Effects of Surface Modification of Upconversion Nanoparticles on Cellular Uptake and Cytotoxicity

Lanthanide-doped upconversion nanoparticles(UCNPs) are great promising to apply to biomedical imaging and therapy. We prepared NaYF₄:Yb³⁺,Er³⁺ nanoparticles with different surface ligands, i.e., without any ligands(bare), coordinated with 2-aminoethyl dihydrogen phosphate(AEP), polyacrylic acid(PAA) or polyallylamine (PAAm), via a simple two-step ligand exchange of oleic acid capped NaYF₄:Yb³⁺,Er³⁺ nanoparticles. Although the surface modification retained the crystal structure and transimission electron microscope(TEM) size distribution of the nanoparticles, and good dispersibility in aqueous solution and did not significantly change the upconversion luminescence, distinct differences were observed in the surface charge and hydrodynamic diameter. The cellular uptake and cytotoxicity of the nanoparticles were studied on two different cell lines, breast cancer MCF-7 and fibroblast 3T3. Confocal microscopy images demonstrate that PAAm-coordinated UCNPs can enhance the cellular uptake and endocytosis, whereas AEP- and PAA-coordinated UCNPs show a very low level of nonspecific adsorption. Biocompatibility studies based on 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide(MTT) assay, however, indicate that PAAm-coordinated UCNPs are more toxic than the other two, and thus need further modifiaction(like PEG coordinating) to improve their biocompatibility. These results are important to the knowledge base required for the biomedical application of the UCNPs.     

Luminescent Ink Based on Upconversion of NaYF4:Er,Yb@MA Nanoparticles: Environmental Friendly Synthesis and Structural and Spectroscopic Assessment

NaYF₄:Er,Yb upconversion luminescent nanoparticles (UCNPs) were prepared by hydrothermal methods at 180 °C for 24 h. The X-ray diffraction (XRD) and TEM (transmission electron microscopy) images show that the resulting 60 nm UCNPs possess a hexagonal structure. In this work, maleic anhydride (MA) was grafted on the surface of UCNPs to induce hydrophilic properties. The photoluminescence spectra (PL) show upconversion emissions centered around 545 nm and 660 nm under excitation at 980 nm. The luminescent inks, including UCNPs@MA, polyvinyl alcohol (PVA), deionized water (DI), and ethylene glycol (EG), exhibit suitable properties for screen printing, such as high stability, emission intensity, and tunable dynamic viscosity. The printed patterns with a height of 5 mm and a width of 1.5 mm were clearly observed under the irradiation of a 980 nm laser. Our strategy provides a new route for the controlled synthesis of hydrophilic UCNPs, and shows that the UCNPs@MAs have great potential in applications of anti-counterfeiting packing.     

表面羧基化Fe3O4磁性纳米粒子的快捷制备及表征

亲水性磁性纳米颗粒在生物科学领域有着广泛应用,本研究提出了一种快速对磁性纳米粒子表面进行羧基化的方法. 首先使用氯化铁和氯化亚铁为原料, 以油酸为表面活性剂, 通过共沉淀法制得油酸包覆的亲油性磁性纳米粒子, 然后用高锰酸钾进行原位氧化, 将覆盖在粒子表面的油酸中的C＝C键氧化成-COOH, 从而得到单层羧基功能化的亲水性磁性纳米粒子. 利用透射电镜(TEM)、X射线衍射(XRD)、傅利叶红外光谱仪(FT-IR)、热重分析仪(TGA)、振动样品磁强计(VSM)、Zeta电位分析仪等对其进行表征. 结果表明磁性纳米粒子表面被成功羧基化,粒子的平均直径约为9 nm,饱和磁化值为64.5 emu/g,剩磁和矫顽力近似为零,具有典型的超顺磁性. 羧基化磁性纳米粒子可在pH7-10的水溶液中形成稳定分散的磁流体,保存6周无沉淀出现.     

