Studies of mixed surfactant solutions of cationic dimeric (gemini) surfactant with nonionic surfactant C12E6 in aqueous medium

The interaction between the alkanediyl-alpha,omega-type cationic gemini surfactant, [(C(16)H(33)N(+)(CH(3))(2)(CH(2))(4)N(+)(CH(3))(2)C(16)H(33))2Br(-)], 16-4-16 and the conventional nonionic surfactant [CH(3)(CH(2))(10)CH(2)(OCH(2)CH(2))(6)OH], C(12)E(6) in aqueous medium has been investigated. The critical micelle concentrations of different mixtures have been measured by surface tension using a du Nouy tensiometer in aqueous solution at different temperatures (303, 308, and 313 K). Maximum surface excess (Gamma(max)) and minimum area per molecule (A(min)) were evaluated from a surface tension vs log(10)C (C is concentration) plot. The cmc value of the mixture was used to compute beta(m), the interaction parameter. The beta(sigma), the interaction parameter at the monolayer air-water interface, was also calculated. We observed synergism in 16-4-16/C(12)E(6) system at all concentration ratios. The micelle aggregation number (N(agg)) has been measured using a steady state fluorescence quenching method at a total surfactant concentration approximately 2 mM at 25 degrees C. The micropolarity and the binding constant (K(sv)) of mixed systems were determined from the ratio of intensity of peaks (I(1)/I(3)) of the pyrene fluorescence emission spectrum. The micellar interiors were found to be reasonably polar. We also found, using Maeda's concept, that the chain-chain interactions are very important in this system.     

Adsorption behavior of hydrophobin and hydrophobin/surfactant mixtures at the air-water interface

The adsorption of the surface-active protein hydrophobin, HFBII, and the competitive adsorption of HFBII with the cationic, anionic, and nonionic surfactants hexadecyltrimethylammonium bromide, CTAB, sodium dodecyl sulfate, SDS, and hexaethylene monododecyl ether, C(12)E(6), has been studied using neutron reflectivity, NR. HFBII adsorbs strongly at the air-water interface to form a dense monolayer ～30 ? thick, with a mean area per molecule of ～400 ?(2) and a volume fraction of ～0.7, for concentrations greater than 0.01 g/L, and the adsorption is independent of the solution pH. In competition with the conventional surfactants CTAB, SDS, and C(12)E(6) at pH 7, the HFBII adsorption totally dominates the surface for surfactant concentrations less than the critical micellar concentration, cmc. Above the cmc of the conventional surfactants, HFBII is displaced by the surfactant (CTAB, SDS, or C(12)E(6)). For C(12)E(6) this displacement is only partial, and some HFBII remains at the surface for concentrations greater than the C(12)E(6) cmc. At low pH (pH 3) the patterns of adsorption for HFBII/SDS and HFBII/C(12)E(6) are different. At concentrations just below the surfactant cmc there is now mixed HFBII/surfactant adsorption for both SDS and C(12)E(6). For the HFBII/SDS mixture the structure of the adsorbed layer is more complex in the region immediately below the SDS cmc, resulting from the HFBII/SDS complex formation at the interface.     

Effect of head group polarity and spacer chain length on the aggregation properties of gemini surfactants in an aquatic environment

The aggregation behavior of cationic gemini surfactants with respect to variation in head group polarity and spacer length is studied through conductance, surface tension, viscosity, and small-angle neutron-scattering (SANS) measurements. The critical micellar concentration (cmc), average degree of micelle ionization (beta(ave)), minimum area per molecule of surfactant at the air-water interface (A(min)), surface excess concentration (gamma(max)), and Gibb's free energy of micellization (delta G(mic)) of the surfactants were determined from conductance and surface tension data. The aggregation numbers (N), dimensions of micelles (b/a), effective fractional charge per monomer (alpha), and hydration of micelles (h(E)) were determined from SANS and viscosity data, respectively. The increasing head group polarity of gemini surfactant with spacer chain length of 4 methylene units promotes micellar growth, leading to a decrease in cmc, beta(ave), and delta G(mic) and an increase in N and b/a. This is well supported by the observed increase in hydration (h(E)) of micelles with increase in aggregation number (N) and dimension (b/a) of micelle.     

