Vertical confinement and interface effects on the microstructure and charge transport of P3HT thin films

Using X-ray diffraction-based pole figures, we present quantitative analysis of the microstructure of poly(3-hexylthiophene) thin films of varying thicknesses, which allows us to determine the crystallinity and microstructure at the semiconductor-dielectric interface. We find that the interface is approximately one fourth as crystalline as the bulk of the material. Furthermore, the use of a self-assembled monolayer (SAM) enhances the density of interface-nucleated crystallites by a factor of ∼20. Charge transport measurements as a function of film thickness correlate with interface crystallinity. Hence, we establish the crucial role of SAMs as nucleating agents for increasing carrier mobility in field-effect devices. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Synergistic Effects of Self-Assembled Monolayers in Solution-Processed 6,13-Bis(triisopropylsilylethynyl)Pentacene Transistors

Organic semiconductors are highly interface-sensitive, and therefore chemical functionalization using self-assembled monolayers (SAMs) is often adopted to tailor their properties. This study clarifies the synergistic effects of electrode and dielectric SAMs on the behavior of solution-processed organic field-effect transistors (OFETs). Utilization of a self-consistent device model enables a physically robust treatment of the measured electrical characteristics of the OFETs, thus providing highly reliable materials, interface, morphology, and transport parameters. These parameters are further extended and correlated to build a comprehensive picture on trap energy and injection-transport relationship, finally revealing a set of fundamental insights into chemically modified OFETs.     

Theoretical comparative studies on transport properties of pentacene,pentathienoacene, and 6,13‐dichloropentacene

Pentacene derivative 6,13‐dichloropentacene (DCP) is one of the latest additions to the family of organic semiconductors with a great potential for use in transistors. We carry out a detailed theoretical calculation for DCP, with systematical comparison to pentacene, pentathienoacene (PTA, the thiophene equivalent of pentacene), to gain insights in the theoretical design of organic transport materials. The charge transport parameters and carrier mobilities are investigated from the first‐principles calculations, based on the widely used Marcus electron transfer theory and quantum nuclear tunneling model, coupled with random walk simulation. Molecular structure and the crystal packing type are essential to understand the differences in their transport behaviors. With the effect of molecule modification, significant one‐dimensional π‐stacks are found within the molecular layer in PTA and DCP crystals. The charge transport along the a‐axis plays a dominant role for the carrier mobilities in the DCP crystal due to the strong transfer integrals within the a‐axis. Pentacene shows a relatively large 3D mobility. This is attributed to the relatively uniform electronic couplings, which thus provides more transport pathways. PTA has a much smaller 3D mobility than pentacene and DCP for the obvious increase of the reorganization energy with the introduction of thiophene. It is found that PTA and DCP exhibit lower HOMO (highest occupied molecular orbital) levels and better environmental stability, indicating the potential applications in organic electronics. © 2015 Wiley Periodicals, Inc.     

并五苯及其衍生物在有机场效应晶体管中的应用

有机场效应晶体管（organic field—effect transistors,OFETs）是以有机半导体材料作为有源层,通过电场控制电流的电子器件．与传统的无机半导体器件相比,由于其可应用于生产大面积、柔性、低成本电子设备而备受关注,在有机存储器件、有机太阳能电池、柔性平板显示和电子纸等众多领域具有潜在而广泛的应用前景．并苯类材料因其紧密的分子堆积及优异的半导体性能被广泛研究．其中,并五苯及其衍生物在场效应晶体管中表现出良好的性质,其效果甚至可以与非晶硅相媲美,但并五苯较差的溶解性及环境稳定性阻碍了其进一步应用．科研工作者通过对分子结构进行修饰改造设计,合成了一系列并五苯的衍生物,其不仅在稳定性、电学性能和溶解性方面有很大提高,还可以将该p-型半导体材料拓展到双极性及n-型半导体材料领域．本文对并五苯及其衍生物在有机场效应晶体管中的应用进行了较为全面的综述,期望对该领域的研究起到一定的推动作用．     

High performance semiconducting polymers containing bis(bithiophenyl dithienothiophene)‐based repeating groups for organic thin film transistors

