Phase behavior of amphiphiles at liquid crystals/water interface: A coarse-grained molecular dynamics study

We present a coarse-grained molecular dynamics simulation study of phase behavior of amphiphilic monolayers at the liquid crystal （LC）/water interface. The results revealed that LCs at interface can influence the lateral ordering of amphiphiles. Particularly, the amphiphile tails along with perpendicularly penetrated LCs between tails undergo a two-dimension phase transition from liquid-expanded into a liquid-condensed phase as their area density at interface reaches 0.93. While, the liquid-condensed phase of the monolayer never appears at oil/water interface with isotropic shape oil particles. These findings reveal the penetration of anisotropic LC can promote ordered lateral organization of amphiphiles. Moreover, we find the phase transition point is shifted to lower surface coverage of amphiphiles when the LCs have larger affinity to the amphiphile tails.     

Orientation,recognition, and photoreaction of nucleolipids in model membranes

Amphiphiles with nucleobases and nucleosides as headgroups have been synthesized. Their surface behavior was investigated in monolayers at the air/water interface. The double chain nucleolipids form stable monolayers with nearly identical surface pressure-area diagrams, whereas the spreading behavior of the mono chain amphiphiles is dominated by the various nucleobase-headgroups. When measuring the interactions between nucleolipid monolayers and nucleobases (monomeric and polymeric ones), specific base-base effects could be observed: the complementary nucleobases solubilized in the subphase expand the monolayer more than the non-complementary ones. Photodimerization reactions of thymine-amphiphiles were investigated in mono- and multilayers as well as in spin-coated films.     

Investigation in monolayers of double-chain fluorocarbon amphiphiles Effect of headgroups on molecular packing and interaction between hydrocarbon and fluorocarbon monolayers

The surface pressure-area diagrams of double-chain fluorocarbon amphiphiles with different headgroup compositions show that the amphiphiles arrange almost perpendicularly to the water subphase and the structure of headgroups exerts significant influence on the amphiphile packing. Strong hydrogen bonding and weak electrostatic interaction favor the formation of stable monolayers. Perfluorooctanoic acid (FOA) cannot form monolayer at water/air interface and can only form liquid monolayer in subphase of calcium nitrate solution. Complete phase separation of palmitic acid and a fluorocarbon amphiphile with shorter hydrocarbon spacer group, 1, could be demonstrated in monolayers by using the phase rule of Crisp. The creation of phase-separated monolayers is possible when the monolayer is composed of a mixture of palmitic acid and a fluorocarbon amphiphile with longer hydrocarbon spacer group, 2. It can be suggested that the miscibility of hydrocarbon amphiphiles with fluorocarbon amphiphiles is determined by the hydrocarbon fraction of fluorocarbon amphiphiles.     

Supramolecular assemblies of a new series of gemini-type schiff base amphiphiles at the air/water interface: in situ coordination, interfacial nanoarchitectures, and spacer effect

Great interest has been devoted to the gemini amphiphiles because of their unique properties. In this article, we report some interesting properties of the interfacial films formed by a series of newly designed gemini amphiphiles containing the Schiff base moiety. This novel series of gemini amphiphiles with their Schiff base headgroups linked by a hydrophobic alkyl spacer (BisSBC18Cn, n = 2, 4, 6, 8, 10) could be spread to form stable monolayers and coordinated with Cu(Ac)(2) in situ in the monolayer. The alkyl spacer in the amphiphiles has a great effect on the regulation of the properties of the Langmuir monolayers. A maximum limiting molecular area was observed for the monolayers of the gemini amphiphile with the spacer length of hexa- or octamethylene groups. Both the monolayers on water and on the aqueous Cu(Ac)(2) subphase were transferred onto solid substrates, and different morphologies were observed for films with different spacers. Nanonail and tapelike morphologies were observed for amphiphile films with shorter spacers (n = 2 and 4) on the water surface. Wormlike morphologies were observed for gemini films with longer spacers of C(8) and C(10) when coordinated with Cu(Ac)(2). An interdigitated layer structure was supposed to form in the multilayer films transferred from water or the aqueous Cu(Ac)(2) subphase.     