Adsorption and micellar properties of a mixed system of nonionic-nonionic surfactants

We study the surface adsorption and bulk micellization of a mixed system of two nonionic surfactants, namely, ethylene glycol mono-n-dodecyl ether (C12E1) and tetraethylene glycol mono-n-tetradecyl ether (C14E4), at different mixing ratios at 15 degrees C. The pure C14E4 monolayer cannot show any indicative features of phase transition because of both hydration-induced and dipolar repulsive interactions between the bulky head groups. On the other hand, the monolayers of pure C12E1 and its mixture with C14E4 undergo a first-order phase transition, showing a variety of surface patterns in the coexistence region between the liquid expanded (LE) and liquid condensed (LC) phases under the same experimental conditions. For pure C12E1, the domains are of a fingering pattern while those for the C12E1/C14E4 mixed system are found to be compact circular and small irregular structures at 2:1 and 1:1 molar ratios, respectively. The critical micelle concentration (cmc) values of both the pure and the mixed systems were measured to understand the micellar behavior of the surfactants in the mixture. The cmc values of the mixed system were also calculated assuming ideal behavior of the surfactants in the mixture. The experimental and calculated values are found to be very close to each other, suggesting an almost ideal nature of mixing. The interaction parameters for mixed monolayer and micelle formation were calculated to understand the mutual behavior of the surfactants in the mixture. It is observed that the interaction parameters for mixed monolayer formation are more negative than those of micelle formation, indicating a stronger interaction between the surfactants during monolayer formation. It is concluded that since both the surfactants bear EO units in their head groups, structural parity and hydrogen bonding between the surfactants allow them to be closely packed during monolayer and micelle formation.     

Properties of binary surfactant systems of nonionic surfactants C12E10, C12E23, and C12E42 with a cationic gemini surfactant in aqueous solutions

Properties of binary surfactant systems of nonionic surfactants poly(ethylene oxide) (PEO) lauryl ethers (C(12)E(10), C(12)E(23), C(12)E(42)) with a cationic gemini surfactant, butanediyl-α,ω-bis(tetradecyldimethylammonium bromide) (14-4-14), have been investigated by Steady-state Fluorescence (FL), zeta potential, Dynamic Light Scattering (DLS), Transmission Electron Microscopy (TEM), Cryogenic Transmission Electron Microscopy (CryoTEM), and X-ray Diffraction (XRD). Through FL measurements, critical micelle concentration (CMC) of the three binary systems for different mixing mole fractions is determined and the values fall between those of pure constituent surfactants. Ideal CMC (CMC(ideal)), mole fraction in aggregates (X), interaction parameter (β), activity coefficients (f(1) and f(2)), and excess free energy of mixing (ΔG(ex)) have been calculated. All these parameters indicate nonideal behavior and synergistic interactions between the constituent surfactants, which is explained in terms of electrostatic attraction between headgroups of constituent surfactants and reduction of electrostatic repulsion between headgroups of 14-4-14 due to the presence of nonionic surfactants. DLS, TEM and CryoTEM results show that nonionic surfactants facilitate the formation of larger aggregates. Micelles and vesicles in larger size compared with those of 14-4-14 coexist in the mixed solutions. Both surfactant composition and PEO chain length are found to play a strong effect on the properties of the binary systems.     

Micellization and mixed micellization of cationic gemini (dimeric) surfactants and cationic conventional (monomeric) surfactants: Conductometric,dye solubilization,and surface tension studies

In the present study, we have investigated the self-association, mixed micellization, and thermodynamic studies of a cationic gemini (dimeric) surfactant, hexanediyl-1,6-bis(dimethylcetylammonium bromide (16-6-16)) and a cationic conventional (monomeric) surfactant, cetyltrimethylammonium bromide (CTAB). The critical micelle concentration (CMC) of pure (16-6-16 and CTAB) and mixed (16-6-16+CTAB) surfactants was measured by electrical conductivity, dye solubilization, and surface tension measurements. The surface properties (viz., C₂₀ (the surfactant concentration required to reduce the surface tension by 20 mN/m), Π_CMC (the surface pressure at the CMC), Γ_max (maximum surface excess concentration at the air/water interface), A_min (the minimum area per surfactant molecule at the air/water interface), etc.) of micellar (16-6-16 or CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were evaluated. The thermodynamic parameters of the micellar (16-6-16 and CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were also evaluated.     

