Reactions of photogenerated fluorine atoms with contaminant molecules trapped in solid argon 5. EPR spectroscopy of FC<Subscript>60</Subscript> · radical in solid argon

Reactions of photogenerated fluorine atoms with C₆₀ fullerene molecules isolated in solid argon were studied by EPR spectroscopy in the temperature range from 15 to 25 K. Highly resolved anisotropic EPR spectrum of the FC₆₀ ^⋅ radical was obtained for the first time. The spectrum is characterized by low anisotropy of the g-tensor and by axially symmetric HFC tensor on ¹⁹F nuclei. The parameters of the HFC tensor for ¹⁹F magnetic nuclei were determined. The isotropic HFC constant A _iso equals 202.8 MHz and the anisotropic magnetic dipole-dipole interaction constant A _dip equals 51.8 MHz. Quantum chemical calculations of FC₆₀ ^⋅ radical showed that the PBE1/Λ22m method (PBE1 functional and the correlation triple-zeta basis sets augmented with polarization functions on inner atomic shells) provides good agreement between the theoretical magnetic parameters and experimental data. Specific features of the spin density distribution in the FC₆₀ ^⋅ radical are discussed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 424–428, March, 2007.     

Kinetics of radical formation and decay in photooxidation of 4-halophenols sensitized by 4-carboxybenzophenone in aqueous solutions

Kinetics of formation and recombination of radicals formed by quenching of the triplet state of 4-carboxybenzophenone (CB) with para-substituted phenol derivatives RC₆H₄OH (R = OMe, H, Cl, Br, I) in aqueous solutions was studied by nanosecond laser photolysis. At pH ≥ 5.4, quenching proceeds with high rate constants ((1–3)⋅10⁹ L mol⁻¹ s⁻¹) through electron transfer to form the radical anion CB^⋅− and radical cation RC₆H₄OH^⋅+. The latter is transformed into the phenoxyl radical within ≤10 ns. At pH ≤ 8, the CB^⋅− radical anion is protonated in a phosphate buffer with the rate constant increasing from 4⋅10⁶ to 15⋅10⁶ s⁻¹ with a decrease in the pH from 8 to 5.4. The yield of radicals decreases from 100 to 13% as the atomic weight of halogen in the RC₆H₄OH molecule increases due to an increase in the probability of recombination of the primary triplet radical pair in the solvent cage and partial intersystem crossing in an encounter complex (³CB, RC₆H₄OH). The effect of heavy atom is also observed in the kinetics of volume recombination of the radicals, the magnitude of effect corresponds to the acceleration of the primary recombination of the triplet radical pair. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1397–1402, June, 2005.     

Water Activity and Osmotic Coefficients in Solutions of Glycine,Glutamic Acid,Histidine and their Salts at 298.15 K and 310.15 K

From vapor pressure osmometry data, the activity of water, osmotic coefficients and mean ionic activity coefficients of glycine (m=0.006−3.2 mol⋅kg⁻¹), L-histidine (m=0.005−0.23 mol⋅kg⁻¹), L-histidine monohydrochloride (m=0.008−0.63 mol⋅kg⁻¹), glutamic acid (m=0.004−0.05 mol⋅kg⁻¹), sodium L-glutamate (m=0.007−0.6 mol⋅kg⁻¹), and calcium L-glutamate (m=0.008−0.6 mol⋅kg⁻¹) have been obtained in aqueous solutions at 298.15 and 310.15 K. The Pitzer equations and the mean spherical approximation (MSA) are used for theoretical modeling. The results are supplied as reference thermodynamic material for the characterization of more complex molecules such as proteins.     

Thermal Decomposition of Cu(II) Complexes with 2-Chloro- and 2,6-Dichlorobenzoic Acid and Imidazole

The reaction products of Cu(II) 2-chlorobenzoate and the imidazole (1), and of Cu(II) 2,6-dichlorobenzoate and the imidazole (2) formulated as CuL’₂⋅2imd⋅2H₂O and CuL”₂⋅2imd⋅2H₂O (L’=C₇H₄ClO₂ ⁻, L”=C₇H₃Cl₂O₂ ⁻, imd=imidazole), were prepared and characterized by means of spectroscopic measurements and thermochemical properties. The blue (1) and green (2) complexes were obtained as solids with a 1:2:2 molar ratio of metal to carboxylate ligand to imidazole. When heated at a heating rate of 10 K min⁻¹ the hydrated complexes, (1) and (2), lose some of the crystallization water molecules and then decompose to gaseous products. This revised version was published online in August 2006 with corrections to the Cover Date.     

