Uniform plasmonic near-field nanopatterning by backward irradiation of femtosecond laser

We present localized optical field distribution properties in the vicinity of gold particles on a silicon substrate by backward and forward irradiation. It is technically difficult to fabricate nanostructures on the surface by a conventional forward laser incident to the substrate because gold nanoparticles easily aggregate to form double-layered particle arrays. We calculated enhanced optical field properties in order to pattern the substrate surface only with a template of the bottom-layered particle arrays in the case that the backward irradiation of a femtosecond laser is used in the system of aggregated double-layered gold nanoparticle arrays. With the backward irradiation, the optical field intensity in the substrate for the double-layered hexagonal arrays is found to be only 30% lower than the mono-layered system. Moreover, a near field cannot be generated with the forward irradiation. As a result, only the backward irradiation scheme is found to be effective for uniform surface nanopatterning at enhanced plasmonic near-field zones.     

Fabrication of gold nano-particle arrays using two-dimensional templates from holographic lithography

We report a simple and cost effective method to fabricate regular metallic particle arrays over large areas with good regularity by using holographic lithography interference for the study of localized surface plasmon. Samples of disk-shaped gold nano-particles arranged in square arrays with lattice spacing ranging from 300 nm to 600 nm were successfully fabricated on glass substrates first by sputtering a thin gold layer onto two-dimensional photoresist templates of hole arrays in square lattice obtained by the holographic method and then removing the photoresist by a lift-off procedure. The plasmonic resonance of the gold nano-particle arrays due to the change of morphology by thermal annealing was studied. The disk-shaped gold nano-particles were found to become more round shaped upon heating and blue shift of the extinction plasmonic band was observed. The results were explained with model calculations using spheroidal particles.     

Correlation between structure and optoelectronic properties in a two‐dimensional nanoparticle assembly

The optical properties of two‐dimensional assemblies of metal nanoparticles are strongly influenced by the morphological configuration of the metal particles in the layer. Therefore, we correlate the structural and optical properties of two‐dimensional, hexagonal gold nanoparticle arrays. We characterize the structure of the arrays using grazing‐incidence small angle X‐ray scattering (GISAXS). From the GISAXS pattern, we determine the size of the gold particles as well as the lattice spacing of the hexagonal assembly. Based upon these parameters we calculate the dielectric function of the gold particle array using the Maxwell–Garnett effective medium theory. We further deduce the absorption spectrum which closely follows the measured absorption and photoconductance spectrum. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ion beam induced chemical vapor deposition (IBICVD) of cobalt particles

A novel method aiming at fabricating submicron-scale particles utilizing dicobalt octacarbonyl as a precursor for cobalt, formed upon localized ion beam induced decomposition, is presented. Patterns of deposited particles are fabricated through vector scan rastering. Measurements of cumulative magnetic properties (arrays of 2 μm–size dots) show coercivity of about 100 Oe and the saturation magnetization of approximately 1000 emu/cm³.     

Formation of ordered arrays of gold particles by nanoindentation templating

Ordered arrays of gold‐rich particles, with diameters ranging from 50 nm to 180 nm, have been formed on a silicon (100) surface through pre‐patterning by nanoindentation. Indentation and gold deposition of the sample is followed by thermal processing, causing the gold to become trapped at the indentation sites. We suggest that gold trapping is via an alloying process with the underlying Si substrate where the native oxide is structurally compromised by the indentation process. The final size for a given particle is directly dependent on the size of the indentation site. It has also been demonstrated that excess gold found on the surface outside of these indentation sites can be readily removed via simple mechanical abrasion without affecting the particles within the indent. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Gold aggregates on silica templates and decorated silica arrays for SERS applications

In this work, we report the fabrication and characterization of size controllable gold nanoparticles (NPs) aggregates for their application in surface enhanced Raman scattering (SERS). Aggregates were prepared using two methodologies: (i) by using silica particles arrays as a template to agglomerate gold NPs between the inter-particle interstices, and (ii) by functionalizing silica particles to be used as support to graft gold nanoparticles and thus to form decorated silica particle arrays. These substrates were used in the detection of Rhodamine 6G producing an enhancement factor (EF) from 10⁴ to 10⁶ that is associated to the increment of hot spot (HS) sites, and the fact that plasmon resonance from aggregates and absorption wavelength of test molecules are closely in resonance with excitation wavelength. The EF was also reduced when the plasmon resonance was red-shifted as a result of the increment of aggregate size. In spite of this, the EF is high enough to make these SERS substrates excellent candidates for sensing applications.     

