Influence of the stereochemical configuration on the radical polymerization of methacrylic monomers: cis‐ and trans‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate

The synthesis of two new isomeric monomers, cis‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate (CCDM) and trans‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate (TCDM), starting from the reaction of glycerol and cyclohexanecarbaldehyde, is reported. The process involved the preparation of different alcohol acetals and esterification with methacryloyl chloride of the corresponding cis and trans 5‐hydroxy compounds of 2‐cyclohexyl‐1,3‐dioxane. The radical polymerization reactions of both monomers, under the same conditions of temperature, solvent, monomer, and initiator concentrations, were studied to investigate the influence of the monomer configuration on the values of the propagation and termination rate constants (k_p and k_t ).The values of the ratio k_p /k_t ^1/2 were determined by UV spectroscopy by the measurement of the changes of absorbance with time at several wavelengths in the range 275–285 nm, where an appropriate change in absorbance was observed. Reliable values of the kinetics constants were determined by UV spectroscopy, showing a very good reproducibility of the kinetic experiments. The values of k_p /k_t ^1/2, in the temperature interval 45–65 °C, lay in the range 0.40–0.50 L^1/2/mol^1/2s^1/2 and 0.20–0.30 L^1/2/mol^1/2s^1/2 for CCDM and TCDM, respectively. Measurements of both the radical concentrations and the absolute rate constants k_p and k_t were also carried out with electron paramagnetic resonance techniques. The values of k_p at 60 °C were nearly identical for both the trans and cis monomers, but the termination rate constant of the trans monomer was about three times that of the cis monomer at the same temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3883–3891, 2000     

Synthesis and kinetics of polymerization of unsaturated monomers with OH groups in their structure: I.3-hydroxyneopentyl acrylate

The synthesis of new unsaturated monomers containing functional groups has been theoretically analyzed by considering a simple kinetic scheme. In the reactions between acetyl and acryloyl chloride with neopentylglycol, it was shown that the comparison between theoretical and experimental results, does not allow us to conclude that the two rate constants controlling the reactions are equivalent. Kinetic experiments of the polymerization of 3-hydroxyneopentyl acrylate were carried out in benzene and 1,4-dioxane solution at different temperatures. Dilatometric techniques and nonlinear least-squares methods were used to obtain kinetic data and to determine the kinetic constants, respectively. The values of $k_p /k_t^{1/2}$ for this monomer were found higher in dioxane than in benzene due, probably, to the fact that in the last solvent the polymerization is heterogeneous. The activation energy, determined by using different values of $k_p /k_t^{1/2}$ was found 7.6 kcal/mol. The stereostructure of the polymers derived from 3-hydroxyneopentyl acrylate and 3-acetoxyneopentyl acrylate was determined by ¹³C-NMR spectroscopy from the analysis of the resonance signals belonging to the carbonyl groups, obtaining values for the fraction of isotactic dyads in the range 0.36 ± 0.03 for both polymers. Finally, the glass transition temperatures of both polymers, determined calorimetrically, were found 281 and 255 K, respectively. © 1994 John Wiley & Sons, Inc.     

Synthesis and kinetics of polymerization of unsaturated monomers with OH groups in their structure. II. 3-hydroxyneopentyl methacrylate

The synthesis of unsaturated monomers containing one or more hydroxyl groups by reaction between polyalcohols (number of OH, n≥2) and monoacid chlorides has been theoretically analyzed. The difficulties were shown involved in the preparation of these monomers with a high degree of purity even in the most favorable case of the completely substituted compound. The calculated mole fractions of the two monomers that can be obtained by reaction between neopentylglycol and methacryloyl chloride were compared with the experimental ones. Kinetic experiments of the polymerization of 3-hydroxyneopentyl methacrylate and 2-hydroxyethyl methacrylate were carried out at different temperatures in 1,4-dioxane for the former monomer and dioxane and absolute ethanol for the latter. Dilatometric techniques and nonlinear least-squares methods were used to obtain kinetic data and to determine the kinetic constants, respectively. In homogeneous solution the values of k_p/k^1/2_t for the 3-hydroxyneopentyl methacrylate and 2-hydroxyethyl methacrylate was determined by ¹³C-NMR spectroscopy and the molar fractions of tactic triads and dyads were calculated from different resonance signals. The polymers are predominantly syndiotactic and follow a Bernoullian distribution of tactic sequences. Finally, the glass transition temperatures of both polymers, determined calorimetrically, were 145 and 89°C, respectively. © 1995 John Wiley & Sons, Inc.     

