Bis-indole derivatives for polysaccharide compositional analysis and chiral resolution of D-, L-monosaccharides by ligand exchange capillary electrophoresis using borate-cyclodextrin as a chiral selector

A series of aldo-bis-indole derivatives (aldo-BINs) was prepared by aromatic C-alkylation reactions of aldoses and indole in acetic acid solution. Common monosaccharides such as glucose, mannose, galactose, fucose, xylose, rhamnose, ribose, arabinose and N-acetylglucosamine were smoothly derivatized to form the UV absorbing aldo-BINs. The use of a capillary electrophoretic method to separate these novel aldo-BIN derivatives was established. The capillary electrophoresis conditions were set by using borate buffer (100 mM) at high pH (pH 9.0). The limit of determination was assessed to be 25 nM. The enantioseparation of D, L-pairs of aldo-BINs based on chiral ligand-exchange capillary electrophoresis technology was also achieved by using modified hydroxypropyl-β-cyclodextrin as the chiral selector in the presence of borate buffer. This aldose labeling method was applied successfully to the compositional and configurational analysis of saccharides, exemplified by a rapid and efficient method to simultaneously analyze the composition and configuration of saccharides from the medicinal herbs Cordyceps sinensis and Dendrobium huoshanense.     

Determination of 1-aminocyclopropane-1-carboxylic acid in apple extracts by capillary electrophoresis with laser-induced fluorescence detection

A rapid and sensitive method for the determination of 1-aminocyclopropane-1-carboxylic acid (ACC) in apple tissues has been described. This method is based on the derivatization of ACC with 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ), and separation and quantification of the resulting FQ-ACC derivative by capillary electrophoresis coupled to laser-induced fluorescence detection (CE-LIF). Our results indicated that ACC derivatized with FQ could be well separated from other interfering amino acids using 20 mM borate buffer (pH 9.35) containing 40 mM sodium dodecyl sulfate and 10 mM Brij 35. The linearity of ACC was determined in the range from 0.05 to 5 microM with a correlation of 0.9967. The concentration detection limit for ACC was 10 nM (signal-to-noise = 3). The sensitivity and selectivity of this described method allows the analysis of ACC in crude apple extracts without extra purification and enrichment procedure.     

Direct multicomponent analysis of beer samples constituents using micellar electrokinetic capillary chromatography

A capillary electrophoretic method was developed using micellar electrokinetic capillary chromatography (MEKC) with diode-array detection to analyze simultaneously 26 beer constituents in a single procedure, including alcohols, iso-alpha-acids, amino acids, flavonoids, isoflavonoids, a vitamin, purine and pyrimidine bases. After filtration, sample components were separated with an uncoated capillary and a 25 mM sodium borate and 110 mM SDS buffer at pH 10.5. Analyses were run at 14 kV and 8 s of hydrodynamic injection with UV detection at 210 nm and 270 nm. The proposed method was successfully applied to the direct determination of beer constituents without any sample cleanup procedures.     

Simultaneous determination of <Emphasis Type="Italic">p</Emphasis>-hydroxyacetophenone,chlorogenic acid,and caffeic acid in Herba Artemisiae Scopariae by capillary electrophoresis with electrochemical detection

Capillary electrophoresis with electrochemical detection has been employed for the determination of p-hydroxyacetophenone, chlorogenic acid, and caffeic acid in Herba Artemisiae Scopariae (the dried sprout of Artemisia scoparia Waldst. et Kit.). The effects of several important factors, such as the concentration and the acidity of the running buffer, separation voltage, injection time, and detection potential, were investigated to acquire the optimum conditions. The detection electrode was a 300-μm-diameter carbon disc electrode at a working potential of +0.90 V (relative to the saturated calomel electrode). The three analytes can be well separated within 11 min in a 40-cm-long fused-silica capillary at a separation voltage of 15 kV in 50 mM borate buffer (pH 9.2). The relation between peak current and analyte concentration was linear over about 3 orders of magnitude, with detection limits (signal-to-noise ratio of 3) of 0.31, 0.39, and 0.50 μM for p-hydroxyacetophenone, chlorogenic acid, and caffeic acid, respectively. The proposed method has been successfully applied to monitor the three bioactive constituents in real plant samples and to differentiate between different herbal drugs with satisfactory assay results.     

