Excited state properties of transition metal phosphine complexes

Phosphine ligands determine the excited state properties of a variety of coordination compounds. Phosphines not only influence metal-centered excited states, but participate directly in charge transfer transitions owing to their electron donating and accepting ability. Moreover, intraligand excited states are accessible if the phosphine carries suitable substituents. This diversity is illustrated by selected examples. The excited state behavior is discussed on the basis of spectral (absorption and emission) and photochemical properties of appropriate phosphine complexes.     

Antibacterial properties of ruthenium(II) benzamide complexes

Reactions of the new acyclic ligand DNBH with RuCl₃ · 3H₂O, followed by addition of a secondary ligand L (L = PPh₃, 1,10-phenanthroline, 2,2-bipyridine, pyridine and 2,4-diaminotoluene), yield six binuclear metal complexes, TR1–TR6. Two different methods were employed: template and a two-step synthesis, both yielding the same complexes. DNBH and its metal complexes were characterised by a combination of spectroscopic, elemental and magnetic susceptibility data. Coordination was found to be through the carbonyl oxygen of amide and phenolic oxygen in the octahedral environment of the metal. DNBH and some of the metal complexes display antibacterial properties.     

pH-Dependent spectroscopic and luminescent properties, and metal-ion recognition studies of Re(I) complexes containing 2-(2'-pyridyl)benzimidazole and 2-(2'-pyridyl)benzimidazolate

A series of Re(I) complexes, [Re(CO)(3)Cl(HPB)] (1), [Re(CO)(3)(PB)H(2)O] (2), [Re(CO)(3)(NO(3))(PB-AuPPh(3))] (3), and [Re(CO)(3)(NO(3))(PB)Au(dppm-H)Au](2) (4) [HPB = 2-(2'-pyridyl)benzimidazole; dppm = 2,2'-bis(diphenylphosphinomethane)], have been synthesized and characterized by X-ray diffraction. Complex 1, which exhibits interesting pH-dependent spectroscopic and luminescent properties, was prepared by reacting Re(CO)(5)Cl with an equimolar amount of 2-(2'-pyridyl)benzimidazole. The imidazole unit in complex 1 can be deprotonated to form the imidazolate unit to give complex 2. Addition of 1 equiv of AuPPh(3)(NO(3)) to complex 2 led to the formation of a heteronuclear complex 3. Addition of a half an equivalent of dppm(Au(NO(3)))(2) to complex 2 yielded 4. In both 3 and 4, the imidazolate unit acts as a multinuclear bridging ligand. Complex 4 is a rare and remarkable example of a Re(2)Au(4) aggregate in combination with μ(3)-bridging 2-(2'-pyridyl)benzimidazolate. Finally, complex 2 has been used to examine the Hg(2+)-recognition event among group 12 metal ions. Its reversibility and selectivity toward Hg(2+) are also examined.     

Platinum group metal functionalized phosphine complexes. Part 1: Phosphinoamide ruthenium(II) complexes

Summary Three new bifunctional phosphinoamide ligands of the type Ph₂PCH₂C(O)NHR (R = H, HDPA; Me, MDPA; Ph, PDPA) were prepared and characterized. Their ruthenium(II) complexes prepared from two different precursors, RuCl₂-(DMSO)₄ and RuCl₂(PPh₃)₃, are of similar composition and correspond to the formula, [RuCl(L)₂(P-O)₂]Cl (L = DMSO/PPh₃; phosphinoamide). However, RuCl₃-(AsPh₃)₂(MeOH) reacts with the phosphinoamide to yield a reduced product of the cis-RuCl₂(P-O)₂ type. The ligands and complexes were characterized by mass, i.r. and n.m.r. spectroscopy. Possible stereochemistries for the complexes are proposed.     

Spectro- and electrochemical studies of some ruthenium and osmium complexes of 2-(2'-pyridyl)benzimidazole; complexes with intra-molecular charge transfer

Reaction of Ru3(CO)12, with 2-(2'-pyridyl)benzimidazole (HPBI) resulted in the formation of Ru(CO)3(HPBI) (I) complex. In presence of pyridine or dipyridine, the two derivatives [Ru(CO)3(HPBI)].Py (II) and [Ru(CO)3(HPBI)].dpy (III) were isolated. The corresponding reactions of Os3(CO)12 yielded only one single product; Os(CO)2(HPBI)2 (IV). Spectroscopic studies of these complexes revealed intramolecular metal to ligand CT interactions. Reactions of RuCl3 with HPBI gave three distinct products; [Ru(HPBI)2Cl2]Cl (V), [Ru(HPBI)(dipy)Cl2]C1 (VI) and [Ru(PBI)2(py)2]Cl (VII). The UV-vis studies indicated the presence of intramolecular ligand to metal CT interactions. Electrochemical investigation of the complexes showed some irreversible, reversible and quasi-reversible redox reactions due to tautomeric interconversions through electron transfer.     

