The group identification of organic compounds by means of thin-layer chromatography

The group identification method was presented based on the constant differences ΔR_f and ΔR_M, calculated from the chromatographic parameters obtained in two different mobile phases. The applicability of this method was proved with higher aliphatic alcohols, acids, and esters.     

pKa values in organic chemistry – Making maximum use of the available data

Acids and bases are ubiquitous. Sometimes, it is essential to know the accurate strength (pK_a values) of the acids/bases to work with, but sometimes just acidity/basicity order is enough. We often receive requests to measure pK_a values of different substances in different solvents for answering questions like “what acids can be used to protonate this substance” or “what base is able to deprotonate that compound?” Such questions can, in fact, often be answered using published pK_a data in different solvents. This digest/tutorial will give an overview of how to make efficient use of the existing pK_a data.     

Détermination, à 25°C,du produit ionique des solvants mixtes acétone+eau+perchlorate de sodium

The ionic products of different mixed solvents acetone+water with sodium perchlorate have been determined by a method of standardisation using solutions of “strong” acids and bases.The evolution of pk_i is plotted in function of molar fraction of acetone and concentration of sodium perchlorate.The approximate values of the ionic product of acetone and acetone+sodium perchlorate media (0.5 M, 1 M, 2 M, 3 M) have been achieved easily by graphical extrapolation.     

The application of thin-layer and gas chromatography to separation and identification of carbofuran and its metabolites

Conditions of chromatographical separation and identification by means of TLC and GLC were established for carbofuran and its selected metabolites, and some linear correlations

were found for the R_M and log t_R coefficient. It was stressed that additivity of chromatographic coefficients in the case of the examined substances could help with their qualitative identification when a complete set of standard compounds is not available.     

Direct Ruthenium‐Catalyzed Hydrogenation of Carboxylic Acids to Alcohols

The “green” reduction of carboxylic acids to alcohols is a challenging task in organic chemistry. Herein, we describe a general protocol for generation of alcohols by catalytic hydrogenation of carboxylic acids. Key to success is the use of a combination of Ru(acac)₃, triphos and Lewis acids. The novel method showed broad substrate tolerance and a variety of aliphatic carboxylic acids including biomass‐derived compounds can be smoothly reduced.     

A polarographic study of the hydrolysis of 1,4-benzodiazepines and its analytical applications

The mechanism of hydrolysis of flurazepam (Dalmane) and six of its metabolites was investigated in mildly acidic solution (pH 0–2) by differential pulse polarography. Simultaneous determinations of the “parent” compound(s) and hydrolytic degradation product(s) are possible because of the different reduction potentials. The kinetic results can be explained if the hydrolytic reaction is considered reversible; this is important for evaluation of the hydrolysis and absorption of 5-(o-fluorophenyl)-1,4-benzodiazepines in the stomach. The rate constants and the pK_a values corresponding to protonation of the azomethine groups are shown to be correlated. Appropriate kinetic data for other 1,4-benzodiazepines make it possible to evaluate the effects of certain substituents on the rate of hydrolysis and on the peak potentials of the “parent” compounds and their hydrolytic degradation products. The results of the kinetic investigations can be used for the identification of an isolated 5-(o-fluorophenyl)-1,4-benzodiazepine or identification of any 1,4-benzodiazepine studied here which exhibits some degree of acid hydrolysis within 24 h.     

Semicontinuous microemulsion copolymerization of vinyl acetate and butyl acrylate: high solid content and effect of monomer addition rate

Vinyl acetate and butyl acrylate were copolymerized in microemulsion under monomer-starved conditions by a semicontinuous process using different monomer addition rates (R _a). A mixture of sodium dodecyl sulfate and polyethylene glycol dodecyl ether (Brij®35) were used as surfactants. Potassium persulfate was the initiator. High copolymer content latexes (around 40 wt.%), average particle diameters (D _p)?M _w) between 180,000 and 760,000. D _p and M _w of the copolymers decrease as R _a is decreased. As R _a increases, a shoulder in the molar mass distribution was observed at high values of M _w, which was ascribed to chain transfer to polymer. Homogeneous copolymer compositions were observed throughout the reaction, which cannot be obtained by the usual batch process.     

