Liquid chromatographic method with fluorescence detection for the determination of polycyclic aromatic hydrocarbons in environmental samples

A method for the determination of some polynuclear aromatic hydrocarbons (PAHs) in water samples and air filters is presented. Samples were extracted with light petroleum-diethyl ether (85 + 15) and the extracts were concentrated before analysis. Reversed-phase liquid chromatography with fluorescence detection was applied to separate and determine the PAHs. Recoveries of individual PAHs from spiked water samples were 0.16–0.27 ng ml^?1. Detection limits in the picogram range were obtained for each compound.     

Characterization of polycyclic aromatic hydrocarbons in environmental samples by selective fluorescence quenching

Selective fluorescence quenching is used to profile polycyclic aromatic hydrocarbons (PAHs) in samples of environmental origin. After separation by high-efficiency capillary liquid chromatography, the PAHs are detected by laser-induced fluorescence spectroscopy. Nitromethane is added to selectively quench the fluorescence of alternant PAHs, whereas diisopropylamine is added to quench nonalternant PAHs. The chromatograms in the absence and presence of fluorescence quenching are evaluated by means of the product moment correlation method to quantify the statistical similarities and differences. This method is demonstrated by application to three samples: a standard mixture of 16 priority pollutants, a coal-derived fluid, and a contaminated soil. The correlation coefficients (r) are typically 0.99 or higher for samples that are identical in origin, 0.90-0.50 for closely related samples, and less than 0.50 for samples that are distinctly unrelated. This method can be used to confirm with high statistical confidence the cause or source of an event with environmental impact, such as an oil leak or spill, contamination or waste by-products from petroleum fuel production and processing, etc.     

Multivariate optimization of a GC-MS method for determination of sixteen priority polycyclic aromatic hydrocarbons in environmental samples

This paper describes the development and optimization, by using multivariate analysis, of a GC-MS-SIM method for evaluation of the 16 polyaromatic hydrocarbons considered as priority pollutants in atmospheric particulate material by the US EPA. In order to assure an adequate separation in the shortest analysis time, a multivariate design was used to set the conditions of the oven temperature program. The optimization process was carried out using factorial fractional design and Box-Behnken design. The following factors were evaluated: initial temperature, temperature rate #1, intermediary temperature, temperature rate #2, and final temperature. The optimized conditions were set at: 70 degrees C (2 min) --> 200 degrees C (30 degrees C/min, 5 min) --> 300 degrees C (5 degrees C/min, 1.67 min). Moreover, we have also optimized the injector temperature as 310 degrees C and sampling time as 0.8 min. The total analysis time was 33 min. Validation of GC-MS-SIM yielded satisfactory results for repetitivity of the detector response and retention times, and linearity of calibration curves. LOD were established as 0.13-0.34 ng/mL (peak area) and 0.18-0.72 ng/mL (peak height). The method has been shown to be appropriate for the analysis of samples of atmospheric particulate material and/or other environmental matrices.     

Simplified determination of polycyclic aromatic hydrocarbons

Accurate quantitative analysis for selected polycyclic aromatic hydrocarbons present on urban dust can be obtained by using a simple procedure consisting of sonic-probe extraction with cyclohexane; clean-up with Florisil((R))-XAD-4((R)), and measurement by high-resolution gas chromatography with flame-ionization detection (HRGC/FID). The analysis can be further simplified by eliminating the clean-up step if HRGC/electron-impact mass-spectrometry (MS) is available. Both the FID and MS methods give results consistent with those obtained by standard procedures. The direct HRGC/MS procedure, combined with chemical ionization, can also be applied to the determination of polycyclic organic materials present in solvent-refined coal, shale oil and crude oil.     

Rapid determination of polycyclic aromatic hydrocarbons in tea infusion samples by high-performance liquid chromatography and fluorimetric detection based on solid-phase extraction

This paper describes a method for the determination of PAHs in black, green and decaffeinated tea infusion samples. The method is based on the solid phase extraction of the PAHs using Sep-Pak vac tC-18 cartridges. The PAHs are then eluted from the cartridges with dichloromethane. Quantification and detection are carried out by HPLC with a fluorimetric detector using a program of excitation and emission wavelength pairs. Recoveries at concentration levels in the range 190-1790 ng l-1 were higher than 65% for all PAHs except dibenz[a,h]anthracene, for which it was around 54%. The mean content of PAHs was in the range 28.7-112 ng l-1 in the tea infusions, with relative standard deviations between 2 and 18% (n = 4).     

Determination of polycyclic aromatic hydrocarbons in limpet samples

Summary An HPLC method with UV and programmed fluorescence detection has been optimized and used to evaluate the levels of contamination of PAHs in lightly contaminated biota samples. A specific stationary phase was used that offers high selectivity for PAH separation. The proposed method was applied to limpet samples from Fuerteventura (Canary Island) with good results.     