Self-Assembly of Gold Nanoparticles on Nanometre-Patterned Surface

The self-assembly processes of gold nanoparticles on nanometre-step-patterned Si surface and polished Si surface are investigated by the convective self-assembly method. The convective self-assembly method is used to deposit the colloids dispersed in benzene onto the substrates. The SEM results show that the configurations of the gold arrays depend on the surface morphology of the substrates. On the nanometre-step-patterned Si surface, the nanoparticles self assemble into parallel lines, and the distance between the neighbouring lines is around 35 nm. On the polished Si surface the nanoparticles form compact domains. In each domain the particles are closepacked in a two-dimensional hexagonal superlattice and are separated by uniform distances. The analysis shows that on the nanometre-step-patterned Si surface, the steps play critical roles in the self-assembly process of gold nanoparticles. The capillary force from the steps drives the particles to lines along the steps. Therefore, the particles tend to self-assemble into one-dimensional line structures when the solvent evaporates. For the polished Si substrate there is a little difference that the particles form two-dimensional hexagonal superlattices without the directional confinement.     

Self assembly of inorganic nanocrystals in 3D supra crystals: Intrinsic properties

Here we describe how arrangements of nanocrystals can self-organize in 3D arrays called supra crystals. The 3D arrays can fall into the familiar categories of face centered cubic (fcc), hexagonal compact packing (hcp) crystals, and body centered (bcc) crystals. Intrinsic collective properties of these 3D arrangements are different from the properties of individual nanoparticles and from particles in bulk.We demonstrate by two various processes and with two types of nanocrystals (silver and cobalt) that when nanocrystals are self ordered in 3D superlattices, they exhibit a coherent breathing mode vibration of the supra crystal, analogous to a breathing mode vibration of atoms in a nanocrystal.Comparison between the approaches to saturation of the magnetic curve for supra crystals and disordered aggregates produced from the same batch of nanocrystals is similar to that observed with films or nanoparticles either highly crystallized or amorphous.     

Coercivity reduction in a two-dimensional array of nano-particles

We report on theoretical investigation of the magnetization reversal in two-dimensional arrays of ferromagnetic nano-particles with parameters of cobalt. The system was optimized for achieving the lowest coercivity in an array of particles located in the nodes of triangular, hexagonal and square grids. Based on the numerical solution of the non-stochastic Landau-Lifshitz-Gilbert equation we show that each particle distribution type is characterized with a proper optimal distance, allowing to lower the coercivity values for approximately 30% compared with the reference value obtained for a single nano-particle. It was shown that the reduction of coercivity occurs even if the particle position in the array is not very precise. In particular, the triangular particle arrangement maintained the same optimal distance between the particles under up to 20% random displacements of their position within the array.     

Collective resonances in gold nanoparticle arrays

We present experimental evidence of sharp spectral features in the optical response of 2D arrays of gold nanorods. A simple coupled dipole model is used to describe the main features of the observed spectral line shape. The resonance involves an interplay between the excitation of plasmons localized on the particles and diffraction resulting from the scattering by the periodic arrangement of these particles. We investigate this interplay by varying the particle size, aspect ratio, and interparticle spacing, and observe the effect on the position, width, and intensity of the sharp spectral feature.     