Separation of linear hydrocarbons and carboxylic acids from ethanol and hexane solutions by reverse osmosis

In this study, asymmetric cellulose acetate membranes with moderate NaCl rejection (85.5%) were prepared and used to study the influence of the chemical nature of organic solutes in different organic solvents. The solute rejection and the solvent flux of linear hydrocarbons (M_w=226–563 g/mol) and linear carboxylic acids (M_w=228–340 g/mol) in ethanol and hexane were studied as a function of the molecular weight, the feed concentration and the transmembrane pressure.The ethanol flux was three times higher than the hexane flux. The rejection coefficients for both types of solute were quire acceptable (R=60–90%), when ethanol was the solvent. In hexane the linear hydrocarbons showed a rejection of 40–60%, while all carboxylic acids reached a negative rejection of −40 to −20%. This negative “observed” rejection can be attributed to accumulation of carboxylic acid at the membrane; the solute concentration at the membrane becomes much higher than in the bulk solution, due to a higher affinity of the solute with the membrane in hexane than in ethanol. Sorption experiments support this hypothesis.Furthermore, it was found that the rejection increases with increasing molecular weight and the rejection and flux are hardly affected by the feed concentration.     

On the assignment of SiH and SiD stretching frequencies: A reanalysis of the ν7 bands of Si2H6 and Si2D6 and a harmonic local mode force field for disilane

Assignments of ν(SiH) and ν(SiD) modes in SiHX₃, SiH₂X₂ and SiH₃X compounds are surveyed. With a few exceptions, ν(SiH)/ν(SiD) ratios are found to be those expected on the basis of harmonic local mode calculations, if ν(SiD) values are first divided by a factor R which normally lies in the range 1.010–1.011. Major deviations from this range indicate misassignments or Fermi resonances. Stretch-stretch interaction constants f′_a are tabulated, and agree excellently with ab initio values, where these are available. Where ν^is (SiH) values are known, the frequency sum rule is found to be obeyed closely. The ν₇ bands of Si₂H₆ and Si₂D₆ are reanalysed to yield an R value of 1.010. The ν(SiH) data for disilanes then yield, in a “6 × 6” refinement, values of the three interaction force constants f′_a, f′_g and f′_g, together with predictions of hitherto unlocated stretching fundamentals. Constancy of the R factor for different types of XH bonds is shown to be a consequence of Dennison's rules, and similar anharmonicity factors.     

Solubilization and Transfer Free Energy of Some Organic Compounds from Bulk Aqueous Phase to Micelle of a New Type of Surfactant

A new type of surfactant, 3‐alkoxyl‐2‐hydroxylpropyltrimethyl ammonium bromide (C_nH_2n+1OCH₂CH(OH)CH₂N(CH₃)₃ ⁺Br^?, abbreviated as R_nTAB, n=8, 12, 14, 16) was synthesized. The solubilization of n‐pentanol, n‐hexanol, n‐heptanol, benzyl alcohol, n‐hexane, benzene, toluene, heptane, and carbon tetrachloride in aqueous solutions of R_nTAB, sodium dodecyl sulfonic(R₁₂SO₃N_a), and in the mixed solution of R₁₆TAB/R₁₂SO₃N_a have been studied by the microtitration method. The experimental results show that the solubilized amounts of the organic compounds increase with the growing of the hydrocarbon chain of R_nTAB, and the solubilizing ability of the binary system is lower for polar substances than for a mono‐surfactant aqueous solution. “V” isothermal curves of the solubilized amount of polar substances have been observed, and the minimum solubilized amount is at the molar ratio 1∶1 of R₁₆TAB/R₁₂SO₃N_a. However, the solubilizing ability of mixed surfactants for non polar substances is higher than that for a mono‐surfactant solution, the solubilizing isotherm curves present a “saddle” shape, and the maximum solubilized amount is at the molar ratio 1∶1 of R₁₆TAB/R₁₂SO₃N_a too. The length of hydrophobic chains of surfactant and the polarity of the organic compound affect the transfer free energy from aqueous to micelle phase. The longer the hydrophobic chain of R_nTAB and the lower the polarity of the organic compound, the more easily will the compound transfer from aqueous phase to micelle phase.     