Spectroscopic characterization of primary and secondary phosphine ligation on ruthenium(II) complexes

Ruthenium(II) complexes of the primary phosphines PH2Fc and PH2CH2Fc and the secondary phosphine PH(CH2Fc)2, including [(p-cymene)RuCl(L)2](PF6) (p-cymene = p-iPrC6H4Me, L = PH2CH2Fc and PH(CH2Fc)2, 2b and 2c, respectively) and trans-[RuCl2(L)4] (L = PH2Fc, PH2CH2Fc, and PH(CH2Fc)2, 3a-c, respectively) were prepared and characterized by IR, 1H NMR, and 31P NMR spectroscopy. 3b was additionally characterized by X-ray crystallography. The spectroscopic effects of phosphine ligation were determined. Characteristic downfield shifts of the 31P NMR resonances and increases in energy of the nu(P-H) modes were observed in all cases. Iterative fitting of coupling constants to second-order NMR spectra also resulted in a complete elucidation of 31P-1H and 31P-31P couplings. This analysis provides a basis for considering the influence of coordinate bonding on the observed 1J(PH) and 2J(PP) constants.     

Redox properties of bis(1,10-phenanthroline)-(pyridine)ruthenium(II) complexes

The redox properties of a series of [Ru(phen)₂(py)X]ⁿ⁺ cations (X = pyridine, NH₃, Cl, Br, I, CN, SCN, N₃ and NO₂) have been investigated in acctonitrile. Two reversible reduction steps are seen at ? 1.35 and ? 1.6 V vs Ag/AgCl; the invariance of these processes with X-group is indicative of electron addition to molecular orbitals mainly of phenanthroline ligand π^* origin. Irreversible multi-electron reductions follow below ? 2.20 V. The Ru(II)/Ru(III) couple is seen as a reversible wave near + 0.8 V vs the normal hydrogen electrode, from calibration with ferrocene, except in the cases of the NO₂ and SCN complexes, where rapid reactions involving these ligands occur.     

Pd(II) and Pt(II) complexes of 2-(2'-pyridyl)-4,6-diphenylphosphinine: synthesis, structure, and reactivity

The coordination chemistry of the bidentate P,N hybrid ligand 2-(2'-pyridyl)-4,6-diphenylphosphinine (1) towards Pd(II) and Pt(II) has been investigated. The molecular structures of the complexes [PdCl(2)(1)] and [PtCl(2)(1)] were determined by X-ray diffraction, representing the first crystallographically characterized λ(3)-phosphinine-Pd(II) and -Pt(II) complexes. Both complexes reacted with methanol at the P=C double bond at an elevated temperature, leading to the corresponding products [MCl(2)(1H·OCH(3))]. The molecular structure of [PdCl(2)(1H·OCH(3))] was determined crystallographically and revealed that the reaction with methanol proceeds selectively by syn addition and exclusively to one of the P=C double bonds. Strikingly, the reaction of [PdCl(2)(1H·OCH(3))] with the chelating diphosphine DPEphos at room temperature in CH(2)Cl(2) led quantitatively to [PdCl(2)(DPEphos)] and phosphinine 1 by elimination of CH(3)OH and rearomatization of the phosphorus heterocycle.     

DNA-binding properties of ruthenium(II) complexes with the bidentate ligand 5-chloro-2-(phenylazo)pyridine

A bidentate ligand, 5-chloro-2-(phenylazo)pyridine (Clazpy), and its two polypyridyl ruthenium(II) complexes, [Ru(Clazpy)₂bpy]Cl₂·7H₂O (1) and [Ru(Clazpy)₂phen]Cl₂·8H₂O (2), were synthesized and characterized. The DNA-binding properties of these complexes with DNA, the breast cancer susceptibility gene 1 (BRCA1), and the pBIND plasmid DNA were probed by photocleavage, electronic absorption titration, ethidium bromide quenching, and thermal denaturation. Both complexes were found to bind to the BRCA1 fragment through the intercalative mode into the base pairs of DNA, and the DNA-binding constants (K_b) for 1 and 2 were 7.0 × 10⁴ M⁻¹ and 5.1 × 10⁵ M⁻¹, respectively. In addition, both complexes enhanced the single-stranded cleavage of the plasmid DNA. Under comparable experimental conditions, 2 cleaved DNA more effectively than 1, in a dose–response manner. The data indicated that the binding affinity of these two complexes to DNA was dependent on the aromatic planarity and hydrophobicity of the intercalative polypyridyl ligand.     

