Duffing-van der Pol系统的随机分岔

应用广义胞映射图论方法(GCMD)研究了在谐和激励与随机噪声共同作用下的Duffing-van der Pol系统的随机分岔现象. 系统参数选择在多个吸引子与混沌鞍共存的范围内. 研究发现, 随着随机激励强度的增大,该系统存在两种分岔现象: 一种为随机吸引子与吸引域边界上的鞍碰撞, 此时随机吸引子突然消失; 另一种为随机吸引子与吸引域内部的鞍碰撞, 此时随机吸引子突然增大. 研究证实, 当随机激励强度达到某一临界值时, 该系统还会发生D-分岔(基于Lyapunov指数符号的改变而定义), 此类分岔点不同于上述基于系统拓扑性质改变所得的分岔点.     

随机激励对软弹簧杜芬振子动力学的分散作用

讨论了有界噪声激励对软弹簧杜芬振子的倍周期分岔至混沌运动的影响。利用蒙特卡罗方法,通过对系统受侵蚀安全盆的变化状况进行了观察,并由此对后继动力学分析的初始点进行了选取。系统的相图、倍周期分岔图以及庞加莱映射图等方面的数值结果表明,外加随机激励的作用往往掩盖原确定性系统内在的规则运动,对原确定性系统的运动具有较典型的分散作用,可延缓系统的倍周期分岔,也可使得系统内在随机行为提前发生,即可使得系统更容易出现混沌运动。     

有界噪声激励下Josephson系统的混沌运动

利用随机Melnikov方法分析了有界噪声激励下Josephson系统的运动,并运用均方准则得到了系统产生混沌的临界值。结果表明:有界噪声对系统混沌行为的产生起到了加速的作用;且有界噪声的强度越大,混沌吸引子的发散程度就越大。最后利用数值模拟得到系统的庞加莱映射,分析了在不同参数组合下系统庞加莱映射的特征。结果显示:当有界噪声中的一个参数发生改变,系统的庞加莱映射也会发生相应的改变;特别是有界噪声的激励强度增大时,系统庞加莱映射的发散程度也会随之增大。这从侧面验证了理论结果的正确性。     

随机噪声作用下梁结构的非线性振动研究

考虑随机噪声影响,研究一端固支一端夹支的梁结构在横向外激励扰动下的非线性振动。首先,基于里兹-伽辽金法得到梁的振动控制方程并将其无量纲化,随后引入随机噪声进一步得到系统的随机动力学模型。在此基础上考虑高斯白噪声和有界噪声,分别研究2种随机噪声对梁结构随机动力学行为的影响,并利用随机Melnikov法求出系统的混沌阈值,得到2种随机噪声影响下系统的三维混沌阈值图。由数值计算结果可知,阻尼系数、外激励幅值和随机噪声对梁结构的振动都有影响,且阻尼小、外激励幅值大和随机噪声强都更容易导致随机系统产生混沌运动。此外,通过本研究可以分析比较不同随机噪声(如高斯白噪声和有界噪声)对梁结构振动状态的影响,从而以抑制梁结构在随机噪声影响下产生混沌运动为目的,提出更好的降噪方法。     

随机干扰与随机参数激励联合作用下的Hopf分叉

本文研究van der Pol-Duffing型的非线性振子在随机干扰和随机参数联合作用下的Hopf分叉现象。本文所得结果证实了当系统处在于Hopf分叉点附近时,对系统的参数的变化具有敏感性。在研究过程中,我们利用Markov扩散过程逼近系统的随机响应,得到了沿稳定矩的概率1稳定和矩稳定的条件。对于非线性振子,我们得到了振幅过程的稳态概论密度函数。研究发现,确定性系统的Hopf分叉点在随机参数作用下具有漂移现象,这种漂移是由系统的性质所决定的,当分叉点为超临界的,分叉点向前漂移;而当分叉点为亚临界时,这种漂移是向后的。当系统处在外部随机干扰作用下时,系统出现非零响应。另外我们发现,稳态矩的分叉与其阶数无关。     