Determination of Podophyllotoxin and 4′-Demethylepipodophyllotoxin by Capillary Electrophoresis

A new simple, rapid and sensitive capillary zone electrophoresis (CZE) method has been developed for the simultaneous separation and determination of the anticancer active compounds podophyllotoxin (PPT) and 4′-demethylepipodophyllotoxin (DMEP) in ethanol extracts of the roots of Sinopophyllum emodi (Wall) Ying, and the roots, stems, leaves and fibrils of Dysosma versipellis (Hance) M. cheng. PPT and DMEP could be completely separated and sensitively determined at 214 nm within 12.5 min using 25 mM borate with pH 10.80 as running buffer (applied voltage 20 kV, temperature 20 °C, injection time 5 s). The linear range for the determination of PPT and DMEP were 1.5–171.0 μg mL⁻¹ and 5.0–136.0 μg mL⁻¹ with RSD of the relative migration time for PPT and DMEP of 1.50 and 3.26, and of the relative peak area of 0.82 and 1.13, respectively. The results showed that the method had requisite selectivity, sensitivity, reproducibility and wide linear range for the application to the rapid separation and accurate determination of PPT and DMEP in podophyllum plants. Furthermore, this is the first report about the analysis of podophyllotoxin analogues by CE.     

毛细管电泳-激光诱导荧光用于中药制剂中氨基酸成分的分析

建立了一种用于测定中药制剂中氨基酸成分的毛细管电泳-荧光检测方法. 用含有α-环糊精(α-CD)的硼砂缓冲溶液为背景电解质, 经异硫氰酸荧光素(FITC)衍生的5种氨基酸在50 min内可以得到很好的分离和测定. 考查了各个分离参数对分离的影响, 得到的优化条件为: 含45 mmol/L的α-环糊精的80 mmol/L硼砂缓冲溶液(pH值9.2)作为背景电解质, 分离电压20 kV; 柱温22 ℃. 衍生试剂FITC与单个氨基酸的化学计量比为4∶1时, 能够获得稳定荧光强度的氨基酸衍生物. 在优化条件下, 各氨基酸成分在73.5～2900 nmol/L 的浓度范围内呈良好的线性关系(相关系数r2为0.9906～0.9998). 保留时间和峰面积的相对标准偏差分别为0.8%～3.0%和0.7%～5.7%, 检测限(3倍信噪比)为3.5～35 nmol/L. 该方法准确可靠, 可用于质量控制为目的的中药制剂中氨基酸成分的定量测定.     

Far infrared-assisted extraction followed by MEKC for the simultaneous determination of flavones and phenolic acids in the leaves of Rhododendron mucronulatum Turcz

A method based on micellar electrokinetic chromatography with amperometric detection and far infrared‐assisted extraction has been developed for the simultaneous determination of two flavones (rutin and farrerol) and three phenolic acids (syringic acid, vanillic acid, and 4‐hydroxybenzoic acid) in the dried leaves of Rhododendron mucronulatum Turcz., a commonly used traditional Chinese medicine. The effects of some important factors such as the voltage applied on the infrared generator, irradiation time, the concentration of borate and sodium dodecylsulfate (SDS), separation voltage, and detection potential were investigated to acquire the optimum conditions. The detection electrode was a 300‐μm diameter carbon disc electrode. The five analytes could be well separated within 8 min in a 40 cm‐long capillary at a separation voltage of 12 kV in a 50 mM borate buffer (pH 9.2) containing 50 mM SDS. The relationship between peak current and analyte concentration was linear over about three orders of magnitude with the detection limits (S/N=3) ranging from 0.20 to 0.46 μM. The results indicated that far infrared irradiations significantly enhanced the extraction efficiency. The extraction time was substantially reduced to 6 min compared with 3 h for conventional hot solvent extraction.     

Far infrared‐assisted removal of extraction solvent for capillary electrophoretic determination of the bioactive constituents in Plumula Nelumbinis

Far infrared radiation was employed in the rapid removal of the solvents in the extracts of Plumula Nelumbinis and standard mixture solutions to prevent the interference of the solvent peaks toward their capillary electrophoretic measurements. The sample solutions in small vials were exposed to far infrared ray at 60°C for 3 min to remove solvent. The dried samples in the vials were each dissolved into running buffer with the aid of ultrasonication for capillary electrophoresis analysis. The far infrared‐assisted solvent removal approach was sucessfully applied in the rapid determination of neferine, liensinine, isoliensinine, rutin and hyperoside in Plumula Nelumbinis. The five analytes could be well separated within 12 min in a 40 cm long fused silica capillary at a separation voltage of 12 kV in a 50 mM borate buffer (pH 9.2). The results indicated that the interferences of the solvent peaks in the capillary electropherograms of the herbal drugs were eliminated completely.     

Determination of parabens in pharmaceutical and cosmetic products by capillary electrophoresis

A validated capillary electrophoresis method for the determination of parabens-methyl, ethyl, propyl, and butyl is described. The optimum results were obtained by the use of a run buffer containing 20 mM borate buffer (pH 9.0) with 10% methanol and by applying a voltage of 20 kV, a low hydrodynamic injection of 10 s, and detecting the signals at 200 nm. Moxifloxazin was used as an internal standard. All parabens were separated within 10 min. The method showed a good repeatability, linearity, and sensitivity. It was applied to the determination of parabens in pharmaceutical and certain cosmetic products. The text was submitted by the authors in English.     