Extraction of heterometal ruthenium(II) complexes by diphenyl(dibutylcarbamoylmethyl)phosphine oxide from nitrate-nitrite solutions

The synergistic extraction of [RuNO(NO₂)₄OH]^2? by diphenyl(dibutylcarbamoylmethyl)phosphine oxide (L) in the presence of nonprecious metal cations (M²⁺) is studied; the extraction occurs on the account of the formation of heterometal complexes [RuNO(NO₂)₄OHML_m] (M = Zn, Cu, Co, Ni) due to the addition of M²⁺ to ruthenium through the oxygen atoms of the OH and NO₂ groups and the bidentate coordination of L to M²⁺. The extraction constants for Ru/M complexes and ML_n(NO₃)₂ are determined. The variation in the extraction constants with changing M (Co, Zn, Cu > Ni) does not agree with the Irwing-Williams row, unlike the extraction with monodentate PO-containing extractants (Zn > Cu > Co > Ni). The feasibility of ruthenium extraction in the form of Ru/M complexes from complex nitrate-nitrite solutions is demonstrated.     

Linear and star-shaped polynuclear Ru(II) complexes of 2-(2'-pyridyl)benzimidazolyl derivatives: syntheses, photophysical properties and red light-emitting devices

Two new star-shaped ligands with a 1,3,5-triphenylbenzene core, tmpb (1,3,5-tris[p-2-(2'-pyridyl)benzimidazolylphenyl]benzene), and a 2,4,6-tris(p-biphenyl)-1,3,5-triazine core, tmbt (2,4,6-tris[p-2-(2'-pyridyl)benzimidazolylbiphenyl]-1,3,5-triazine), have been synthesized. Their corresponding trinuclear Ru(II) complexes [Ru3(tmpb)(bpy)6](PF6)6 (3) and [Ru3(tmpt)(bpy)6](PF6)6 (4) have been obtained. Two dinuclear linear Ru(II) complexes with previously reported ligands bmb (1,4-bis[2-(2'-pyridyl)benzimidazolyl]benzene) and bmbp (4,4'-bis[2-(2'-pyridyl)benzimidazolyl]biphenyl) and formulae [Ru2(bmb)(bpy)4](PF6)4 (1) and [Ru2(bmbp)(bpy)4](PF6)4 (2) have also been synthesized. Photophysical and electrochemical properties of the new compounds have been investigated. All four compounds display a characteristic metal-to-ligand-charge transfer (MLCT) absorption band and emit a red light when excited at the maximum of the MLCT band with emission maximum at 624, 629, 623 and 625 nm, respectively in neat films at ambient temperature. The emission quantum efficiency of the four complexes in neat films was determined to be 0.15, 0.17, 0.04 and 0.05, respectively. Light emitting devices based on these four compounds were fabricated by spin-casting the compound as a neat film to an ITO substrate, followed by the deposition of an aluminium metal layer. All devices emit a deep red light and the device behavior resembles that of a light emitting electrochemical cell. The EL maximum of the devices 1, 2, 3, and 4 is at 637, 657, 678, and 655 nm, respectively. All four devices have a fast response time when a sufficiently high voltage is applied. The device based on 2 is the brightest with a maximum luminance of 133 cd m(-2) at 7 V. The performance of devices based on 1, 2, and 4 is in general much more efficient than the device based on [Ru(bpy)3](PF6)2, which was fabricated and evaluated under the same experimental conditions as for the devices based on 1-4.     

Unusual complexing properties of 2-(2'-pyridyl)- and 2-hydrazino-8-hydroxyquinoline

The ligands 2-(2'-pyridyl)- and 2-hydrazino-8-hydroxyquinoline form terdentate complexes with a 5,5-bicyclic ring system, the stabilities being greater than those of the corresponding 8-hydroxyquinolinates. This study affords a more complete picture of the behaviour of terdentate 2-substituted 8-hydroxyquinolines. Solutions of these ligands and metal ions are complicated by formation of the protonated species MHL(2+), M(HL)(2+)(2) and MLHL(+). The existence of the protonated species is dependent not only on pH and ligand:metal-ion molar ratio but also on the nature of the metal ion itself.     

