Stereoregular uniform polymers

Progress in stereospecific living polymerizations of methacrylate monomers and the concept and realization of “uniform polymers” and “uniform polymer architectures” are described, with particular emphasis on the fusion of polymer synthesis and characterization and their interactive stimulation, which are inevitable not only for the formation of polymers with highly controlled structures but also for the development of polymer characterization, thereby bringing about the spiral progress of both fields. First, three types of stereospecific living polymerizations are described, including formation of 100% isotactic poly(methyl methacrylate) (PMMA), 98% syndiotactic PMMA, and 96% heterotactic PMMA. Supercritical fluid chromatography (SFC) has proven useful for isolating uniform polymers from these stereoregular PMMAs with narrow molecular weight distributions. Living nature of these stereospecific polymerizations is further utilized for the synthesis of end‐functionalized stereoregular polymers, which are separated into uniform end‐functionalized polymers and used to construct more elaborated uniform polymer architectures such as stereoblock, star, and comb polymers. The uniform polymers have proven quite useful for the studies on the relationship between structures and properties such as glass transition temperature, melting temperature, and solution viscosity. In addition to this, stereoregular uniform polymers are particularly important to understand stereocomplex formation between isotactic and syndiotactic uniform PMMAs. On‐line GPC/NMR measurement at 750 MHz and −15°C in acetone/acetone‐d₆ allowed definitive determination of the compositions of the complexed species and noncomplexed species separately, but not in average. Also interesting is the stereocomplex formation of uniform stereoblock PMMA, where intramolecular complexation in addition to an intermolecular complexation was distinctively observed by GPC analysis in acetone. Uniform star and comb PMMAs were also prepared and found useful to discuss the effect of branching on the solution viscosity. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 245–260, 1999     

Identification of a stereoblock poly(methyl methacrylate) sample with a stereocomplex

Acid hydrolysis of a stereoblock poly(methyl methacrylate) sample leads to a mixture of isotactic and syndiotactic poly(methacrylic acid) which can be separated by electrophoresis. The experiment confirms the stereochemical identity between the so-called “stereoblock” poly(methyl methacrylate) and the stereocomplex which syndiotactic and isotactic poly(methyl methacrylate) form in the ratio 2:1. A possible mechanism of replica polymerization is suggested to account for this effect.     

Methacrylic acid and methyl methacrylate oligomers adsorbed to porous isotactic poly(methyl methacrylate) ultrathin films and mechanistic studies of living template polymerization

Methacrylic acid (MAA), methyl methacrylate (MMA), methacrylamide, and oligomers of MAA and MMA were selected as a model of active radical species in living template polymerization using stereocomplex formation. The adsorption behaviors of the aforementioned model compounds were examined toward porous isotactic‐(it‐) poly(methyl methacrylate) (PMMA) ultrathin films on a quartz crystal microbalance, which was prepared by the extracting of syndiotactic‐(st‐) poly(methacrylic acid) (PMAA) from it‐PMMA/st‐PMAA stereocomplexes. The apparent predominant adsorption of oligomers to monomers was observed in both PMAA and PMMA oligomers, suggesting that the mechanism of template polymerization follows the pick up mechanism. Although vinyl monomers were not incorporated into the porous it‐PMMA ultrathin film, both PMMA and PMAA oligomers were adsorbed at the initial stages. However, adsorbed amounts were limited to about 5 and 15% at 0.1 mol L^?1, respectively, which are much smaller values than corresponding st‐polymers. The results imply that radical coupling reaction is prevented during template polymerization to support the resulting living polymerization. ATR‐IR spectral patterns of oligomer complexes and it‐PMMA slightly changed in both cases, suggesting complex formation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5879–5886, 2008     

Anionic polymerization of biomass‐derived furfuryl methacrylate: Controlling polymer tacticity and thermoreversibility

Biomass‐derived furfuryl methacrylate (FMA) has been successfully polymerized for the first time by anionic polymerization to produce atactic (at‐), isotactic (it‐), or syndiotactic (st‐) poly(furfuryl methacrylate) (PFMA), depending on initiator structure and reaction conditions. Thermal properties of the PFMA materials are strongly affected by the polymer tacticity. Most notably, while both isotactic and syndiotactic polymers can undergo inter‐ or intrachain crosslinking reactions when heated to 290 °C, there is no evidence for the atactic polymer to perform the same reaction. Furthermore, the PFMA tacticity also greatly affects the amount of stable carbonaceous materials it produces when heated to 650 °C, with st‐PFMA forming the largest amount of such materials (26.9%), as compared to only 5.6% by at‐PFMA. Using the Diels–Alder (DA) “click reaction” between the reactive furfuryl group within the PFMA polymers as the diene equivalent and a bismaleimide as the dienophile, thermoreversible smart polymers have been successfully prepared. Thermoreversibility of the preformed crosslinked polymers has been demonstrated, thanks to the facile retro‐DA reaction upon heating and the DA reaction upon cooling of such self‐healing materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2793–2803     