Substitution controlled molecular orientation and nanostructure in the Langmuir-Blodgett films of a series of amphiphilic naphthylidene-containing Schiff base derivatives

Three amphiphilic Schiff bases containing naphthylidene group, N-octadecyl-2'-hydroxy-naphthalenylideneamine (HNOA-1), N-(4'-octadecyloxy)-2'-hydroxy-naphthalenylideneaniline (HNOA-2), and N-(4'-N-octadecylbenzamide)-2'-hydroxy-naphthalenylideneaniline (HNOA-3), were designed and their interfacial assemblies were investigated. These amphiphiles have different substitution groups in the Schiff base moiety. It was observed that HNOA-1, being in lack of second aromatic ring, formed multilayer films at the air/water interface, while the other two compounds, with another aromatic ring and some hydrophilic groups, can be spread as monolayers on water surface. All of Schiff bases could coordinate with Cu(Ac)2 in situ in the spreading films. Both the spreading films from water and aqueous Cu(Ac)2 subphases were transferred onto solid substrates and their surface morphologies as well as molecular packing modes were investigated by a series of methods such as atomic force microscopy, Fourier transform infrared spectra and X-ray diffraction. Depending on the different substitutions, these amphiphiles showed different orientations in the Langmuir-Blodgett films. Particularly, during the process of complex formation at the air/water interface, great conformational change of the alkyl chain was observed for HNOA-2 in comparison with that of other compounds. In addition, nanofiber structures were observed for the Cu(II)-complexed HNOA-1 and HNOA-2 films.     

Synthesis and characterization of naphthalene-substituted triphenylene discotic liquid crystals

A series of naphthalene-substituted triphenylene liquid crystals (LCs), viz. triphenylene-2,3,6,7,10,11-hexayl hexakis(6-alkenyloxy-2-naphthoate)s (HTPnN compounds) were synthesized and characterized. Alkenyloxy groups containing three to eleven carbon atoms were used as peripheral spacers in these liquid crystals. The discotic liquid crystals synthesized trap one to three water molecules depending on the length of their peripheral spacers. Differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction measurements confirm both nematic (N_d) and rectangular disordered columnar (Col_rd) phases for most of the synthesized discotic LCs. The clearing temperatures of these discotic LCs increase with increasing peripheral spacer length. A hybrid aligned HTP9N sample was investigated to evaluate its optical performance. Retardation values of this hybrid sample decrease with increasing wavelength and increase with increasing measuring angle.     

Preparation of microscopic and planar oil-water interfaces that are decorated with prescribed densities of insoluble amphiphiles

Langmuir monolayers (monolayers of insoluble molecules formed at the surface of water), and associated Langmuir-Blodgett/Schaefer monolayers prepared by transfer of Langmuir films to the surfaces of solids, are widely used in studies aimed at understanding the physicochemical properties of biological and synthetic molecules at interfaces. In this article, we report a general and facile procedure that permits transfer of Langmuir monolayers from the surface of water onto microscopic and planar interfaces between oil and aqueous phases. In these experiments, a metallic grid supported on a hydrophobic solid is used to form oil films with thicknesses of 20 mum and interfacial areas of 280 mum x 280 mum. Passage of the supported oil films through a Langmuir monolayer is shown to lead to quantitative transfer of insoluble amphiphiles onto the oil-water interfaces. The amphiphile-decorated oil-water interfaces hosted within the metallic grids (i) are approximately planar, (ii) are sufficiently robust mechanically so as to permit further characterization of the interfaces outside of the Langmuir trough, (iii) can be prepared with prescribed and well-defined densities of amphiphiles, and (iv) require only approximately 200 nL of oil to prepare. The utility of this method is illustrated for the case of the liquid crystalline oil 4-pentyl-4'-cyanobiphenyl (5CB). Transfer of monolayers of either dilauroyl- or dipalmitoylphosphatidylcholine (DLPC and DPPC, respectively) to the nematic 5CB-aqueous interface is demonstrated by epifluorescence imaging of fluorescently labeled lipid and polarized light imaging of the orientational order within the thin film of nematic 5CB. Interfaces prepared in this manner are used to reveal key differences between the density-dependent phase properties of DLPC and DPPC monolayers formed at air-water as compared to that of nematic 5CB-aqueous interfaces. The methodology described in this article should be broadly useful in advancing studies of the interfacial behavior of synthetic and biological molecules at liquid-liquid interfaces.     