Blue luminescent 2-(2'-pyridyl)benzimidazole derivative ligands and their orange luminescent mononuclear and polynuclear organoplatinum(II) complexes

Five new 2-(2'-pyridyl)benzimidazole derivative ligands, 1,4-bis[2-(2'-pyridyl)benzimidazolyl]benzene (1,4-bmb), 4,4'-bis[2-(2'-pyridyl)benzimidazolyl]biphenyl (bmbp), 1-bromo-4-[2-(2'-pyridyl)benzimidazolyl]benzene (Brmb), 1,3-bis[2-(2'-pyridyl)benzimidazolyl]benzene (1,3-bmb), and 1,3,5-tris[2-(2'-pyridyl)benzimidazolyl]benzene (tmb), have been synthesized by Ullmann condensation methods. The corresponding mononuclear and polynuclear PtII complexes, Pt2(1,4-bmb)Ph4 (1), Pt2(bmbp)Ph4 (2), Pt(Brmb)Ph2 (3), Pt2(1,3-bmb)Ph4 (4), and Pt3(tmb)Ph6 (5), have been obtained by the reaction of the appropriate ligand with [PtPh2(SMe2)]n. The structures of the free ligands 1,4-bmb, bmbp, and tmb, as well as the complexes 1-3, were determined by single-crystal X-ray diffraction. All ligands display fluorescent emissions in the purple/blue region of the spectrum at ambient temperature and phosphorescent emissions in the blue/green region at 77 K, which are attributable to ligand-centered pi --> pi* transition. No ligand-based emission was observed for the PtII complexes 1-5. All PtII complexes display orange/red emissions at 77 K in a frozen solution or in the solid state, attributable to metal-to-ligand charge transfers (MLCT). Variable-temperature 1H NMR experiments establish that complexes 1, 4, and 5 exist in isomeric forms in solution at ambient temperature due to the hindered rotation of the square PtC2N2 planes in the complexes.     

Electroluminescence in ruthenium(II) complexes

We have investigated the electrochemical, spectroscopic, and electroluminescent properties of a family of diimine complexes of Ru featuring various aliphatic side chains as well as a more extended pi-conjugated system. The performance of solid-state electroluminescent devices fabricated from these complexes using indium tin oxide (ITO) and gold contacts appears to be dominated by ionic space charge effects. Their electroluminescence efficiency was limited by the photoluminescence efficiency of the Ru films and not by charge injection from the contacts. The incorporation of di-tert-butyl side chains on the dipyridyl ligand was found to be the most beneficial substitution in terms of reducing self-quenching of luminescence.     

Cytotoxic and DNA-binding properties of two ruthenium(II) porphyrin complexes

Two ruthenium(II) porphyrin complexes [Ru(L)₂Cl(PTP)]⁺ (L = bpy, 1, phen; 2; PTP = 5-(3′-pyridyl)-10,15,20-trimethylphenylporphyrin) have been synthesized and their antitumor activities have been evaluated by MTT(3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) methods. Both complexes exhibit high inhibitory activity against the growth of human cervical carcinoma cell line HeLa, both with and without light treatment. However, when treated with light, the inhibitory activity for both complexes increases at low drug concentration. Spectroscopic studies show that both complexes can bind to HeLa DNA tightly with apparent binding constants of 1.54(±0.07) × 10⁵ and 1.01(±0.02) × 10⁵ M⁻¹ for 1 and 2, respectively.     

Excited state decay of tetrahalomanganese(ii) complexes

The excitation and emission spectra and decay times of several MnX^2-₄ (X = Cl^?, Br^?, 1^?) complexes of various tetraalkylammonium, -phosphonium, and -arsonium salts have been measured for the pure solids at 298°K and 77°K. High luminescence quantum yields (0.3-1.0) reveal that lifetimes fairly accurately reflect radiative decay rates. An impressive correlation exists between the lifetime, τ, of the ⁴T₁ (G) →⁶ A₁ emission and the ligand, X: for X = Cl^?, τ = 1.2 - 3,5 x 10^?3 sec; X = Br^?, τ = 0.35 - 0.43 X 10^?3 sec; X =l^?, τ = 0.036 – 0.055 X 10^?3 sec. We attribute this decreasing lifetime largely to the enhanced spin-orbital coupling associated with the heavier halide. We find that direct population of high energy charge-transfer (CT) states gives smaller emission yields than excitations in the ligand-field (LF) region.     