β-环糊精衍生化胰酶的合成及其手性分离性能研究

研究了β-环糊精衍生化胰酶的合成以及作为毛细管电色谱手性选择剂的分离性能. 利用乙二醇二环氧丙烷醚作为交联剂, 将β-环糊精接枝到胰酶蛋白的主链, 得到了β-环糊精衍生化胰酶. 将其通过化学键合连接到毛细管柱内壁, 制备了β-环糊精衍生化胰酶毛细管电色谱柱. 在加压毛细管电色谱模式下, 利用该柱分离了色氨酸、扑尔敏、布洛芬、异丙嗪和阿托品等对映异构体, 得到了理想的分离效果, 且在分离扑尔敏时, 随着电压的增加, 对映异构体分离的分离度和相对保留时间均增加.     

CE Determination of Droperidol in Tablets and Human Serum

A capillary electrophoretic method was described for the determination of droperidol in pharmaceutical tablets and human serum. Droperidol and internal standard, lansoprazole, were separated on an uncoated fused-silica capillary using a run buffer containing borate (10 mM; pH 9.3) and aqueous methanol (20%, υ/υ). The signals were detected at 210 nm. The migration times for droperidol and internal standard were 2.1 and 2.9 min, respectively. The method has been validated in the range of 2.2 × 10^?5 ? 7.8 × 10^?5 M and applied to both tablets and human serum with good repeatability and no interference.     

Determination of carbohydrates as their 3-aminophthalhydrazide derivatives by capillary zone electrophoresis with on-line chemiluminescence detection

A method based on pre-capillary derivatization with luminol (3-aminophthalhydrazide) for carbohydrate analysis using capillary electrophoresis with on-line chemiluminescence (CL) detection was developed. The derivatives of seven monosaccharides were separated and detected by using 200 mM borate buffer containing 100 mM hydrogen peroxide at pH 10.0 as separation electrolyte and 25 mM hexacyanoferrate in 3 M sodium hydroxide solution as post-capillary chemiluminescence reagent with separation efficiencies ranging from 160,000 to 231,000 plates per metre. The minimum amount of carbohydrate derivatized was 2 pmol (corresponding to the concentration of 2 microM). The method also provided a linear response for glucose in the concentration range of 0.1-250 microM with a mass detection limit of 420 amol or a concentration detection limit of 0.1 microM. Preliminary work using the CE-CL format to determine glucose in a rat brain microdialysis sample is presented as a typical case.     

Continuous flow derivatization system coupled to capillary electrophoresis for the determination of amino acids

A derivatization system coupled to capillary electrophoresis for the determination of amino acids using 1,2-naphthoquinone-4-sulfonate as a labeling agent is described. In this system, amino acids are derivatized on-line in a three-channel flow manifold for sample, reagent and buffer solutions. The reaction takes place in a PTFE coil heated at 80 degrees C. The resulting solution, which contains the amino acid derivatives, is introduced into the electrophoretic system by means of an appropriate interface. Subsequently, amino acid derivatives are separated at 25 kV using a 40 mM sodium tetraborate aqueous solution with 30% (v/v) isopropanol solution as a running buffer. The electropherograms are monitored spectrophotometrically at 230 nm. The method has been applied to the determination of amino acids in feed samples and pharmaceutical preparations. A good concordance of the predicted values with those given by a standard amino acid analyzer is shown.     

Method development and validation for the simultaneous determination of four coumarins in Saussurea superba by capillary zone electrophoresis

A capillary zone electrophoretic method has been developed for the determination of four coumarins--skimmin, scopolin, scopoletin, and umbelliferone-in Saussurea superba with UV detection at 254 nm. The capillary temperature was kept constant at 25 degrees C. Effects of buffer pH, electrolyte concentration, organic modifier, and applied voltage on migration behavior were studied systematically. The optimum conditions for separation were achieved by using 30 mM borate buffer at pH 9.02 containing 15% (v/v) methanol as the electrolyte and 25 kV as the applied voltage. For all analytes a good linear regression relationship (r > 0.999) was obtained between peak area and concentration over a relatively wide range. The method was validated for repeatability, precision, and accuracy. The validated method was successfully applied to the simultaneous determination of the four analytes in S. superba.     