Synthesis and Langmuir-film formation of new dendritic DTPA-derived gadolinium(III) complexes

A series of dendritic DTPA-derived ligands and their corresponding gadolinium(III) complexes have been prepared and their spreading behaviour at the air-water interface has been investigated. The results show that these amphiphiles have the prerequisite qualities to form stable and reversible Langmuir monolayers opening the road to novel magnetic organic films.     

Self-organization of substituted azacrowns based on their discoid and amphiphilic nature

Cyclame and hexacyclene derivatives, bearing four and six long-chain substituents respectively, were synthesized. They are discussed as monolayer-forming amphiphiles as well as liquid-crystalline-phase-forming thermotropic mesogens. The compounds investigated form ordered monolayers at the gas/water interface. In the monolayer the hydrophilic cyclic head group lies flat on the water surface, whereas the hydrophobic substituents are oriented perpendicularly with respect to the interface. Most derivatives fitted with aromatic substituents exhibit a solid condensed state exclusively. In contrast with this, solid condensed as well as expanded phases can be found when spreading the aliphatic-substituted compounds. In the latter case, the onset of the phase transition takes a bump-like shape, owing to kinetic reasons. A liquid-crystalline columnar order is only achieved with hexacyclenes bearing aromatic substituents, etherified with one alkyl chain. Besides this, the remaining derivatives melt from the crystalline state, transforming directly into the isotropic liquid, or show amorphous behaviour. Preliminary irradiating experiments in the columnar state of cinnamoyl-substituted hexacyclene Hex-7 were carried out in order to obtain polymeric tubes.     

Self-organization of substituted azacrowns based on their discoid and amphiphilic nature

Cyclame and hexacyclene derivatives, bearing four and six long-chain substituents respectively, were synthesized. They are discussed as monolayer-forming amphiphiles as well as liquid-crystalline-phase-forming thermotropic mesogens. The compounds investigated form ordered monolayers at the gas/water interface. In the monolayer the hydrophilic cyclic head group lies flat on the water surface, whereas the hydrophobic substituents are oriented perpendicularly with respect to the interface. Most derivatives fitted with aromatic substituents exhibit a solid condensed state exclusively. In contrast with this, solid condensed as well as expanded phases can be found when spreading the aliphatic-substituted compounds. In the latter case, the onset of the phase transition takes a bump-like shape, owing to kinetic reasons. A liquid-crystalline columnar order is only achieved with hexacyclenes bearing aromatic substituents, etherified with one alkyl chain. Besides this, the remaining derivatives melt from the crystalline state, transforming directly into the isotropic liquid, or show amorphous behaviour. Preliminary irradiating experiments in the columnar state of cinnamoyl-substituted hexacyclene Hex-7 were carried out in order to obtain polymeric tubes.     

Dissipative Particle Dynamics Simulation of the Sensitive Anchoring Behavior of Smectic Liquid Crystals at Aqueous Phase

Rational design of thermotropic liquid crystal (LC)-based sensors utilizing different mesophases holds great promise to open up novel detection modalities for various chemical and biological applications. In this context, we present a dissipative particle dynamics study to explore the unique anchoring behavior of nematic and smectic LCs at amphiphile-laden aqueous-LC interface. By increasing the surface coverage of amphiphiles, two distinct anchoring sequences, a continuous planar-tilted-homeotropic transition and a discontinuous planar-to-homeotropic transition, can be observed for the nematic and smectic LCs, respectively. More importantly, the latter occurs at a much lower surface coverage of amphiphiles, demonstrating an outstanding sensitivity for the smectic-based sensors. The dynamics of reorientation further reveals that the formation of homeotropic smectic anchoring is mainly governed by the synchronous growth of smectic layers through the LCs, which is significantly different from the mechanism of interface-to-bulk ordering propagation in nematic anchoring. Furthermore, the smectic LCs have also been proven to possess a potential selectivity in response to a subtle change in the chain rigidity of amphiphiles. These simulation findings are promising and would be valuable for the development of novel smectic-based sensors.     

