Diffusion exchange NMR spectroscopic study of dextran exchange through polyelectrolyte multilayer capsules

Diffusion exchange of dextran with molecular weights 4.4 and 77 kDa through polyelectrolyte multilayer (PEM) hollow capsules consisting of four bilayers of polystyrene sulfonate/polydiallyldimethylammonium chloride has been investigated using two-dimensional nuclear-magnetic-resonance methods: diffusion-diffusion exchange spectroscopy (DEXSY) and diffusion-relaxation correlation spectroscopy (DRCOSY). Results obtained in DRCOSY experiments show that the diffusion process of dextran 77 kDa exhibits an observation time dependence suggesting a diffusion behavior restricted by confinement. We find evidence for both single capsule and capsule aggregate states, with a partitioning of the 77-kDa dextran between the free and capsule states much larger than that suggested by volume fraction alone. Results from DEXSY experiments show that dextran 77 kDa is in diffusive exchange through the capsules with an exchange time of around 1 s. In contrast, the capsules have no detectable influence on the diffusion process of the dextran 4.4 kDa. This quantitative information may be used in designing PEM capsules as drug carriers.     

Renewable urea sensor based on a self-assembled polyelectrolyte layer

A renewable urea sensor based on a carboxylic poly(vinyl chloride) (PVC-COOH) matrix pH-sensitive membrane has been proposed, in which a positively charged polyelectrolyte layer is first constructed by using a self-assembly technique on the surface of a PVC-COOH membrane, and urease, with negative charges, is then immobilized through electrostatic adsorption onto the PVC-COOH membrane, by controlling the pH of the urease solution below its isoelectric point. The response characteristics of the PVC-COOH pH-sensitive membrane and the effects of experimental conditions have been investigated in detail. Compared with conventional covalent immobilization, the urea sensor made with this self-assembly immobilization shows significant advantage in terms of sensitivity and ease of regeneration. The potential responses of the urea sensor with self-assembly immobilization increase with the urea concentration over the concentration range 10(-5) - 10(-1) mol l(-1), and the detection limit is 0.028 mmol(-1). Moreover, this type of urea sensor can be repeatedly regenerated by using a simple washing treatment with 0.01 mol l(-1) NaOH (containing 0.5 mol l(-1) NaCl) and 0.01 mol l(-1) HCl. The urease layers and the polyelectrolyte layers on the PVC-COOH membrane are removed, the potential response of the sensor to urea solutions of different concentrations returns nearly to zero, and another assembly cycle of urease and polyelectrolyte can then be carried out.     

Spectrophotometric flow-injection determination of urea in body fluids by using an immobilized urease reactor

A flow system involving a packed-bed enzyme reactor (volume 180 μl) with urease immobilized covalently on poly(glycidyl methacrylate)-coated porous glass is used for determining urea in blood serum and urine. Enzymatically produced ammonia is converted to an indophenolate dye (by oxidative coupling with hypochlorite and sodium salicylate), which is detected spectrophotometrically at 700 nm. The calibration graph is rectilinear for 25–500 μM urea when injecting samples (75 μl) diluted 1:50 for serum or 1:1000 for urine at a frequency of 60 h^?1; the relative standard deviation is 1.1% for ten injections of 300 μM urea. The immobilized urease is stabilized by the addition of disodium EDTA, sodium azide and 2-mercaptoethanol to a 0.2 M phosphate buffer (pH 6.9) used as the carrier stream, which serves also as a preservative for longterm storage of the urease reactor packing at 4°C.     

