelohde viscometry. The effects of the kinds of comonomers and the comonomer molar ratio on the polycondensation and glass‐transition temperature (T_g) were investigated. The T_g's of the copolymers shifted to lower temperatures with an increasing comonomer molar ratio. As expected, the T_g's of the N‐Z‐Hpr/DLMA copolymers were higher than the N‐Z‐Hpr/DLLA copolymers, the pendant groups on the monomers (N‐Z‐Hpr) became larger and more flexible, and the T_g's of the resulting polymers declined. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 724–731, 2001     

Controlled synthesis and evaluation of cyanate ester/epoxy copolymer system for high temperature molding compounds

Epoxy molding compounds (EMCs) have become an integral component for high power electronics to work under harsh environment nowadays. For high temperature operation, polymer networks with high glass transition temperature (T_g) are required to ensure device stability. In this work, high T_g polymers were designed via controlled incorporation of in situ formed and thermally stable triazine structures into epoxy matrix. Reactions involved in the copolymer system of cyanate ester and epoxy (CE/EP) were investigated. Increasing ratio of cyanate ester dramatically promoted T_g of the copolymer up to 275 °C with improved heat resistance. High temperature aging and moisture absorption tests revealed that hydrolysis of polycyanurate network and rearrangement of cyanurate occurred during aging, especially for copolymers with higher than 75% of cyanate ester. Based on thermal properties and aging performance, the composition of CE/EP system was optimized. The formulated bisphenol A cyanate ester and biphenyl epoxy copolymer system has great potential to be applied as high temperature encapsulation materials in electronic packaging. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1337–1345     

Phosphonylation of a polypentenamer and preparation of its hydrogenated derivatives

Phosphonylated derivatives of a polypentenamer (PP) containing 82% trans and 17% cis double bonds have been prepared by the free-radical addition of dimethylphosphite to the double bonds and subsequent hydrogenation of the residual unsaturation. In this way derivatives were prepared containing approximately 5 and 10 mole % dimethylphosphonate side groups. These side groups were further reacted by hydrolysis or neutralization to form phosphonic acid and cesium phosphonate salts. Reaction conditions were so chosen that no backbone degradation occurred, and side reactions leading to crosslinking were avoided. The derivatives were characterized by gel-permeation chromatography (GPC), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), infrared spectroscopy, and nuclear magnetic resonance spectroscopy. It was found that increasing substituent concentration decreases the melting point T_m in the case of the hydrogenated derivatives and increases the glass transition temperature T_g in the case of the unhydrogenated derivatives. The free acid derivatives are the least thermally stable of all those studied and the hydrogenated derivatives are generally more stable than the unhydrogenated derivatives.     

Effects of Na‐sulfopropyl groups on the mechanical properties and morphology of polystyrene‐co‐methacrylate ionomers

The dynamic mechanical properties and morphology of poly(styrene‐co?3‐sulfopropyl sodium‐methacrylate) SSPMANa ionomers were investigated. It was found the increasing rate of ionic moduli of the SSPMANa ionomer was very low, and the cluster T_g of the ionomers remained more or less constant with increasing ion content. A well‐developed SAXS peak was seen for low ion content SSPMANa ionomers and the peak position changed slightly with ion content. Thus, it was suggested that the presence of the alkyl ester side chains made the ion pairs form multiplets more easily at their prevalent distances, and the small‐agglomerated multiplets were dispersed in the polymer matrix relatively evenly. The interpretation of ionic moduli using a number of theories implied that the multiplets and clusters acted as effective crosslinks and filler particles, respectively, and the size and shape of the clusters were irregular. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1043–1053     

Synthesis and properties of 4,4′-biphenyldicarboxylic acid and 2,6-naphthalenedicarboxylic acid

This article describes the synthesis and the properties of polyesters and copolyesters prepared from ethylene glycol, terephthalic acid, 4,4′ biphenyldicarboxylic acid (BDA), and 2,6-naphthlenedicarboxylic acid (NDA). The effect of incorporating varying levels of BDA and NDA on polyethylene terephthalate (PET) is described. Depending on the concentration, incorporation of BDA into PET leads to an improvement in glass transition temperature (T_g), strength, modulus, and barrier properties. Copolymers of PET containing up to about 50% BDA derived units are clear and have T_g's ranging from 85 to 105°C, making them suitable for applications where a high T_g along with clarity is important. Copolymers with higher BDA concentration are highly crystalline, with high rates of crystallization from the melt. Copolymerization of NDA with oligoethyleneterephthalate leads to copolymers that are generally amorphous. Crystallinity can be developed in copolymers with low concentration of NDA by thermal annealing. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3139–3146, 1999     