Photopolymerization of hybrid monomers: Part I: Comparison of the performance of selected photoinitiators in cationic and free-radical polymerization of hybrid monomers

Photopolymerization of the hybrid monomers: 3,4-epoxycyclohexylmethyl methacrylate (Cyclomer M100) and 2-(2-vinyloxyethoxy)ethyl acrylate (VEEA) was studied by Fluorescence Probe Technique (FPT). Kinetics of cationic and free-radical photopolymerization of the hybrid monomers in the presence of the same molar concentration of various photoinitiators was compared, using UV LEDs as the curing light source. The performance of the following photoinitiators was tested in the cationic photopolymerization: Sylanto 7M-S, Sylanto 7M-P, Speedcure 938, Irgacure 250, HIP, Esacure 1187, and the following photoinitiators were used to induce free radical photopolymerization: Irgacure 184, Irgacure 127, Irgacure 651, Irgacure 907, Irgacure 819 and Speedcure TPO. It was found that, among the cationic photoinitiators, Sylanto 7M-S and Sylanto 7M-P are the most effective photoinitiators of the cationic polymerization for use with 320 nm and 365 nm UV LEDs, while Irgacure 819 and Speedcure TPO perform best in free radical photopolymerization of the hybrid monomers. Some structural factors and parameters affecting the photoinitiators performance are discussed.     

Synthesis,polymerization, and effects on the flame retardancy of boron‐containing styrenic monomers

A boron‐containing styrenic monomer, 5‐benzyl‐2‐phenyl‐5‐(4‐vinylbenzyl)‐[1,3,2]‐dioxaborinane, was synthesized to study the influence of boron on the properties of the homopolymer and copolymer with styrene. A similar monomer without boron was also prepared and polymerized so that the properties of its polymer could be compared with the aforementioned boron‐containing polymers. These monomers were characterized by elemental analysis, mass spectrometry, Fourier transform infrared, and ¹H and ¹³C NMR. The thermal degradation of boron‐containing styrenic polymers was studied by means of Fourier transform infrared, which showed the presence of boric acid as char. The flame‐retardant effect was assessed by the measurement of the limiting oxygen indices and char yields during heating in nitrogen and air. The boron‐containing polymers had higher limiting oxygen indices and gave greater yields of char than those without boron. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem43: 6419–6430, 2005     

Synthesis and radical polymerization of hydrophilic methacrylates with oxyethylene units in the pendant chain

The syntheses of methacrylic monomers of the general structure where n is 3, 4, 5, or 6, were performed by the reaction of the corresponding alcohol ethers with methacryloyl chloride. The alcohol ethers were previously prepared by different synthetic procedures involving the monoetherification of the starting glycols. The polymerizations kinetics of the monomers were examined at several temperatures in the bulk and in dioxane solutions. NMR spectroscopy and electron paramagnetic resonance techniques were used to study the kinetics of polymerization. The polymerization rate parameter, expressed as (2f)^1/2k_p/〈k_t〉^1/2, and the values of the propagation rate coefficient k_p and the termination rate coefficient 〈k_t〉/f, where f is the efficiency factor of the initiator, were determined. The reactivity of the monomers depended on the size of the ester residue in such a way that the longer the lateral chain was, the higher the polymerization rate was and the lower the termination rate coefficient was. On the contrary, the dependence of k_p on the chemical structure was very small. In the solution polymerizations of all these monomers (monomer concentration = 1 mol L^?1), the radical concentrations remained almost constant until very high conversions, whereas in the bulk, a different behavior was observed that depended on the number of oxyethylene units in the side chain of the monomer. In this sense, for n = 4, 5, or 6, the radical concentration remained almost invariable with the reaction time, whereas for n = 3, a moderate increase occurred at low conversions, contrasting with the important increase observed at similar conversions for n = 1. This showed that the gel effect in these methacrylic monomers was greatly dependent on the number of bonds of the lateral chain. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1567–1579, 2003     

Effects of thiols,lithium chloride,and ethoxylated monomers on the frontal polymerization of a triacrylate

Thermal frontal polymerization is a process in which a localized reaction propagates through an unstirred system by the coupling of the thermal diffusion and the Arrhenius kinetics of an exothermic polymerization. With multifunctional acrylates, such as trimethylolpropane triacrylate (TMPTA‐n), front temperatures can reach 250 °C, resulting in smoke from unreacted peroxide. Addition of a thiol lowers the front temperature and the front velocity due the copolymerization between the thiol and the acrylate, with some formulations not sufficiently reactive to sustain frontal polymerization. The effects of molecular weight per thiol and functionality of thiol on front temperature and velocity were studied in the frontal copolymerization of TMPTA‐n/trimethylolpropane ethoxylate triacrylate and different thiols. We also investigated the front temperature and velocity for a system containing triacrylate and dodecyl acrylate. Finally, the effects of lithium chloride in the presence of thiol on the front velocity and front temperature were studied. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and polymerization of new styryl and methacryloyl monomers containing acidic saccharide moieties