A Long-term and Stable Surface Modification Method for Lanthanide Doped Upconversion Nanoparticles by Oxidized Alginate

Lanthanide doped upconversion luminescent nanoparticles (UCNPs) have drawn widely attention in biomedical research. The generally synthesized oleate capped UCNPs have no aqueous dispersibility so that surface modification is required to be water dispersible. Herein, we developed an easy-going but effective approach to prepare hydrophilic UCNPs based on oxidized alginate molecule (OAlg). After surface modification treatment, the OAlg modified UCNPs (UCNPs-OAlg) shows excellent dispersibility and longer stability in aqueous solution even after 180 days. After incubation with UCNPs-OAlg, the upconversion luminescent images of living Hela cells were clearly obtained. It indicated that oxidized alginate modified UCNPs can be candidate for excellent imaging probes in future.     

Understanding mercapto ligand exchange on the surface of FePt nanoparticles

Tailoring the surface of nanoparticles is essential for biological applications of magnetic nanoparticles. FePt nanoparticles are interesting candidates owing to their high magnetic moment. Established procedures to make FePt nanoparticles use oleic acid and oleylamine as the surfactants, which make them dispersed in nonpolar solvents such as hexane. As a model study to demonstrate the modification of the surface chemistry, stable aqueous dispersions of FePt nanoparticles were synthesized after ligand exchange with mercaptoalkanoic acids. This report focuses on understanding the surface chemistry of FePt upon ligand exchange with mercapto compounds by conducting X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) studies. It was found that the mercapto end displaces oleylamine on the Pt atoms and the carboxylic acid end displaces the oleic acid on the Fe atoms, thus exposing carboxylate and thiolate groups on the surface that provide the necessary electrostatic repulsion to form stable aqueous dispersions of FePt nanoparticles.     

具有协同表面配体的水溶性稀土上转换发光纳米材料用于活体淋巴结显像

通过水热法,以油酸和两亲性聚乙烯吡咯烷酮(PVP)为协同表面配体,一步水热合成水溶性稀土上转换发光纳米材料(NaYF4:20％ Yb 1％ Tm).稀土纳米粒径尺寸平均为16 nm,在水溶液中稳定单分散,具有较强上转换发光.具有较低的细胞毒性,可用于上转换发光细胞成像.并进一步用于活体淋巴结显像,表现出高的信噪比.     

Enhanced red emission from GdF3:Yb3+,Er3+ upconversion nanocrystals by Li+ doping and their application for bioimaging

Under 980?nm near-infrared (NIR) excitation, upconversion luminescent (UCL) emission of GdF(3):Yb,Er upconversion nanoparticles (UCNPs) synthesized by a simple and green hydrothermal process can be tuned from yellow to red by varying the concentration of dopant Li(+) ions. A possible mechanism for enhanced red upconverted radiation is proposed. A layer of silica was coated onto the surface of GdF(3):Yb,Er,Li UCNPs to improve their biocompatibility. The silica-coated GdF(3):Yb,Er,Li UCNPs show great advantages in cell labeling and in vivo optical imaging. Moreover, GdF(3) UCNPs also exhibited a positive contrast effect in T(1)-weighted magnetic resonance imaging (MRI). These results suggest that the GdF(3) UCNPs could act as dual-modality biolabels for optical imaging and MRI.     

Engineered Upconversion Nanoparticles for Resolving Protein Interactions inside Living Cells

Upconversion nanoparticles (UCNPs) convert near‐infrared into visible light at much lower excitation densities than those used in classic two‐photon absorption microscopy. Here, we engineered <50 nm UCNPs for application as efficient lanthanide resonance energy transfer (LRET) donors inside living cells. By optimizing the dopant concentrations and the core–shell structure for higher excitation densities, we observed enhanced UCNP emission as well as strongly increased sensitized acceptor fluorescence. For the application of these UCNPs in complex biological environments, we developed a biocompatible surface coating functionalized with a nanobody recognizing green fluorescent protein (GFP). Thus, rapid and specific targeting to GFP‐tagged fusion proteins in the mitochondrial outer membrane and detection of protein interactions by LRET in living cells was achieved.     