甲酰胺与正负离子表面活性剂有序溶液的研究

对羧酸钠与烷基三甲基溴化铵1：1混合体系的研究表明：常温下各体系在不同比例甲酰胺（FA）／水混合溶剂中，表面张力随浓度变化均有明显的转折点，显示了混合体系中胶团的存在．实验中发现随混合溶剂中FA比例增加，各体系的临界胶团浓度（cmc）增大．在较高温度下发现在甲酰胺中亦存在着因胶团形成而产生的表面张力-浓度对数（γ－logc）曲线的转折点，利用相分离模型对体系胶团热力学参数进行了计算．并探讨了FA对正负离子表面活性剂囊泡的影响．     

Adsorption behavior of hydrophobin and hydrophobin/surfactant mixtures at the solid-solution interface

The adsorption of surface-active protein hydrophobin, HFBII, and HFBII/surfactant mixtures at the solid-solution interface has been studied by neutron reflectivity, NR. At the hydrophilic silicon surface, HFBII adsorbs reversibly in the form of a bilayer at the interface. HFBII adsorption dominates the coadsorption of HFBII with cationic and anionic surfactants hexadecyltrimethyl ammonium bromide, CTAB, and sodium dodecyl sulfate, SDS, at concentrations below the critical micellar concentration, cmc, of conventional cosurfactants. For surfactant concentrations above the cmc, HFBII/surfactant solution complex formation dominates and there is little HFBII adsorption. Above the cmc, CTAB replaces HFBII at the interface, but for SDS, there is no affinity for the anionic silicon surface hence there is no resultant adsorption. HFBII adsorbs onto a hydrophobic surface (established by an octadecyl trimethyl silane, OTS, layer on silicon) irreversibly as a monolayer, similar to what is observed at the air-water interface but with a different orientation at the interface. Below the cmc, SDS and CTAB have little impact upon the adsorbed layer of HFBII. For concentrations above the cmc, conventional surfactants (CTAB and SDS) displace most of the HFBII at the interface. For nonionic surfactant C(12)E(6), the pattern of adsorption is slightly different, and although some coadsorption at the interface takes place, C(12)E(6) has little impact on the HFBII adsorption.     

Mixed micellization of an anionic gemini surfactant (GA) with conventional polyethoxylated nonionic surfactants in brine solution at pH 5 and 298 K

The micellization behavior of an anionic gemini surfactant, GA with nonionic surfactants C₁₂E₈ and C₁₂E₅ in presence of 0.1 M NaCl at 298 K temperature, has been studied tensiometrically in pure and mixed states, and the related physicochemical parameters (cmc, γ _cmc, pC ₂₀, Γ _max, and A _min) have been evaluated. Tensiometric profile (γ vs log [surfactant]), for conventional surfactants, generally consists of a single point of intersection; a gradually decreasing line (normally linear, or with slight curvature) ultimately saturates in γ at a particular [surfactant], corresponding to complete monolayer saturation. The gemini, in this report, led to two unequivocal breaks in the tensiometric isotherm. An attempt to the interpretation of the two breaks from molecular point of view is provided, depending solely on the chemical structure of the surfactant. The gemini, even in mixed state with the conventional nonionic surfactants C₁₂E₅ and C₁₂E₈, manifested the dual breaks; of course, the dominance of the feature decreases with increasing mole fraction of the nonionics in the mixture. Theories of Clint, Rosen, Rubingh, Motomura, Georgiev, Maeda, and Nagarajan have been used to determine the interaction between surfactants at the interface and micellar state of aggregation, the composition of the aggregates, the theoretical cmc in pure and mixed states, and the structural parameters according to Tanford and Israelachvili. Several thermodynamic parameters have also been predicted from those theories.     

Synergism and foaming properties in mixed nonionic/fatty acid soap surfactant systems

The synergism and foaming behavior of a mixed surfactant system consisting of a nonionic surfactant (polyethoxylated alkyl ether C(n)E(m)) and a fatty acid soap (sodium oleate) were studied. The micellar interaction parameter (the beta-parameter) was determined from the cmc following the approach of Rubingh's regular solution theory. For both the C(12)E(6)/sodium oleate and the C(14)E(6)/sodium oleate mixtures, the results indicate a fairly strong attractive interaction (negative beta-values), which were in agreement with previous data reported for other nonionic/anionic surfactant systems. The characteristics of the foam produced from the surfactants were evaluated using a glass column equipped with a series of electrodes measuring the conductance of the foam, which enabled the water content of the foam to be determined. From these measurements, since the total foam volume was almost the same for all concentrations and surfactants, we compared the amount of liquid in the foam produced under dynamic foaming and the ability of the foam to entrain the liquid after the airflow was switched-off (static foam stability). The amount of liquid in the foam 100 s after the air was switched-off followed the order NaOl > C(12)E(6) > C(14)E(6). Also, the mixtures had the same foam volumes as the pure surfactants at the same concentration. However, both mixtures had higher concentrations of liquid in the foam when the mole fraction of the nonionic surfactant in the mixed surfactant system was greater than about >0.3 in the solution.     

