Synthesis and evaluation of new dental monomers with both phosphonic and carboxylic acid functional groups

Novel dental monomers containing both phosphonic and carboxylic acid functional groups were prepared. The monomers were based on t‐butyl α‐bromomethacrylate (t‐BuBMA) and synthesized in three steps: The reaction of o‐hydroxyaryl phosphonates [diethyl (2‐hydroxyphenyl) phosphonate, tetraethyl (2,5‐dihydroxy‐1,4‐phenylene) diphosphonate and tetraethyl 5,5′‐(propane‐2,2‐diyl)bis(2‐hydroxy‐5,1‐ phenylene) diphosphonate] with t‐BuBMA, the hydrolysis of phosphonate groups to phosphonic acid using trimethyl silylbromide, and the hydrolysis of the t‐butyl groups to carboxylic acid with trifluoroacetic acid. The monomers were solids and soluble in water and ethanol. The structures of the monomers were determined by Fourier transform infrared (FTIR), ¹H, ¹³C, and ³¹P nuclear magnetic resonance (NMR) spectroscopy. The copolymerization behaviors of the synthesized monomers with glycerol dimethacrylate were first investigated in bulk using photodifferential scanning calorimetry at 40 °C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as photoinitiator. Then, the solution copolymerization of the monomers with acrylamide in ethanol and water was studied, indicating that the synthesized monomers are incorporated into the copolymers. The acidic nature of the aqueous solutions of these monomers (pH values 1.72–1.87) is expected to give them etching properties important for dental applications. The interaction of the monomers with hydroxyapatite was investigated using ¹³C NMR and FTIR techniques. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1953–1965, 2009     

Synthesis and modeling of new phosphorus‐containing acrylates

New methacrylate monomers containing phosphonic acid or both phosphonic and carboxylic acids were synthesized through the reaction of t‐butyl α‐bromomethyl acrylate with triethyl phosphite followed by the selective hydrolysis of the phosphonate or t‐butyl ester groups with trimethylsilyl bromide and trifluoroacetic acid. The copolymerization of these monomers with 2‐hydroxyethylmethacrylate was investigated with photodifferential scanning calorimetry at 40 °C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as a photoinitiator. Quantum mechanical tools were also used to understand the mechanistic behavior of the polymerization reactions of these synthesized monomers. The propagation and chain‐transfer reactions were considered and rationalized. A strong effect of the monomer structure on the rate of polymerization was observed. The polymerization reactivities of the monomers increased with decreasing steric hindrance and/or increasing hydrogen‐bonding capacity because of the hydrolysis of the phosphonate and the t‐butyl ester groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2574–2583, 2005     

Dihydrophilic block copolymers with ionic and nonionic blocks. I. Poly(ethylene oxide)‐b‐polyglycidol with OP(O)(OH)2, COOH,or SO3H functions: Synthesis and influence for CaCO3 crystallization

Dihydrophilic block copolymers of poly(ethylene oxide)‐b‐polyglycidol were prepared and polyglycidol blocks converted into ionic blocks containing  OP(O)(OH)₂,  COOH, or  SO₃H groups. Although phosphorylation of polyhydroxy compounds with POCl₃ usually leads to insoluble products, phosphorylation of poly(ethylene oxide)‐b‐polyglycidol using a POCl₃/ OH ratio equal to 1/1 gave soluble products, predominantly monoester of phosphoric acid (after hydrolysis) (provided that the reaction was conducted in triethyl phosphate as solvent). All copolymers were characterized by ¹H NMR, ¹³C NMR, and/or ³¹P NMR spectra for confirming their structure. The degree of substitution was determined from quantitative ¹³C NMR spectroscopy (inverted‐gate decoupling‐acquisition mode). Preliminary results indicate that from these three groups of block copolymers the phosphoric acid esters are the most effective ones at least in controlling the growth of CaCO₃ crystals in aqueous solution. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 955–963, 2001     

Pd(II)‐catalyzed polymerization of optically active norbornene carboxylic acid esters