Acyclic and cyclic forms of the radicals HO4? CH3O4? and C2H5O4·: ab initio quantum chemical calculations

Acyclic and cyclic structures and total energies of radicals HO₄⋅ CH₃O₄⋅ and C₂H₅O₄· were calculated by ab initio quantum chemical methods. Depending on the computational method and basis sets used, the cyclic conformer of the HO₄· radical is 4.8 to 7.3 kJ mol^-1 more stable than the acyclic one. For the first two representatives of the homologous series of alkyl tetraoxyl radicals, CH₃O₄· and C₂H₅O₄, MP2/6-311++G** calculations predict insignificant energy differences (1.2 kJ mol^-1) between six-membered cyclic and acyclic conformers. Apparently, these radicals can exist in both forms.     

Critical Evaluation of Protonation Constants. Literature Analysis and Experimental Potentiometric and Calorimetric Data for the Thermodynamics of Phthalate Protonation in Different Ionic Media

The protonation constants of phthalate were determined in aqueous NaCl (0.1 ≤ I ≤ 5,mol⋅L⁻¹) and in aqueous Me₄NCl (0.1 mol⋅L⁻¹ ≤ I ≤ 3,mol⋅L⁻¹) at t = 25,^∘C. Experimental data were employed in conjunction with literature data from studies in different ionic media (Et₄NI: 0 ≤ I ≤ 1,mol⋅L⁻¹; NaClO₄: 0.05 mol⋅L⁻¹ ≤ I ≤ 2,mol⋅L⁻¹)to study the dependence on ionic strength using different models, such as the SIT and Pitzer equations, and an Extended Debye-Hückel type equation. Experimental calorimetric data in NaCl and protonation constants at different temperatures in Et₄NI (5 ≤ t ≤ 45^∘C) and in NaClO₄ (15 ≤ t ≤ 35 ^∘C) were also used to study their dependence on temperature. Recommended equilibrium data are reported together with a short discussion of a prospective protocol for drawing these data.     

Equilibrium and kinetics study of Gd(III) and U(VI) adsorption from aqueous solutions by modified Sorrel’s cement

Modified Sorrel’s cement was prepared by the addition of ferric chloride. The modified cement (MF5) was analyzed and characterized by different methods. Adsorption of Gd(III) and U(VI) ions in carbonate solution has been studied separately as a function of pH, contact time, adsorbent weight, carbonate concentration, concentration of Gd(III) and U(VI) and temperature. From equilibrium data obtained, the values of Δ H, Δ S and Δ G were found to equal −30.9 kJ ⋅ mol⁻¹, −85.4 J ⋅ mol⁻¹ ⋅,K⁻¹, and −5.4 KJ ⋅ mol⁻¹, respectively, for Gd(III) and 18.9 kJ ⋅ mol⁻¹, 67.8 J ⋅ mol⁻¹ K⁻¹ and −1.3 KJ ⋅ mol⁻¹, respectively, for U(VI). The equilibrium data obtained have been found to fit both Langmuir and Freundlich adsorption isotherms. The batch kinetic of Gd(III) and U(VI) on modified Sorrel’s cement (MF5) with the thermodynamic parameters from carbonate solution were studied to explain the mechanistic aspects of the adsorption process. Several kinetic models were used to test the experimental rate data and to examine the controlling mechanism of the adsorption process. Various parameters such as effective diffusion coefficient and activation energy of activation were evaluated. The adsorption of Gd(III) and U(VI) on the MF5 adsorbent follows first-order reversible kinetics. The forward and backward constants for adsorption, k ₁and k ₂ have been calculated at different temperatures between 10 and 60^∘C. Form kinetic study, the values of Δ H ^* and Δ S ^* were calculated for Gd(III) and U(VI) at 25^∘C. It is found that Δ H ^* equals −14.8 kJmol⁻¹ and 7.2 kJmol⁻¹ for Gd(III) and U(VI), respectively, while Δ S ^* were found equal −95.7 Jmol⁻¹K⁻¹ and −70.5 Jmol⁻¹K⁻¹ for Gd(III) and U(VI), respectively. The study showed that the pore diffusion is the rate limiting for Gd(III) and (VI).     