Self-aggregation of binary mixtures of alkyltriphenylphosphonium bromides: a critical assessment in favor of more than one kind of micelle formation

The micellization behavior of binary combinations of alkyltriphenylphosphonium bromides (ATPBs) with alkyl chain carbons 10, 12, 14, and 16 has been studied by conductometry and calorimetry. The combinations C(10)-C(12), C(10)-C(14), C(10)-C(16), C(12)-C(14), C(12)-C(16), and C(14)-C(16) were found to form two cmc's by both the methods, with good agreement, except C(14)-C(16)TPB, which has evidenced only a single cmc by calorimetry for all combinations. The combinations C(10)-C(12) (for both cmc(1) and cmc(2)) and C(10)-C(14)TPB (for cmc(2)) formed ideal mixtures, whereas the rest were nonideal. In the nonideal binary mixtures, the ATPB components showed antagonistic interaction with each other. The cmc, interaction parameter (beta), mixed micellar composition, extent of counterion binding, and thermodynamic parameters for the micellization process have been reported and discussed. The enthalpy of mixed micelle formation has been found to have a fair correlation with a Clint-type relation applicable to ideal binary mixtures of surfactants.     

有机反离子对C12-s-C12·2Br水溶液表面活性的影响

溶液中添加的苯磺酸钠(SNzS)和萘磺酸钠(SNphS)与C12-s-C12·2Br产生强烈结合, 增大了Gemini表面活性剂分子的疏水性, 明显促进其在气/液界面的吸附和在溶液中的聚集. 这使得体系降低水表面张力的效率和能力大大提高, 并且在表面活性剂浓度很低时就生成了小聚集体. 因而, 此时表面张力法测得的cmc仅具有表观上的意义, 只反映了表面活性剂在气/液界面达到饱和吸附时的临界浓度. SNphS的疏水性强于SNzS, 更有效地促进了C12-s-C12·2Br的吸附和聚集.     

Self-aggregation of alkyltrimethylammonium bromides (C10-, C12-, C14-, and C16TAB) and their binary mixtures in aqueous medium: a critical and comprehensive assessment of interfacial behavior and bulk properties with reference to two types of micelle formation

The detailed interfacial adsorption and micellization behavior of pure and mixed alkyltrimethylammonium bromides (ATABs: C10-, C12-, C14-, and C16TAB) were studied using tensiometric, conductometric, fluorimetric, viscometric, and calorimetric methods. The critical micellar concentration (CMC), thermodynamics of adsorption and micellization, counterion binding, aggregation number, and micellar polarity were determined. It was observed that the studied 1:1 molar mixtures of C10-C12TAB, C10-C14TAB, and C10-C16TAB, and the mixtures C12-C14TAB and C12-C16TAB at different mole ratios produced two CMCs that were supported by the conductometric, calorimetric and viscometric methods. Compared to the first micelle, the second micelle condensed more counterions and produced a higher aggregation number, but their interior polarity states were the same. The surface excess, area minimum of the ATABs at the CMC and Gibbs free energy of adsorption were evaluated and compared. The ideality/nonideality states of the mixed micelles formed in solution were tested in the light of Clint and Rubingh's formalisms; the mixed systems were found to undergo moderate to weak synergistic interaction. The contributions of the terminal methyl group, the intermediate methylene groups, and the hydrophilic tetramethylammonium group toward the standard Gibbs free energy, enthalpy, and entropy of the micellization processes were deciphered and discussed.     

Analysis of interfacial and micellar behavior of sodium dioctyl sulphosuccinate salt (AOT) with zwitterionic surfactants in aqueous media

