Optically active, bulky tris(oxazolinyl)borato magnesium and calcium compounds for asymmetric hydroamination/cyclization

The synthesis of the new chiral, pseudo C₃-symmetric, monoanionic ligand tris(4S-tert-butyl-2-oxazolinyl)phenylborate [To^T]⁻ is reported. The steric bulk, tridentate coordination, and anionic charge of [To^T]⁻ are suitable for formation of complexes of the type To^TMX, where one valence is available for reactivity. With this point in mind, we prepared magnesium and calcium To^T complexes that resist redistribution to (To^T)₂M compounds. Both To^TMgMe and To^TCaC(SiHMe₂)₃ contain tridentate To^T-coordination to the metal center, as shown by NMR spectroscopy, infrared spectroscopy, and X-ray crystallography. These compounds are active catalysts for the cyclization of three aminoalkenes to pyrrolidines, and provide non-racemic mixtures of pyrrolidines in enantiomeric excesses up to 36%.     

Methylene transfer from SnMe groups mediated by a rhodium(I) pincer complex: Sn-C, C-C, and C-H bond activation

The PCP-Rh(I) complex 1a based on the [1,3-phenylenebis(methylene)]bis(diisopropylphosphine) ligand reacts with [diazo(phenyl)methyl]trimethylstannane (2) at room temperature to give novel pincer-type phenyl(dimethylstannyl)methylene]hydrazinato complex 3a. The reaction sequence involves a unique combination of Sn-C bond cleavage, C-C bond formation, C-H activation and intramolecular deprotonation of a rhodium hydride intermediate, which results in methylene transfer from an SnMe group to the pincer system and PCP-chelate expansion. A methylene-transfer reaction was also demonstrated with tetramethyltin as the methylene source in the presence of KOC(CH(3))(3) at room temperature. The resulting unstable "chelate-expanded" Rh(I) complex [(C(10)H(5)(CH(2)PiPr(2))(2))(CH(2))Rh(L)] (L=N(2), THF; 4a) was isolated as its carbonyl derivative 5a. Heating 4a in benzene yielded an equimolar amount of toluene and 1a, which demonstrates the ability of the Rh(I) pincer complex to extract a methylene group from an unactivated alkyl tin substrate and transfer it, via C-C followed by C-H activation, to an arene. Use of fluorobenzene resulted in formation of fluorotoluene. Catalytic methylene-group transfer mediated by 1a was not possible, because of formation of o-xylylene complex 8 under the reaction conditions. Steric parameters play a decisive role in the reactivity with tin compounds; while iPrP derivative 1 a underwent facile reactions, tBuP complex 1b was inert.     

Effects of tris(pyrazolyl)borato ligand substituents on dioxygen activation and stabilization by copper compounds

Dinuclear [Cu2(mu-O)2(Tp(R,R')2] complexes, analogues of the active site of oxyhemocyanin, are theoretically studied, and the effect of the substituents of the tris(pyrazolyl)borate ligands, Tp(R,R'), is analyzed. Density functional theory calculations reveal that the type of bridging oxygen, peroxo, or bisoxo is strongly influenced by the nature and position of the R substituents because of variable substituent...bridging oxygen interactions, as well as electronic effects. The electronic effects of ligands at the 5 position are not significant, but peroxo complexes are favored by electron-withdrawing groups at the 3 position while bisoxo ones are strongly sterically disfavored.     

Alpha,beta-unsaturated imines from titanium hydroamination and functionalization by rhodium C-H activation

Titanium pyrrolyl complexes are effective catalysts for the synthesis of alpha,beta-unsaturated imines, which can be further functionalized using Rh-catalyzed alkene or alkyne insertion into the beta-C-H bond.     

Mechanism of the rhodium(III)-catalyzed arylation of imines via C-H bond functionalization: inhibition by substrate

Rh(III)-catalyzed arylation of imines provides a new method for C-C bond formation while simultaneously introducing an α-branched amine as a functional group. This detailed mechanistic study provides insights for the rational future development of this new reaction. Relevant intermediate Rh(III) complexes have been isolated and characterized, and their reactivities in stoichiometric reactions with relevant substrates have been monitored. The reaction was found to be first order in the catalyst resting state and inverse first order in the C-H activation substrate.     

Synthesis and Characterization of Tris(oxazolinyl)borato Copper(II) and Copper(I) Complexes

The reaction of To^MTl (To^M=tris(4,4-dimethyl-2-oxazolinyl)phenylborate) and CuBr₂ in benzene at 60 °C provides To^MCuBr ( 1 ) as an entry-point into tris(oxazolinyl)phenylborato copper chemistry. To^MCuO^tBu ( 2 ) and To^MCuOAc ( 3 ) are prepared by the reactions of To^MCuBr with KO^tBu and NaOAc, respectively. To^MCuO^tBu is transformed into (To^MCuOH)₂ ( 4 ) through hydrolysis. NMR, FT-IR, and EPR spectroscopies are used to determine the electronic and structural properties of these copper(II) compounds, and the solid-state structures were characterized by X-ray crystallography. Reduction of copper is observed upon treatment of To^MCuO^tBu with phenylsilane in an attempt to synthesize monomeric copper(II) hydride. To^MCu ( 5 ) and To^M₂Cu ( 6 ) were independently synthesized and characterized for comparison.     

