Orthoamides and Iminium Salts LXXII: N,N,N′,N′,N′′,N′′,N′′′,N′′′‐Octamethyl‐(but‐2‐yne)‐bis(amidinium) Tetrafluoroborate: The First Bis‐amidinium Salt of Acetylenedicarboxyclic Acid. A New Superelectrophile?

A method for the preparation of the first acetylenedicarboxamidinium salt from a bis‐orthoamide derivative of acetylenedicarboxyclic acid has been established. The salt reacted with cyclopentadiene and furan at room temperature to give bicyclic [4+2]‐cycloaddition products. The solid compounds were characterized by solution NMR spectroscopy and by single‐crystal X‐ray diffraction. Quantum‐chemical calculations of the isolated N,N,N′,N′,N′′,N′′,N′′′,N′′′‐octamethyl‐acetylene‐bis(carboxamidinium) ion showed very good agreement with the spectroscopic and diffraction data.     

A Straightforward Synthesis of 2‐[1‐Alkyl‐5,6‐bis(alkoxycarbonyl)‐1,2,3,4‐tetrahydro‐2‐oxopyridin‐3‐yl]acetic Acid Derivatives via Domino Michael Addition?Cyclization Reaction

A new and efficient synthesis of 2‐[1‐alkyl‐5,6‐bis(alkoxycarbonyl)‐1,2,3,4‐tetrahydro‐2‐oxopyridin‐3‐yl]acetic acid derivatives by a one‐pot three‐component reaction between primary amine, dialkyl acetylenedicarboxylate, and itaconic anhydride (=3,4‐dihydro‐3‐methylidenefuran‐2,5‐dione) is reported. The reaction was performed without catalyst and under solvent‐free conditions with excellent yields. Notably, the ready availability of the starting materials, and the high level of practicability of the reaction and workup make this approach an attractive complementary method to access to unknown 2‐[1‐alkyl‐5,6‐bis(alkoxycarbonyl)‐1,2,3,4‐tetrahydro‐2‐oxopyridin‐3‐yl]acetic acid derivatives. The structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of domino Michael addition? cyclization reaction is proposed (Scheme 2).     

6‐Chloroisocytosine and 5‐bromo‐6‐methylisocytosine: again,one or two tautomers present in the same crystal?

It is well known that pyrimidin‐4‐one derivatives are able to adopt either the 1H‐ or the 3H‐tautomeric form in (co)crystals, depending on the coformer. As part of ongoing research to investigate the preferred hydrogen‐bonding patterns of active pharmaceutical ingredients and their model systems, 2‐amino‐6‐chloropyrimidin‐4‐one and 2‐amino‐5‐bromo‐6‐methylpyrimidin‐4‐one have been cocrystallized with several coformers and with each other. Since Cl and Br atoms both have versatile possibilities to interact with the coformers, such as via hydrogen or halogen bonds, their behaviour within the crystal packing was also of interest. The experiments yielded five crystal structures, namely 2‐aminopyridin‐1‐ium 2‐amino‐6‐chloro‐4‐oxo‐4H‐pyrimidin‐3‐ide–2‐amino‐6‐chloropyrimidin‐4(3H)‐one (1/3), C₅H₇N₂⁺·C₄H₃ClN₃O⁻·3C₄H₄ClN₃O, (Ia), 2‐aminopyridin‐1‐ium 2‐amino‐6‐chloro‐4‐oxo‐4H‐pyrimidin‐3‐ide–2‐amino‐6‐chloropyrimidin‐4(3H)‐one–2‐aminopyridine (2/10/1), 2C₅H₇N₂⁺·2C₄H₃ClN₃O⁻·10C₄H₄ClN₃O·C₅H₆N₂, (Ib), the solvent‐free cocrystal 2‐amino‐5‐bromo‐6‐methylpyrimidin‐4(3H)‐one–2‐amino‐5‐bromo‐6‐methylpyrimidin‐4(1H)‐one (1/1), C₅H₆BrN₃O·C₅H₆BrN₃O, (II), the solvate 2‐amino‐5‐bromo‐6‐methylpyrimidin‐4(3H)‐one–2‐amino‐5‐bromo‐6‐methylpyrimidin‐4(1H)‐one–N‐methylpyrrolidin‐2‐one (1/1/1), C₅H₆BrN₃O·C₅H₆BrN₃O·C₅H₉NO, (III), and the partial cocrystal 2‐amino‐5‐bromo‐6‐methylpyrimidin‐4(3H)‐one–2‐amino‐5‐bromo‐6‐methylpyrimidin‐4(1H)‐one–2‐amino‐6‐chloropyrimidin‐4(3H)‐one (0.635/1/0.365), C₅H₆BrN₃O·C₅H₆BrN₃O·C₄H₄ClN₃O, (IV). All five structures show R₂²(8) hydrogen‐bond‐based patterns, either by synthon 2 or by synthon 3, which are related to the Watson–Crick base pairs.     