(?)‐(1S,2R)‐Norbornene‐2‐carboxylic acid alkyl esters (alkyl = Me, Bz, L ‐menthyl, or D ‐menthyl) were successfully prepared by the Diels–Alder reaction of cyclopentadiene with (R)‐(?)‐pantolactone‐O‐yl acrylate followed by epimerization and column chromatography. The enantiomeric excess was 99.9%. These monomers were polymerized by Pd(II)‐based catalysts, and high yields of the polymers were obtained. The methyl ester gave an optically active polymer of high optical rotation (monomer [α]_D = ?24.7, polymer [α]_D = ?98.5). This high rotation value of the polymer was attributed to the isotactic chain regulation of the polymer. This high rotation was not observed with methyl esters prepared by the transesterification of menthyl esters. The stereoregular polymer exhibited notable resonance peaks at 39 ppm in ¹³C NMR spectra. No crystallinity was observed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1263–1270, 2006     

Synthesis and characterization of phosphonate‐containing polysiloxanes

Phosphonate‐functionalized polysiloxanes have been prepared with a new siloxane/phosphonate monomer. The reaction of 3‐chloropropylmethyldimethoxysilane with trimethylphosphite or triethylphosphite produces several new monomers containing pendant phosphonate groups. Copolymerization with dimethyldimethoxysilane has produced polymers soluble in most organic solvents. The acid hydrolysis of the phosphoryl esters has produced hydrophilic siloxane polymers containing phosphonic acid groups. The thermal properties of the polymers and several related small molecules have been compared with thermogravimetric analysis. Both the monomers and the resulting polymers have been characterized with ¹H, ¹³C, ³¹P, and ²⁹Si NMR. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 48–59, 2003     

Synthesis and properties of amphoteric copolymer of 5‐vinyltetrazole and vinylbenzyl phosphonic acid

Amphoteric polymers have been studied for various applications such as separation of low molecular weight organic molecules from inorganic salt mixtures, selective ion transport, drug delivery through membranes of biological interest, separation of ionic drugs and proteins, and separation of alcohol and water. Typical amphoteric polymers consist of weak base and weak acid groups. In present study, the copolymerization of 5‐vinyltetrazole (VT) and diisopropyl‐p‐vinylbenzyl phosphate (DIPVBP) via free radical polymerization is studied. The reactivity ratio of VT and DIPVBP, which is calculated from Kelen‐Tudos plot, is 0.251 and 0.345, respectively. The amphoteric copolymer of VT and diisopropyl‐p‐vinylbenzyl phosphonic acid (poly(VT‐co‐VBPA)) is obtained from hydrolysis of the copolymer of VT and DIPVBP (poly(VT‐co‐DIPVBP)). Poly(VT‐co‐VBPA) is thermally stable under 190 °C. The anhydrous proton conductivity of amphoteric poly(VT‐co‐VBPA) can reach 1.54 × 10^‐4 S cm^?1 at 170 °C with an activation energy of 114.7 kJ mol^?1. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3486–3493     

Simple synthesis of mixed cellulose acylate phosphonates applying n-propyl phosphonic acid anhydride

Cellulose mixed esters containing alkylphosphonate and carboxylate groups were prepared homogeneously by a new one-pot method using n-propyl phosphonic acid anhydride (T3P^?) in LiCl/N-methyl-2-pyrrolidone (NMP). n-Propyl phosphonic acid anhydride acts as both an activating agent for carboxylic acids and phosphonation reagent. Cellulose mixed esters with DS_acyl ranging from 1.4 to 1.8, and DS_phos up to 0.7 could be prepared. The structure of the cellulose mixed esters was elucidated by FTIR- and NMR spectroscopy, as well as by GPC and solubility tests.     