X-ray structure and DFT study of neutral mixed phosphine azoimine complexes of ruthenium

Geometry optimization for a cis-[Ru^II(dppe)LCl₂] (1-8) {L = C₆H₅NNC(COCH₃)NAr, Ar = 2,4,6-trimethylphenyl (L₁), 2,5-dimethylphenyl (L₂), 4-tolyl (L₃), phenyl (L₄), 4-methoxyphenyl (L₅), 4-chlorophenyl (L₆), 4-nitrophenyl (L₇), 2,5-dichlorophenyl (L₈); dppe = Ph₂P(CH₂)₂PPh₂} was effected using the gaussian 03 protocol at density functional theory (DFT) B3LYP level with 6-31G^∗/lanl2dz mixed basis. In addition, the complex cis-[Ru^II(dppe)L₃Cl₂] (3) has been further characterized by X-ray diffraction analysis. It was found that the optimized structure using 6-31G^∗/lanl2dz has a large agreement with the X-ray data. DFT calculations show that upon solvation both Highest Occupied Molecular Orbital (HOMO) and Lowest Unoccupied Molecular Orbital (LUMO) molecular orbitals are stabilized and their energy gap is increased. TD-DFT calculations show that the intense broad band centered at λ_max ∼ 506 nm is assigned to “mixed metal-ligand-to-ligand charge-transfer” (MMLLCT) while the weak low energy band centered on ∼840 nm is assigned to the pure MLCT transition. The low intensity for the low energy MLCT transition can be explained by the large mixing between the azoimine (L) and (Ru(dπ)) orbital.     

Dithiocarboxylate complexes of ruthenium(II) and osmium(II)

The ruthenium(II) complexes [Ru(R)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh) are formed on reaction of IPr·CS(2) with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] (BTD = 2,1,3-benzothiadiazole) or [Ru(C(C≡CPh)=CHPh)Cl(CO)(PPh(3))(2)] in the presence of ammonium hexafluorophosphate. Similarly, the complexes [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) are formed in the same manner when ICy·CS(2) is employed. The ligand IMes·CS(2) reacts with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] to form the compounds [Ru(R)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh). Two osmium analogues, [Os(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) and [Os(C(C≡CPh)=CHPh)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) were also prepared. When the more bulky diisopropylphenyl derivative IDip·CS(2) is used, an unusual product, [Ru(κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IDip)Cl(CO)(PPh(3))(2)](+), with a migrated vinyl group, is obtained. Over extended reaction times, [Ru(CH=CHC(6)H(4)Me-4)Cl(BTD)(CO)(PPh(3))(2)] also reacts with IMes·CS(2) and NH(4)PF(6) to yield the analogous product [Ru{κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IMes}Cl(CO)(PPh(3))(2)](+)via the intermediate [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+). Structural studies are reported for [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)]PF(6) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)]PF(6).     

Preparation and properties of sandwiched trinuclear palladium(II) complexes with tridentate phosphine and phosphine sulfide ligands

The central phosphino group of tripodal tetradentate tris[2-(diphenylphosphino)ethyl]phosphine (pp₃) was selectively oxidized by the reaction with diethyl disulfide to give tridentate phosphine ligand pOp₃. The terminal phosphino groups were reacted with sulfur to give pOp₃ trisulfide (pOp₃S₃). Three palladium(II) ions were sandwiched in the two pOp₃ and pOp₃S₃ ligands to form the trinuclear complexes with three trans(P) and trans(S) PdX₂ (X = Cl, Br, I) moieties, respectively. The tripodal triphosphine, 1,1,1-tris(diphenylphosphinomethyl)ethane (i-p₃), and its mono- and tri-sulfide, which have shorter carbon chains compared with pOp₃, form the mononuclear dichloro palladium(II) complexes with cis(P) and cis(S) geometries. Difference in the catalytic activity for the C–C coupling reaction was discussed in connection with the coordinated groups and geometries of the complexes.     

Complexes of ruthenium(II) and -(III) with dimethylsulphoxide—III. Bis-iodo-tetrakis- dimethylsulphoxide ruthenium(II) and some other iodo complexes of ruthenium(II)

The ruthenium(II) complex [RuI₂(Me₂SO)₄] was synthesized and characterized. The Me₂SO ligands are all S-bonded. Reactions of RuI₂(Me₂SO)₄ with ligands containing P, N and S donor atoms have been carried out and the complexes obtained were characterized using different physical methods. [RuI₂L₄] (L= CH₃CN, Me₂SO and py), [RuI₂(CH₃CN)₂(PPh₃)₂] and [RuI₂(CS)(PPh₃)₃] have been synthesized using RuI₃ as the source material and characterized as above.