The interfacial and bulk properties of mixtures of the anionic surfactant (dioctyl sulphosuccinate sodium salt, AOT) with zwitterionic surfactants 3-(N,N-dimethyldodecylammonio) propane sulfonate (DPS), 3-(N,N-dimethyltetradecylammonio) propane sulfonate (TPS), 3-(N,N-dimethylhexadecylammonio) propane sulfonate (HPS) have been studied employing surface tension, fluorescence, and viscometric techniques in aqueous media at 25 °C. It is observed that these mixtures exhibit synergism and these synergistic interactions increase with the enhancement of the hydrocarbon chain of the zwitterionic surfactant. The various physicochemical properties such as critical micelle concentration (cmc), surface excess concentration (Г(max)), minimum area per molecule (A(min)), aggregation number (N(agg)), interaction parameters (β(σ), β(m)), and thermodynamic parameters such as standard Gibbs free energy of adsorption (ΔG(ads)(o)), excess free energy of micellization (ΔG(ex)), and standard Gibbs free energy of micellization (ΔG(m)(o)) have been evaluated. The negative values of ΔG(m)(o) and ΔG(ads)(o) show that the micelle formation and adsorption of surfactant at the air/solution interface is energetically favorable, while a negative value of ΔG(ex) ensures stability of the mixed micelles formed. The Regular Solution Approximation, Motomura and Rosen's approaches have been used to explain and compare the results. The packing parameter (p) ensures the formation of vesicles or bilayers for AOT+DPS/TPS mixtures, which can potentially be used as delivery agents for industrial applications.     

C12-s-C12·2Br与低碳醇混合水溶液胶团化行为的温度效应和焓/熵补偿

季铵盐Gemini表面活性剂C12-s-C12·2Br(s=2,3,4,6)与丙醇、丁醇、戊醇、己醇混合水溶液的In(cmc)随温度升高而逐渐增大.计算所得热力学数据表明,C12-s-C12·2Br与醇混合胶团化过程服从熵驱动机理,也出现了焓/熵补偿现象.随着温度上升,熵驱动力增大,在指定温度时,醇分子烷烃链上碳原子数n增大使△Gm0值减小,胶团结构更加稳定;而增加s使值增大,胶团稳定性下降.     

Synthesis and properties of ionic liquid-type Gemini imidazolium surfactants

A series of ionic liquid-type Gemini imidazolium surfactants with four-methylene spacer groups were synthesized ([C(n)-4-C(n)im]Br(2), n=10, 12, 14). The surface activity and thermodynamic properties of micellization between the Gemini imidazolium surfactants and their corresponding monomers ([C(n)mim]Br, n=10, 12, 14) were compared by means of surface tension and electrical conductivity measurements. The values of cmc, gamma(cmc), pc(20), Gamma(max), and A(min) derived from surface tension measurement at 25 degrees C suggest that the surface activity of [C(n)-4-C(n)im]Br(2) is higher than that of [C(n)mim]Br. While the thermodynamic parameters of micellization (DeltaG(m)(o), DeltaH(m)(o), DeltaS(m)(o)) derived from electrical conductivity indicate that the micellization of [C(n)-4-C(n)im]Br(2) is entropy-driven, aggregation of [C(n)mim]Br is entropy-driven at low temperature but enthalpy-driven at high temperature. Finally, the activation energy of conductance (E(a)) that is associated with the effective charge is also obtained for [C(n)-4-C(n)im]Br(2) and it is constant below the cmc, but it increases above the cmc.     

C12-s-C12•2Br和C12En混合水溶液的胶团化行为

季铵盐二聚表面活性剂C12 s C12•2Br（s=2、3、4、6）和非离子表面活性剂C12E10或C12E23在水溶液中生成混合胶团.其临界胶团总浓度cmcT值介于二元复配体系中各组分的临界胶团浓度和之间.当添加少量非离子型表面活性剂（在水溶液中的摩尔分数α2=0.1）时,混合胶团中C12E10或C12E23的摩尔分数均已超过0.35;随着溶液中非离子型表面活性剂含量的增大,混合胶团中逐渐以C12E10或C12E23成分为主.     

Interfacial and Thermodynamic Properties of Anionic‐Nonionic Mixed Surfactant System: Influence of Hydrophobic Chain Length of the Nonionic Surfactant

The influence of hydrophobic chain length in nonionic surfactants on interfacial and thermodynamics properties of a binary anionic‐nonionic mixed surfactant was investigated. In this study, nonionic surfactants lauric‐monoethanolamide (C₁₂ MEA) and myrisitic‐monoethanolamide (C₁₄ MEA) were mixed with an anionic surfactant, α‐olefin sulfonate (AOS). The critical micelle concentration (cmc), maximum surface excess (Γ_max), and minimum area per molecule (A_min) were obtained from surface tension isotherms at various temperatures. The thermodynamic parameters of micellization and adsorption were also computed. Micellar aggregation number (N_agg), micropolarity, and binding constant (K_sv) of pure and mixed surfactant system was calculated by fluorescence measurements. Rubingh's method was applied to calculate interaction parameters for the mixed surfactant systems.