Carboxylic‐Acid‐Passivated Metal Oxide Nanocrystals: Ligand Exchange Characteristics of a New Binding Motif

Ligand exchange is central in the processing of inorganic nanocrystals (NCs) and requires understanding of surface chemistry. Studying sterically stabilized HfO₂ and ZrO₂ NCs using ¹H solution NMR and IR spectroscopy as well as elemental analysis, this paper demonstrates the reversible exchange of initial oleic acid ligands for octylamine and self‐adsorption of oleic acid at NC surfaces. Both processes are incompatible with an X‐type binding motif of carboxylic acids as reported for sulfide and selenide NCs. We argue that this behavior stems from the dissociative adsorption of carboxylic acids at the oxide surface. Both proton and carboxylate moieties must be regarded as X‐type ligands yielding a combined X₂ binding motif that allows for self‐adsorption and exchange for L‐type ligands.     

Pattern generation of biological ligands on a biodegradable poly(glycolic acid) film

The micropatterns of biological ligands (biotin and RGD peptides) were generated on a flat surface of biodegradable polymer, poly(glycolic acid) (PGA). The immobilization of biological ligands onto the surface of biodegradable polymers (especially aliphatic polyesters) is usually hampered by the absence of functionalizable groups on the polymer backbone. We demonstrate herein that PGA polymer films were modified by surface hydrolysis to introduce carboxylic acid groups on the film surfaces, which were subsequently used for patterning amine-terminated ligands by microcontact printing. Fluorescence microscopy was used to verify the pattern of biotin on the surface of the PGA films after complexation with fluorescein-conjugated streptavidin. In addition, the cellular micropatterns were obtained from micropatterns of RGD peptides on the surface-hydrolyzed PGA films.     

Biocompatible NaYF4:Yb,Er upconversion nanoparticles: Colloidal stability and optical properties

Currently, highly luminescent colloidal upconversion nanoparticles (UCNPs) have expanded an increasing interest of researchers because of their facilitating lability in the biomedical/clinical field. In this study, NaYF₄:Yb,Er UCNPs are prepared by eco-friendly metal complexation-based thermal decomposition method at a lower temperature in aqueous media. The phase structure, crystallinity, phase purity, morphology, colloidal dispersibility, surface structure, surface charge, and optical and luminescent properties were evaluated carefully by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), energy dispersive x-ray analysis (EDX), Thermogravimetric analysis (TGA), zeta potential, Fourier transform infrared (FTIR), UV/visible and photoluminescent spectroscopic techniques. XRD pattern shows a pure single-phase cubic structure with an average grain size of 30–35 nm. TEM and SEM micrographs exhibited irregularly shaped spherical morphologies, porous surface structures highly aggregated UCNPs with the narrow-size distribution. Positive zeta potential has shown value signifying high absorption in the visible region which indicates particle's good colloidal stability in aqueous media. Under NIR-laser light excitation, the UCNPs emit strong UC emission transitions in the visible region. A broad infrared absorption peak of hydroxyl groups (–OH) in FTIR spectrum and mass loss at a lower temperature in TGA verified the surface functionality of UCNPs, with high colloidal stability, and excellent biocompatibility in aqueous media. In terms of their surface characteristics and high luminescent properties, the NaYF₄:Yb,Er UCNPs could be interestingly applied in tagging of biomolecules, drug delivery, proteins labeling, and therapeutic and thermostats applications.     

A novel derivatization reagent possessing a bromoquinolinium structure for biological carboxylic acids in HPLC‐ESI‐MS/MS