Melnikov方法在输流管混沌运动研究中的应用

对基础简谐运动激励下两端固定输流管道的混沌运动进行了研究，推导出了系统的运动方程，确定了系统存在的平衡点及其稳定性，计算出了未扰系统的同宿轨道，并利用Melnikov方法得到了系统发生混沌运动时参数需满足的临界条件，同时还利用相平面图和：Poincare映射等方法对管道的混沌运动进行了数值模拟，通过比较发现，由Melnikov方法确定的临界参数值要稍小于数值模拟中首次观察到混沌运动时对应的临界值。     

磁场中旋转运动圆板的分叉与混沌研究

应用数值模拟方法研究磁场中旋转运动圆板的分叉与混沌问题。首先,基于薄板理论和麦克斯韦电磁场方程组,给出了动能、应变势能、外力虚功以及电磁力的表达式,再利用哈密顿原理,得到磁场中旋转运动圆板横向振动的非轴对称非线性磁弹性振动微分方程组。其次,采用贝塞尔函数作为圆板的振型函数进行伽辽金积分,得到了轴对称情况下横向振动的常微分方程组表达式。最后,针对主共振,取周边夹支边界条件的圆板作为算例,得到了当振型函数取一阶时,将磁感应强度、外激励振幅和激励频率作为控制参数的分叉图及庞加莱映射图等计算结果,并讨论了分叉参数对系统的分叉与混沌的影响。数值计算结果表明,这些控制参数的变化影响系统稳定性,在分叉参数逐渐变化的过程中,系统经历从混沌到多倍周期运动再到混沌的往复过程。     

1／2亚谐共振──主参数共振情况下非线性振动系统的余维2退化分叉

本文应用Normal Form理论和退化向量场的普适开折理论研究了参数激励与强迫激励联合作用下非线性振动系统的余维2退化分叉,用Melnikov方法讨论了全局分叉的存在性.     

一类慢变参数振子系统的同宿分叉及其安全盆侵蚀

分析一个具有慢变参数的非线性系统,利用Ｍｅｌｎｋｏｖ方法,分析了系统在参数发生变化时的同宿分叉,同时利用分叉结果,数值讨论了当系统参数发生变化时安全盆的侵蚀及分叉,混沌的联系。     

非自治复合材料层合板的混沌动力学

本文研究了参数激励与外激励联合作用下的简支对称铺设的复合材料层合板的多脉冲混沌动力学.基于经过Galerkin方法截断后的两自由度非自治常微分方程,运用广义Melnikov方法研究了复合材料层合板的多脉冲混沌动力学行为.直接以非自治常微分方程为研究对象,省去了利用多尺度方法和规范形理论两次化简,更加接近原系统的性质.数值计算也发现了复合材料层合板系统存在多脉冲混沌运动,进一步验证了理论分析结果.     

Electrogas- and electrohydrodynamic control of gas and liquid jets and flows

The physical and mathematical principles of the method of electrogas-and electrohydrodynamic conversion of electrical signals to pneumatic (hydraulic) signals and vice versa for control of gas and liquid jets and flows in electropneumohydraulic systems are considered. St. Petersburg State Technical University, St. Petersburg 195251. Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 41, No. 2, pp. 25–31, March–April, 2000.     

Fatigue and static strength of notched and unnotched aluminum-alloy and steel specimens

This paper describes a method of presentation of fatigue data on three commonly used aircraft materials, 2024-T3 and 7075-T6 aluminum alloys and normalized SAE 4130 steel, such that variations in fatigue strength with stress-concentration factor can be shown. Comparisons of the fatigue strengths of 2024-T3 and 7075-T6 aluminum are made for the most useful range of stress-concentration factors. Static-strength results of notched and unnotched specimens of the three materials are presented to show how the strength varies with some parameters of the stress concentration. Comparison of the data with one theory for the strength of cracked specimens was made.     