Star‐shaped polymers having side chain poss groups for solid polymer electrolytes; synthesis,thermal behavior,dimensional stability,and ionic conductivity

A series of organic/inorganic hybrid star‐shaped polymers were synthesized by atom transfer radical polymerization using 3‐(3,5,7,9,11,13,15‐heptacyclohexyl‐pentacyclo[9.5.1.1^3,9.1^5,15.1^7,13]‐octasiloxane‐1‐yl)propyl methacrylate (MA‐POSS) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) as monomers and octakis(2‐bromo‐2‐methylpropionoxypropyldimethylsiloxy)octasilsesquioxane as an initiator. Star‐shaped polymers with methyl methacrylate (MMA) and PEGMA moieties were also prepared for comparison purposes. Dimensionally stable freestanding film could be obtained from the hybrid star‐shaped polymer containing 26 wt % of MA‐POSS moieties although its glass transition temperature is very low, ?60.9 °C. As a result, the hybrid star‐shaped polymer electrolyte containing lithium bis(trifluoromethanesulfonyl)imide showed ionic conductivities (1.75 × 10^?5 S/cm at 30 °C), which were two orders of magnitude higher than those of the star‐shaped polymer electrolyte with MMA moieties. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Isospecific polymerizations of alkyl methacrylates with a bis(alkyl)Yb complex and formation of stereocomplexes with syndiotactic poly(alkyl methacrylate)s

Yb[C(SiMe₃)₃]₂ initiates the living polymerization of methyl methacrylate (MMA) at −78°C to give the polymer with M_n of 51.0×10⁴ (M_w/M_n=1.1) and high isotacticity (97%) in a quantitative yield. Mixing of the acetone solution of resulting polymer (M_n=16.3×10⁴) with the acetone solution of syndiotactic poly(MMA) (M_n=15.7×10⁴) prepared by the (C₅Me₅)₂SmMe(THF) initiator produces desired stereocomplex in high yield bearing very high T_m whose tensile modulus is higher than the respective isotactic and syndiotactic poly(MMA)s. Yb[C(SiMe₃)₃]₂ also generated isotactic (98%) poly[2-(dimethylamino)ethyl methacrylate] (DMEMA), and (C₅Me₅)₂SmMe(THF) affords the syndiotactic (97%) polymer in high yields. The combination of isotactic poly(MMA)-block-poly(DMEMA) (97/3) and syndiotactic poly(MMA)-block-poly(DMEMA) (97/3) provides the amphiphathic stereocomplex. In sharp contrast to the catalysis of Yb[C(SiMe₃)₃]₂ in toluene, the addition of THF or HMPA resulted in the formation of syndio-rich poly(MMA).     

Polymerization of (E)‐1,3‐Pentadiene and (E)‐2‐methyl‐1,3‐pentadiene with neodymium catalysts: Examination of the factors that affect the stereoselectivity

(E)‐1,3‐Pentadiene (EP) and (E)‐2‐methyl‐1,3‐pentadiene (2MP) were polymerized to cis‐1,4 polymers with homogeneous and heterogeneous neodymium catalysts to examine the influence of the physical state of the catalyst on the polymerization stereoselectivity. Data on the polymerization of (E)‐1,3‐hexadiene (EH) are also reported. EP and EH gave cis‐1,4 isotactic polymers both with the homogeneous and with the heterogeneous system, whereas 2MP gave an isotactic cis‐1,4 polymer with the heterogeneous catalyst and a syndiotactic cis‐1,4 polymer, never reported earlier, with the homogeneous one. For comparison, the results obtained with the soluble CpTiCl₃‐based catalyst (Cp = cyclopentadienyl), which gives cis‐1,4 isotactic poly(2MP), are examined. A tentative interpretation is given for the mechanism of the formation of the stereoregular polymers obtained and a complete NMR characterization of the cis‐1,4‐syndiotactic poly(2MP) is reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3227–3232     