A novel bromoquinolinium reagent, i.e. 1‐(3‐aminopropyl)‐3‐bromoquinolinium bromide (APBQ), was synthesized for the analysis of carboxylic acids. A simple and practical precolumn derivatization procedure using the APBQ in RP chromatography and MS (HPLC‐MS) has been developed using bile acids and free fatty acids, as the representative carboxylic acids in biological samples. The APBQ efficiently reacted with carboxylic acids at 60°C for 60 min in the presence of N,N‐dicyclohexylcarbodiimide and pyridine as the activation reagents. Because the APBQ possesses a bromine atom in the structure, the identification of a series of carboxylic acids was easily achieved due to the characteristic bromine isotope pattern in the mass spectra. The APBQ also has a quaternary amine structure, thus the positively charged derivatives are predominate for the highly sensitive detection of carboxylic acids. The APBQ was successfully applied to the selective determination of biological carboxylic acids in human plasma. The bile acids (chenodeoxycholic acid and deoxycholic acid) and several saturated (stearic acid and palmitic acid) and unsaturated free fatty acids (oleic acid and linoleic acid) were reasonably determined by HPLC‐MS under the proposed procedure. Based on the results of analyses of human plasma and saliva, the proposed procedure using APBQ seems to be applicable for the qualitative and quantitative analyses of a series of carboxylic acids in biological samples.     

核酸适配体功能化的稀土上转换纳米材料在生物检测中的应用

稀土上转换纳米材料可以吸收近红外光并发射出可见光或紫外光,在生物传感领域得到了广泛研究。核酸适配体能高特异性和高亲和性地与靶标物结合,被广泛应用于生物传感、疾病诊断等领域。将稀土上转换纳米材料与核酸适配体结合构建的检测体系,可实现对目标物灵敏、高选择性的检测。本文介绍了近几年核酸适配体功能化的稀土上转换纳米材料在生物小分子、蛋白质、核酸、病原微生物、细胞等方面的应用,并展望了其在分析检测领域的发展前景。     

Upconversion nanophosphors for use in bioimaging, therapy, drug delivery and bioassays

Upconversion nanoparticles (UCNPs) represent a new class of fluorophores. Both the excitation and (anti-Stokes) emission wavelengths are in the long wave part of the spectrum so that their luminescence can deeply penetrate tissues and cause low photodamage in biological samples. Their large anti-Stokes shifts, sharp emission bands, zero auto-fluorescence from biological samples and high photostability renders them an ideal kind of fluorescent labels for a variety of analytical formats, for bioimaging in cancer therapy. This review covers the basic mechanisms of up-conversion luminescence, the methods for the synthesis and surface modification of biocompatible UCNPs, and aspects of the in vivo delivery of UCNPs. More specifically, we discuss (a) recent progress regarding UCNPs for multimodal targeted tumor imaging, (b) UCNP-based methods of biological detection and sensing, (c) the use of UCNPs in drug delivery, (d) applications in photodynamic therapy, photothermal therapy and radiotherapy. Finally, we are addressing challenges and opportunities of this quickly emerging field. Contains 362 references.

Photoelectron spectroscopic investigations of chemical bonding in organically stabilized PbS nanocrystals

The surface structure of organically capped PbS nanocrystals using synchrotron radiation excited core-level photoelectron spectroscopy has been studied. The nanocrystallites prepared by methods of colloidal chemistry have average diameters of 3.1, 3.9, 4.6, and 7.6 nm with narrow size distributions and are stabilized either with oleic acid only or with a combination of trioctylphosphine and oleic acid as ligands. High resolution photoelectron spectroscopy measurements allowed the surface structure to be studied and in particular how the organic ligands bind to the surface of the PbS nanocrystals to be elucidated. The results indicate that the trioctylphosphine ligands passivate only the surface S sites while oleic acid ligands appear to bind mainly to Pb sites.     

Preparation of magnetite nanocrystals with surface reactive moieties by one-pot reaction

By one-pot reaction, biocompatible magnetite nanocrystals with surface reactive moieties were prepared through the thermal decomposition of Fe(acac)(3) in 2-pyrrolidone using alpha,omega-dicarboxyl-terminated poly(ethylene glycol) as surface capping molecule. The successful conjugation between the magnetite nanocrystals and 9-amino acridine on the one hand demonstrates the existence of free carboxylic groups from PEG binding on the particle surface, on the other hand may also lead to a new type of magneto-optical materials as well as magneto-drugs.     