Regulation of aggregation and morphology of cyanine dyes on monolayers via gemini amphiphiles

The aggregation of dyes is of considerable importance in relating to their functions and applications. In this paper, we have investigated the regulation on the aggregation and morphology of two cyanine dyes, 3,3'-disulfopropyl-4,5,4',5'-dibenzo-9-methylthiacarbocyanine triethylammonium salt (MTC) and 3,3'-disulfopropyl-4,5,4',5'-dibenzo-9-phenylthiacarbocyanine triethylammonium salt (PTC), using a series of gemini amphiphiles (bis(2'-heptadecyl-3'-ethylimidazolium)-1,n-alkane dibromide, abbreviated as Gn, n=2, 4, 6, 8, 10). It has been found that both of the dyes could be adsorbed onto the monolayers of the gemini amphiphiles through the electrostatic and pi-pi interaction and stacked into H- or J-aggregate. The spacer of the gemini amphiphile showed good control over the aggregation of MTC: H-aggregate was favored when gemini amphiphiles with short spacer were applied, while J-aggregation was preferred in the case of longer spacer. Only J-aggregate was observed for PTC on gemini monolayer, regardless of the structure of the gemini amphiphiles. Interesting morphologies were observed for all the gemini/dye complex monolayers. Network structure and nanofibers were formed for the gemini/MTC films transferred below the plateau surface pressure and close to the collapse pressure, respectively. The ability of the complex monolayers to form nanofibers strongly depended on the component amphiphiles, G2>G4>G6, and no nanofibers were observed for G8/MTC and G10/MTC after the collapse. Only squared domains were observed for gemini/PTC monolayers. When both G2 and G10 were mixed, an individual control of the gemini amphiphiles over the aggregation of MTC in the complex monolayers was observed. The relationship among the spacer, dye structure, and aggregation was revealed.     

Design and interfacial behavior of two series of gemini amphiphiles with different charge positions based on imidazole moiety

Two series of gemini amphiphiles based on 2-heptadecylimidazole were designed. One is exo-BisImC17Cn (n=2, 4, 6, 8, 10), in which the positive charges are positioned on the outsides of the headgroups. The other is endo-BisImC17Cn (n = 2, 4, 6, 8, 10), whose positive charges are localized on the insides of the headgroups. The interfacial behavior at the air/water interface of these gemini amphiphiles was investigated in relation to the effect of the charge position and the spacer length. Monolayers of exo-BisImC17Cn show small differences in interfacial behavior when spread on water and aqueous Na2SO4 subphases. In contrast, significant distinctions were observed for molecules of endo-BisImC17Cn. The limiting areas of endo-BisImC17Cn monolayers on water are obviously larger than those on the aqueous Na2SO4 solution. While the limiting areas of the exo-BisImC17Cn monolayers increased monotonically with the spacer length, those of the endo-BisImC17C10 monolayer on Na2SO4 solution is obviously smaller than those of endo-BisImC17C6 and endo-BisImC17C8 monolayers, suggesting the wicket conformation of the alkyl chain in endo-BisImC17C10. On the other hand, both of the gemini amphiphiles could form complex monolayers with negatively charged TPPS at the air/water interface. The transferred complex multilayer films of the gemini amphiphiles/TPPS showed supramolecular chirality, although both of the gemini amphiphiles and TPPS are achiral. The exciton couplet was observed for the endo-BisImC17Cn/TPPS films, while no couplet was detected for the exo-BisImC17Cn/TPPS films. A reasonable comparison between the two series of geminis in relation to the effect of charge positions and the spacer lengths on the interfacial behavior and the supramolecular chirality was performed.     