Synthesis of networked polymers with lithium counter cations from a difunctional epoxide containing poly(ethylene glycol) and an epoxide monomer carrying a lithium sulfonate salt moiety

Poly(ethylene glycol)‐based networked polymers that had lithium sulfonate salt structures on the network were prepared by heating a mixture of poly(ethylene glycol) diglycidyl ether (PEGGE), poly(ethylene glycol) bis(3‐aminopropyl) terminated (PEGBA), and an ionic epoxy monomer, lithium 3‐glycidyloxypropanesulfonate (LiGPS). Flexible self‐standing networked polymer films showed high thermal stability, low crystallinity, low glass transition temperature, and good mechanical strength. The materials were ion conductive at room temperature even under a dry condition, although the ionic conductivity was rather low (10^?6 to 10^?5 S/m). The ionic conductivity increased with the increase in temperature to above 1 × 10^?4 S/m at 90 °C. The film samples became swollen by immersing in propylene carbonate (PC) or PC solution of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). The samples swollen in PC showed higher ionic conductivity (ca.1 × 10^?3 S/m at room temperature), and the samples swollen in LiTFSI/PC showed much higher ionic conductivity (nearly 1 S/m at room temperature). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3113–3118, 2010     

Sequential conversion of orthogonally functionalized diblock copolymers based on pentafluorophenyl esters

Statistic and block copolymers exhibiting activated ester side groups were synthesized by reversible addition‐fragmentation chain transfer polymerization in the presence of cumyl dithiobenzoate, benzyl dithiobenzoate, and 4‐cyano‐4‐((thiobenzoyl)sulfanyl)pentanoic acid as chain transfer agents. Pentafluorophenyl methacrylate and pentafluorophenyl 4‐vinylbenzoate were used to enable a sequential functionalization of the obtained copolymers by conversion of the activated esters with different amines. ¹H NMR spectroscopy, ¹⁹F NMR spectroscopy, and FTIR spectroscopy showed the successful step‐by‐step conversion of the different activated esters by aniline followed by aliphatic amines, thereby realizing a sequential functionalization of block copolymers with just one specific reactive group. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3683–3692, 2010     

Synthesis and polymerization of phosphorus‐containing acrylates

Novel phosphorus‐containing acrylate monomers were synthesized by two different routes. The first involved the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with diethylphosphonoacetic acid. The monomers were bulk‐ and solution‐polymerized at 56–64 °C with 2,2′‐azobisisobutyronitrile. The ethyl ester monomer showed a high crosslinking tendency under these conditions. The selective hydrolysis of the ethyl ester phosphonic ester compound was carried out with trimethylsilyl bromide, producing a phosphonic acid monomer. In the second route, ethyl α‐hydroxymethyl acrylate and t‐butyl α‐hydroxymethyl acrylate were reacted with diethylchlorophosphate. The bulk homopolymerization and copolymerization of these monomers with methyl methacrylate and 2,2′‐azobisisobutyronitrile gave soluble polymers. The attempted hydrolysis of the monomers was unsuccessful because of the loss of the diethylphosphate group. The relative reactivities of the monomers in the photopolymerizations were also compared. The ethyl α‐hydroxymethyl acrylate/diethylphosphonic acid monomer showed higher reactivity than the other monomers, which may explain the crosslinking during the polymerization of this monomer. The reactivities of other derivatives were similar, but the rates of polymerization were slow in comparison with those of methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3221–3231, 2002     

A new design of cleavable acetal‐containing amphiphilic block copolymers triggered by light

We report a new design of photolabile acetal‐containing amphiphilic block copolymers. Acetals as protecting groups for carbonyls or diols can be hydrolyzed under acidic condition but very stable with respect to hydrolysis at pH > 7. When combining light‐capturing chromophores with acetals, the hydrolysis of acetals can be activated by light to design dual responsive acetal‐containing polymers. Using acetalization reaction of 2,3‐dihydroxypropyl methacrylate with benzaldehyde derivatives, two new acetal‐containing photolyzable monomers have been designed. Comparable to commonly used photolabile monomers containing nitrobenzyl esters, the two acetal‐containing monomers are easy to polymerize using atom transfer radical polymerization with excellent molecular weight and dispersity control. We studied the cleavage kinetics and mechanism of acetal groups in both monomers and polyethylene oxide (PEO)‐containing amphiphilic block copolymers using ¹H NMR and UV–vis spectroscopy. o‐Nitrobenzaldehyde acetal showed a Norrish Type II rearrangement to form benzoic ester; while, 2,5‐dimethoxy benzaldehyde acetal was photolabile to completely release 2,3‐dihydroxypropyl methacrylate. The photocleavage of acetals is a zero‐order reaction in regardless of molecular states of acetals; while, the acid‐cleavage of acetals proves to be a first‐order kinetics and the cleavage becomes much slower for polymers. The self‐assembly of acetal‐containing amphiphilic block copolymers and the acid‐/light‐controlled dissociation of their vesicles have been investigated. We demonstrate that those acetal‐containing polymers are potentially useful as smart drug delivery systems where the release kinetics of payloads is tunable using light and pH as triggers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1815–1824     

