Radical scavenging and antioxidant activity of tannic acid

Tannic acid, a naturally occurring plant polyphenol, is composed of a central glucose molecule derivatized at its hydroxyl groups with one or more galloyl residues. In the present paper, we examines the in vitro radical scavenging and antioxidant capacity of tannic acid by using different in vitro analytical methodologies such as 1,1-diphenyl-2-picryl-hydrazyl free radical (DPPH) scavenging, 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) radical scavenging activity, total antioxidant activity determination by ferric thiocyanate, total reducing ability determination using by Fe³⁺–Fe²⁺ transformation method, superoxide anion radical scavenging by riboflavin–methionine-illuminate system, hydrogen peroxide scavenging and ferrous ions (Fe²⁺) chelating activities. Also, butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), α-tocopherol and trolox, a water-soluble analogue of tocopherol, were used as the reference antioxidant radical scavenger compounds.Tannic acid inhibited 97.7% lipid peroxidation of linoleic acid emulsion at 15 μg/mL concentration. On the other hand, the above mentioned standard antioxidants indicated an inhibition of 92.2%, 99.6%, 84.6% and 95.6% on peroxidation of linoleic acid emulsion at 45 μg/mL concentration, respectively. In addition, tannic acid had an effective DPPH scavenging, ABTS⁺ radical scavenging, superoxide anion radical scavenging, hydrogen peroxide scavenging, Fe³⁺ reducing power and metal chelating on ferrous ions activities. Also, those various antioxidant activities were compared to BHA, BHT, α-tocopherol and trolox as references antioxidant compounds. The present study shows that tannic acid is the effective natural antioxidant component that can be used as food preservative agents or nutraceuticals.     

Mechanism and kinetics of uric acid adsorption on nanosized hydroxyapatite coating

Uric acid (UA) produced from purine metabolism is rather harmful to human health when its concentration is high. To better understand the application of hydroxyapatite (HAP) as an adsorbent for UA removal, quartz crystal microbalance (QCM) technique was employed to in situ investigate the adsorption behavior of UA on nanosized HAP coatings. This work was mainly focused on the mechanism and kinetics of UA adsorption. The obtained results showed that nanosized HAP coatings produced physical adsorption for UA, and the driving force of UA adsorption on HAP coatings was electrostatic interaction. The adsorption kinetic parameter estimated from the in situ frequency measurement was about 3.08?×?10⁶?L/mol. The obtained information suggests that QCM measurement provides a useful method for monitoring the interaction between HAP and UA.     

Investigation of the mechanism of intracluster proton transfer from sinapinic acid to biomolecular analytes

Experiments have been performed to elucidate the mechanism of proton transfer in ternary clusters containing the matrix-assisted laser-desorption ionization (MALDI) matrix sinapinic acid, nonchromophoric analytes (proline, methionine, and prolylmethionine), and argon. To investigate the mechanism of intracluster proton transfer, ionizing laser power studies were performed at 266 and 355 nm. Baseline studies show that two photons are required at both wavelengths for the formation of sinapinic acid radical cations from sinapinic acid/argon clusters. Studies of the ternary sinapinic acid/biomolecule/argon clusters show that, in all cases, the photon dependence for protonation of the biomolecule is the same as that for formation of the sinapinic acid radical cation. Furthermore, the slopes of the power plots are generally between 1.5 and 2.0, consistent with a two photon ionization process. No evidence of negative ion formation is detected in the negative ion mass spectra. The combined results are consistent with a mechanism of biomolecular intracluster protonation via proton transfer from the photoionized sinapinic acid radical cation. Wavelength dependent trends in matrix and analyte fragment ion formation in conventional MALDI mass spectra and the cluster proton transfer mass spectra were noted. The possible contribution of cluster proton transfer to the analyte protonation mechanism in conventional MALDI is discussed.     

Antioxidant activity and kinetics studies of eugenol and 6-bromoeugenol

In this work, we report the antioxidant and free radical scavenging activity of 6-bromoeugenol and eugenol. EC₅₀, the concentration providing 50% inhibition, is calculated and the antioxidant activity index (AAI) is evaluated. The antioxidant activity was evaluated using 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical-scavenging method. EC₅₀ values of 6-bromoeugenol, ascorbic acid and eugenol were 34.270 μg/mL, 54.888 μg/mL and 130.485 μg/mL, respectively. 6-Bromoeugenol showed higher AAI value (1.122) followed by ascorbic acid (0.700), then by eugenol (0.295). We also investigate the kinetics of DPPH radical scavenging activity of our products to determine the useful parameter TEC₅₀ to evaluate their antiradical efficiency (ARE). Our results have shown high ARE. This study has provided the following ARE ( × 10^? 3) order for the tested antioxidants: ascorbic acid (70.119)>6-bromoeugenol (34.842) > eugenol (21.313). Finally, we classify ascorbic acid and eugenol as fast kinetics reaction (TEC₅₀ 8.82 and 11.38 min, respectively) and 6-bromoeugenol as medium kinetics reaction (TEC₅₀ 39.24 min).     