Pulse radiolysis study of dithio-oxamide in aqueous solutions

The reactions of e⁻ _aq, H-atoms, OH radicals and some one electron oxidants and reductants were studied with dithio-oxamide (DTO) in aqueous solutions using pulse radiolysis technique. The transient species formed by the reaction of e⁻ _aq with DTO at pH 6.8 has an absorption band with λ _max at 380 nm and is reducing in nature. H-atom reaction with DTO at pH 6.8 also produced the same transient species. The semi-reduced species was found to be neutral indicating that the electron adduct gets protonated quickly. However at pH 1, the species produced by H-atom reaction had a different spectrum with λ _max at 360 and 520 nm. Reaction of acetone ketyl radicals and CO₂ ⁻ radicals with DTO at pH 6.8 gave transient spectra which were identical to that obtained by e⁻ _aq reaction. However at pH 1, the spectrum obtained by the reaction of acetone ketyl radicals with DTO was similar to that obtained by H-atom reaction at that pH. The transient species formed by OH radical reaction with DTO in the pH range 1–9.2 also has two absorption maxima at 360 and 520 nm. This spectrum was identical with the spectrum obtained by H-atom reaction at pH 1. This means that all these radicals viz. OH, H-atom and (CH₃)₂COH radicals react with DTO at pH 1 by H-abstraction mechanism. The transient species produced was found to be sensitive to the presence of oxygen. One-electron oxidizing radicals such as Br₂ ^−· and SO₄ ^−· radicals reacted with DTO at neutral pH to give the same species as produced by OH radical reaction having absorption maxima at 360 to 520 nm. At acidic pHs, only Br₂ ^−· and Cl₂ ^−· radicals were able to oxidize DTO to give the same species as produced by OH radical reaction. The semioxidized species is a resonance stabilized species with the electron delocalized over the-N-C-S bond. This species was found to be neutral and non-oxidizing in nature.     

Enthalpies of the formation of aliphatic carbonyl-containing radicals

A collection of data on enthalpies of the formation(Δ_f H ^o) of aliphatic carbonyl-containing radicals is analyzed and expanded. The Δ_f H ^o values for 29 carbonyl-containing radicals are determined for the first time, and are strongly revised for 17 carbonyl-containing radicals using the literature data on the dissociation energies of the bonds in molecules. The data is analyzed on the basis of the structureproperty (enthalpy of formation) relation within the additive-group approach, with the determination and specification of the parameters. It is concluded that the Δ_f H ^o values of carbonyl-containing radicals calculated from the obtained parameters (a total of 96 compounds was considered) agree well with the experimental data.     

Oxidation of Fursemide by Diperiodatocuprate(III) in Aqueous Alkaline Medium—a Kinetic Study

Fursemide is the chemical compound 4-chloro-2-(furan-2-ylmethylamino)-5-(aminosulfonyl) benzoic acid. It was oxidized by diperiodatocuprate(III) in alkali solutions, and the oxidation products were identified as furfuraldehyde and 2-amino-4-chloro-5-(aminosulfonyl) benzoic acid. The reaction kinetics were studied spectrophotometrically. The reaction was observed to be first order in [oxidant] and fractional order each in [fursemide] and [periodate], whereas added alkali retarded the rate of reaction. The reactive form of the oxidant was inferred to be [Cu(H₃IO₆)₂]⁻. A mechanism consistent with the experimental results was proposed, in which oxidant interacts with the substrate to give a complex as a pre-equilibrium state. This complex decomposed in a slow step to give a free radical that was further oxidized by reaction with another molecule of DPC to yield 2-amino-4-chloro-5-(aminosulfonyl) benzoic acid and furfuraldehyde in a fast step. This reaction was studied at 25, 30, 35, 40 and 45 °C, and the activation parameters E _a,ΔH ^#,ΔS ^# and ΔG ^# were determined to be 51 kJ⋅mol⁻¹,48.5 kJ⋅mol⁻¹,−63.5 J⋅K⁻¹⋅mol⁻¹ and 67 kJ⋅mol⁻¹, respectively. The value of log ₁₀ A was calculated to be 6.8.     