Copolymers of methyl methacrylate and fluoroalkyl methacrylates: Effects of fluoroalkyl groups on the thermal and optical properties of the copolymers

Fluoroalkyl methacrylates, 2,2,2‐trifluoroethyl methacrylate ( 1 ), hexafluoroisopropyl methacrylate ( 2 ), 1,1,1,3,3,3‐hexafluoro‐2‐methyl‐2‐propyl methacrylate ( 3 ), and perfluoro t‐butyl methacrylate ( 4 ) were synthesized. Homopolymers and copolymers of these fluoroalkyl methacrylates with methyl methacrylate (MMA) were prepared and characterized. With the exception of the copolymers of MMA and 2,2,2‐trifluoroethyl methacrylate ( 1 ), the glass transition temperatures (T_gs) of the copolymers were found to deviate positively from the Gordon‐Taylor equation. The positive deviation from the Gordon‐Taylor equation could be accounted for by the dipole–dipole intrachain interaction between the methyl ester group and the fluoroalkyl ester group of the monomer units. These T_g values of the copolymers were found to fit with the Schneider equation. The fitting parameters in the Schneider equation were calculated, and R² values, the coefficients of determination, were almost 1.0. The refractive indices of the copolymers, measured at 532, 633, and 839 nm wavelengths, were lower than that of PMMA and showed a linear relationship with monomer composition in the copolymers. 2 and MMA have a tendency to polymerize in an alternating uniform monomer composition, resulting in less light scattering. This result suggests that the copolymer prepared with an equal molar ratio of 2 and MMA may have useful properties with applications in optical devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4748–4755, 2008     

Clustering in carboxylated polysulfone ionomers: A characterization by dynamic mechanical and small-angle X-ray scattering methods

The dynamic mechanical properties and morphology of carboxylated polysulfone ionomers were investigated by dynamic mechanical thermal analysis and small-angle X-ray scattering (SAXS) techniques. It was found that at 25 mol % of ions, ionomers show two glass transitions: one at about 200 °C (the matrix T_g) and the other at about 235 °C (the cluster T_g). It was also found that with increasing ion content up to about 37 mol %, the matrix T_g shifted to higher temperatures and the size of tan δ peak decreased. The cluster T_g did not change. From the results, it is suggested that even at high ion content, the ionomers contain a significant amount of unclustered material, but that the increase in the ion content does not increase the amount of clustered material. SAXS profiles showed the ionic peak, which represents the presence of multiplets in the cluster regions. In addition, the difference in the matrix and cluster T_g's of this ionomer system was found to be about 35°. Thus, it is postulated that ionic group aggregation is subject to steric hindrance owing to the bulkiness of benzene ring, and tension on polymer chains surrounding the multiplet owing to chain rigidity, which limit the size and stability of the multiplet significantly. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 3226–3232, 1999     

Wettability of poly(styrene‐co‐acrylate) ionomers improved by oxygen‐plasma source ion implantation

The surfaces of poly(styrene‐co‐acrylic acid) copolymers and their Na‐ and Cs‐neutralized ionomers were modified by O₂‐plasma source ion implantation (PSII) treatment to improve the surface wettability. The changes in the surface wettability, composition, and structure upon the PSII treatment were examined with contact‐angle measurements and X‐ray photoelectron spectroscopy. The untreated surfaces of the acid copolymers and ionomers exhibited different surface energies; this implied clearly that the type of ion species affects the surface hydrophilicity. Also, the PSII treatment induced oxygen‐containing groups to reside on the surface and ionic groups to come out toward the surface; this made the surfaces of the ionomers more hydrophilic as compared with that of the acid copolymers. The ionomers also showed slow hydrophobic recovery. Thus, it was suggested that the reduced mobility of the polymer chain because of the presence of ionic aggregates results in restricted reorientation of oxygen‐containing groups. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1791–1797, 2003