Application of partial least-squares calibration to phosphorimetric data for determination of polycyclic aromatic hydrocarbons in spiked environmental samples

A partial least-squares calibration method is proposed, for the first time, for phosphorescence signals. The proposed method is based on the determination of phenanthrene, fluoranthene, and benz[a]anthracene by room temperature phosphorimetry, using microemulsion solutions. The emission and first-derivative emission spectra of the ternary mixtures were tested to perform the calibration matrix. Improved recoveries were found for the prior differentiation step in the analysis of ternary mixtures of these polycyclic aromatic hydrocarbons in road dust samples. The proposed method yielded recoveries ranging from 93.2 to 115.3%, with relative standard deviations of < 6.8%.     

Headspace single drop microextraction combined with HPLC for the determination of trace polycyclic aromatic hydrocarbons in environmental samples

A new method by combining headspace single drop microextraction (HS-SDME) with HPLC fluorescence detection for the determination of trace polycyclic aromatic hydrocarbons (PAHs) in environmental samples was developed. Aqueous solution of saturated beta-cyclodextrin was used as extraction solvent and five PAHs were employed as target analytes. The factors affecting the extraction efficiency were studied in detail and the optimal extraction conditions were established. Beta-cyclodextrin was found to play two important roles, one is the improvement of extraction efficiency of target analytes and the other is the enhancement of their fluorescence intensities in HPLC fluorescence detection. The detection limits for the target analytes were found to be in the range of 0.004-0.247ng/ml and the relative standard deviations (R.S.D.s) of 5.1-7.1% were obtained. The proposed method was applied to the analysis of trace PAHs in environmental samples with satisfactory results.     

The spectrophotometric determination of polycyclic aromatic hydrocarbons

The determination of polycyclic aromatic hydrocarbons by elution chromatography from alumina columns followed by ultra-violet spectrophotometry has been elaborated for a more extended range of substances than has been published previously. The methods have been standardised and tables of absorption peaks are provided for easy identification of a number of compounds commonly found as traces in combustion products. Recommendations are given for the preparation of samples for determinations by this method, which has been successfully employed for the analysis of carbon blacks, soots, urban air solids, condensible smokes such as tobacco smoke, wood smoke and coal tar. thermal decomposition or pyrolysis products and other substances, such as urban vegetation, soil, tobacco, snuff, smoked food, and surface drainage water, which have been subjected to the action of smokes or other combustion products.     

Fast chromatographic determination of polycyclic aromatic hydrocarbons in aerosol samples from sugar cane burning

The influence of the pH on the complexation equilibria between (S)- or (R)-alprenolol and the cellulase Cel7A was investigated by isothermal titration calorimetry. The results obtained agree with those of previous, similar studies of the same equilibria in which the protein was immobilized on silica particles, packed in a chromatographic column. The association constant and the complexation enthalpy and entropy of the (S)-enantiomer increase with increasing pH. For (R)-alprenolol, the binding is endothermic at all pH values. Thus, for both enantiomers in the pH range 5.5-6.8, the binding is an entropically driven process.     

Relevance of polycyclic aromatic hydrocarbons as environmental carcinogens

Summary All emissions from incomplete combustion contain polycyclic aromatic hydrocarbons (PAH) which are a well-known class of carcinogens. The question whether additional carcinogenic compounds do exist in these emissions can be answered by separating the emission condensate into a PAH-containing and a PAH-free part. These parts have been tested in an animal experiment by means of a carcinogen-specific test system such as topical application onto the skin of mice or injection into the lung of rats. The investigation on the contribution of PAH-fractions and of benzo(a)pyrene to the carcinogenic potential of emission condensate from gasoline driven engines, Diesel engines, coal combustion in domestic furnaces and sidestream smoke of cigarettes shows that the carcinogenic effect of the particle phase of these pyrolytic condensates is predominantly caused by polycyclic aromatic compounds such as PAH. In all cases investigated the PAH-fraction containing 4 and more rings accounted for more than 75% of the total carcinogenic effect resulting from the implantation into the lung of rats or from the topical application onto mouse skin. The contribution of benzo(a)pyrene to the carcinogenic potency of various condensates, however, is minor in all cases investigated and accounts for only 0.17% to 4% of the total carcinogenicity as evaluated from implantation into the lung of rats (Table 1).     