Buffer Standards for pH Measurement of N-(2-Hydroxyethyl)piperazine-N′-2-ethanesulfonic Acid (HEPES) for I=0.16 mol⋅kg−1 from 5 to 55 °C

The values of the second dissociation constant, pK ₂, of N-(2-hydroxyethyl) piperazine-N′-2-ethanesulfonic acid (HEPES) have been reported at twelve temperatures over the temperature range 5 to 55 °C, including 37 °C. This paper reports the results for the pa _H of eight isotonic saline buffer solutions with an I=0.16 mol⋅kg⁻¹ including compositions: (a) HEPES (0.01 mol⋅kg⁻¹) + NaHEPES (0.01 mol⋅kg⁻¹) + NaCl (0.15 mol⋅kg⁻¹); (b) HEPES (0.02 mol⋅kg⁻¹) + NaHEPES (0.02 mol⋅kg⁻¹) + NaCl (0.14 mol⋅kg⁻¹); (c) HEPES (0.03 mol⋅kg⁻¹) + NaHEPES (0.03 mol⋅kg⁻¹) + NaCl (0.13 mol⋅kg⁻¹); (d) HEPES (0.04 mol⋅kg⁻¹) + NaHEPES (0.04 mol⋅kg⁻¹) + NaCl (0.12 mol⋅kg⁻¹); (e) HEPES (0.05 mol⋅kg⁻¹) + NaHEPES (0.05 mol⋅kg⁻¹) + NaCl (0.11 mol⋅kg⁻¹); (f) HEPES (0.06 mol⋅kg⁻¹) + NaHEPES (0.06 mol⋅kg⁻¹) + NaCl (0.10 mol⋅kg⁻¹); (g) HEPES (0.07 mol⋅kg⁻¹) + NaHEPES (0.07 mol⋅kg⁻¹) + NaCl (0.09 mol⋅kg⁻¹); and (h) HEPES (0.08 mol⋅kg⁻¹) + NaHEPES (0.08 mol⋅kg⁻¹) + NaCl (0.08 mol⋅kg⁻¹). Conventional pa _H values, for all eight buffer solutions from 5 to 55 °C, have been calculated. The operational pH values with liquid junction corrections, at 25 and 37 °C have been determined based on the NBS/NIST standard between the physiological phosphate standard and four buffer solutions. These are recommended as pH standards for physiological fluids in the range of pH = 7.3 to 7.5 at I=0.16 mol⋅kg⁻¹.     

Buffer Standards for the Physiological pH of the Zwitterionic Compound, TAPS, From 5 to 55 ∘C