New styryl‐type water‐insoluble and methacryloyl‐type water‐soluble monomers, N‐(p‐vinylbenzyl)‐1,2‐O‐isopropylidene‐6‐D ‐glucofuranuronamide and N‐(2‐methacryloylamino)ethyl‐1,2‐O‐isopropylidene‐6‐D ‐glucofuranuronamide, were synthesized from the most common acidic saccharide, D ‐glucuronic acid. Their radical homopolymerizations and copolymerizations with styrene and acrylamide were tried under various conditions. The isopropylidene groups in the resulting polymers were removed in a mixture of trifluoroacetic acid and water (2/1 v/v) to give the corresponding polymers with many pendant D ‐glucopyranuronyl groups with reactive reducing groups. The pendant reducing ends may be useful as potential binding sites under a hydrophilic atmosphere. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3893–3901, 2001     

Synthesis of phosphorus‐containing vinyl ether monomers and oligomers and their photoinitiated polymerization

Divinyl ether monomers containing phosphorous residues were synthesized by the addition reaction of glycidyl vinyl ether (GVE) with various phosphonic dichlorides or dichlorophosphates with quaternary onium salts as catalysts. The reaction of GVE with phenylphosphonic dichloride gave bis[1‐(chloromethyl)‐2‐(vinyloxy)ethyl]phenylphosphonate ( 1a ) in a 77% yield. The polycondensation of 1a with terephthalic acid was also carried out with 1,8‐diazabicyclo[5.4.0]undecene‐7 (DBU) as a condensing agent to afford the corresponding phosphorus‐containing polyester. A multifunctional monomer containing both vinyl ether groups and methacrylate groups was prepared by the reaction of 1a with methacrylic acid with DBU. The photoinitiated cationic polymerization of these vinyl ether compounds proceeded rapidly with bis[4‐(diphenylsulfonio)phenyl]sulfide‐bishexafluorophosphate as the cationic photoinitiator without a solvent upon ultraviolet irradiation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2031–2042, 2004     

Synthesis of ionic polymers by free radical polymerization using aprotic trimethylsilylmethyl-substituted monomers

Aprotic ionic polymers containing trimethylsilylmethyl-substituted imidazolium structures are synthesized using free radical polymerization of monomers comprising a vinyl group either at the cation or at the anion. Bulk polymerization is used for the room temperature ionic liquid monomer 1-trimethylsilylmethyl-3-vinylimidazolium bis(trifluoromethylsulfonyl)imide. In contrast to this, solution polymerization is applied for 1-trimethylsilylmethyl-3-methylimidazolium p-styrene sulfonate because this monomer undergoes self-polymerization during melting at a higher temperature than selected for bulk polymerization. Glass transition temperature (T _g) of the ionic polymers and intrinsic viscosity measurements indicate differences between these polymers, which are composed either of a polycation with a trimethylsilylmethyl substituent at each vinylimidazolium segment of the polymer chain and mobile bis(trifluoromethylsulfonyl)imide (NTf₂⁻) anions or a polyanion containing p-styrene sulfonate segments and mobile 1-trimethylsilylmethyl-3-methylimidazolium cations. The new aprotic ionic polymers containing trimethylsilylmethyl substituents may be interesting for application in adhesive, interlayer and membrane manufacturing.     

Synthesis,characterization, and photocuring of siloxane‐oxirane monomers

The aim of this study was to synthesize, characterize, and evaluate alternative monomers for use in dentistry. Three siloxane‐oxirane low‐shrinkage monomers were synthesized, and the products’ conversion was followed by Fourier transform ‐ infrared spectroscopy. The products obtained were characterized by ¹H and ¹³C NMR and evaluated for viscosity and a refractive index. The polymerization was evaluated by formulating two experimental photoinitiation systems, which varied for the presence of 1,2 ethanediol. A ternary system with camphorquinone (CQ), ethyl 4‐dimethylaminobenzoate (EDAB), and diphenyliodonium hexafluorphosphate (DPI) was used as control. The degree of conversion was assessed by differential scanning calorimetry (DSC). The NMR confirmed the synthesis success with 75, 87, and 55% yields for the monomers synthesized. The viscosity and the refractive index of the monomers showed favorable rheological and physical behaviors for application in dentistry. Moreover, the presence of 1,2 ‐ ethanediol increased the degree of conversion of the siloxane‐oxirane monomers. This study showed a simple and effective way to synthesize siloxane‐oxirane monomers with a high potential for application in dental materials. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1728–1733     