Effect of a thin spreading solvent film on the efficiency of the hexadecan-1-ol monolayer deposited for water evaporation retardation

The influence of a thin spreading solvent film (ethanol, diethyl ether, and three fractions of petroleum ether boiling at 30–60 °C, 60–90 °C, and 90–120 °C) on the properties of hexadecan-1-ol (C₁₆H₃₃OH) monolayers at the air—water interface was studied. The specific evaporation resistance and the surface pressure were determined to describe the spreading behavior of the C₁₆H₃₃OH monolayers. The physical properties of the solvents and the images obtained in an atomic force microscope were examined. The time of establishing the equilibrium spreading surface pressure of monolayers can be reduced using a more volatile solvent with a lower boiling point and a lower relative density. The influence of the monolayer nature on water evaporation corresponds to the order of changing the solvent spreading rate: petroleum ether (30–60 °C) > diethyl ether > ethanol > petroleum ether (60–90 °C) > petroleum ether (90–120 °C). The monolayers formed upon petroleum ether (30–60 °C) spreading form a film with a less deficient and relatively planar surface. When ethanol is used as a spreading solvent, water evaporation is accelerated rather than retarded, while petroleum ether (30–60 °C) is more appropriate for this purpose.     

Synthesis and characterization of amphiphilic fullerenes and their Langmuir-Blodgett films

We report here the synthesis and characterization of three amphiphilic fullerene derivatives and their Langmuir-Blodgett thin films. Two of the C(60) amphiphiles are mono-derivatives with a long alkyl chain terminated with either -COOH (2) or NH(2) (3) as the hydrophilic headgroup, and the third one (5) is designed to bear the same NH(2) group as 3 but with 10 additional hydrophobic alkyl chains grafted on the C(60) sphere (Scheme 1). These amphiphiles form stable, ordered monolayers at the air-water interface. The molecular packing at the air-water interface and the mean area per molecule are determined by pressure isotherms at room temperature. Hysteresis of pressure isotherms of side chain C(60) (5) shows complete reversibility upon compression and decompression, which suggests that side chains on the C(60) sphere inhibit formation of aggregates at the air-water interface. Comparative studies of all three amphiphiles allow us to better determine the interaction between C(60)'s and their self-assembly kinetics at the air-water interface. Monolayers of monoderivatized amphiphiles (2 and 3) were transferred successfully onto quartz substrates as Z-type multilayered Langmuir-Blodgett films, and monolayers of 5 were transferred as Y-type films. Detailed characterization of the multilayer films (Z-type deposition) prepared from amine-terminated C(60) (3) using X-ray and neutron reflectometry reveals staggering of C(60) spheres and a head-to-head (Y-type) structure presumably due to flipping and reattaching of C(60) amphiphiles to the previous underlying C(60) layer.     

Unique rodlike surface morphologies in trisilanolcyclohexyl polyhedral oligomeric silsesquioxane films

A trisilanol derivative of polyhedral oligomeric silsesquioxane (POSS), trisilanolisobutyl-POSS, has recently been reported to form stable monolayers at the air/water interface. This paper explores the mono- and multilayer properties of another POSS derivative, trisilanolcyclohexyl-POSS, with pi-A isotherm and Brewster angle microscopy measurements. Results show that with continuously increasing surface concentration via symmetrical compression, trisilanolcyclohexyl-POSS amphiphiles at the air/water interface undergo a series of phase transitions from traditional Langmuir monolayers (one-POSS-molecule thick) to unique rodlike hydrophobic aggregates in multilayer films (approximately eight-POSS-molecules thick) that are dramatically different from "collapsed" morphologies seen in other systems. Stable and hydrophobic rodlike structure formation on water is presumably due to trisilanolcyclohexyl-POSS' unique molecular structure and strong tendency to form intermolecular hydrogen bonds in the solid state. This result is consistent with existing POSS/polymer composite research, which shows that POSS molecules tend to aggregate and crystallize into lamellar nanocrystals.     