Surface chemistry of colloidal PbSe nanocrystals

Solution nuclear magnetic resonance spectroscopy (NMR) is used to identify and quantify the organic capping of colloidal PbSe nanocrystals (Q-PbSe). We find that the capping consists primarily of tightly bound oleic acid ligands. Only a minor part of the ligand shell (0-5% with respect to the number of oleic acid ligands) is composed of tri- n-octylphosphine. As a result, tuning of the Q-PbSe size during synthesis is achieved by varying the oleic acid concentration. By combining the NMR results with inductively coupled plasma mass spectrometry, a complete Q-PbSe structural model of semiconductor core and organic ligands is constructed. The nanocrystals are nonstoichiometric, with a surface that is composed of lead atoms. The absence of surface selenium atoms is in accordance with an oleic acid ligand shell. NMR results on a Q-PbSe suspension, stored under ambient conditions, suggest that oxidation leads to the loss of oleic acid ligands and surface Pb atoms, forming dissolved lead oleate.     

稀土上转换发光材料标记抗体的制备及在免疫组化中的应用

采用微波辐射法合成了具有上转换发光特性的六方相纳米粒子NaGdF₄: Yb³⁺,Er³⁺(UCNPs), 其晶粒大小约为65 nm, 且粒子在980 nm的激发光下显示绿光(550 nm). 进一步在NaGdF₄: Yb³⁺,Er³⁺纳米晶的表面包覆了一层二氧化硅层, 进行氨基功能化后获得了表面共价结合氨基基团的粒径为70 nm的上转换发光纳米微球NaGdF₄: Yb³⁺,Er³⁺@SiO₂-NH₂(UCNPs@SiO₂-NH₂). 通过共价键将UCNPs@SiO₂-NH₂与多克隆抗体免疫球蛋白联接, 将标记后的多克隆抗体应用于传统的免疫组化检测子宫内膜腺细胞中基质金属蛋白酶组织抑制剂-4(TIMP-4)蛋白的表达. 结果表明, 微波合成的稀土上转换发光纳米材料形貌规则且粒径均一, 包覆硅壳后材料具有良好的分散性和水溶性, 荧光强度高且稳定, 在980 nm激发光下对生物组织无背景荧光, 可以很好地检测组织中蛋白质的表达.     

Surface-grafting of phosphates onto a polymer for potential biomimetic functionalization of biomaterials

In the human body, phosphate groups play important roles in signaling and the biological functions of proteins and peptides. Despite the importance of phosphate groups, polymer surfaces have not been directly grafted with phosphate groups by chemical reactions because the usual organic solvents used to graft phosphate groups can dissolve or swell polymers. We focused this study on grafting phosphate groups onto a poly(ethylene-co-acrylic acid) (PEAA) surface in an aqueous solution. O-phospho L-serine and O-phosphoethanolamine were grafted on PEAA surfaces to introduce phosphate groups by activating carboxylic acid groups of PEAA using N-hydroxysuccinimide (NHS) and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) in an aqueous environment. X-ray photoelectron spectroscopy (XPS) was used to elucidate the process by which surface grafting occurs and the process that the phosphate group is cleaved into a phosphate ion and a hydrolyzed molecule at high pH. It was found that under appropriate reaction conditions the phosphate groups could be successfully grafted on the polymer surfaces. The phosphate-grafted polymer surfaces showed lower water contact angles than the initial polymer surfaces likely due to their highly mobile and hydrophilic phosphate side groups. This work demonstrates a technique to successfully graft phosphate groups onto organic polymer surfaces in a biocompatible aqueous environment, which may open new avenues to functionalizing synthetic polymeric and natural macromolecule derived biomaterials.     

表面配体对CdSe量子点发光性质的影响

本文采用热注入法合成了以油胺/油酸为表面配体的、粒径均一的CdSe量子点(CdSe QDs)。调节表面配体交换中辛硫醇与CdSe QDs的比例,研究了表面配体对CdSe QDs光致发光及电致化学发光性质的影响,并提出了CdSe QDs的发光模型。结果表明,辛硫醇表面配体显著影响CdSe QDs的带边发射和深能级陷阱发射,因而导致CdSe QDs光致发光强度的显著降低,以及电致化学发光强度的增加。上述结果为进一步提高量子点的发光性能提供了依据。