The values of the second dissociation constant, pK ₂, and related thermodynamic quantities of N-[tris(hydroxymethyl)methyl-3-amino]propanesulfonic acid (TAPS) have already been reported at 12 temperatures over the temperature range 5–55 ^∘C, including 37 ^∘C. This paper reports the results for the pH of five equimolal buffer solutions with compositions: (a) TAPS (0.03 mol⋅kg⁻¹) + NaTAPS (0.03 mol⋅kg⁻¹); (b) TAPS (0.04 mol⋅ kg⁻¹) + NaTAPS (0.04 mol⋅kg⁻¹); (c) TAPS (0.05 mol⋅kg⁻¹) + NaTAPS (0.05 mol⋅kg⁻¹); (d) TAPS (0.06 mol⋅kg⁻¹) + NaTAPS (0.06 mol⋅kg⁻¹); and (d) TAPS (0.08 mol⋅kg⁻¹) + NaTAPS (0.08 mol⋅kg⁻¹). The remaining eight buffer solutions consist of saline media of the ionic strength I = 0.16 mol⋅kg⁻¹, matching closely to that of the physiological sample. The compositions are: (f) TAPS (0.04 mol-kg⁻¹) + NaTAPS (0.02 mol-kg⁻¹) + NaCl (0.14 mol⋅kg⁻¹); (g) TAPS (0.05 mol⋅kg⁻¹) + NaTAPS (0.04 mol⋅kg⁻¹) + NaCl (0.12 mol⋅kg⁻¹); (h) TAPS (0.6 mol⋅kg⁻¹) + NaTAPS (0.04 mol⋅kg⁻¹) + NaCl (0.12 mol⋅kg⁻¹); (i) TAPS (0.08 mol⋅kg⁻¹) + NaTAPS (0.06 mol⋅kg⁻¹) + NaCl (0.10 mol⋅kg⁻¹); (j) TAPS (0.04 mol⋅ kg⁻¹) + NaTAPS (0.04 mol⋅kg⁻¹) + NaCl (0.12 mol⋅kg⁻¹); (k) TAPS (0.05 mol⋅kg⁻¹) + NaTAPS (0.05 mol⋅kg⁻¹) + NaCl (0.11 mol⋅kg⁻¹); (l) TAPS (0.06 mol⋅kg⁻¹) + NaTAPS (0.06 mol⋅kg⁻¹) + NaCl (0.10 mol⋅kg⁻¹); and (m) TAPS (0.08 mol⋅kg⁻¹) + NaTAPS (0.08 mol⋅kg⁻¹) + NaCl (0.08 mol⋅kg⁻¹). These buffers are recommended as a pH standard for clinical measurements in the range of physiological application. Conventional pH values, designated as pH(s), for all 13 buffer solutions from 5 to 55 ^∘C have been calculated. The operational pH values with liquid junction corrections, at 25 and 37 ^∘C for buffer solutions, designated above as (b), (c), (d), (e), (j), (l), and (m); have been determined based on the difference in the values of the liquid junction potentials between the accepted phosphate standard and the buffer solutions under investigation.     

Using ESR spectroscopy to study radical intermediates in proton-exchange membranes exposed to oxygen radicals

Direct ESR and spin-trapping experiments were used to study the behavior of Nafion, a perfluorinated ionomer membrane used in fuel cells, when exposed in the laboratory to oxygen radicals produced by Fenton and photo-Fenton reactions. DMPO (5,5-dimethyl-1-pyroline) was used as the spin trap. The results suggest that the two ESR methods provide complementary information on Nafion fragmentation. The presence of membrane-derived fragments was suggested indirectly by the presence of a broad signal (line width ≈ 84 G) after prolonged exposure of the membrane to the Fenton reagent based on Ti(III), and by the DMPO adduct of a carbon-centered radical in the spin-trapping experiments. The most convincing proof for the presence of perfluorinated radicals was obtained in Nafion membranes partially neutralized by Cu(II), Fe(II) and Fe(III) upon exposure to UV-irradiation in the presence or absence of H₂O₂ (photo-Fenton treatment). Identification of the chain-end radical RCF₂CF ₂ ^• with magnetic parameters different to those determined for the chain-end detected in γ-irradiated Teflon, was taken as evidence for the attack of reactive oxygen radicals on the side-chain of the membrane. Additional support for this suggestion was the detection of the “quartet” ESR signal assigned to the CF₃C^•O radical, and of the “quintet” ESR signal assigned to the radical centered at the intersection of the main and side chains. The limitations and advantages of each approach are discussed.     

Astemizole/Cyclodextrin Inclusion Complexes: Phase Solubility, Physicochemical Characterization and Molecular Modeling Studies