The red beetroot extract antioxidant activity and adsorption kinetics onto hydroxyapatite-based materials

Hydroxyapatite-based materials are known to have several applications, most widely are used as implant coatings, but also as support in drug delivery. The impregnation of apatite with antioxidant substances could have a positive effect in both application areas, due to antioxidant-free radical scavenging properties, antimicrobial and antiviral effect, as in the case of red beetroot extract. By the variation of preparation parameters it is possible to control the properties of synthesized materials in function of the application field. In order to obtain hydroxyapatite-based materials with increased adsorption capacity different amounts of silica and copper ions were incorporated in the materials structure. These materials were analyzed by IR spectroscopy and TEM; particle size variation during synthesis was also monitored. Red beetroot is ranked among the ten most potent antioxidant vegetables, and their extract exhibits high antioxidant properties. The extract was examined by UV–Vis spectroscopy, and their degradation in time was monitored. The antioxidant capacity was determined by means of the Briggs–Rauscher oscillating reaction. The antioxidant activity was measured and expressed in Trolox units. The amount of adsorbed substance and adsorption efficiency was determined for the substituted materials. The adsorption mechanism was elucidated by kinetic studies involving different kinetic model evaluation. The kinetic data correlate best with the pseudo-second-order model, and the principal mechanism is the formation of chemical bonds between the active centers on the material surface and the antioxidant molecules.     

Evaluation of antioxidant activity of isoferulic acid in vitro

Isoferulic acid (3-hydroxy-4-methoxycinnamic acid, IFA), the isomer of ferulic acid (4-hydroxy-3-methoxycinnamic acid), is a rare phenolic acid occurring in Rhizoma Cimicifugae. Unlike ferulic acid, which has been well investigated, the antioxidant activity of IFA has not been measured. In this study, IFA was systematically evaluated for its in vitro antioxidant activity for the first time. IC50 values were calculated of 7.30 +/- 0.57, 4.58 +/- 0.17, 1.08 +/- 0.01, 8.84 +/- 0.43, 7.69 +/- 0.39, 1.57 +/- 0.2, 13.33 +/- 0.49 microg/mL, respectively, for lipid peroxidation, DPPH (1,1-diphenyl-2-picrylhydrazyl radical) and ABTS (3-ethylbenzthiazoline-6-sulfonic acid diammonium salt) radical scavenging, reducing power on Fe3+ and CU2+ ions, and hydroxyl and superoxide anion radical scavenging. Comparison with the IC50 values with those of the positive controls, Trolox and butylated hydroxyanisole (BHA), it can be concluded that isoferulic acid is an effective natural antioxidant in both lipid and aqueous media.     

Novel 1,3,4-thiadiazole conjugates derived from protocatechuic acid: Synthesis,antioxidant activity,and computational and electrochemical studies

A series of 15 novel 1,3,4-thiadiazole amide derivatives containing a protocatechuic acid moiety were synthesized and structurally characterized. In addition, the corresponding imino (4) and amino (5) analogues of a phenyl-substituted 1,3,4-thiadiazole amide derivative 3a were prepared to compare the effects of the structural changes on the radical-scavenging activity. The obtained compounds were examined for their antioxidative potential by 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) assays. In addition, selected compounds were studied by density functional theory (DFT) and cyclic voltammetry experiments. The tested compounds showed high potential to scavenging DPPH radical and ABTS radical cation compared with the referent antioxidants ascorbic acid and nordihydroguaiaretic acid (NDGA). On the basis of the calculated thermodynamic parameters, it can be concluded that the sequential proton loss electron transfer (SPLET) mechanism represents the most probable reaction path in a polar solvent for DPPH radical–scavenging activity. On the other hand, the single electron transfer followed by proton transfer (SET-PT) can be a likely mechanistic pathway in the case of an ABTS radical cation.     