New dithienothiophene‐containing conjugated polymers, such as poly(2,6‐bis(2‐thiophenyl‐3‐dodecylthiophene‐2‐yl)dithieno[3,2‐b;2′,3′‐d]thiophene, 4 and poly(2,6‐bis (2‐thiophenyl‐4‐dodecylthiophene‐2‐yl)dithieno[3,2‐b;2′,3′‐d]thiophene, 8 have been successfully synthesized via Stille coupling reactions using dodecyl‐substituted thiophene‐based monomers, bistributyltin dithienothiophene, and bistributyltin bithiophene; these polymers have been fully characterized. The main difference between the two polymers is the substitution position of the dodecyl side chains in the repeating group. Grazing‐incidence X‐ray diffraction (GI‐XRD) gave clear evidence of edge‐on orientation of polycrystallites to the substrate. The semiconducting properties of the two polymers have been evaluated in organic thin film transistors (OTFTs). The two conjugated polymers 4 and 8 exhibit fairly high hole carrier mobilities as high as μ_ave = 0.05 cm²/Vs (I_ON/OFF = 3.42 × 10⁴) and μ_ave = 0.01 cm²/Vs, (I_ON/OFF = 1.3 × 10⁵), respectively, after thermal annealing process. The solvent annealed films underwent reorganization of the molecules to induce higher crystallinity. Well‐defined atomic force microscopy (AFM) topography supported a significant improvement in TFT device performance. The hole carrier mobilities of the solvent annealed films are comparable to those obtained for a thermally annealed sample, and were one‐order higher than those obtained with a pristine sample. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Organic semiconductors for solution-processable field-effect transistors (OFETs)

The cost-effective production of flexible electronic components will profit considerably from the development of solution-processable, organic semiconductor materials. Particular attention is focused on soluble semiconductors for organic field-effect transistors (OFETs). The hitherto differentiation between "small molecules" and polymeric materials no longer plays a role, rather more the ability to process materials from solution to homogeneous semiconducting films with optimal electronic properties (high charge-carrier mobility, low threshold voltage, high on/off ratio) is pivotal. Key classes of materials for this purpose are soluble oligoacenes, soluble oligo- and polythiophenes and their respective copolymers, and oligo- and polytriarylamines. In this context, micro- or nanocrystalline materials have the general advantage of somewhat higher charge-carrier mobilities, which, however, could be offset in the case of amorphous, glassy materials by simpler and more reproducible processing.     

Strongly Correlated Alignment of Fluorinated 5,11‐Bis(triethylgermylethynyl)anthradithiophene Crystallites in Solution‐Processed Field‐Effect Transistors

The crystallinity of an organic semiconductor film determines the efficiency of charge transport in electronic devices. This report presents a micro‐to‐nanoscale investigation on the crystal growth of fluorinated 5,11‐bis(triethylgermylethynyl)anthradithiophene (diF‐TEG‐ADT) and its implication for the electrical behavior of organic field‐effect transistors (OFETs). diF‐TEG‐ADT exhibits remarkable self‐assembly through spin‐cast preparation, with highly aligned edge‐on stacking creating a fast hole‐conducting channel for OFETs.     

Effect of n‐type doping on the hole transport in poly(p‐phenylene vinylene)

N‐type doping of poly(2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐p‐phenylene vinylene) (MEH‐PPV) with decamethylcobaltocene (DMC) strongly improves the electron transport due to filling of the electron traps. Unexpectedly, the n‐type doping simultaneously suppresses the hole transport in MEH‐PPV. We demonstrate that this strong reduction of the hole transport originates from unionized DMC molecules that act as hole traps. This hole trapping effect explains why the current of a DMC‐doped MEH‐PPV polymer light‐emitting diode is orders of magnitude lower than that of the undoped device. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Pyromellitic diimide‐based copolymers for ambipolar field‐effect transistors: Synthesis,characterization, and device applications

A pyromellitic diimide building block, 2,6‐bis(2‐decyltetradecyl)?4,8‐di(thiophen‐2‐yl)pyrrolo[3,4‐f]isoindole‐1,3,5,7(2H,6H)‐tetraone ( 4 ), is synthesized. Based on this building block and other electron‐rich units such as 2,2′‐bithiophene, thieno[3,2‐b]thiophene and 4,8‐bis(dodecyloxy)benzo[1,2‐b:4,5‐b′]dithiophene, three conjugated polymers P1 , P2 , and P3 are prepared in good yield via Stille coupling polymerization. These new copolymers have good solubility in common organic solvents and exhibit good thermal stability. The optical, electrochemical, and thermal properties of these polymers P1–P3 are carefully investigated, and their applications in solution‐processed organic field‐effect transistors are also studied. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2454–2464     

Correlation of charge transport with structural order in highly ordered melt‐crystallized poly(3‐hexylthiophene) thin films

A series of well‐defined poly(3‐hexylthiophene)s (P3HT) of different molecular weight (MW) and high regioregularity was investigated for charge transport properties in as‐cast and melt‐crystallized films. The semicrystalline structure of the P3HT was characterized by X‐ray scattering and Atomic force microscopy. Crystallization by cooling from the melt led to a substantial increase in crystallinity and a stronger alignment of the crystals in comparison to as‐cast films. The increase in crystallinity went along with an increase in hole mobility of up to an order of magnitude as measured by the space charge limited current method. Additionally, the hole mobility depended on the long period of P3HT lamellae and consequently on the MW. In compliance with the long period, the charge carrier mobility first increased with the MW before decreasing again at the onset of chain folding. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 943–951     