Phosphonic-Acid Analogues of the N-Acetyl-2-deoxyneiiraniinic Acids: Synthesis and Inhibition of Vibrio cholerae Sialidase

The phosphonic acids 3 and 4 were prepared to compare their inhibitory activity on Vibrio cholerae sialidase with the one of the corresponding N-acetyl-2-deoxyneuraminic acids 5 and 6 . Thus, hydrogenation and benzylation of methyl N-acetyl-2,3-didehydro-2-deoxyneuraminate (1MeNeu2en5Ac; 7) gave a mixture of the fully O-benzylated benzyl and methyl esters 9 and 10 , the partially O-benzylated benzyl and methyl esters 11 and 12 , and the fully O-and N-benzylated benzyl and methyl esters 13 and 14 (Scheme 1). Transesterification of 9 to 10 and hydrolysis of 10 gave the acid 15 . Oxidative decarboxylation of 15 with Pb(OAc)₄ gave a 1:9 mixture of the α-and β-D-glycero-D-galacto-acetates 16 and 17 . Phosphonoylation of 17 with P(OMe)₃ and Me₃SiOTf gave a 1.3:1 mixture of the phosphonates 18 and 19 , which were deprotected to give the (4-acetamido-2,4-dideoxy-D-glycero-α-and β-D-galacto-octopyranosyl)phosphonic acids 3 and 4 , respectively. The acid 6 was obtained by epimerization of the tert-butyl ester 23 with lithium N-cyclohexylisoproylamide and deprotection. The phosphonic acids 3 (K_i 5.5 10_-5 M) and 4 (K_i 2.3.10^?4 M ) are stronger inhibitors of Vibrio cholerae sialidase than the anomeric N-acetyl-2-deoxyneuraminic acids 5 (K_i 2.3 10^?3 M ) and 6 . Both 3 and 4 inhibit the Vibrio cholerae sialidase, while only the carboxylic acid 5 , possessing an equatorial COOH group is an inhibitor.     

Synthesis strategies to incorporate acrylic acid into N‐vinylcaprolactam‐based microgels

Two different synthesis strategies were used to synthesize N‐vinylcaprolactam (VCL)‐acrylic acid (AA)‐based temperature‐ and pH‐sensitive microgels under the adequate conditions to avoid possible hydrolysis of VCL due to the presence of carboxylic groups provided by AA. Polymeric and colloidal features of the microgels were analyzed: the partial conversion evolutions of each comonomer were determined by ¹H NMR and the swelling/deswelling behavior by means of Photon Correlation Spectroscopy. Considering that microgels are porous soft nanoparticles, conductimetric titrations at the swollen state were carried out to calculate the volumetric charge density. The results indicate that the addition of AA after 30 minutes of reaction time helped to incorporate higher amounts of AA into microgels and as a result, to obtain both temperature‐ and pH‐sensitive nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Monomers for adhesive polymers. XV. Synthesis,photopolymerization, and adhesive properties of polymerizable β‐ketophosphonic acids