Mechanism and kinetics of the water-assisted formic acid + OH reaction under tropospheric conditions

In this work, we have revisited the mechanism of the formic acid + OH radical reaction assisted by a single water molecule. Density functional methods are employed in conjunction with large basis sets to explore the potential energy surface of this radical-molecule reaction. Computational kinetics calculations in a pseudo-second-order mechanism have been performed, taking into account average atmospheric water concentrations and temperatures. We have used this method recently to study the single water molecule assisted H-abstraction by OH radicals (Iuga, C.; Alvarez-Idaboy, J. R.; Reyes, L.; Vivier-Bunge, A. J. Phys. Chem. Lett. 2010, 1, 3112; Iuga, C.; Alvarez-Idaboy, J. R.; Vivier-Bunge, A. Chem. Phys. Lett. 2010, 501, 11; Iuga, C.; Alvarez-Idaboy, J. R.; Vivier-Bunge, A. Theor. Chem. Acc. 2011, 129, 209), and we showed that the initial water complexation step is essential in the rate constant calculation. In the formic acid reaction with OH radicals, we find that the water-acid complex concentration is small but relevant under atmospheric conditions, and it could in principle be large enough to produce a measurable increase in the overall rate constant. However, the water-assisted process occurs according to a formyl hydrogen abstraction, rather than abstraction of carboxylic hydrogen as in the water-free case. As a result, the overall reaction rate constant is considerably smaller. Products are different in the water-free and water-assisted processes.     

Mechanism and kinetics studies of carboxyl group formation on the surface of cellulose fiber in a TEMPO-mediated system

2,2,6,6-Tetramethylpiperidine-1-oxyl radical (TEMPO) can selectively oxidize primary hydroxyl groups of cellulose to carboxyl groups. However, the depolymerization also occurs during the process. The kinetics and mechanism of carboxyl group formation on the surface of cellulose fiber oxidized by TEMPO/NaClO₂/NaClO were discussed. The oxidization and depolymerization of cellulose occurred simultaneously, according to analysis of FTIR and ¹³C CP/MAS NMR. The glucuronic acid and some small molecular fragments, formed by hydrolysis or β-elimination during the oxidation, are also discussed. The crystallization index increased and crystal size decreased, as shown by X-ray analysis. The degradation steps in the TEMPO/NaClO₂/NaClO system was discussed, according to carbon conversion analyzed by ¹³C CP/MAS NMR. The oxidation of cellulose can be described well by the kinetics model established based on the degradation of cellulose. It was found that temperature is one of the key parameters for controlling the oxdation and degradation level. The possible mechanism for oxidation of cellulose was composed.     

ATR-FTIR studies on the adsorption/desorption kinetics of dimethylarsinic acid on iron-(oxyhydr)oxides

Dimethylarsinic acid (DMA) is an organoarsenical compound that, along with monomethylarsonic acid, poses a health and an environmental risk, and a challenge to the energy industry. Little is known about the surface chemistry of DMA at the molecular level with materials relevant to geochemical environments and industrial sectors. We report herein the first in situ and surface-sensitive rapid kinetic studies on the adsorption and desorption of DMA to/from hematite and goethite at pH 7 and I = 0.01 M KCl using ATR-FTIR. Values for the apparent rates of adsorption and desorption were extracted from experimental data as a function of spectral components, flow rate of the aqueous phase, film thickness of hematite, and using chloride and hydrogen phosphate as desorbing agents. The adsorption kinetic data show fast and slow rates, consistent with the formation of more than one type of adsorbed DMA. Apparent adsorption and desorption rate constants were extracted from the dependency of the initial adsorption rates on [DMA(aq)]. Desorption rate constants were also extracted from desorption experiments using hydrogen phosphate and chloride solutions, and were found to be higher by 1-2 orders of magnitude than those using chloride. In light of the complex ligand exchange reaction mechanism of DMA desorption by phosphate species at pH 7, apparent desorption rate constants were found to depend on [hydrogen phosphate] with an order of 0.3. The impact of our studies on the environmental fate of DMA in geochemical environments, and the design of technologies to reduce arsenic content in fuels is discussed.     