Guest–host interaction of astemizole (Astm) with cyclodextrins (CDs) has been investigated using phase solubility diagrams (PSD), differential scanning calorimetry (DSC), X-ray powder diffractometry (XRPD), proton nuclear magnetic resonance (¹H-NMR) and molecular mechanical modeling (MM⁺). Estimates of the complex formation constant, K ₁₁, show that the tendency of Astm to complex with CDs follows the order: β-CD>HP-β-CD>γ-CD, α-CD. 1:1 Astm/β-CD complex formation at pH=5.0 was largely driven by the hydrophobic effect (desolvation), which was quantitatively estimated at −16.5 kJ⋅mol⁻¹, whereas specific interactions contribute only −5.3 kJ⋅mol⁻¹ to 1:1 complex stability (ΔG ₁₁^o=−22.7 kJ⋅mol⁻¹). The percentage contributions of the hydrophobic effect and specific interactions were therefore 73 and 27%, respectively. Both enthalpic and entropic factors contribute equally well (−11 kJ⋅mol⁻¹ each) to 1:1 Astm/β-CD complex stability. ¹H-NMR and MM⁺ molecular modeling studies indicate the formation of different isomeric 1:1 and 1:2 complexes. The dominant driving force for complexation is evidently van der Waals with very little electrostatic contribution. PSD, ¹H-NMR, DSC, XRPD and MM⁺ studies proved the formation of inclusion complexes in solution and the solid state.     

The reactivity of ketyl and alkyl radicals in reactions with carbonyl compounds

A parabolic model of bimolecular radical reactions was used for analysis of the hydrogen transfer reactions of ketyl radicals: >C·OH+R¹COR²→>C=O+R¹R²C·OH. The parameters describing the reactivity of the reagents were calculated from the experimental data. The parameters that characterize the reactions of ketyl and alkyl radicals as hydrogen donors with olefins and with carbonyl compounds were obtained: >C·OH+R¹CH=CH₂→>C=O+R¹C·HCH₃; >R¹CH=CH₂+R²C·HCH₂R³→R²C·HCH₃+R²CH=CHR³. These parameters were used to calculate the activation energies of these transformations. The kinetic parameters of reactions of hydrogen abstraction by free radicals and molecules (adelhydes, ketones, and quinones) from the C−H and O−H bonds were compared. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2178–2184, November, 1998.     

Complexation and Precipitation of Arsenate and Iron Species in Sodium Perchlorate Solutions at 25∘C

The complexation of As(V) in aqueous solutions in the presence of iron(III) was investigated spectrophotometrically with both variable and constant ionic strengths. The determined thermodynamic and stoichiometric formation constants of the FeHAsO₄⁺ species are log₁₀^∘β = 9.21± 0.01 and log₁₀^Iβ (1.0mol⋅dm⁻³ NaClO₄) = 7.78 ± 0.01, respectively. The numerical treatment of the obtained spectral data was performed with the SPECA program. The analysis required the consideration of the hydrolysis of Fe(III) and the protonation of As(V) in the pH range studied. No significant hydrolysis was observed because of the low pH values (pH < 2.5) involved. The stabilities of the solid Fe(III) arsenates was established by solubility experiments. All of the solubility experiments were performed in aqueous NaClO₄ solutions at constant ionic strength (1.0mol⋅dm⁻³) and at 25^∘C. The experimental data were consistent with FeAsO₄⋅2H₂O being the solid phase (log₁₀ ^∘ K_so = −24.30± 0.08). The corresponding thermodynamic constants were computed by means of the Modified Bromley's Methodology (MBM) that describes the variation of the activity coefficients of all of the ions involved in the complexation and precipitation equilibria with the medium and ionic strength. Finally, the solid phase obtained in this work was also characterized by FT-IR and FT-Raman spectroscopies, and the hydration of the solid iron arsenate was confirmed by X-ray diffraction data.     

Thermodynamic Protonation Parameters of some Sulfur-Containing Anions in NaCl<Subscript>aq</Subscript> and (CH<Subscript>3</Subscript>)<Subscript>4</Subscript>NCl<Subscript>aq</Subscript> at <Emphasis Type="Italic">t</Emphasis>=25 °C

Protonation constants of one thiocarboxylate (thioacetate) and four sulfur-containing carboxylates (2-methylthioacetate, thiolactate, thiomalate, 3-mercaptopropionate) were determined by potentiometric measurements in a wide ionic strength range [0≤I≤5 mol⋅L⁻¹ in NaCl and 0 ≤I≤3 mol⋅L⁻¹ in (CH₃)₄NCl] at t=25 °C. For two of these ligands (2-methylthioacetate and thiolactate), the protonation enthalpies were also determined by calorimetric measurements in NaCl ionic medium [0 ≤I≤5 mol⋅L⁻¹] at t=25 °C. Individual UV spectra of the protonated and unprotonated 3-mercaptopropionate species, together with values of the protonation constants, were obtained by spectrophotometric titrations. Results were analyzed in terms of their dependence on the ionic medium by using different thermodynamic models [Debye-Hückel type, SIT (Specific ion Interaction Theory) and Pitzer’s equations]. Differences among protonation constants obtained in different media were also interpreted in terms of weak complex formation.     