Elaboration of self-organized magnetic nanoparticles by selective cobalt silicidation

Self-organized magnetic nanoparticles are obtained through selective silicidation of cobalt using a silicon substrate pre-structured with tri-dimensional gold islands as template. On the step bunches array of a vicinal Si(1 1 1) surface, gold deposition results in the formation of nanodroplets aligned along the step bunches. A subsequent cobalt deposition is performed onto this gold islands-covered Si surface, with two silicidation processes investigated: reactive deposition (RD) and solid phase reaction (SPR). The cobalt is converted into a non-magnetic silicide film except where the surface is locally masked by the gold islands, giving rise to cobalt nanomagnets which can be capped by a gold layer. A scanning tunneling microscopy comparative study of RD and SPR processes demonstrates that the former induces strong surface morphology changes while the latter preserves the pristine islands. Magnetic measurements performed with alternating gradient force magnetometry at room temperature are used to demonstrate the presence of ferromagnetic cobalt nanoparticles on SPR-processed samples. These nanomagnets show a clear in-plane anisotropy behavior.     

Experimental magnetic study and evidence of the exchange bias effect in unidimensional Co arrays produced by interference lithography

A simple process for fabricating submicrometric magnetic arrays employing interference lithography, sputtering deposition and lift-off processes is proposed and demonstrated. The magnetic properties of cobalt (Co) arrays were measured and compared with those of a continuous Co magnetic film. The results show a dependence of the hysteresis curve on the orientation of the field as regards the array, which is correlated with the anisotropy of the structures and a dependence of the coercive field on the periodicity of the arrays. Moreover, an exchange bias effect was observed, which is ascribed to a ferromagnetic/antiferromagnetic (FM/AFM) coupling between Co and a thin surface cobalt oxide (CoO) layer.     

Production of cobalt and nickel particles by hydrogen reduction

Cobalt and nickel nanoparticles were produced by hydrogen reduction reaction from cobalt or nickel chloride precursor vapour in nitrogen carrier gas. This aerosol phase method to produce nanoparticles is a scalable one-step process. Two different setups were introduced in particle production: a batch type reactor and a continuously operated reactor. Common feature in these setups was hydrogen mixing in a vertical flow reactor. The process was monitored on-line for particle mass concentration and for gas phase chemical reactions. Tapered element oscillating microbalance measured the particle mass concentration and Fourier transform infrared spectroscopy was used to monitor relevant gas phase species. The produced cobalt and nickel particles were characterised using transmission electron microscopy and x-ray diffraction. The produced cobalt and nickel particles were crystalline with cubic fcc structure. Twinning was often observed in cobalt particles while nickel particles were mostly single crystals. The cobalt particles formed typically long agglomerates. No significant neck growth between the primary particles was observed. The primary particle size for cobalt and nickel was below 100 nm.     

Pulsed-laser deposition and characterization of ZnO nanowires with regular lateral arrangement

We report on the high-pressure pulsed-laser deposition growth of periodic arrays of free-standing single zinc oxide nanowires with uniform hexagonal arrangement and cross-section with thickness of less than 100 nm. In order to achieve the wire alignment, we prepared an ordered array of catalytic gold seed particles by a nanosphere lithography mask transfer technique using monodisperse spherical polystyrol nanoparticles. These templates were investigated by scanning electron microscopy and atomic force microscopy prior to nanowire growth. X-ray diffraction revealed the epitaxial relationships between the nanostructures and the a-plane sapphire substrate and excellent crystal quality. The optical properties of the ZnO nanowire arrays were measured by cathodoluminescence. PACS 61.82.Rx; 81.05.-t; 81.05.Dz; 81.10.-h     

Tunable optical transmission through gold hole arrays with converging and diverging shaped channels

We investigate the extraordinary light transmission through gold hole arrays with converging–diverging, diverging–converging, and converging shaped channels by using finite-difference time-domain (FDTD) method. We find that the resonance wavelength and intensity of each type of hole array are sensitive to the aperture size and unit number of the converging or diverging shape unit in the channels. We show that transmission behaviors are noticeably different for the gold hole arrays with such three different types of channel shapes. The resonant characteristics of the gold hole arrays with shaped channels have a number of important device applications, including filters, modulators and sensors.     