Chemiluminescence determination of the in vivo and in vitro antioxidant activity of RoseOx and carnosic acid

Lipid free-radical oxidation has been studied in vivo in the mitochondrial fractions of the liver of rats fed RoseOx (carnosic acid nutritional supplement) by measuring chemiluminescence. The kinetics of the lipid chemiluminescence in rats fed RoseOx are significantly different from those of the control. The intensity of the chemiluminescence fast flash decreases by 45% (p < 0.01), which indicates a reduction of lipid peroxides. The time between fast and slow flashes increases by 96% (p < 0.05), which indicates a higher content of antioxidants in the lipid membrane. The in vitro experiments in rat liver mitochondrial fraction display more effective antioxidant action of alpha-tocopherol in 1 microM concentration than 1 microM carnosic acid by an increase of the time between fast and slow chemiluminescence flashes (p < 0.01). However, the higher antioxidant activity of 1 microM carnosic acid by a decrease of intensity of the chemiluminescence fast (p < 0.05) and slow (p < 0.05) flashes in comparison with alpha-tocopherol is revealed in these experimental conditions in vitro. Carnosic acid has antioxidant effects on homogeneous oxidation in vitro as well. The chemiluminescence of methyl oleate initiated by 2,2'-azobis(2-methylpropionitrile) decreases by 25% (p < 0.01) in the presence of 13.5 microM carnosic acid. 13.5 microM alpha-tocopherol decreases the methyl oleate chemiluminescence by 45%. A higher antioxidant activity of alpha-tocopherol in comparison with carnosic acid (p < 0.001) is found in this system. These results indicate that RoseOx reduces free-radical-induced lipid peroxidation in vivo. In vitro data show that carnosic acid has direct action as an antioxidant, rather than as a membrane-structure modifier.     

In vitro monitoring of GTPase activity and enzyme kinetics studies using capillary electrophoresis

A capillary electrophoresis (CE)-based method for the in vitro detection and monitoring of nucleotide-triphosphatase activity is described. This robust and reproducible method was used to investigate GTPase activity of a recombinant protein construct containing the catalytic domain of Human SEPT4/Bradeion β (GST-rDGTPase). This example application demonstrates that the CE technique can replace classical radioactive methods for GTPase activity assays and may be used as a routine analytical tool. Enzyme kinetics of GST-rDGTPase was studied and yielded the following kinetic parameters: v _max = 1.7 μM min⁻¹ ± 0.1, Km = 1.0 mM ± 0.3, and apKcat = 9 × 10⁻³ s⁻¹. In addition the effect of co-factors such as Mg²⁺ and Mn²⁺ on the catalytic activity was investigated. The described analytical method was also shown to be useful to analyze diphosphated and triphosphated forms of other nucleotides.     

Adsorption of humic acid from aqueous solutions on crosslinked chitosan-epichlorohydrin beads: kinetics and isotherm studies

The adsorption of humic acid on crosslinked chitosan-epichlorohydrin (chitosan-ECH) beads was investigated. Chitosan-ECH beads were characterized by Fourier transform infrared spectroscopy (FTIR), surface area and pore size analyses, and scanning electron microscopy (SEM). Batch adsorption experiments were carried out and optimum humic acid adsorption on chitosan-ECH beads occurred at pH 6.0, agitation rate of 300 rpm and contact time of 50 min. Adsorption equilibrium isotherms were analyzed by Langmuir and Freundlich models. Freundlich model was found to show the best fit for experimental data while the maximum adsorption capacity determined from Langmuir model was 44.84 mg g(-1). The adsorption of humic acid on chitosan-ECH beads was best described with pseudo-first-order kinetic model. For desorption study, more than 60% of humic acid could be desorbed from the adsorbent using 1.0M HCl for 180 min.     

Mechanism and kinetics of hydrogen oxidation on silver

The kinetic study of the stationary oxidation of hydrogen on silver was carried out. The dependences of the reaction rate on the ratios of hydrogen and oxygen in the reaction mixture under a constant total pressure of 1000 Pa were obtained at 423, 448, and 473 K. The reaction seems to proceed via the intermediate formation of surface hydroxyls. A kinetic equation of the reaction that satisfactorily described the experimental data was derived.     

Mechanism and kinetics of CO hydrogenation on metals

An antibatic relation has been established between the catalytic activities r of metals in relation to hydrogenation of CO and the selectivity in relation to methane . A mechanism is proposed for the reaction which makes it possible to interpret the observed kinetic relationships, the sequences of activities and selectivities, and also the relation between r and .Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 21, No. 5, pp. 549–553, September–October, 1985.     

Synthesis, structure, and antioxidant activity of hybrid N-substituted salicylic acid amides

Sterically hindered phenols, 3-tert-butyl-N-(3,5-di-tert-butyl-4-hydroxyphenyl)-5-ethyl-2-hydroxybenzamide and N-[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propyl]-2-hydroxybenzamide, were synthesized as potential antioxidants, and the formation of hydrogen bonds by their molecules was shown by UV and IR spectroscopy.     