Photoinitiated cationic polymerization of epoxy alcohol monomers

A series of epoxy alcohols were prepared by simple, straightforward methods. These compounds were very reactive monomers that polymerized rapidly on UV irradiation in the presence of cationic photoinitiators. The kinetics of the cationic photopolymerization of these monomers were studied with diaryliodonium salt photoinitiators and real‐time IR spectroscopy. The rate of epoxide ring‐opening polymerization was enhanced markedly by the presence of the hydroxy group. Using model compounds, the monomers were shown to polymerize via an activated monomer mechanism. Simple epoxy alcohols polymerized to give polymers with a hyperbranched structure. The novel monomers also were observed to accelerate the rate of the photopolymerization of mono‐ and multifunctional epoxides. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 389–401, 2000     

The effect of acrylate functionality on frontal polymerization velocity and temperature

Frontal polymerization is a method of converting monomer(s) to polymer via a localized reaction zone that propagates from the coupling of thermal diffusion with the Arrhenius kinetics of an exothermic reaction. Several factors affect front velocity and temperature with the role of monomer functionality being of particular interest in this study. Polymerizing a di and triacrylate of equal molecular weight per acrylate revealed that as the proportion of triacrylate was increased the velocity and temperature increased. This is attributed to increased crosslinking and autoacceleration. Comparing several different acrylate monomers, both neat and diluted with dimethyl sulfoxide (DMSO) so as to maintain constant acrylate group concentration, shows that velocity increases with increased functionality from mono to difunctional monomers. This trend breaks when applied to tri‐ and tetraacrylates, with fronts containing trifunctional monomer being the fastest. Acrylates containing hydroxyl functionality, as in the case of pentaerythritol‐based triacrylates, are slower than acrylates without. This is attributed to a chain‐transfer event and was tested using octanol and a hydroxyl‐free acrylate. It has also been shown that small amounts of water cause a lowering of front velocity due to energy lost via vaporization, which lowers the front temperature. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 982–988     

Photoinitiated polymerization of methacrylic monomers in a polystyrene matrix: Kinetic,mechanistic, and structural aspects

The kinetics and mechanism of the photoinitiated polymerization of tetrafunctional and difunctional methacrylic monomers [1,6‐hexanediol dimethacrylate (HDDMA) and 2‐ethylhexyl methacrylate (EHMA)] in a polystyrene (PS) matrix were studied. The aggregation state, vitreous or rubbery, of the monomer/matrix system and the intermolecular strength of attraction in the monomer/matrix and growing macroradical/matrix systems are the principal factors influencing the kinetics and mechanism. For the PS/HDDMA system, where a relatively high intermolecular force of attraction between monomer and matrix and between growing macroradical and matrix occurs, a reaction‐diffusion mechanism takes place at low monomer concentrations (<30–40%) from the beginning of the polymerization. For the PS/EHMA system, which presents low intermolecular attraction between monomer and matrix and between growing macroradical and matrix, the reaction‐diffusion termination is not clear, and a combination of reaction‐diffusion and diffusion‐controlled mechanisms explains better the polymerization for monomer concentrations below 30–40%. For both systems, for which a change from a vitreous state to a rubbery state occurs when the monomer concentration changes from 10 to 20%, the intrinsic reactivity and k_p/k_t^1/2 ratio (where k_p is the propagation kinetic constant and k_t is the termination kinetic constant) increase as a result of a greater mobility of the monomer in the matrix (a greater k_p value). The PS matrix participates in the polymerization process through the formation of benzylic radical, which is bonded to some extent by radical–radical coupling with the growing methacrylic radica, producing grafting on the PS matrix. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2049–2057, 2001     

Regioselective hydrosilations. III. The synthesis and polymerization of ambifunctional silicon-containing epoxy monomers

Silicon-containing epoxide compounds bearing Si ? H groups can be readily prepared in high yields by the regioselective rhodium-catalyzed monohydrosilation of α,ω-dihydrogen functional siloxanes and silanes with vinyl epoxides. The remaining Si ? H groups in these compounds can be further selectively hydrosilated with unsaturated epoxides to give a series of unique ambifunctional monomers containing two different epoxide groups in the same molecule. The photopolymerization of these monomers has been studied using analytical techniques including real time infrared spectroscopy and differential scanning photocalorimetry. On photopolymerization, the new monomers yield interesting networks. © 1993 John Wiley & Sons, Inc.     