The novel polymerizable β‐ketophosphonic acids 4 , 8 , 10 , and 16 as well as the 9‐(methacryloyloxy)‐nonylphosphonic acid 20 were synthesized in four to eight steps. They were characterized by ¹H NMR, ¹³C NMR, and ³¹P NMR spectroscopy and by high‐resolution mass spectra. The free‐radical polymerization of 4 , 8 , 10 , and 16 was carried out in a water/ethanol solution, using 2,2′‐azo(2‐methylpropionamidine)dihydrochloride as initiator. To evaluate the reactivity of the acidic monomers 4 , 8 , 10 , 16 , and 20 , their photopolymerization behavior was investigated by photodifferential scanning calorimeter. Copolymerizations with 2‐hydroxyethyl methacrylate, glycol dimethacrylate, and N,N′‐diethyl‐1,3‐bis‐(acrylamido)propane were studied. The homopolymerization of the corresponding β‐ketophosphonates and their copolymerization with hydroxyethyl methacrylate were also carried out. Self‐etch adhesives based on the β‐ketophosphonic acids 4 , 8 , 10 , and 16 were able to provide high shear bond strengths (SBSs) of dimethacrylate‐based composite to dentin and enamel. The β‐ketophosphonic acid 8 was also shown to exhibit significantly better adhesive properties than the corresponding phosphonic acid 20 . Indeed, the presence of the carbonyl moiety in the β‐position of the phosphonic acid group led to a strong improvement of the composite SBS to dentin and enamel. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3550–3563     

Kinetics and Mechanism for Hydrolysis of α-Amino Acid Esters in Mixed Ligand Complexes with Zn(II)–Nitrilo-tris(methyl phosphonic Acid)

The kinetics of base hydrolysis of the alanine ethyl ester, in addition to glycine, histidine and methionine methyl esters in the presence of the Zn-NTP complex, were studied in aqueous solution by the pH-potentiometric technique, where NTP denotes the nitrilo-tris(methyl phosphonic acid) ligand. The kinetic data fits assumed that hydrolysis proceeds through formation of a M–OH complex, followed by an intramolecular OH⁻ attack. The effect of an organic solvent on the hydrolysis of coordinated esters was investigated by measuring the rate of hydrolysis in dioxane–water solutions of different compositions at t=25.0 °C and I=0.1 mol⋅dm⁻³. The kinetics of base hydrolysis of the glycine methyl ester was studied at different temperatures. Activation parameters for the base hydrolysis of the complexes were evaluated.     

Synthesis and self‐assembly of diblock copolymers bearing 2‐nitrobenzyl photocleavable side groups

The light‐responsive behavior in solution and in thin films of block copolymers bearing 2‐nitrobenzyl photocleavable esters as side groups is discussed in this article. The polymers were synthesized by grafting 2‐nitrobenzyl moieties onto poly(acrylic acid)‐block‐polystyrene (PAA‐b‐PS) precursor polymers, leading to poly(2‐nitrobenzyl acrylate‐random‐acrylic acid)‐block‐polystyrene (P(NBA‐r‐AA)‐b‐PS) block copolymers. The UV irradiation of the block copolymers in a selective solvent for PS led to the formation of micelles that were used to trap hydrophilic molecules inside their core (light‐induced encapsulation). In addition, thin films consisting of light‐responsive P(NBA‐r‐AA) cylinders surrounded by a PS matrix were achieved by the self‐assembly of P(NBA‐r‐AA)‐b‐PS copolymers onto silicon substrates. Exposing these films to UV irradiation generates nanostructured materials containing carboxylic acids inside the cylindrical nanodomains. The availability of these chemical functions was demonstrated by reacting them with a functional fluorescent dye. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Near-monodisperse,n-alkyl,end-functionalized poly(methyl vinyl ether)s: Synthesis by living cationic polymerization and solution characterization

Water-soluble amphiphilic diblock copolymers were synthesized by the living cationic polymerization of methyl vinyl ether (hydrophilic block) and its subsequent termination with n-alcohols of chain lengths varying from one to eight, and three n-alkyl carboxylic acids with 10, 12, and 18 carbon atoms. Additionally, water and ethylene glycol were tested as terminating agents. The extent of the functionalization was determined using ¹H NMR spectroscopy. The cloud points of 1% w/w aqueous solutions of the polymers as determined by turbidimetry decreased from 32 to 21°C as the number of carbon atoms of the terminating agent increased. Aqueous GPC revealed micellization of the stearic acid-terminated block copolymer, while the other block copolymers existed mainly as unimers. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2547–2554, 1998     

Synthesis and proton conductivities of phosphonic acid containing poly‐(arylene ether)s