Adsorption properties of BEA zeolites and their aluminum phosphate extrudates for purification of isomaltose

The disaccharide isomaltose is produced via an enzymatic reaction and is adsorbed to BEA zeolite. This reaction integrated adsorption can be achieved as fluidized bed as well as fixed bed. We investigated isotherms, adsorption enthalpies and sorption kinetics of BEA zeolite and extrudates with a novel aluminum phosphate sintermatrix. These extrudates contain 50% (w/w) of BEA 150 zeolites (Si/Al = 75) as primary crystals. BET-surface for extrudates is 245 m²⋅g⁻¹ and 487 m²⋅g⁻¹ for zeolite. Extrudates show a monomodal macropore structure with a maximum at 90 nm. All isotherms show a type I shape. For lower equilibrium concentrations, which occur during the enzymatic reaction, Henry’s law is applied and compared to a Langmuir model. Adsorption equilibrium constant K _i,L calculated from Langmuir for extrudates at 4 °C is 64.7 mL⋅g⁻¹ and more than twice as high as obtained from Henry’s law with K _i is 26.8 mL⋅g⁻¹. Adsorption on extrudates at 4 °C is much stronger than on zeolite crystals where the Henry coefficient K _i is 17.1 mL⋅g⁻¹. Adsorption enthalpy Δh _Ad calculated from van’t Hoff plot with the Henry equation is −44.3 kJ⋅mol⁻¹ for extrudates and −29.6 kJ⋅mol⁻¹ for zeolite crystals. Finally, the kinetics for ad- and desorption were calculated from the initial slope. The diffusion rate for ad- and desorption on extrudates were in the same range while adsorption on zeolites is three orders of magnitudes faster than desorption.     

Electron paramagnetic resonance (EPR) study of γ-radiation-induced radicals in 1,3,5-trithiane and its derivatives

Radicals formed in γ-irradiated 1,3,5-trithiane (TT) and its three derivatives, α- and β-2,4,6-trimethyl-1,3,5-trithiane (α-TMT and β-TMT), and 2,4,6-trimethyl-2,4,6-triphenyl-1,3,5-trithiane (TMTPT), were studied by the electron paramagnetic resonance (EPR) method in the solid state. The sulfur radical cations (>S^+•) were identified in all compounds at 77 K. In TT and its two derivatives, α-TMT and β-TMT, the >S^+• decay via deprotonation-forming C-centered radicals. Further increase of temperature up to 293 K results in the appearance of thiyl-type radicals (RS^•). In TMTPT, the >S^+• are stable up to 250 K. They formed the intermolecularly three-electron-bonded dimeric radical cations (S∴S)⁺ while RS^• radicals were not observed. Some of the radical assignments and their EPR parameters (g and a hyperfine splittings) obtained support from the DFT calculations.     

Antioxidant properties of gold nanoparticles studied by ESR spectroscopy

The Au-containing nanocomposites were synthesized by UV irradiation followed by the thermal treatment of chitosan oligomer solutions doped by HAuCl₄. The size of the formed gold nanoparticles depends on the concentration of the dopant, which is proved by UV—Vis absorption spectroscopy and small-angle X-ray scattering (SAXS). The antioxidant activity of the gold nanoparticles with respect to hydroxy radicals significantly depends on the specific surface of the particles, which was found using the secondary radical spin-trapping technique. The change in the ^·OH radical concentration was monitored by the intensity of the ESR signal of the adduct of the spin trap (α-phenyl-N-tert-butylnitrone) with the Me^·radicals formed in the reaction of ^·OH with DMSO. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 509–512, March, 2008.