Tetrachlorinated Tetraazaperopyrenes (TAPPs): Highly Fluorescent Dyes and Semiconductors for Air‐Stable Organic n‐Channel Transistors and Complementary Circuits

A range of 2,9‐perfluoroalkyl‐substituted tetraazaperopyrene (TAPP) derivatives ( 1 – 5 ) was synthesised by reacting 4,9‐diamino‐3,10‐perylenequinone diimine (DPDI) with the corresponding carboxylic acid chloride or anhydride in the presence of a base. The reaction of compounds 1 – 4 with dichloroisocyanuric acid (DIC) in concentrated sulphuric acid resulted in the fourfold substitution of the tetraazaperopyrene core, yielding the 2,9‐bisperfluoroalkyl‐4,7,11,14‐tetrachloro‐1,3,8,10‐tetraazaperopyrenes 6 – 9 , respectively. The optical and electrochemical data demonstrate the drastic influence of the core substitution on the properties. All compounds are highly luminescent (fluorescence quantum yields of up to Φ=0.8). The LUMO energies of the tetrachlorinated TAPP derivatives (determined by cyclic voltammetry and computed by DFT calulations) were found to be below ?4 eV. In the course of this work the performance of TAPP derivatives in organic thin‐film transistors (TFTs) was investigated, and their n‐channel characteristics with field‐effect mobilities of up to 0.14 cm² V^?1 s^?1 and an on/off current ratio of >10⁶ were confirmed. Long‐term stabilities of 3–4 months under ambient conditions of the devices were established. Complementary inverters and ring oscillators with n‐channel TFTs based on compound 8 and p‐channel TFTs based on dinaphtho‐[2,3‐b:2′,3′‐f]thieno[3,2‐b]thiophene (DNTT) were fabricated on a glass substrate.     

Structure and electrical properties of undoped oriented poly(phenylene vinylene) films

The influence of anisotropic structure on the electrical properties of undoped oriented poly(phenylene vinylene) (PPV) films was investigated with impedance spectroscopy and structural characterization. The oriented structure of the stretched PPV films was studied with wave-guide coupling and infrared dichroism. It was found that the unstretched PPV film had a highly planar structure, and one-way stretching converted the planar structure into a uniaxial structure. The impedance of undoped PPV thin films was measured along three different directions: through the film thickness direction, parallel to the stretch direction in the film plane, and perpendicular to the stretch direction in the film plane. Two relaxations were observed, one corresponding to the bulk behavior in the high-frequency range and the other to an interfacial contact polarization in the low-frequency range. From equivalent circuit modeling, it was found that the bulk conductivity through the film thickness direction decreased with increasing orientation, whereas the high-frequency dielectric constant through the film direction remained constant. In addition, the conductivities measured in the film plane were at least two orders of magnitude higher than the conductivity in the direction normal to the film surface. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 98–116, 2004     

Combining Fullerenes and Zwitterions in Non‐Conjugated Polymer Interlayers to Raise Solar Cell Efficiency

Polymer zwitterions were synthesized by nucleophilic ring‐opening of 3,3′‐(but‐2‐ene‐1,4‐diyl)bis(1,2‐oxathiolane 2,2‐dioxide) (a bis‐sultone) with functional perylene diimide (PDI) or fullerene monomers. Integration of these polymers into solar cell devices as cathode interlayers boosted efficiencies of fullerene‐based organic photovoltaics (OPVs) from 2.75 % to 10.74 %, and of non‐fullerene‐based OPVs from 4.25 % to 10.10 %, demonstrating the versatility of these interlayer materials in OPVs. The fullerene‐containing polymer zwitterion ( C₆₀‐PZ ) showed a higher interfacial dipole (Δ) value and electron mobility than its PDI counterpart ( PDI‐PZ ), affording solar cells with high efficiency. The power of PDI‐PZ and C₆₀‐PZ to improve electron injection and extraction processes when positioned between metal electrodes and organic semiconductors highlights their promise to overcome energy barriers at the hard‐soft materials interface of organic electronics.     

Characterisation and ac-electrical investigation of sublimated bis(dimethylglyoximato)palladium(II) thin films

Thin films of bis(dimethylglyoximato)palladium(II) complex of polycrystalline structure were prepared by sublimation in a vacuum at 140 °C, on glass and p-Si substrates. The films were characterised by spectral optical absorption, energy dispersion X-ray fluorescence (EDXRF), and X-ray diffraction (XRD) methods. After characterisation, metal-insulator (complex)-semiconductor MIS devices were fabricated to measure the frequency dependence of ac-conductivity in a range of 5-100 kHz. Data of ac-measurements follow the correlated barrier-hopping CBH model, from which one of the fundamental absorption peaks, the minimum hopping distance, and other parameters of the CBH model were determined, connecting and relating the optical, structural, and electrical measurements. The dielectric properties of the complex were studied through Debye model, from which the relaxation time for the dipoles (2.45 × 10⁻⁶ s) and the molecular dipole moment (3.63 × 10⁻³⁰ C m ) were determined.     