New Urea Biosensor Based on Urease Enzyme Obtained from Helycobacter pylori

The urease enzyme of Helicobacter pylori was isolated from biopsy sample obtained from antrum big curvature cell extracts. A new urea biosensor was prepared by immobilizing urease enzyme isolated from Helicobacter pylori on poly(vinylchloride) (PVC) ammonium membrane electrode by using nonactine as an ammonium ionophore. The effect of pH, buffer concentration, and temperature for the biosensor prepared with urease from H. pylori were obtained as 6.0, 5 mM, and 25 °C, respectively. We also investigated urease concentration, stirring rate, and enzyme immobilization procedures in response to urea of the enzyme electrode. The linear working range of the biosensor extends from 1 × 10(-5) to 1 × 10(-2) M and they showed an apparent Nernstian response within this range. Urea enzyme electrodes prepared with urease enzymes obtained from H. pylori and Jack bean based on PVC membrane ammonium-selective electrode showed very good analytical parameters: high sensitivity, dynamic stability over 2 months with less decrease of sensitivity, response time 1-2 min. The analytical characteristics were investigated and were compared those of the urea biosensor prepared with urease enzyme isolated from Jack bean prepared at the same conditions. It was observed that rapid determinations of human serum urea amounts were also made possible with both biosensors.     

Synthesis and characterization of photolabile o-nitrobenzyl derivatives of urea

We present here the synthesis and characterization of four photolabile derivatives of urea in which alpha-substituted 2-nitrobenzyl groups are covalently attached to the urea nitrogen. These derivatives photolyze readily in aqueous solution to release free urea. The alpha-substituents of the 2-nitrobenzyl group strongly influence the rate of the photolysis reaction measured with transient absorption spectroscopy. Rates of photolysis at pH 7.5 and room temperature (approximately 22 degrees C) for N-(2-nitrobenzyl)urea, N-(alpha-methyl-2-nitrobenzyl)urea, N-(alpha-carboxymethyl-2-nitrobenzyl)urea, and N-(alpha-carboxy-2-nitrobenzyl)urea are, respectively, 1.7 x 10(4), 8.5 x 10(4), 4.0 x 10(4), and 1.1 x 10(5) s(-)(1). The quantum yields determined by measurement of free urea following irradiation by a single laser pulse at 308 nm were 0.81 for N-(2-nitrobenzyl)urea, 0.64 for N-(alpha-methyl-2-nitrobenzyl)urea, and 0.56 for N-(alpha-carboxy-2-nitrobenzyl)urea. The caged N-(alpha-carboxy-2-nitrobenzyl)urea is not a substrate of the enzyme urease, while the photolytically released urea is. Also, neither this caged urea nor its photolytic side products inhibit hydrolysis of free urea by urease. Thus, the alpha-carboxy-2-nitrobenzyl derivative of urea is suitable for mechanistic investigations of the enzyme urease.     

Light-responsive polyelectrolyte/gold nanoparticle microcapsules

We report the preparation and characterization of light-responsive delivery vehicles, microcapsules composed of multiple polyelectrolyte layers and light-absorbing gold nanoparticles. The nanostructured capsules were loaded with macromolecules (fluorescein isothiocyanate-labeled dextran) by exploiting the pH-dependence of the shell permeability, and the encapsulated material was released on demand upon irradiation with short (10 ns) laser pulses in the near-infrared (1064 nm). In addition, the polyelectrolyte multilayer shell was modified with lipids (dilauroylphosphatidylethanolamine) and then functionalized with ligands (monoclonal immunoglobulin G antibodies) for the purposes of enhanced stability and targeted delivery, respectively. We anticipate that these capsules will find application in a range of areas where controlled delivery is desirable.     

The burden borne by urease

At the active site of urease, urea undergoes nucleophilic attack by water, whereas urea decomposes in solution by elimination of ammonia so that its rate of spontaneous hydrolysis is unknown. Quantum mechanical simulations have been interpreted as indicating that urea hydrolysis is extremely slow, compared with other biological reactions proceeding spontaneously, and that urease surpasses all other enzymes in its power to enhance the rate of a reaction. We tested that possibility experimentally by examining the hydrolysis of 1,1,3,3-tetramethylurea, from which elimination cannot occur. In neutral solution at 25 degrees C, the rate constant for the uncatalyzed hydrolysis of tetramethylurea is 4.2 x 10-12 s-1, which does not differ greatly from the rate constants observed for the uncatalyzed hydrolysis of acetamide (5.1 x 10-11 s-1) or N,N-dimethylacetamide (1.8 x 10-11 s-1) under the same conditions. We estimate that the proficiency of urease as a catalyst, (kcat/Km)/knon, is 8 x 1017 M-1, slightly higher than the values for other metalloenzymes (carboxypeptidase b and cytidine deaminase) that catalyze the hydrolysis of similar bonds.     