Synthesis of double hydrophilic graft copolymer containing poly(ethylene glycol) and poly(methacrylic acid) side chains via successive ATRP

A well‐defined double hydrophilic graft copolymer, with polyacrylate as backbone, hydrophilic poly(ethylene glycol) and poly(methacrylic acid) as side chains, was synthesized via successive atom transfer radical polymerization followed by the selective hydrolysis of poly(methoxymethyl methacrylate) side chains. The grafting‐through strategy was first used to prepare poly[poly(ethylene glycol) methyl ether acrylate] comb copolymer. The obtained comb copolymer was transformed into macroinitiator by reacting with lithium diisopropylamine and 2‐bromopropionyl chloride. Afterwards, grafting‐from route was employed for the synthesis of poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methoxymethyl methacrylate) amphiphilic graft copolymer. The molecular weight distribution of this amphiphilic graft copolymer was narrow. Poly(methoxymethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections. The final product, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methacrylate acid), was obtained by selective hydrolysis of poly(methoxymethyl methacrylate) side chains under mild conditions without affecting the polyacrylate backbone. This double hydrophilic graft copolymer was found be stimuli‐responsive to pH and ionic strength. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4056–4069, 2008     

Synthesis and radical polymerization of dissymmetric fumarates with alkoxyethyl and bulky siloxy groups

Novel dissymmetric fumarate monomers ( 1a – c ) having both an alkoxyethyl group such as 2‐methoxyethyl ( a ), 2‐(2‐methoxyethoxy)ethyl ( b ), and 2‐(2‐(2‐methoxyethoxy)ethoxy)ethyl ( c ) and a bulky 3‐[tris(trimethylsiloxy)silyl]propyl group were synthesized successfully, and their radical homopolymerizations and copolymerizations with styrene (St) were investigated. Monomer reactivities of the 1a – c in homopolymerizations were enhanced with an increase in the length of alkoxyethyl chains. The enhancement in the reactivity was explained with the suppression of the termination reaction, resulting from the increased steric hindrance induced by an increase in the size of alkoxyethyl chains. Copolymerizations of the 1a – c with St were carried out in bulk in the presence of AIBN at 60 °C, and their copolymerizations proceeded in a highly alternating tendency regardless of alkoxyethyl chain lengths. The Q, e values of the 1a – c were obtained as 0.48, +1.55 for the 1a , 0.66, +1.16 for the 1b , and 0.60, +1.16 for the 1c , respectively, from the terminal model reactivity ratios, and the 1a – c were found to be conjugative, electron‐accepting monomers. Membranes containing the 1a unit, prepared by the copolymerization of 1a with N‐vinylpyrrolidone (NVP) and terpolymerization of 1a , NVP, and 2‐hydroxyethyl methacrylate, have higher oxygen permeability than those containing no 1a unit, and also they have much better transparency compared with the membranes containing 3‐[tris(trimethylsilyloxy)silyl]propyl methacrylate unit. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 420–433, 2009     

Preparation and reactivity of metal-containing monomers

Polymethacryloylacetonates of some transition metals were obtained by free-radical polymerization of the corresponding metal-containing monomers and the main regularities of the process were studied. The complexation with a metal ion decreased the reactivity of the methacryloylacetone towards polymerization in the series Mn^II > Co^II > Ni^II > Cr^III, which is analogous to the electronegativity of these metals. Macrochelates thus obtained contain one equivalent of metal per monomer unit and their molecular weights are within 10000–18200. The structure of the coordination site was shown to be retained in the course of polymerization.For communication 34, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2060–2064, December, 1993.     

Light-induced polymerization of new highly reactive acrylic monomers

Acrylic monomers containing an oxetane, dioxolane, oxazolidone or carbonate group in their structural unit have been shown to copolymerize rapidly and extensively with a polyurethane-diacrylate, upon UV radiation. For the most reactive resin, 50% conversion was reached within 3 ms of exposure to a medium-pressure mercury lamp. The kinetics of these ultrafast polymerizations was studied quantitatively by infrared spectroscopy. The rate of polymerization, photosensitivity, and amount of residual acrylate in the cured polymer were determined for the various monomers studied, and compared to the values obtained with conventional mono-, di-, and triacrylates. The functional group introduced into the monomer unit was shown to have a drastic effect on both the reactivity and the physical characteristics of the photocrosslinked polymer. Soft and highly flexible low-modulus polymers were produced with the oxetane, dioxolane, and chlorinated monomers, while the carbonate-acrylate compounds lead to hard and glassy materials. © 1993 John Wiley & Sons, Inc.