Organic Compounds in High Alpine Snow

Abstract

Snow samples were taken in June 1995 at the Sonnblick Observatory located at the top of Mt. Sonn-blick (3106 m a.s.l.) in the main ridge of the Austrian Alps, as part of the project “Organic Aerosol Scavenging”. The main interest focused on the determination of aliphatic compounds and phenols. First the method for the extraction of the organic compounds was developed using standard samples prepared in the lab. The preconcentration of the samples was performed by liquid-liquid extraction with hexane and hexane/diethylether respectively. To characterize the analytical procedure, the efficiency of the extraction procedure, the reproducibility of the overall method and the detection limits were determined. Values for the recovery of the extraction method range from 57% (fatty acids) to 95% (aliphatic alcohols). Reproducibility was found to be between 3-5%, except for the fatty acids which gave a value of 16%. Detection limits were calculated for the various substances and are between 5μg/l (phenols) and 30μg/l (fatty acids). The analysis of the eight snow samples were performed using a GC-MS-FID system. The following compounds were identified as major compounds in the snow samples: 1-dodecanol, 1-tetradecanol, 1-hexadecanol, 1-octadecanol, 2-isobutyl-4-methoxy-phenol, diisobutylphenol and dibutylphthalate. The aliphatic alcohols are of biogenic origin and are present in a concentration range from 30 to 115 μg/l melted snow. The phenols show concentrations between 5 and 30 μg/l and the phthalates range up to 40 μg/l.     

The C-potential surface for predicting conformations of molecules in solution

A new “C-potential” C(R _m ) for predictions of conformations, relative stabilities of isomers, transition states, of a molecule M in solution as a function of its geometry R _m is given. The potential includes all the solvent effects including the “solvophobic force” given earlier by the writer with parameters fully specified in terms of simple handbook properties of liquids. It is proved that C(R _m ) can be used in statistical mechanical equations for equilibria and for activated complex rates just as though it were an ordinary potential energy surface dependent on R _m only.     

Tetragonal distortions and vibronic coupling in hexaflouro nickel(II) and copper (II) complexes

Two parameters, axial (R_a) and equatorial (R_e) metal-ligand distances, describe the tetragonal distortions of the NiF^4?₆ and CuF^4?₆ complexes under study. The experimental values of R_a plotted vs R_e exhibit a smooth curve type dependence valid for MF₆ chromophore of solid state compounds. In the model study it becomes explained by analyzing the shape of the adiabatic potential surface (APS) of the form of E_T(R_a, R_e). Around the energy minima the map of numerical values (obtained by the quantum-chemical CNDOUHF and INDOUHF methods) was transformed to an analytic form from which the quantitative characteristics of APS were obtained in a new, simple way. The set of equatorial-axial parameters as well as the set of vibronic parameters were evaluated and discussed in more detail.     

Berechnung von mittleren Schwingungsamplituden einiger tetraedrischer Moleküle und Ionen nach der Methode der charakteristischen Schwingungen

Mean amplitudes of vibration of a series of tetrahedralXY ₄ molecules and ions (hydrides, halides, oxides and oxoanions) have been calculated using the “Method of the Characteristic Vibrations” ofA. Müller. The results indicate that this method leads to very good values for most of the investigated species, and especially in the cases of highM _X/M_Y mass ratio.     

Lipophilicity study of eight cephalosporins by reversed‐phase thin‐layer chromatographic method

The lipophilicity (R_M0) and specific hydrophobic surface area for the representatives of four generation cephalosporins have been determined by reversed‐phase thin‐layer chromatography, and the effect of different mobile‐phase modifiers (such as methanol, acetonitrile, acetone, 1,4‐dioxane and 2‐propanol) on the retention has been studied. The compounds studied showed typical retention behavior; their R_M values decreased linearly with increasing concentration of the organic modifier in the eluent. The linear correlations between the volume fraction of the organic solvent and the R_M values over a limited range were established for each solute, resulting in high values of correlation coefficients (>0.95 in most cases). R_M values were determined by various concentrations of organic modifier, and the correlation obtained was extrapolated to 0% of organic modifier. Chromatographically established logP (R_M0) parameters were compared with computationally calculated partition coefficients values (AClogP, ALOGP, KOWWIN, ALOGPs, XLOGP2, MLOGP and XLOGP3) and experimental octanol–water logP values (measured by the shake flask method). The received results demonstrate that RP‐TLC may be a good alternative technique for analytics in describing the lipophilic nature of investigated cephalosporins as well as the activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Acidity of several polyprotic acids, amiodarone and quetiapine hemifumarate in pure methanol