Flow injection analysis as a diagnostic technique for development and testing of chemical sensors

An immobilized urease sensor is developed for continuous, on-line analysis. The sensor consists of the enzyme urease, cross-linked with bovine serum albumin into a cellulose pad, with an acid-base indicator dye covalently bound to the surface of the cellulose. The sensor is placed within a flow-injection optosensing system to monitor the change in pH, and subjected to a through evaluation, using the flow-injection technique; sensor stability (both dye and enzyme stability), speed of sensor response, sensor sensitivity, sensor-to-sensor reproducibility, response to a typical interferent, and sensor lifetime data are obtained. Sensor poisoning upon exposure to low levels of mercury, and subsequent regeneration of the immobilized enzyme pad, is investigated for use as an on-line mercury sensor. The urea sensor is also evaluated for use as a continuous monitor for urea in kidney dialysate. Enzyme Michaelis-Menten constants are determined for the immobilized urease, under given assay conditions, using a stopped-flow flow-injection technique.     

An Enzyme microsensor for urea based on an ammonia gas electrode

A urea microsensor was fabricated by immobilizing urease at the tip (10-μm diameter) of a rapidly responding ammonia gas microelectrode based on antimony. The construction and evaluation of both the urea senson and the ammonia electrode are described in detail. The urea sensor responds to 10^?2?10^?4 M urea in 30–45 s.     

Stabilization of Sensing Assay within Polyelectrolyte-Coated Alginate Microspheres for Optical Urea Sensing

Abstract

A new absorbance-based enzymatic biosensor for determination of urea (in the range 0.01 to 6.7 mM) is described. Quantification using cresol red dye, immobilized in the nanofilm coatings assembled on alginate microspheres to immobilize the urease enzyme, has been accomplished using ratiometric absorbance measurements. The effect of salt concentration in polyelectrolyte nanofilms (on the stability of dye molecules) and buffer pH (on the enzyme stability) are reported. The results demonstrate excellent stability of sensing assay within alginate microspheres. Urea-sensing experiments demonstrate the potential to develop an optical urea sensor that is stable over a month.     

Incorporation of block copolymer micelles into multilayer films for use as nanodelivery systems

This work demonstrates the potential application of stimulus responsive block copolymer micelles as triggerable delivery systems for use within multilayer films. Cationic, pH-responsive micelles of poly[2-(dimethylamino)ethyl methacrylate-block-poly(2-(diethylamino)ethyl methacrylate)] (PDMA-PDEA) were deposited on anionic polystyrene latex particles. The charge reversal of the surface and the amount of adsorbed polymer were monitored by zeta potential measurements and colloidal titrations, respectively. Prior to adsorption, the PDMA-PDEA micelles were loaded with a hydrophobic dye, and UV-vis spectroscopy was used to determine the amount of dye encapsulated within a monolayer of micelles. It was found that subtle chemical modification of the PDMA-PDEA diblock copolymer via permanent quaternization of the PDEA block results in micelles with tunable loading capacities. Multilayers of cationic micelles of partially quaternized PDMA-PDEA and anionic polyelectrolyte (poly(sodium 4-styrene sulfonate)) were deposited on the surface of polystyrene latex particles by sequential adsorption. UV-vis analysis of the dye present within the multilayer after the addition of each layer demonstrates that the micelles are sufficiently robust to retain encapsulated dye after multiple adsorption/washing cycles and can thus create a film that can be increasingly loaded with dye as more micelle layers are adsorbed. Multiple washing cycles were performed on micellar monolayers of PDMA-PDEA to demonstrate how such systems can be used to bring about triggerable release of actives. When performing several consecutive washing steps at pH 9.3, the micelle structure of the PDMA-PDEA micelles in the monolayer is retained, resulting in only a small reduction in the amount of encapsulated dye. In contrast, washing at pH 4, the structure of the micelle layers is severely disrupted, resulting in a fast release of the encapsulated dye into the bulk. Finally, if a sufficient number of micelle/homopolyelectrolyte layers are adsorbed, it is possible to selectively dissolve the latex template, resulting in hollow capsules.     