Kinetic and thermodynamic aspects of the chain-breaking antioxidant activity of ascorbic acid derivatives in non-aqueous media

Ascorbic acid (vit. C) is a cofactor whose reactivity toward peroxyl and other radical species has a key-role in its biological function. At physiological pH it is dissociated to the corresponding anion. Derivatives of ascorbic acid, like ascorbyl palmitate, are widely employed in food or in cosmetics and pharmaceuticals. While the aqueous chemistry of ascorbate has long been investigated, in non-aqueous media it is largely unexplored. In this work oxygen-uptake kinetics, EPR and computational methods were combined to study the reaction of peroxyl radicals with two lipid-soluble derivatives: ascorbyl palmitate and 5,6-isopropylidene-l-ascorbic acid in non-aqueous solvents. In acetonitrile at 303 K the undissociated AscH(2) form of the two derivatives trapped peroxyl radicals with k(inh) of (8.4 ± 1.0) × 10(4) M(-1) s(-1), with stoichiometric factor of ca. 1 and isotope effect k(H)/k(D) = 3.0 ± 0.6, while in the presence of bases the anionic AscH(-) form had k(inh) of (5.0 ± 3.3) × 10(7) M(-1) s(-1). Reactivity was also enhanced in the presence of acetic acid and the mechanism is discussed. The difference in reactivity between the AscH(2)/AscH(-) forms was paralleled by a difference in O-H bond dissociation enthalpy, which was determined by EPR equilibrations as 81.0 ± 0.4 and 72.2 ± 0.4 kcal mol(-1) respectively for AscH(2) and AscH(-) in tert-butanol at 298 K. Gas-phase calculations for the neutral/anionic forms were in good agreement yielding 80.1/69.0 kcal mol(-1) using B3LYP/6-31+g(d,p) and 79.0/67.8 kcal mol(-1) at CBS-QB3 level. EPR spectra of ascorbyl palmitate in tBuOH consisted of a doublet with HSC = 0.45 G centred at g = 2.0050 for the neutral radical AscH˙ and a doublet of triplets with HSCs of 1.85 G, 0.18 G and 0.16 G centred at g = 2.0054 for Asc˙(-) radical anion.     

Electron transfer vs. proton transfer within radical-cation clusters of guanosine and deoxyguanosine with substituted naphthalenes and sinapinic acid

Guanosine (G) and deoxyguanosine (dG) radical cations can be generated in the gas phase by single electron transfer (SET) within nucleoside-dimethoxynaphthalenes (1-2) electron-bound heterodimers produced by fast atom bombardment in a four sector mass spectrometer. The nucleobase guanine is much more easily oxidized when it is linked to a ribose moiety. The radical cation dimers formed by G and dG with sinapinic acid behave as proton-bound heterodimers. The experiments mimic to some extent the migration of radical sites within stacking bases which causes DNA damaging through depurination processes.     

Organo-sulfonic acid catalyzed degradation kinetics and thermodynamic studies of nylon-6 by hydrothermal method

Nylon-6 as an engineering polymer and its starting monomer are both costly. Chemical reutilization offers some economic and environmental benefits. Depolymerization of nylon-6 was carried out by the conventional technique of hydrothermal method using various organo-sulfonic acids such as Methane sulfonic acid (MSA), para-toluene sulfonic acid (p-TSA), benzene sulfonic acid (BSA), and tetra-butyl ammonium bromide (TBAB) as a phase transfer catalyst. Various parameters such as temperature, time, normality of acids, and phase transfer catalyst concentration were varied to optimize its parameters, and characterization techniques such as amine value titrations and Fourier transform infrared spectroscopy were used for quantitative measurements. Solid-state ¹³C NMR was done for structure confirmation. A chemical kinetics interpretation shows degradation mechanism follows first-order kinetics under various catalysts. MSA has the highest reaction rate of 8.49 × 10^?2 h^?1 at 90°C; it decreases to 7.72 × 10^?2 h^?1 at 100°C. At the same time, aromatic Sulfonic acids such as p-TSA and BSA have a higher reaction rate of 8.995 × 10^?2 h^?1 and 5.582 × 10^?2 h^?1, respectively. The activation energy was lowered as the acidity of organo-sulfonic acids increased as benzene sulfonic acid has the lowest E_a. Followed by p-TSA, and MSA has the highest E_a. Free energy shows a similar kind of value. A simple theoretical model was used to calculate the activation energy. Thermodynamic parameters such as heat of enthalpy and entropy of reaction were evaluated using the Eryig–Polanyi equation. The combined catalytic effect of organo-sulfonic acids and phase-transfer catalyst provides a better environment-friendly method for depolymerizing nylon-6.