Simultaneous morphological stability and high charge carrier mobilities in donor–acceptor block copolymer/PCBM blends

Donor–acceptor block copolymers (BCP), incorporating poly(3‐hexylthiophene) (P3HT), and a polystyrene copolymer with pendant fullerenes (PPCBM) provide desired stable nanostructures, but mostly do not exhibit balanced charge carrier mobilities. This work presents an elegant approach to match hole and electron transport in BCP by blending with molecular PCBM without causing any macrophase separation. An insufficient electron mobility of PPCBM can be widely compensated by adding PCBM which is monitored by the space‐charge limited current method. Using X‐ray diffraction, atomic force microscopy, and differential scanning calorimetry, we verify the large miscibility of the PPCBM:PCBM blend up to 60 wt % PCBM load forming an amorphous, molecularly mixed fullerene phase without crystallization. Thus, blending BCP with PCBM substantially enhances charge transport achieving an electron mobility of μ_e=(3.2 ± 1.7) × 10^?4 cm²V^?1s^?1 and hole mobility of μ_h=(1.8 ± 0.6) × 10^?3 cm²V^?1s^?1 in organic field‐effect transistors (OFET). The BCP:PCBM blend provides a similarly high ambipolar charge transport compared to the established P3HT:PCBM system, but with the advantage of an exceptionally stable morphology even for prolonged thermal annealing. This work demonstrates the feasibility of high charge transport and stable morphology simultaneously in a donor–acceptor BCP by a blend approach. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1125–1136     

Synergistic Effects of Solvent Vapor Assisted Spin-coating and Thermal Annealing on Enhancing the Carrier Mobility of Poly(3-hexylthiophene) Field-effect Transistors

Poly(3-hexylthiophene)(P3 HT) thin films, obtained by normal spin-coating and solvent vapor assisted spin-coating(SVASP) before and after thermal annealing(TA), and the corresponding devices were prepared to unravel the microstructure-property relationship, which is of great importance for the development of organic electronics. When SVASP-TA films were used as the active layers of the organic field-effect transistors,a hole mobility up to 0.38 cm²·V^–1·s^–1 was ac...     

Dithienylmethanone‐Based Cross‐Conjugated Polymer Semiconductors: Synthesis,Characterization, and Application in Field‐Effect Transistors

Herein, we report the synthesis, characterization, and field‐effect properties of two cross‐conjugated dithienylmethanone (DMO)‐based alternating polymers, namely, PDMO‐S and PDMO‐Se . Both polymers possess high thermal stability, good solubility, and broad absorption spectra. Their electrochemical properties were investigated using cyclic voltammetry, indicating that PDMO‐Se has higher HOMO/LUMO energy levels of −5.49/−3.49 eV than −5.57/−3.58 eV of PDMO‐S . The two polymers exhibited promising charge transport properties with the highest hole mobility of 0.12 cm² V⁻¹ s⁻¹ for PDMO‐S and 0.025 cm² V⁻¹ s⁻¹ for PDMO‐Se . AFM and 2D‐GIXRD analyses demonstrated that the PDMO‐S formed lamellar, edge‐on packing thin film with close π‐π stacking. These findings suggest that cross‐conjugated polymers might be potential semiconducting materials for low‐cost and flexible organic electronics. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1012–1019     

Thermal and environmental stability of poly(4-ethynyl-p-xylylene-co-p-xylylene) thin films

The aim of this paper was to test the thermal and environmental stability of poly(4-ethynyl-p-xylyleneco-p-xylylene) thin films prepared by chemical vapor deposition(CVD) and to optimize the reaction conditions of the polymer.Fourier transformed infrared spectroscopy(FTIR),thermogravimetric analysis(TGA) and fluorescence microscopy were employed to investigate the stability of the reactive polymer coatings in various environmental conditions.Chemical reactivity of the thin films were then tested by Huisgen 1,3-dipolar cycloaddition reaction(‘‘click' reaction).The alkyne functional groups on poly(4-ethynyl-p-xylylene-co-p-xylylene) thin films were found to be stable under ambient storage conditions and thermally stable up to 100 8C when annealed at 0.08 Torr in argon.We also optimized the click reaction conditions of azide-functionalized molecules with poly(4-ethynyl-p-xylylene-co-p-xylylene).The best reaction result was achieved,when copper concentration was 0.5 mmol/L,sodium ascorbate concentration to copper concentration was 5:1.In contrast,the azide concentration and temperature had no obvious effect on the surface reaction.