C-C, C-O and C-N bond formation via rhodium(III)-catalyzed oxidative C-H activation

Rhodium(III)-catalyzed direct functionalization of C-H bonds under oxidative conditions leading to C-C, C-N, and C-O bond formation is reviewed. Various arene substrates bearing nitrogen and oxygen directing groups are covered in their coupling with unsaturated partners such as alkenes and alkynes. The facile construction of C-E (E = C, N, S, or O) bonds makes Rh(III) catalysis an attractive step-economic approach to value-added molecules from readily available starting materials. Comparisons and contrasts between rhodium(III) and palladium(II)-catalyzed oxidative coupling are made. The remarkable diversity of structures accessible is demonstrated with various recent examples, with a proposed mechanism for each transformation being briefly summarized (critical review, 138 references).     

Rhodium(I) and rhodium(III) complexes formed by coordination and C-H activation of bulky functionalized phosphanes

The reaction of [[RhCl(C(8)H(14))(2)](2)] (2) with iPr(2)PCH(2)CH(2)C(6)H(5) (L(1)) led, via the isolated dimer [[RhCl(C(8)H(14))(L(1))](2)] (3), to a mixture of three products 4 a-c, of which the dinuclear complex [[RhCl(L(1))(2)](2)] (4 a) was characterized by Xray crystallography. The mixture of 4a-c reacts with CO, ethene, and phenylacetylene to give the square-planar compounds trans-[RhCl(L)(L(1))(2)] (L=CO (5), C(2)H(4) (6), C=CHPh (9)). The corresponding allenylidene(chloro) complex trans-[RhCl(=C=C=CPh(2))(L(1))(2)] (11), obtained from 4 a-c and HC triple bond CC(OH)Ph(2) via trans-[RhCl[=C=CHC(OH)Ph(2)](L(1))(2)] (10), could be converted stepwise to the related hydroxo, cationic aqua, and cationic acetone derivatives 12-14, respectively. Treatment of 2 and [[RhCl(C(2)H(4))(2)](2)] (7) with two equivalents of tBu(2)PCH(2)CH(2)C(6)H(5) (L(2)) gave the dimers [[RhCl(C(8)H(14))(L(2))](2)] (15) and [[RhCl(C(2)H(4))(L(2))](2)] (16), which both react with L(2) in the molar ratio of 1:2 to afford the five-coordinate aryl(hydrido)rhodium(III) complex [RhHCl(C(6)H(4)CH(2)CH(2)PtBu(2)-kappa(2)C,P)(L(2))] (17) by C-H activation. The course of the reactions of 17 with CO, H(2), PhC triple bond CH, HCl, and AgPF(6), leading to the compounds 19-21, 24, and 25 a, respectively, indicate that the coordinatively unsaturated isomer of 17 with the supposed composition [RhCl(L(2))(2)] is the reactive species. Labeling experiments using D(2), DCl, and PhC triple bond CD support this proposal. With either [Rh(C(8)H(14))(eta(6)-L(2)-kappaP]PF(6) or [Rh(C(2)H(4))(eta(6)-L(n)-kappaP]PF(6) (n=1 and 2) as the starting materials, the corresponding halfsandwich-type complexes 27, 28, and 32 were obtained. The nonchelating counterpart of the dihydrido compound 32 with the composition [RhH(2)(PiPr(3))(eta(6)-C(6)H(6))]PF(6) (35) was prepared stepwise from [Rh(C(2)H(4))(PiPr(3))(eta(6)-C(6)H(6))]PF(6) and H(2) in acetone via the tris(solvato) species [RhH(2)(PiPr(3))(acetone)(3)]PF(6) (34) as intermediate. The synthesis of the bis(chelate) complex [Rh(eta(4)-C(8)H(12))(C(6)H(5)OCH(2)CH(2)PtBu(2)-kappa(2)O,P)]BF(4) (39) is also described. Besides 4 a, the compounds 17, 25 a, and 39 have been characterized by Xray crystal structure analysis.     

Double C-H activation during functionalization of phenyl(methyl)ketene on iridium(I) using alkynes. synthesis of 1,4-dien-3-ones

Under the influence of an Ir(I) metal fragment, the methyl group of phenyl(methyl)ketene undergoes two C-H activations in reacting with internal alkynes, giving metallacycles 3 in 86-94% yield. Treatment of 3 with CO liberates 1,4-dien-3-ones 5 in 81-93% yield, along with CO complex 4. A possible mechanism for the very selective double C-H activation-alkyne coupling is discussed.     

Multiple state emission from rhodium(I) and iridium(I) complexes

The effect of temperature (2–100 K) on the emission spectra and lifetimes of [M(2 = phos)₂]ClO₄ (M = Rh(I), Ir(I): 2 = phos is cis-1,2-bis-(diphenylphosphino)ethylene) is interpreted with a two-level spin-orbit-split emitting manifold. For [Ir(2 = phos)₂]ClO₄, Δ? = 143cm^?1, τ(lower) = 999μs, and τ(higher) = 1.54 μs. For the rhodium species, Δ? = 35 cm^?1, τ(lower) = 5920 μs, and τ(higher) = 20.3 μs.     