Methanol is the organic solvent closest to water and able to dissolve a huge amount of organic compounds. Therefore, it is a good candidate for pK_a determination of drugs sparingly soluble in water or a basic drug presented as a salt which pK_a is close to that of its counter-acid. In this work, the acidic dissociation constants in pure methanol of the most common acids used in pharmaceutical preparations (lactic, tartaric, fumaric, maleic and citric) were determined. In addition, the pK_a values of the antipsychotic quetiapine presented as hemifumarate (Seroquel) and the very insoluble antiarrhythmic amiodarone were also determined by potentiometry. From these values, the aqueous pK_a of these drugs were estimated by means of previously established equations. Estimated values are consistent with those from literature and show the interest of methanol for drug discovery pK_a measurements.     

Diels-Alder adducts of 3-N-substituted derivatives of (−)-Cytisine as influenza A/H1N1 virus inhibitors; stereodifferentiation of antiviral properties and preliminary assessment of action mechanism

The synthesis and anti-influenza activity study of Diels-Alder adducts of 3-N-substituted derivatives of (−)-cytisine with N-substituted maleimides are described. Synthesized compounds were studied for antiviral activity against influenza virus A/California/07/09 (H1N1)pdm09 in MDCK. The values of CC₅₀, IC₅₀ and selectivity indexes (SI) of obtained derivatives were determined. It was shown that anti-influenza activity of ‘α-endo’ adducts is higher (SI of three samples is 79 and higher) than activity of ‘β-endo’ adducts. By means of ‘time-of-addition’ experiment it was established that the leading compound (3aS,4R,8S,12R,12aR,12bS)-10-benzyl-2-phenyloctahydro-1H-4,12a-etheno-8,12-methanopyrrolo[3′,4':3,4]pyrido[1,2-a][1,5]diazocine-1,3,5(4H)-trione (16a) demonstrates anti-influenza activity at the middle and late stages of the virus life cycle. The possibility of interaction of synthesized derivatives with the active sites of the PA_N and PB2 was estimated via in silico approach. The difference in the locations of ‘α-endo’ and ‘β-endo’ adducts in PB2 active site (5JUN) is offered as an explanation of the dependence of their virus-inhibiting properties on stereochemistry.     

Synthesis and spectral properties of hexafluoroaurates

It is established that krypton difluoride (KrF₂) interacts with metallic gold in anhydrous hydrogen fluoride (HF) in the presence of alkaline and alkaline-earth metal fluorides with the formation of complex hexafluoroaurates with the general formula M^IAu^VF₆ (M^I = Li, Na, K, Rb, Cs) and bis-hexafluoroaurates M^II(Au^VF₆)₂ (M^II = Mg, Ca, Sr, Ba). As a result of the subsequent interaction of bis-hexafluoroaurates with krypton difluoride, new coordination compounds with the composition M^II(Au^VF₆)₂ · nKrF₂ (M^II = Ca, Sr, Ba; n = 0–4) were synthesized. The Raman spectra were studied and a comparative analysis of the Raman spectra of the obtained compounds was performed. The possible variants of the structural transformation of the AuF ₆ ^? anions in compounds and the position and character of the chemical bond of the “guest” (KrF₂) in these compounds are discussed.     

Thermogravimetric analysis of co-combustion of biomass and biochar

The co-combustion of biomass and biochar was investigated by thermogravimetric analysis. Several thermal parameters and mean reactivity index (R _M) for different blends were used to evaluate co-combustion features. As the biomass content increased from 30 to 90 mass%, volatile releasing temperature (T _v), burnout temperature (T _b), and the temperature at the maximal peak (T _max) generally reduced, while average mass loss rates (R _a) and R _M increased, the maximum mass loss rate (R _max) initially decreased and then increased. Results showed that biochar additions enhanced biomass fuel reactivity over weighted average in main combustion region. Besides, blends with 10–30 mass% of biochar behaved better than those with higher biochar ratio. Synergy exists between the two components and better combustibility is feasible by co-firing biochar with biomass.