Effect of temperature and solvent on polymer tacticity in the free‐radical polymerization of styrene and methyl methacrylate

The effect of temperature and solvent on polymer tacticity in free‐radical polymerization of styrene and methyl methacrylate was studied by ¹³C and ¹H NMR, respectively. Polystyrene shows a mild syndiotactic tendency (P_m = 0.36 ± 0.02) that is independent of temperature over a wide range (?10 to 120 °C), while poly(methyl methacrylate) shows a stronger syndiotactic tendency (P_m = 0.17 ± 0.01 at 30 °C) that decreases as temperature is increased (P_m = 0.22 ± 0.02 at 80 °C). None of the polymerization solvents studied (bulk, THF, DMF, DMSO, acetonitrile, and acetone) had a significant effect on polymer tacticity in either system. The triad fractions of both polymers showed deviations from the Bernoulli model, implying that the antepenultimate unit affects the propagation reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3351–3358     

Stereospecific polymerization of 9-fluorenyl methacrylate: Tacticity effects on the thermal and photophysical properties of the polymers

Poly(9-fluoreneyl methacrylate) was obtained through anionic polymerization with t-BuLi and t-BuMgBr and through radical polymerization with α,α′-azobisisobutyronitrile. Anionic polymerization with t-BuLi in tetrahydrofuran and radical polymerization afforded syndiotactic polymers (rr ∼ 90%), whereas anionic polymerization with Li and Mg initiators in toluene and CH₂Cl₂ led to isotactic polymers. The thermal and photophysical properties of the polymers were examined. A syndiotactic polymer tended to show higher glass transition and decomposition temperatures than an isotactic polymer. However, polymers with different tacticities were not likely to assume specific, distinctive conformations such as a helix or a π-stacked conformation in solution. An isotactic polymer showed stronger interactions in a CH₂Cl₂ solution with 2,4,7-trinitro-9-fluorenylidenemalononitrile, an electron-acceptor molecule, than a syndiotactic polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4656–4665, 2004     

Stereospecific Cyclic Poly(methyl methacrylate) and Its Topology‐Guided Hierarchically Controlled Supramolecular Assemblies

In this study, the stereocomplexation between a novel stereospecific cyclic vinyl polymer, that is, cyclic syndiotactic poly(methyl methacrylate) (st‐PMMA), with the complementary linear isotactic (it‐) PMMA was investigated. Surprising new insight into the effects of the topology (i.e., end groups), size, and tacticity of the assembling components on stereocomplex formation was obtained. Characterization of the stereocomplexes revealed that the self‐assembly of cyclic st‐PMMAs and linear it‐PMMAs resulted in the formation of an unprecedented “polypseudorotaxane‐type” supramolecular assembly. This stereocomplex exhibited remarkably different physical properties as compared to the conventional PMMA triple‐helix stereocomplex as a result of the restricted topology imposed by the cyclic st‐PMMA assembling component.     

Stereochemistry of oligomers in stereospecific and conformational specific ionic polymerizations

Low molecular weight oligomers of methyl methacrylate (MMA) and perhaloacetaldehyde were studied as to their composition, end groups and stereochemistry. The oligomerization of methyl methacrylate can be directed toward almost pure isotactic or toward almost syndiotactic oligomers depending upon the intitiating system used. Perhaloacetaldehydes showed a stereospecificity which depended upon the size and bulkiness of the side group in the polymer chain. There is no dependence of the sterospecificity based on the initiating system and only isotactic polymers could be obtained which are not only stereospecific but also conformationally specific giving conformational specific isotactic 4/1 helices.     

Multiarm star block copolymers via Diels‐Alder click reaction

Two types of multiarm star block copolymers: (polystyrene)_m‐poly(divinylbenzene)‐poly(methyl methacrylate)_n, (PS)_m‐polyDVB‐(PMMA)_n and (polystyrene)_m‐poly(divinylbenzene)‐poly(tert‐butyl acrylate)_k, (PS)_m‐polyDVB‐(PtBA)_k were successfully prepared via a combination of cross‐linking and Diels–Alder click reactions based on “arm‐first” methodology. For this purpose, multiarm star polymer with anthracene functionality as reactive periphery groups was prepared by a cross‐linking reaction of divinyl benzene using α‐anthracene end functionalized polystyrene (PS‐Anth) as a macroinitiator. Thus, obtained multiarm star polymer was then reacted with furan protected maleimide‐end functionalized polymers: PMMA‐MI or PtBA‐MI at reflux temperature of toluene for 48 h resulting in the corresponding multiarm star block copolymers via Diels–Alder click reaction. The multiarm star and multiarm star block copolymers were characterized by using ¹H NMR, SEC, Viscotek triple detection SEC (TD‐SEC) and UV. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 178–187, 2009     