Urease‐Catalyzed Carbonate Precipitation inside the Restricted Volume of Polyelectrolyte Capsules

A new biomimetic approach for performing CaCO₃ synthesis exclusively inside micron‐sized polyelectrolyte capsules, based on the fermentative formation of a precipitative agent (CO₃²⁻ anion) by urease‐catalyzed urea hydrolysis, was developed. Precipitated CaCO₃ completely fills the interior capsule volume and has a metastable vaterite phase.

     

A coated-metal enzyme electrode for urea determinations

A potentiometric enzyme electrode is reported in which an enzyme immobilized in polyvinyl chloride is used to coat an antimony metal electrode to detect changes in pH when the electrode is immersed in a solution of the enzyme substrat. As an example, urea is determined in solution by using immobilized urease on an antimony electrode, giving a linear concentration range of 5.0 × 10^-4–1.0 × 10^-2 M urea with a slope of 44 mV per decade change in urea concentration. The response slope is stable for about 1 week, with response times in the range 1–2 min, but with absolute potential changes occurring from day to day.     

Affinity partitioning of enzymes using dextran-bound procion yellow HE-3G. Influence of dye-ligand density

The dye Procion Yellow HE-3G was bound to dextran of molecular weight 70,000 and the partitioning of this dye-polymer within an aqueous two-phase system containing dextran and poly(ethylene glycol) was studied as function of ligand density, polymer concentration, type of salt, concentration of salt and concentration of dye-dextran. Even moderate dye:dextran molar ratios (5-8) make the partitioning strongly salt-dependent. The dye-dextran can be directed to either the upper or the lower phase with partition coefficients from 0.02 to 28 by using salts. The dye-dextran in the two-phase system affects the partitioning of dye-binding enzymes (lactate dehydrogenase, glucose-6-phosphate dehydrogenase, 3-phosphoglycerate kinase) towards the dye-containing phase. Measurements of competition with nucleotide binding show an increased affinity of the dye for the enzyme with increasing ligand:dextran ratio. Theoretical considerations indicate that 1-2 dextran molecules are attached per enzyme molecule when affinity partitioning is fully developed.     

Polyelectrolyte capsules made of two biocompatible natural polymers

In this study the influence of the experimental conditions on the obtention of polyelectrolyte multilayer capsules was investigated. Two ways of the simple coacervation method was used to obtain spherical capsules involving chitosan and hyaluronan, chitosan being inside the particle covered by a hyaluronan layer to increase the biocompatibility. The ¹H-NMR spectroscopy confirmed a polyelectrolyte complex formation and the optical microscopy shows that the complexed capsules have good sphericity with average diameters ranging from 590 at 1550 μm in the experimental conditions adopted. One can observe that in the acid medium the complexed capsules are much stable than the chitosan beads. The structures described provide a starting point for the design and fabrication of complexed capsules made of two biocompatible natural polymers with potential applicability in medical or pharmaceutical applications. Few diffusion experiments demonstrated that the complexed layer controls the diffusion of dextran included in the chitosan inner domain.     

Potentiometric determination of urea by sequential injection using Jack bean meal crude extract as a source of urease

A sequential injection system was proposed to accomplish the potentiometric determination of urea. This procedure used an ammonium tubular selective electrode to assess ammonium concentration produced by enzymatic hydrolysis of urea from Jack bean meal (Canavalia ensiformis DC) crude extract. A gaseous diffusion device was coupled to the flow set-up allowing on-line sampling and suitable selectivity for determinations. A detection limit of 6.0x10(-4) mol urea l(-1), a relative standard deviation of 1.9% (n=10) and a sampling rate of 20 samples h(-1) were observed when 172 Sumner units (SU) of urease and 900 mul of sample were used. Results agreeing with a comparative method were obtained by the proposed procedure and the use of the crude extract solution combined with the sequential injection approach improved the performance, producing reproducible results and low costs in comparison with procedures using commercial enzymes.     