Separation of derivatized carbohydrates by co-electroosmotic capillary electrophoresis

Summary The separation of derivatized carbohydrates has been performed by co-electroosmotic capillary electrophoresis. Derivatization was performed by reductive amination of the carbohydrates with ethylp-aminobenzoate or withp-aminobenzonitrile. Separation selectivity is optimized using buffer electrolytes containing high concentrations of borate, organic solvents, and mixtures thereof; this enabled separation of the carbohydrate derivatives then direct UV detection. Co-directional migration of the anionic analytes with the electroosmotic flow was achieved by adding a cationic polyer (hexadimethrine bromide, HDB) to the electrolyte. With this method it is possible to determine specific carbohydrates, such as arabinose, mannose, and glucose, which are difficult to separate by other CE methods. The applicability of the method is demonstrated for the analysis of plant hydrolyzates     

Simultaneous Determination of Four Major Iridoid Glycosides in Scrophularia ningpoensis by CE

A simple, accurate and reproducible capillary electrophoresis method with UV detection has been developed for the simultaneous determination of four iridoid glycosides, 6-O-methyl-catalpol, aucubin, harpagide, and harpagoside, in Scrophularia ningpoensis (Xuan-shen). The running buffer was 100 mM borate (pH 9.3) containing 20% methanol. Applied voltage was 20 kV and temperature was 25 °C. Diphylloside A was used as an internal standard (IS) and detection was at 200 nm. The effects on separation of buffer pH, buffer concentration, and organic modifiers were investigated. The extracts of S. ningpoensis were well separated within 45 min.

     

Capillary electrophoretic determination of the component monosaccharides in hemicelluloses

This study describes the precolumn derivatization of carbohydrates with p-aminobenzoic acid and their efficient separation as borate complexes by means of capillary zone electrophoresis, using a capillary tube of fused silica containing 150 mmol/L borate buffer, pH 10.0, as carrier. On-column UV-monitoring at 285 nm allowed the detection of aldoses and uronic acids in the lower femtomole range. Reproducible quantification of carbohydrates was achieved at least in the concentration range of 0.1–10 mmol/L by the relative peak area method, using cinnamic acid as internal standard. The method was successfully applied to the determination of the monosaccharide composition of both commercially obtained xylans as well as of hemicelluloses obtained by hydrothermal degradation of biomass.     

Determination of biogenic amines in lake water by micellar electrokinetic chromatography with fluorescence detection after derivatization with fluorescamine

A simple and rapid method has been developed for the determination of biogenic amines in lake water using micellar electrokinetic chromatography with fluorescence detection. Separation of fluorescamine derivatized biogenic amines was accomplished by using borate buffer of pH 9.5 containing 40 mM of sodium dodecyl sulphate. The method has been optimized with respect to fluorescamine concentration, reaction pH, reaction time, separation voltage and injection time. Detection was performed by using UG-11 excitation filter and 495 nm emission filter. The proposed method for histamine, tyramine and dopamine allowed their separation within 2 min with detection limits in nM range. The interday and intraday reproducibility of peak areas were less than 6.5%. Recovery of spiked samples was 95.76–116.31%.     

Determination of triazine compounds in ground water samples by micellar electrokinetic capillary chromatography

In this work, a capillary electrophoresis (CE) method for the determination of a group of eleven triazine compounds by micellar electrokinetic capillary chromatography (MEKC) with diode array detection was developed. The eleven herbicides studied were: desethylatrazin-2-hydroxy (DEA), simazine, prometon, atrazine, simetryn, ametryn, propazine, prometryn, trietazine, terbutylazine, and terbutryn The separation of these compounds was optimised as a function of buffer concentration and pH, concentration of sodium dodecyl sulphate (SDS) and voltage applied. To increase the selectivity of the separation and the resolution of the solutes, different organic solvents were tested as buffer additives, obtaining the best results when 1-propanol was used. The optimised buffer (24 mM of sodium borate, 18 mM of disodium hydrogen phosphate, 25 mM of SDS, pH 9.5, and 5% of 1-propanol) provides the best separation in terms of resolution and migration time. This method allowed the determination of these compounds at concentrations of 0.05 μg l⁻¹ in ground water samples pretreated using solid-phase extraction (SPE).     

Determination of antibacterial flomoxef in serum by capillary electrophoresis

A determination method of flomoxef (FMOX) concentration in serum by capillary electrophoresis is developed. Serum samples are extracted with acetonitrile. After pretreatment, they are separated in a fused-silica capillary tube with a 25 mM borate buffer (pH 10.0) as a running buffer that contains 50mM sodium dodecyl sulfate. The FMOX and acetaminophen (internal standard) are detected by UV absorbance at 200 nm. Linearity (0-200 mg/L) is good, and the minimum limit of detection is 1.0 mg/L (S/N = 3). The relative standard deviations of intra- and interassay variability are 1.60-4.78% and 2.10-3.31%, respectively, and the recovery rate is 84-98%. This method can be used for determination of FMOX concentration in serum.