Synthetic Uniform Polymers and Their Use for Understanding Fundamental Problems in Polymer Chemistry

Summary: A uniform polymer is a polymer composed of molecules that are uniform with respect to molecular weight and constitution. Besides natural uniform polymers such as nucleic acids and polypeptide, synthetic uniform polymers have been obtained by a variety of approaches. In particular, a combination of living polymerization and supercritical fluid chromatography (SFC) separation is one of the promising ways for the preparation of uniform polymers. End‐functionalized uniform polymers enabled us to prepare uniform polymer architectures such as block, graft, comb, and star polymers. Their use for understanding the fundamental problems in polymer chemistry is discussed; topics include crystallization of polymers, chain conformation in solution, and association of stereoregular polymers in solution.

SFC traces of isotactic PMMA containing an authentic sample of the 45‐mer (a) and of the isolated uniform PMMA of 100‐mer (b).     

PMMA stereocomplex: Study of the aggregation process by electron microscopy

The structure of stereocomplex aggregates formed from isotactic and syndiotactic poly (methyl methacrylate)s was studied in tetrahydrofuran (THF) by transmission electron microscopy (TEM). We have found that the primary stereocomplex particles are nearly spherical and, as the complexation advances, the particles lengthen. Eventually aggregates branch to form a three-dimensional network.     

Preparation and (13C)NMR spectroscopy of stereoregular poly(methacrylic acid)

Several procedures for synthesis of stereoregular poly(methacrylic acid) have been examined and the polymer characterized by (¹³C)NMR. Using d⁶ DMSO as solvent for spectroscopy gives better spectra than those previously obtained using aqueous solutions and stereochemical splittings can be resolved in the methyl signals. Free-radical polymerization in toluene solution is a Bernouilli process giving mainly heterotactic/syndiotactic polymer. Polymers produced with free-radical initiation in aqueous solution have a higher, and pH dependent, content of syndiotactic triads. A previously described procedure for producing regular polymers by hydrolysis of poly(trimethylsilyl methacrylate) requires modification to produce isotactic contents of above 90% and does not give truly syndiotactic polymer. In contrast, polymerization with γ-radiation can produce polymers with close to 90% of syndiotactic triads.     

Preparation of 3‐arm star polymers (A3) via Diels–Alder click reaction

Diels–Alder click reaction was successfully applied for the preparation of 3‐arm star polymers (A₃) using furan protected maleimide end‐functionalized polymers and trianthracene functional linking agent (2) at reflux temperature of toluene for 48 h. Well‐defined furan protected maleimide end‐functionalized polymers, poly (ethylene glycol), poly(methyl methacrylate), and poly(tert‐butyl acrylate) were obtained by esterification or atom transfer radical polymerization. Obtained star polymers were characterized via NMR and GPC (refractive index and triple detector detection). Splitting of GPC traces of the resulting polymer mixture notably displayed that Diels–Alder click reaction was a versatile and a reliable route for the preparation of A₃ star polymer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 302–313, 2008     

Syntheses and characterization of 16‐arm star and star diblock copolymer and AB8 9‐miktoarm star copolymer via NMRP and ROP from dendritic multifunctional macroinitiators

A dendritic macroinitiator having 16 TEMPO‐based alkoxyamines, Star‐16 , was prepared by the reaction of a dendritic macroinitiator having eight TEMPO‐based alkoxyamines, [G‐3]‐OH , with 4,4′‐bis(chlorocarbonyl)biphenyl. The nitroxide‐mediated radical polymerization (NMRP) of styrene (St) from Star‐16 gave 16‐arm star polymers with PDI of 1.19–1.47, and NMPR of 4‐vinylpyridine from the 16‐arm star polymer gave 16‐arm star diblock copolymers with PDI of 1.30–1.43. The ring‐opening polymerization of ε‐caprolactone from [G‐3]‐OH and the subsequent NMRP of St gave AB₈ 9‐miktoarm star copolymers with PDI of 1.30–1.38. The benzyl ether linkages of the 16‐arm star polymers and the AB₈ 9‐miktoarm star copolymers were cleaved by treating with Me₃SiI, and the resultant poly(St) arms were investigated by size exclusion chromatography (SEC). The SEC results showed PDIs of 1.23–1.28 and 1.18–1.22 for the star polymers and miktoarm stars copolymers, respectively, showing that they have well‐controlled poly(St) arms. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1159–1169, 2007.     