An enzyme reactor electrode for urea determinations.

An enzyme reactor electrode system for the determination of urea is described. A buffer is pumped through an enzyme reactor (0.4 ml) containing urease immobilized with glutaraldehyde to glass. The effluent is mixed with sodium hydroxide pumped through a second channel and fed through an ammonia gas electrode. Samples are introduced via a third flow channel and mixed with the buffer. The conversion of urea to ammonia is quantitative for sample concentrations of less than 0.03 M for a flow rate of 40 ml h^-1. The reactor electrode shows a Nernstian slope of 57 mV/decade for 5·10^-5–3·10^-2 M urea. The response is independent of variations in the flow rate, enzyme activity or temperature of the reactor.     

Elaboration of Urease Adsorption on Silicalite for Biosensor Creation

A possibility of efficient urease adsorption on silicalite for the purpose of biosensor creation was investigated. The procedure of urease adsorption on silicalite is notable for such advantages as simple and fast performance and non‐use of toxic or auxiliary compounds. Optimal conditions for modifying transducer surfaces with silicalite and subsequent urease adsorption on these surfaces were selected. The working parameters of the created biosensor were optimized. The developed biosensor with adsorbed urease was characterized by good intra‐reproducibility (RSD – 4.5 %), improved inter‐reproducibility (RSD of urea determination is 9 %) and operational stability (less than 10 % loss of activity after 10 days). Besides, the developed method for enzyme adsorption on silicalite was compared with the traditional methods of urease immobilization in biosensorics. Working conditions of the produced biosensor (pH and ionic strength) were shown to be close to those of the biosensor based on urease immobilized in GA vapor. For these reasons, it was concluded that the method of enzyme adsorption on silicalite is well‐suited for biosensor standardization aimed at its further manufacture.     

Studies on urea biosensors based on immobilized corynebacterium glutamicum and their kinetic response processes

Two novel biosensors for urea based on immobilized corynebacterium glutamicum 617 and corynebacterium glutamicum ATCC13032 in calcium alginate gel coupled with an ammonia gas-sensing electrode, were designed and constructed. Calibration plots of measured potential difference (mV) vs. log of urea concentration were linear in the range of 5.6 x 10(-5)-1.4 x 10(-2) and 5.6 x 10(-5)-1.1 x 10(-2) mol l(-1), with slopes of 59.2 and 61.3 mV per decade respectively, in pH 8.0, 0.1 mol l(-1) phosphate buffer solution at 30 degrees C. The relationship between the initial response velocity and the substrate concentration was also discussed. The results indicate that the kinetic response process of the reaction catalyzed by bacteria is similar to that by isolated enzyme. Using an Eadie-Hofstee plot, the apparent Michaelis constant K(m) and the maximum initial response velocity V(m) for urease in the immobilized bacterial membrane were determined. The two urea biosensors were successfully applied for the actual measurement of urea in urine and were relatively stable for 20 and 40 days respectively.     

Characterization of a urea optical sensor based on polypyrrole

A new optical sensor for urea determination is presented. It is based on the enzymatic reaction with urease, which is first photoimmobilized with polyacrylamide onto a chemically polymerized polypyrrole (PPy) film. The main advantage of this sensor is that no indicator dye or pH indicator is needed, because PPy itself acts as the support and the indicator. These PPy films show an absorbance spectrum in the near IR range which is pH dependent. The variation of absorbance is thus directly related to the change of pH caused during the enzymatic reaction, which is also dependent on the urea concentration. The linear range of the sensor is from 0.06 to 1 M of urea, which is the common level of urea concentration found in blood and urine samples.