STICTION AND ANTI—STICTION IN MEMS AND NEMS

Stiction in microelectromechanical systems (MEMS) has been a major failure mode ever since the advent of surface micromachining in the 80s of the last century due to large surfacearea-to-volume ratio. Even now when solutions to this problem are emerging, such as self-assembled monolayer (SAM) and other measures, stiction remains one of the most catastrophic failure modes in MEMS. A review is presented in this paper on stiction and anti-stiction in MEMS and nanoelectromechanical systems (NEMS). First, some new experimental observations of stiction in radio frequency (RF) MEMS switch and micromachined accelerometers are presented. Second, some criteria for stiction of microstructures in MEMS and NEMS due to surface forces (such as capillary, electrostatic, van der Waals, Casimir forces, etc.) are reviewed. The influence of surface roughness and environmental conditions (relative humidity and temperature) on stiction are also discussed. As hydrophobic films, the self-assembled monolayers (SAMs) turn out able to prevent release-related stiction effectively. The anti-stiction of SAMs in MEMS is reviewed in the last part. The project supported by the Distinguished Young Scholar Fund of NSFC (10225209), key project from the Chinese Academy of Sciences (KJCX2-SW-L2) and National “973” Project (G1999033103)     

水和水蒸汽热力学物性参数及导数的计算与应用

本文针对现代换热设备设计、两相流动与传热研究的需要,介绍了可供科研使用的水和水蒸汽物性计算方法,完善了计算程序。根据超临界锅炉设计中的超临界水的物性计算,两相流研究和换热设备动态特性研究中对物性导数计算的需要,提供了两个算例,并进行了定性分析。     

Microcanonical Entropy and Mesoscale Dislocation Mechanics and Plasticity

A methodology is devised to utilize the statistical mechanical entropy of an isolated, constrained atomistic system to define constitutive response functions for the dissipative driving-force and energetic fields in continuum thermomechanics. A thermodynamic model of dislocation mechanics is discussed as an example. Primary outcomes are constitutive relations for the back-stress tensor and the Cauchy stress tensor in terms of the elastic distortion, mass density, polar dislocation density, and the scalar statistical density.     

Sound and vorticity interactions: transmission and scattering

We review several aspects of the propagation of sound in vortical flows. We restrict ourselves to isothermal, humidity-free flows at low Mach number M. Since vorticity plays a major role in vortex-flow interactions we focus on vortical flows. We consider two main canonical situations. The first concerns the transmission of sound. We analyze the evolution of acoustic wavefronts as they propagate across a single vortex. The second situation addresses the scattering of sound waves by nonstationary vortices. We study the evolution of the acoustic pressure emitted in the far field, at an angle with the initial direction of propagation. In this geometry one performs direct spectroscopy of the flow vorticity field. In each case, we review theoretical results and compare with experimental measurements and numerical simulations when available. We also briefly report how the following new acoustic techniques have recently been used to study complex or turbulent flows: time-resolved acoustic spectroscopy, speckle interferometry and Lagrangian particle tracking. PACS 43.25, 43.28, 47.32, 67.40     

Data-driven modeling and learning in science and engineering

In the past, data in which science and engineering is based, was scarce and frequently obtained by experiments proposed to verify a given hypothesis. Each experiment was able to yield only very limited data. Today, data is abundant and abundantly collected in each single experiment at a very small cost. Data-driven modeling and scientific discovery is a change of paradigm on how many problems, both in science and engineering, are addressed. Some scientific fields have been using artificial intelligence for some time due to the inherent difficulty in obtaining laws and equations to describe some phenomena. However, today data-driven approaches are also flooding fields like mechanics and materials science, where the traditional approach seemed to be highly satisfactory. In this paper we review the application of data-driven modeling and model learning procedures to different fields in science and engineering.