Polymorphic crystal forms and morphology of syndiotactic polystyrene in miscible states

X-ray diffraction and optical microscopy characterization were performed to evaluate the phenomenon of alteration of polymorphism of syndiotactic polystyrene (s-PS) in the presence of other blending miscible polymers: poly(2,6-dimethyl-p-phenylene oxide) (PPO) or atactic polystyrene (a-PS). Both α and β crystal forms were observed in the neat s-PS sample, but only β-form crystal was found in miscible blends of s-PS with a-PS or PPO. The order and neighboring chain segments of neat s-PS are different from those of s-PS/PPO or s-PS/a-PS blends; thus, it is plausible that the greater randomness in the melt state of s-PS/a-PS or s-PS/PPO blends might be unfavorable for formation of α-form crystals from melts. The final spherulitic morphology the s-PS/a-PS or s-PS/PPO blends suggests that the amorphous-state miscibility of does not change much the spherulitic structure of s-PS. The radial growth rate is, in general, depressed with the presence of blending miscible polymers in s-PS of equal T_g or PPO of higher T_g. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2725–2735, 1998     

Synthesis,characterization, and biological activity of N‐(4‐acetylphenyl)maleimide and its oxime,carbazone, thiosemicarbazone derivatives and their polymers

A new type of maleimide monomer, N‐(4‐acetylphenyl)maleimide (NAPMI), was synthesized. The oxime, carbazone, and thiosemicarbazone derivatives of NAPMI were prepared with hydroxylamine hydrochloride, semicarbazide hydrochloride, and thiosemicarbazide hydrochloride, respectively. Radical homopolymerization of NAPMI and its derivatives were prepared at 60 °C in dimethyl sulfoxide solution with azobisisobutyronitrile as an initiator. The monomers and theirs homopolymers were characterized with Fourier transform infrared and NMR techniques. The glass‐transition temperatures, thermal stability, and ultraviolet stability of the polymers are compared. The activation energies of the thermal degradation of polymers were calculated by the Kissinger method. The antibacterial and antifungal effects of the monomers and polymers were also investigated on various bacteria and fungi. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1942–1951, 2003     

Bicyclobutanes and cyclobutenes: Unusual carbocyclic monomers

Bicyclobutanes and cyclobutenes substituted with electron‐attracting groups represent novel classes of reactive monomers. They readily undergo free‐radical and anionic polymerizations to give high polymers consisting of 1,3‐ and 1,2‐enchained cyclobutane rings, respectively. They also copolymerize readily with conventional vinyl monomers. These polymers display numerous attractive properties in comparison with their vinyl counterparts, including enhanced thermal stability, superior optical properties, and higher glass‐transition temperatures. The syntheses of these monomers are reviewed, and suggestions toward future larger scale production are made. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 625–635, 2003     

Novel approach to the chemical modification of poly(vinyl alcohol): Phosphorylation

The chemical modification of poly(vinyl alcohol) (PVA) was performed through oxidation followed by nucleophilic addition. PVA was oxidized by KMnO₄ to form vinyl ketone units along the polymer backbone. The chemical modification of PVA was then conducted through the reaction of the carbonyl group of the vinyl ketone unit with 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) as a nucleophile. Through this approach, the phosphorous DOPO group was attached onto the carbon atom of the polymer main chain rather than onto the pendent hydroxyl groups of PVA. The formed DOPO‐containing PVA showed improved thermal stability, organosolubility, and flame retardance. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1107–1113, 2003     

Blue light‐emitting poly(p‐phenylenevinylene) derivatives containing alternating conjugated segments and aliphatic spacers

Two new poly(p‐phenylenevinylene) derivatives were prepared by Heck coupling. They contained alternating conjugated segments on the basis of p‐distyrylbenzene and flexible nonconjugated spacers. The synthesized polymers P1 and P2 carried two m‐terphenyl of four tertbutyl pendants, respectively, per repeat unit. Both polymers were amorphous and exhibited satisfactory thermal stability. Polymer P1 displayed a limited solubility in common organic solvents, whereas P2 dissolved readily in these solvents. The glass‐transition temperature values were 128 °C for P1 and 37 °C for P2 . The polymers emitted blue or violet‐blue light with photoluminescent maxima at about 445 and 460 nm for solutions and thin films, respectively. The bulky pendants reduced their tendency to form aggregates. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1091–1098, 2003     

Synthesis and optical properties of fluorinated poly(arylene ether phosphine oxide)s