Oligomeric 1,3,5-triazines containing disc-shaped penta-alkyne and triphenylene side groups

A new type of discotic oligomer systems has been realized with either penta-alkyne or triphenylene side groups attached to amino substituted 1,3,5-triazine units in the main chain. The synthesis was carried out by reaction of 2,4-dichloro-1,3,5-triazine modified penta-alkynes and triphenylenes, respectively, with hexamethylene diamine. The discotic oligomers form stable edge-on oriented monolayers at the air/water interface. The mesophase structure of the novel discotic oligomers is characterized by an unusual lamellar layer arrangement. The mesogenic layer structure of the oligomeric triphenylenes changes to a rectangular columnar arrangement by charge transfer interaction with 2,4,7-trinitrofluorenone (TNF). Dielectric investigations were performed on the oligomeric triphenylene systems to analyse the influence of flexible segments on the internal mobility within the condensed state.     

From faceted vesicles to liquid icoshedra: Where topology and crystallography meet

Many common amphiphiles spontaneously self-assemble in aqueous solutions, forming membranes and unilamellar vesicles. While the vesicular membranes are bilayers, with the hydrophilic moieties exposed to the solution, the structure formed by amphiphiles at the oil–water (i.e., alkane–water) interfaces, such as the surface of an oil droplet in water, is typically a monolayer. It has recently been demonstrated that these monolayers and bilayers may crystallize on cooling, with the thermodynamic conditions for this transition set by the geometry of the constituent molecules. While a planar hexagonal packing motif is particularly abundant in these crystals, a hexagonal lattice is incompatible with a closed-surface topology, such as a closed vesicle or the surface of a droplet. Thus, (at least) 12 five-fold defects form, giving rise to a complex interplay between the stretching and the bending energies of these two-dimensional crystals; in addition, a central role is also played by the interfacial tension. This interplay, part of which has been theoretically studied in the past, gives rise to a range of unexpected and counterintuitive phenomena, such as the recently-observed temperature-tunable formation of stable liquid polyhedra, and a tail growing and droplet-splitting akin to the spontaneous emulsification effect.     

Highly ordered assemblies of dendritic molecules bearing multi‐hydrophilic head groups

A new class of dendritic amphiphiles with multi‐hydrophilic head groups has been synthesized and characterized. The results from their surface pressure vs. area isotherms and hysteresis curves indicate that they form highly compressible and stable monolayers at the air‐water interface. The topology of dendritic monolayer and Langmuir‐Blodgett films was investigated by atomic force microscopy, which showed a highly ordered aggregation.     

Cationic Gemini surfactant at the air/water interface

The surface properties and structures of a cationic Gemini surfactant with a rigid spacer, p-xylyl-bis(dimethyloctadecylammonium bromide) ([C(18)H(37)(CH(3))(2)N(+)CH(2)C(6)H(4)CH(2)N(+)(CH(3))(2)C(18)H(37)],2Br(-), abbreviated as 18-Ar-18,2Br(-1)), at the air/water interface were investigated. It is found that the surface pressure-molecular area isotherms observed at different temperatures do not exhibit a plateau region but display an unusual "kink" before collapse. The range of the corresponding minimum compressibility and maximum compressibility modulus indicates that the monolayer is in the liquid-expanded state. The monolayers were transferred onto mica and quartz plates by the Langmuir-Blodgett (LB) technique. The structures of monolayers at various surface pressures were studied by atomic force microscopy (AFM) and UV-vis spectroscopy, respectively. AFM measurements show that at lower surface pressures, unlike the structures of complex or hybrid films formed by Gemini amphiphiles with DNA, dye, or inorganic materials or the Langmuir film formed by the nonionic Gemini surfactant, in this case network-like labyrinthine interconnected ridges are formed. The formation of the structures can be interpreted in terms of the spinodal decomposition mechanism. With the increase of the surface pressure up to 35 mN/m, surface micelles dispersed in the network-like ridges gradually appear which might be caused by both the spinodal decomposition and dewetting. The UV-vis adsorption shows that over the whole range of surface pressures, the molecules form a J-aggregate in LB films, which implies that the spacers construct a pi-pi aromatic stacking. This pi-pi interaction between spacers and the van der Waals interaction between hydrophobic chains lead to the formation of both networks and micelles. The labyrinthine interconnected ridges are formed first because of the rapid evaporation of solvent during the spreading processes; with increasing surface pressure, some of the alkyl chains reorient from tilting to vertical, forming surface micelles dispersed in the network-like ridges due to the strong interaction among film molecules.