A novel phosphonic acid containing bisphenol was successfully synthesized from phenolphthalein and m‐aminophenylphosphonic acid. A series of homo‐ and copoly‐(arylene ether)s containing phosphonic acid groups were prepared by solution nucleophilic polycondensation. These phosphonic acid containing polymers can readily be dissolved in common organic solvents, such as dimethyl sulfoxide, N‐methyl‐2‐pyrrolidinone, and N‐cyclohexylpyrrolidinone, and can be cast into tough and smooth films. The presence of phosphonic acid pendants in the poly‐(arylene ether)s was confirmed by NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and conductivity measurements. This is the first report on the attachment of phenylphosphonic acid groups as side chains to aromatic polyethers. These poly‐(arylene ether)s had very high glass‐transition temperatures ranging from 254 to >315 °C and high molecular weights. The conductivities of the synthesized polymers were analyzed by the Cole–Cole method, and they ranged from 10^?5 to 10^?6 Scm^?1. The synthesized polymers also exhibited good solution processability. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3218–3226, 2001     

Synthesis and characterization of rigid functional anionic polyelectrolytes: Block copolymers and star homopolymers

Seven cyclolinear polymers bearing the tertiary‐butyl α‐(hydroxymethyl)acrylate (TBHMA) ether dimer were prepared using reversible addition–fragmentation chain transfer (RAFT) polymerization. Of the seven polymers, five were cyclolinear homopolymers of the TBHMA ether dimer with different degrees of polymerization, one was an “arm‐first” star homopolymer, and the other was an amphiphilic linear copolymer based on the positively ionizable hydrophilic 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and the TBHMA ether dimer. For comparison, two more polymers were prepared using RAFT polymerization where the TBHMA ether dimer was replaced by tertiary‐butyl methacrylate (tBuMA). In particular, an amphiphilic linear DMAEMA–tBuMA diblock copolymer and a tBuMA arm‐first star homopolymer were also synthesized. All polymers were characterized in terms of their molecular weights and composition using gel permeation chromatography and ¹H NMR spectroscopy, respectively. Subsequently, the tertiary‐butyl groups of the TBHMA ether dimer units and those of the tBuMA units were cleaved by hydrolysis to yield carboxylic acid groups. The successful removal of the tertiary‐butyl groups was confirmed using ¹H and ¹³C NMR and attenuated total reflectance‐Fourier transform infrared spectroscopies. The hydrolyzed (co)polymers exhibited pK values of the carboxylic acid groups of around 4.5, and glass transition temperatures, T_g, of around 200 °C, which were 50 °C higher than those of their nonhydrolyzed precursors. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation and characterization of novel basic polysulfone polymers

Two synthesis routes for the preparation of novel base‐modified polysulfones (PSUs; Udel®) were investigated: (1) the addition of the basic aromatic ketones 2,2′‐dipyridylketone and 4,4′‐bis‐(diethylamino)benzophenone and the basic aromatic aldehydes N,N‐dimethylamino‐benzaldehyde, pyridine‐2‐aldehyde, pyridine‐3‐aldehyde, and pyridine‐4‐aldehyde to lithiated PSU and (2) the reaction of lithiated PSU with basic aromatic carboxylic acid esters such as 4‐N,N‐dimethylaminobenzoic acid ethylester, pyridine‐2‐carboxylic acid ethylester, pyridine‐3‐carboxylic acid ethylester, and pyridine‐4‐carboxylic acid ethylester. Both synthesis routes lead to a high degree of conversion, without the occurrence of crosslinking. This is remarkable, especially for the reaction of lithiated PSU with the ester compounds, because the ? (C?O)? Ar groups formed by the reaction of the ester with PSU–Li are not further converted with the remaining PSU–Li sites to (crosslinked) PSU? C(? OLi)? Ar? PSU alcoholates, as normally observed when esters are reacted with Li‐organic compounds. Starting with dilithiated PSU, we obtained degrees of substitution of 0.8–2 groups per PSU repeating unit. The structures and compositions of the modified PSU polymers were confirmed with NMR spectroscopy and elemental analysis. The modified polymers were also characterized via thermogravimetric analysis (thermal stability). Interestingly, the product of the reaction of lithiated PSU with 4,4′‐bis‐(diethylamino)benzophenone could be oxidized to a deep blue polymeric dye that showed proton self‐conductivity. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2874–2888, 2001