Fluorinated dihydroxy phosphine oxide monomers were synthesized via chlorination, Grignard, and demethylation techniques. The prepared monomer was successfully polymerized with each of the three perfluorinated monomers (decafluorobiphenyl, decafluorobenzophenone, and pentafluorophenylsulfide) by nucleophilic aromatic substitution. The average molecular weight ranged between 7800 and 14,900 g/mol. The glass‐transition temperatures of the polymers were registered in the range of 185–235 °C, and all the polymers exhibited high thermal stability up to 326–408 °C. The results of the refractive‐index measurements indicated control of the refractive index between 1.5181 and 1.5536 and an optical loss of 0.53 dB/cm at 1550 nm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1497–1503, 2003     

Synthesis of semiaromatic polyimides from aromatic diamines containing adamantyl units and alicyclic dianhydrides

We prepared new semiaromatic polyimides from alicyclic dianhydrides and aromatic diamines containing adamantyl and biadamantyl units. Polycondensations were performed in 1‐methyl‐2‐pyrrolidinone at room temperature for 7 h and then 80 °C for 23 h, giving poly(amic acid)s with inherent viscosities up to 0.58 dL/g. Poly(amic acid)s were converted to corresponding poly(imide)s by thermal treatment. Poly(imide)s showed relatively high thermal stability (5% weight loss around 450 °C) and low dielectric constants (2.69–2.79). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 144–150, 2004     

Structure,thermal stability,and photocrosslinking characterization of HDPE/LDH nanocomposites synthesized by melt‐intercalation

Structure, thermal properties, and influence of layered double hydroxide (LDH) fillers on photocrosslinking behavior of high‐density polyethylene (HDPE)/LDH nanocomposites have been studied in the present article. The X‐ray diffraction and transmission electron microscopy analysis demonstrate that the completely exfoliated HDPE/LDH nanocomposites can be obtained by controlling the organomodified LDH loading via melt‐intercalation. The data from the thermogravimetric analysis show that the HDPE/LDH nanocomposites have much higher thermal stability than HDPE sample. When the 50% weight loss was selected as a comparison point, the decomposition temperature of HDPE/LDH sample with 5 wt % LDH loading is ～40 °C higher than that of HDPE sample. The effects of UV‐irradiation on the HDPE/LDH nanocomposites show that the photoinitiated crosslinking can destroy the completely exfoliated structure to form the partially exfoliated structure, which decreased the thermal stability of the nanocomposites. However, the thermal stability of photocrosslinked samples can increase with increasing the UV‐irradiation time. The effect of LDH loading on the gel content of UV‐irradiated nanocomposites shows that the LDH materials can greatly absorb the UV irradiation and thus decrease the crosslinking efficiency. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3165–3172, 2006     

Disordered Nanoporous Crystalline Modifications of Syndiotactic Polystyrene

Disordered crystalline modifications formed by s(2/1)2 helices of syndiotactic polystyrene (s-PS) can be prepared by the removal of bulky guest molecules from intercalate as well as from triclinic δ clathrate forms. The X-ray diffraction pattern of the disordered crystalline modification is characterized from 2θ_CuKα < 12° by only a broad diffraction peak whose maximum is located in the 2θ_CuKα range between 8.7° and 9.8°. Films presenting disordered crystalline modifications have been used for the removal of an organic pollutant from dilute aqueous solutions. The sorption behavior of the disordered crystalline modifications are compared with that of the nanoporous-crystalline δ form as well as of the dense γ form. The disordered crystalline modifications of s-PS presents pollutant (1,2-dichloroethylene) uptake comparable to those of the nanoporous δ and ε forms and much higher than those obtained for the dense γ form. Moreover, FTIR data relative to sorption of 1,2-dichloroethane show that the guest sorption occurs essentially only in the crystalline phase. As a consequence, the obtained disordered crystalline modifications of s-PS can be fully considered disordered nanoporous-crystalline modifications.     