Investigation of the surface properties of gold nanowire arrays

Gold nanowire arrays with diameters ranging from 45 to 200 nm were obtained via electrochemical deposition within the ion-track templates. The morphology of gold nanowires was imaged by scanning electron microscopy (SEM). The surface properties were investigated by surface plasmon resonance (SPR) and X-ray photoelectron spectroscopy (XPS). The SPR peaks were observed as the gold nanowire arrays embedded in the templates and their intensity decreased after the sample exposed to the air for a certain time due to the formation of chemisorbed oxygen on nanowire surface. The positive binding energy shifts in Au core level was found when the gold nanowire arrays embodied in template and the initial- and finial-state effects were introduced to explain this phenomenon.     

金催化的硅纳米线的可控制备及光学特性研究

硅纳米线是新型一维半导体纳米材料的典型代表。利用阳极氧化铝薄膜为模版复制出具有有序纳米结构的金膜,在金的催化辅助下对单晶硅进行湿法刻蚀,得到尺寸、形状、分布可控的硅纳米线阵列,并对其光学特性进行了研究。研究结果表明,金代替银作为催化剂,可以有效地抑制二次刻蚀,金的化学性质相对于银更加稳定,克服了银膜在较高的温度或较长刻蚀时间下产生的结构性破坏,得到形貌规整、尺寸可控的硅纳米线阵列。对该阵列在400 nm~1 200 nm波段的反射率、透过率进行了测试,并对比分析了金模板催化与传统方法机理的异同。测试结果表明,相较于传统金属辅助化学刻蚀法,文中提出的金模板催化法制备的硅纳米线阵列尺寸及分布更加均匀可控,在宽光谱范围内的抗反射性得到了显著提高。     

Large hexagonal arrays of aligned ZnO nanorods

Large-scale truly periodic arrays of vertically aligned zinc oxide nanorods were grown on pre-patterned and pre-annealed gold dots on a-plane sapphire substrates via the vapor–liquid–solid mechanism. Periodic arrays of triangular gold islands were first patterned on the a-plane sapphire substrates by the nanosphere self-assembly technique. Zinc has been found to be an effective interfacial modifier between gold and sapphire to form single catalytic dots from triangular islands. The successful fabrication of zinc oxide nanowires in truly periodic arrays opens up the possibility of achieving enhanced room-temperature ultraviolet lasing and photonic crystal based devices and sensors. PACS 81.07.Bc; 81.10.-h; 81.16.Nd     

Contact improvement of carbon nanotubes via electroless nickel deposition

Individual multi-walled carbon nanotubes (CNTs) were deposited onto microelectrodes and embedded in nickel to achieve low-ohmic contact resistances. Electroless deposition of nickel onto gold/iron, palladium, and cobalt microelectrodes was used to form electrically stable bonds at the interfaces between the electrodes and CNTs. Resistance measurements showed that the contact resistances of the CNTs on gold/iron and palladium were significantly improved by nickel embedding, whereas no further improvement was found for the CNTs on cobalt. Electroless metal deposition is a parallel process providing stable electrical and mechanical contacts between CNTs and metallic microelectrodes. PACS 81.07.De     

Properties of ferromagnetic micropowders

Very small particles of iron, cobalt, and iron-cobalt alloys have been prepared by an evaporation-condensation technique. The crystal structure and shape of these particles have been investigated by X-ray diffraction and electron microscopy.The iron and alloy particles were all found to be bcc and the cobalt particles fcc. No hcp cobalt was observed. The shape of all particles was predominantly spherical. The electron microscope showed that the particles possessed a distribution of sizes and were linked together to form chains.Magnetic measurements have been carried out at 290 K on assemblies of these particles. Coercivity, saturation and remanence curves obtained using a Faraday balance magnetometer and pulsed field magnetometer are presented. These show the particles to have fairly high coercivities (typically 1 kOe) but fairly low remanence to saturation ratios (typically 0.25).