Nanoprecipitation of poly(methyl methacrylate)‐based nanoparticles: Effect of the molar mass and polymer behavior

The current investigation describes in detail the influence of the polymer molar mass as well as polymer‐solvent interactions on the formation of nanoparticles using the nanoprecipitation methodology. For this purpose, a homologous series of poly(methyl methacrylate)s with molar masses ranging from 7,700 to 274,000 g mol^?1 was prepared. Subsequently nanoprecipitation was performed in an automated and systematic manner using liquid handling robots and a variation of different initial concentrations of the polymers and solvent/nonsolvent ratios. To elucidate information about the polymer behavior in the solvents used for the nanoprecipitation procedure (acetone, tetrahydrofuran), intrinsic viscosity measurements were performed. The nanoparticle formulations were examined in terms of particle size and size distribution, particle shape as well as zeta‐potential. The conditions for the preparation of stable and uniform nanoparticles, regardless of molar mass and hydrodynamic volume of the initial polymer, were determined. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Optoeletronic properties of poly(N‐alkenyl‐carbazole)s driven by polymer stereoregularity

Stereoregular polymers like isotactic poly(N‐butenyl‐carbazole) (i‐PBK), isotactic and syndiotactic poly(N‐pentenyl‐carbazole) (i‐PPK and s‐PPK), and poly(N‐hexenyl‐carbazole) (i‐PHK and s‐PHK) are synthesized using the stereospecific homogeneous “single site” Ziegler‐Natta (Z‐N) catalysts: rac‐dimethylsilylbis(1‐indenyl)zirconium dichloride ( 1 )/methylaluminoxane (MAO) and diphenylmethylidene(cyclopentadienyl)‐(9‐fluorenyl)zirconium dichloride ( 2 )/MAO. Catalytic activity is rationalized by density functional theory (DFT) calculations. All synthesized polymers are fully characterized by NMR, thermal, wide‐angle X‐ray diffraction, and fourier transform infrared spectroscopy analysis. Fluorescence measurements on isotactic and syndiotactic polymer films indicate that all polymers give rise to excimers, both “sandwich‐like” and “partially overlapping.” Excimer formation is essentially driven by the polymer tacticity. Isotactic polymers generate both sandwich‐like and partially overlapping excimers, while syndiotactic polymers give rise especially to partially overlapping ones. A theoretical combined molecular dynamics–time dependent DFT approach is also used to support the experimental results. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 242–251     

Synthesis of AB3‐type miktoarm star polymers with steroid core via a combination of “Click” chemistry and ring opening polymerization techniques

Well‐defined AB₃‐type miktoarm star‐shaped polymers with cholic acid (CA) core were fabricated with a combination of “click” chemistry and ring opening polymerization (ROP) methods. Firstly, azide end‐functional poly(ethylene glycol) (mPEG), poly(methyl methacrylate) (PMMA), polystyrene (PS), and poly(ε‐caprolactone) (PCL) polymers were prepared via controlled polymerization and chemical modification methods. Then, CA moieties containing three OH groups were introduced to these polymers as the end groups via Cu(I)‐catalyzed click reaction between azide end‐functional groups of the polymers ( mPEG‐N₃ , PMMA‐N₃ , PS‐N₃ , and PCL‐N₃ ) and ethynyl‐functional CA under ambient conditions, yielding CA end‐functional polymers ( mPEG‐Cholic , PMMA‐Cholic , PS‐Cholic , and PCL‐Cholic ). Finally, the obtained CA end‐capped polymers were employed as the macroinitiators in the ROP of ε‐caprolactone (ε‐CL) yielding AB₃‐type miktoarm star polymers ( mPEG‐Cholic‐PCL₃ , PMMA‐Cholic‐PCL₃ , and PS‐Cholic‐PCL₃ ) and asymmetric star polymer [ Cholic‐(PCL)₄ ]. The chemical structures of the obtained intermediates and polymers were confirmed via Fourier transform infrared and ¹H nuclear magnetic resonance spectroscopic techniques. Thermal decomposition behaviors and phase transitions were studied in detail using thermogravimetric analysis and differential scanning calorimetry experiments. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3390–3399