Synthesis and properties of new ultraviolet–blue‐emissive fluorene‐based aromatic polyoxadiazoles with confinement moieties

Three families of fluorene–oxadiazole‐based polymers with confinement moieties have successfully been prepared by the two‐step method for polyoxadiazole synthesis. These polymers show good solubility in common organic solvents, high thermal stability, and strong violet and blue photoluminescence in solution and as films, respectively. Their low‐lying highest occupied molecular orbital/lowest unoccupied molecular orbital energy levels originate from the electron deficiency of an oxadiazole moiety, and this suggests that they may be useful for blue‐emitting and electron‐transport/hole‐blocking layers in electroluminescent devices. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 674–683, 2003     

Coagulation method for preparing single-walled carbon nanotube/poly(methyl methacrylate) composites and their modulus,electrical conductivity,and thermal stability

A coagulation method providing a better dispersion of single-walled carbon nanotubes (SWNTs) in a polymer matrix was used to produce SWNT/poly(methyl methacrylate) (PMMA) composites. Optical microscopy and scanning electron microscopy showed an improved dispersion of SWNTs in the PMMA matrix, a key factor in composite performance. Aligned and unaligned composites were made with purified SWNTs with different SWNT loadings (0.1–7 wt %). Comprehensive testing showed improved elastic modulus, electrical conductivity, and thermal stability with the addition of SWNTs. The electrical conductivity of a 2 wt % SWNT composite decreased significantly (>10⁵) when the SWNTs were aligned, and this result was examined in terms of percolation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3333–3338, 2003     

Polymer‐dispersed liquid‐crystal materials fabricated with frontal polymerization

We report on the morphological and thermal properties of polymer‐dispersed liquid crystals (PDLCs) fabricated with frontal‐polymerization‐induced phase separation (FPIPS). Frontal polymerization is characterized by a rapid‐conversion, high‐temperature, and large‐thermal‐gradient environment. A comparison is made between the morphological and thermal properties of PDLCs fabricated with FPIPS and traditional thermal‐polymerization‐induced phase separation. Characterization includes differential scanning calorimetry to probe the glass and nematic‐to‐isotropic transitions and scanning electron microscopy to evaluate the phase‐separated morphology. In addition, the frontal temperatures and velocities are reported for PDLCs fabricated with frontal polymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 204–212, 2003     

Evaluation by Fourier Transform Infrared Spectroscopy of the different crystalline forms in syndiotactic polystyrene samples

Fourier transform infrared (FTIR) spectra of syndiotactic polystyrene (s-PS) semicrystalline samples have been examined by using the spectral subtraction approach. For the crystalline forms including trans-planar chains (trigonal α and orthorhombic β) a number of conformational and structural order effects, not previously described in the literature, have been identified. A method based on the results of the spectral subtraction analysis has been developed for the determination of the crystallinity degree and compared with the standard method based on the wide-angle X-ray diffraction patterns. The spectral subtraction analysis on FTIR spectra allows also an easy evaluation of the amount of α and β crystalline phases (often simultaneously present in melt-crystallized samples) although both contain chains in a same conformation. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1055–1066, 1997     

Poly(1‐butene)/clay nanocomposites: Preparation and properties

The preparation and properties of poly(1‐butene) (PB)/clay nanocomposites are described for the first time. Nanocomposites were prepared with the melt‐intercalation technique, using organically modified clay. The X‐ray diffraction patterns portrayed well‐defined diffraction peaks at higher d‐spacing than pristine clay, confirming the intercalation of polymer in silicate layers. Because PB exhibits time‐dependent polymorphism, the effect of clay on the phase transformation of PB was examined with thermal analysis. The phase transformation from a metastable tetragonal form to a stable hexagonal form was enhanced because of incorporation of layered silicates in the polymer matrix. The nanocomposites exhibited about a 40–140% increase in storage modulus depending on the clay content and significantly lower coefficient of thermal expansion. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1014–1021, 2003     

Synthesis and properties of soluble aromatic polyamides derived from 2,2′‐bis(4‐carboxyphenoxy)‐9,9′‐spirobifluorene

The synthesis of a new bis(ether carboxylic acid), 2,2′‐bis(4‐carboxyphenoxy)‐9,9′‐spirobifluorene, in which two orthogonally arranged carboxyphenoxyfluorene entities are connected through an sp³ carbon atom (the spiro center), is reported. The direct phosphorylation polycondensation of this diacid monomer with various aromatic diamines yields aromatic polyamides containing 9,9′‐spirobifluorene moieties in the main chain. The presence of the spiro segment restricts the close packing of the polymer chains and decreases interchain interactions, resulting in amorphous polyamides with enhanced solubility, and high glass‐transition temperatures and good thermal stability are maintained through controlled segmental mobility. The glass‐transition temperatures of these polyamides are in the range of 234–306 °C, with 10% weight losses occurring at temperatures above 530 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1160–1166, 2003     

Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

Synthesis of autophotosensitive hyperbranched polyimides based on 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride and 1,3,5‐tris(4‐aminophenoxy)benzene via end capping of the terminal anhydride groups by ortho‐alkyl aniline

Benzophenone‐containing, anhydride‐terminated hyperbranched poly(amic acid)s were end‐capped by ortho‐alkyl aniline in situ and then chemically imidized, yielding autophotosensitive hyperbranched polyimides. The polyimides were soluble in strong polar solvents, such as N‐methyl‐2‐pyrrolidone, N‐dimethylformamide, dimethylacetamide, and dimethyl sulfoxide. Thermogravimetric analysis revealed their excellent thermal stability, with a 5 wt % thermal loss temperature in the range of 527–548 °C and a10 wt % thermal loss temperature in the range of 562–583 °C. The strong absorption of the polyimide films in ultraviolet–visible spectra at 365 nm indicated that the hyperbranched polyimides were patternable. Highly resolved images with a line width of 6 μm were developed by ultraviolet exposure of the polymer films. A well‐defined image with lines as thin as 3 μm was also patterned, but the lines were rounded at the edges. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2026–2035, 2003     

Intimate blend of poly(ethylene terephthalate) and poly(ethylene 2,6‐naphthalate) via formation with and coalescence from their common inclusion compound with γ‐cyclodextrin

The experimental procedures to place poly(ethylene 2,6‐naphthalate) (PEN) guest molecules within γ‐cyclodextrin (γ‐CD) host molecules are described along with the subsequent verification of inclusion‐compound (IC) formation. In addition, the simultaneous complexing of PEN and poly(ethylene terephthalate) (PET) with γ‐CD to form their common IC is documented. Coalescence from their common γ‐CD IC generates an intimate blend of the PET and PEN polymers contained therein. Thermal analysis via differential scanning calorimetry reveals thermal behavior indicative of an intimate blend of PET and PEN. ¹H NMR analysis confirms that the intimate blending of PET and PEN achieved by coalescence from their common γ‐CD IC is not due to transesterification into a PET/PEN copolymer during thermal analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 139–148, 2003     

Dispersion and distribution of organically modified montmorillonite in nylon‐66 matrix

Nylon‐66 nanocomposites were prepared by melt‐compounding nylon‐66 with an alkyl ammonium surfactant pretreated montmorillonite (MMT). The thermal stability of the organic MMT powders was measured by thermogravimetric analysis. The decomposition of the surfactant on the MMT occurred from 200 to 500 °C. The low onset decomposition temperature of the organic MMT is one shortcoming when it is used to prepare polymer nanocomposites at high melt‐compounding temperatures. To provide greater property enhancement and better thermal stability of the polymer/MMT nanocomposites, it is necessary to develop MMT modified with more thermally stable surfactants. The dispersion and spatial distribution of the organic MMT layers in the nylon‐66 matrix were characterized by X‐ray diffraction. The organic MMT layers were exfoliated but not randomly dispersed in the nylon‐66 matrix. A model was proposed to describe the spatial distribution of the organic MMT layers in an injection‐molded rectangular bar of nylon‐66/organic MMT nanocomposites. Most organic MMT layers were oriented in the injection‐molding direction. Layers near the four surfaces of the bar were parallel to their corresponding surfaces; whereas those in the bulk differed from the near‐surface layers and rotated themselves about the injection‐molding direction. The influence of the spatial distribution of the organic MMT on crystallization of nylon‐66 was also investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1234–1243, 2003     

Living free‐radical polymerization (reversible addition–fragmentation chain transfer) of 6‐[4‐(4′‐methoxyphenyl)phenoxy]hexyl methacrylate: A route to architectural control of side‐chain liquid‐crystalline polymers

Side‐chain liquid‐crystalline polymers of 6‐[4‐(4′‐methoxyphenyl)phenoxy]hexyl methacrylate with controlled molecular weights and narrow polydispersities were prepared via reversible addition–fragmentation chain transfer (RAFT) polymerization with 2‐(2‐cyanopropyl) dithiobenzoate as the RAFT agent. Differential scanning calorimetry studies showed that the polymers produced via the RAFT process had a narrower thermal stability range of the liquid‐crystalline mesophase than the polymers formed via conventional free‐radical polymerization. In addition, a chain length dependence of this stability range was found. The generated RAFT polymers displayed optical textures similar to those of polymers produced via conventional free‐radical polymerization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2949–2963, 2003