Regioselective functionalization of iminophosphoranes through Pd-mediated C-H bond activation: C-C and C-X bond formation

The orthopalladation of iminophosphoranes [R(3)P=N-C(10)H(7)-1] (R(3) = Ph(3) 1, p-Tol(3) 2, PhMe(2) 3, Ph(2)Me 4, N-C(10)H(7)-1 = 1-naphthyl) has been studied. It occurs regioselectively at the aryl ring bonded to the P atom in 1 and 2, giving endo-[Pd(μ-Cl)(C(6)H(4)-(PPh(2=N-1-C(10)H(7))-2)-κ-C,N](2) (5) or endo-[Pd(μ-Cl)(C(6)H(3)-(P(p-Tol)(2)=N-C(10)H(7)-1)-2-Me-5)-κ-C,N](2) (6), while in 3 the 1-naphthyl group is metallated instead, giving exo-[Pd(μ-Cl)(C(10)H(6)-(N=PPhMe(2))-8)-κ-C,N](2) (7). In the case of 4, orthopalladation at room temperature affords the kinetic exo isomer [Pd(μ-Cl)(C(10)H(6)-(N=PPh(2)Me)-8)-κ-C,N](2) (11exo), while a mixture of 11exo and the thermodynamic endo isomer [Pd(μ-Cl)(C(6)H(4)-(PPhMe=N-C(10)H(7)-1)-2)-κ-C,N](2) (11endo) is obtained in refluxing toluene. The heating in toluene of the acetate bridge dimer [Pd(μ-OAc)(C(10)H(6)-(N=PPh(2)Me)-8)-κ-C,N](2) (13exo) promotes the facile transformation of the exo isomer into the endo isomer [Pd(μ-OAc)(C(6)H(4)-(PPhMe=N-C(10)H(7)-1)-2)-κ-C,N](2) (13endo), confirming that the exo isomers are formed under kinetic control. Reactions of the orthometallated complexes have led to functionalized molecules. The stoichiometric reactions of the orthometallated complexes [Pd(μ-Cl)(C(10)H(6)-(N=PPhMe(2))-8)-κ-C,N](2) (7), [Pd(μ-Cl)(C(6)H(4)-(PPh(2)[=NPh)-2)](2) (17) and [Pd(μ-Cl)(C(6)H(3)-(C(O)N=PPh(3))-2-OMe-4)](2) (18) with I(2) or with CO results in the synthesis of the ortho-halogenated compounds [PhMe(2)P=N-C(10)H(6)-I-8] (19), [I-C(6)H(4)-(PPh(2)=NPh)-2] (21) and [Ph(3)P=NC(O)C(6)H(3)-I-2-OMe-5] (23) or the heterocycles [C(10)H(6)-(N=PPhMe(2))-1-(C(O))-8]Cl (20), [C(6)H(5)-(N=PPh(2)-C(6)H(4)-C(O)-2]ClO(4) (22) and [C(6)H(3)-(C(O)-1,2-N-PPh(3))-OMe-4]Cl (24).     

Rhodium-catalyzed regioselective C-H functionalization via decarbonylation of acid chlorides and C-H bond activation under phosphine-free conditions

Efficient rhodium(I)-catalyzed regioselective functionalization of aromatic C-H bonds has been realized with acid chlorides as the coupling partners via decarbonylation and C-H activation under phosphine-free conditions.     

Hydrogenation of cyclohexene catalyzed by polymer- bound rhodium(I) and iridium(I) complexes

The catalytic hydrogenation of cyclohexene using Rh^I and Ir^I polymer-bound cationic complexes as catalysts is reported, and the solvent effect in these reductions has been investigated. In most case the reaction is characterized by the presence of a solvent-dependent induction period which has been investigated and is discussed. In several cases ESR-active Rh^II species have been detected at the end of the catalytic reaction. Recycling of the catalysts led to higher catalytic activity.     

Rhodium(III)-catalyzed arylation of Boc-imines via C-H bond functionalization

The first rhodium-catalyzed arylation of imines proceeding via C-H bond functionalization is reported. Use of a non-coordinating halide abstractor is important to obtain reactivity. Aryl-branched N-Boc-amines are formed, and a wide range of functionality is compatible with the reaction.     

Intramolecular rearrangement in diphenylfulvene complexes of iridium(I) and rhodium(I)

Variable temperature NMR spectra of the complexes [M(C₅H₄CPh₂)(C₈H₁₂)]X (C₅H₄CPh₂ = 6,6-diphenylfulvene; C₈H₁₂ = 1,5-cyclooctadiene; M = Ir, X = PF₆; M = Rh, X = ClO₄) provide evidence of intramolecular rearrangement involving rotation of the diphenylfulvene ligand about the metal-fulvene axis. Rearrangement is slow on the NMR time-scale for both complexes at 223 K: spectra recorded at higher temperatures indicate that the barrier to rotation of the diphenylfulvene ligand is lower for the iridium than for the rhodium complex.