Acid-induced cloud point extraction and preconcentration of polycyclic aromatic hydrocarbons from environmental solid samples

Liquid chromatography coupled to electrospray-mass spectrometry (LC-ES-MS) with positive ion detection was evaluated for the determination of tributyltin and triphenyltin in water samples using tripropyltin as internal standard. The separation was performed in the isocratic mode on a silica-based C18 column with a mobile phase containing 0.02% trifluoroacetic acid in acetonitrile-water (50:50, v/v). The optimum LC-ES-MS conditions were established and quantification was performed on the basis of the [M]+ ions. Limits of detection for standard solutions were 100 and 200 pg Sn injected for triphenyltin and tributyltin, respectively, and good reproducibility was observed. Solid-phase extraction was carried out on C18 cartridges to preconcentrate the analytes from natural water samples, with recoveries ranging from 80 to 110%. Limits of detection for SPE-LC-ES-MS were in the range of low ng l(-1), which demonstrates the suitability of the method for environmental samples.     

Selective enrichment procedures for the determination of polychlorinated biphenyls and polycyclic aromatic hydrocarbons in environmental samples by gel permeation chromatography

An improved two-step clean up procedure involving alumina-silica column chromatography and gel permeation chromatography (GPC) of air particulate matter (NBS SRM 1648) and river sediment extracts and a GPC clean up procedure for marine biota samples are described for the determination of polycyclic aromatic hydrocarbons with two to five rings and selected polychlorinated biphenyl congeners, respectively. Bio-Beads SX-12 and SX-3 were used as packing materials. The recoveries obtained varied from 52 to 78% depending on the compound. Quantitative data for NBS SRM 1648 were comparable with those described previously for this sample.     

Analysis of carcinogenic polycyclic aromatic hydrocarbons in complex environmental mixtures by LC-APPI-MS/MS

Here we developed a highly sensitive, fast and reliable liquid chromatography tandem mass spectrometry (LC-MS/MS) method for the detection and analysis of 16 different polycyclic aromatic hydrocarbons (PAHs) and nitro-PAHs that have been identified as carcinogens and classified according to their biological potency. Comparison to standard analysis procedures based on gas chromatography-mass spectrometry (GC-MS) instrumentation demonstrated an improved easiness of sample preparation and sensitivity of detection achieved with the new LC-MS/MS method employing an atmospheric pressure photoionization (APPI) source attached to an API 4000 mass spectrometer (LC-APPI-MS/MS). The favorable outcome could be confirmed by analyzing complex mixtures such as certain Standard Reference Materials (SRMs) obtained from the National Institute of Standards & Technology (NIST), i.e., SRM 1975 and SRM 2975, and several diesel exhaust soots provided by the German automobile industry. Certified concentrations of individual analytes provided by NIST not only could be confirmed, but additional extremely potent carcinogens such as several isomeric hexacyclic dibenzopyrenes (DBPs), 5-methylchrysene (5-MC), and others have been detected in these crude samples in a concentration range down to below 1 ng g(-1) raw material.     

Preconcentration and fluorimetric determination of polycyclic aromatic hydrocarbons based on the acid-induced cloud-point extraction with sodium dodecylsulfate

The acid-induced cloud-point extraction (CPE) technique based on sodium dodecylsulfate (SDS) micelles has been used for preconcentration of ten representatives of polycyclic aromatic hydrocarbons (PAHs) for the following fluorescence determination. The effect of the acidity of solution, SDS and electrolyte concentrations, centrifugation time and rate on the two-phase separation process and extraction percentages of PAHs have systematically been examined. Extraction percentages have been obtained for all PAHs after CPE ranged from 67 to 93%. Pyrene was used as a fluorescent probe to monitor the micropolarity of the surfactant-rich phase compared with SDS micelles and this allows one to conclude that water content in micellar phase after CPE is reduced. The spectral, metrological and analytical characteristics of PAH fluorimetric determination after acid-based CPE with sodium dodecylsulfate are presented. Advantages provided by using CPE in combination with fluorimetric determination of PAHs are discussed. The determination of benz[a]pyrene in tap water is presented as an example.     

Supercritical fluid extraction of polycyclic aromatic hydrocarbons from liver samples and determination by HPLC-FL

An extraction/clean-up procedure by SFE was developed for isolating PAHs from liver samples for subsequent HPLC-FL determination of ten PAHs in the enriched extract. Recoveries (90-115%) and RSD % (< or =7.7) were satisfactory. When applied to 11 samples of bird of prey (Tyto alba) protected species and classified of special interest, from the Galicia (Northwest to Spain), benzo[ghi]perylene and indeno[1,2,3-cd]pyrene were undetectable; chrysene and benzo[a]pyrene are only detected in one sample; benzo[a]anthracene and benzo[k]fluoranthene are only quantified in one sample and benzo[b]fluoranthene in two samples. The other PAHs, anthracene, fluoranthene and pyrene are present in almost all the samples.