Luminescent Amphiphilic 2,6‐Bis(1,2,3‐triazol‐4‐yl)pyridine?Platinum(II) Complexes: Synthesis,Characterization, Electrochemical,Photophysical, and Langmuir–Blodgett Film‐Formation Studies

A new series of platinum(II) complexes with tridentate ligands 2,6‐bis(1‐alkyl‐1,2,3‐triazol‐4‐yl)pyridine and 2,6‐bis(1‐aryl‐1,2,3‐triazol‐4‐yl)pyridine (N7R), [Pt(N7R)Cl]X ( 1 – 7 ) and [Pt(N7R)(C?CR′)]X ( 8 – 17 ; R=n‐C₄H₉, n‐C₈H₁₇, n‐C₁₂H₂₅, n‐C₁₄H₂₉, n‐C₁₈H₃₇, C₆H₅, and CH₂‐C₆H₅; R′=C₆H₅, C₆H₄‐CH₃‐p_, C₆H₄‐CF₃‐p, C₆H₄‐N(CH₃)₂‐p, and cholesteryl 2‐propyn‐1‐yl carbonate; X=OTf^?, PF₆^?, and Cl^?), has been synthesized and characterized. Their electrochemical and photophysical properties have also been studied. Two amphiphilic platinum(II)? 2,6‐bis(1‐dodecyl‐1,2,3‐triazol‐4‐yl)pyridine complexes ( 3‐Cl and 8 ) were found to form stable and reproducible Langmuir–Blodgett (LB) films at the air/water interface. These LB films were characterized by the study of their surface‐pressure–molecular‐area (π–A) isotherms, XRD, and IR and polarized‐IR spectroscopy.     

New quinoline‐2, ‐3, and 4‐yl‐(amino) methylphosphonates: Synthesis and study on the C?P bond cleavage in quinoline‐2 and ‐4 derivatives under acidic conditions

Synthesis of new quinoline‐(amino)methylphosphonic acids, their phosphonate esters, and phosphine oxides is presented. The desired new compounds were efficiently obtained by nucleophilic addition of phosphorous species to quinoline‐derived Schiff bases. In addition, it was discovered that heating of quinolin‐2 and quinolin‐4‐yl‐(amino)‐methylphosphonates with aqueous HCl leads to their decomposition resulting in a rupture of the C P bond, rejecting of the phosphorus containing fragment, and formation of the corresponding secondary quinoline‐2 and quinoline‐4‐alkylamines. Two alternative mechanistic pathways for this cleavage are postulated. © 2011 Wiley Periodicals, Inc. Heteroatom Chem 22:617–624, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20704     

2‐Halogeno‐1,3,2‐diazaarsolenes and 2‐halogeno‐1,3,2‐diazastibolenes: Examples for spontaneous E?X bond heterolysis or not?

2‐X‐1,3,2‐diazaarsolenes and 2‐X‐1,3,2‐ stibolenes (X = Cl, Br) were prepared from appropriate α‐amino‐aldimine precursors via transamination with ClSb(NMe₂)₂ or via base‐induced dehydrohalogenation with EX₃ (E = As, Sb). The products were further converted into 2‐iodo‐derivatives via halide exchange with Me₃SiI, or into 1,3,2‐diazaarsolenium or 1,3,2‐stibolenium salts via halide abstraction using E′X₃ (E′ = Al, Ga, Sb) or Me₃SiOTf. All compounds synthesized were characterized by spectroscopic data and several of them by single‐crystal X‐ray diffraction studies. The results of these investigations confirmed that diazaarsolenium or stibolenium cations are stabilized by similar π‐delocalization effects as the corresponding diazaphospholenium cations. 2‐Halogeno‐1,3,2‐diazaarsolenes and 2‐halogeno‐132‐stibolenes are best addressed as molecular species whose covalent E X bonds are as in 2‐chloro‐diazaphospholenes weakened by intramolecular π(C₂N₂) → σ*(E X) and, in the case of the Sb‐containing heterocycles, inter‐ molecular n(X′) → σ*(E X) hyperconjugation between the σ* (E X) orbital and a lone‐pair of electrons on the halogen atom of a neighboring molecule. Correlation of structural and spectroscopic data and the evaluation of halide transfer reactions allowed to conclude that the extent of E X bond weakening in the 2‐X‐substituted heterocycles decreases and thus the Lewis acidity of the cations increases, with increasing atomic number of the pnicogen atom. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:327–338, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20098     

Rhodium(III)‐Catalyzed ortho Alkenylation of N‐Phenoxyacetamides with N‐Tosylhydrazones or Diazoesters through C?H Activation

A coupling reaction of N‐phenoxyacetamides with N‐tosylhydrazones or diazoesters through Rh^III‐catalyzed C H activation is reported. In this reaction, ortho‐alkenyl phenols were obtained in good yields and with excellent regio‐ and stereoselectivity. Rh–carbene migratory insertion is proposed as the key step in the reaction mechanism.     

Organocatalytic Enantioselective Oxidative C?H Alkenylation and Arylation of N‐Carbamoyl Tetrahydropyridines and Tetrahydro‐β‐carbolines

The first organocatalytic enantioselective C H alkenylation and arylation reactions of N‐carbamoyl tetrahydropyridines and tetrahydro‐β‐carbolines (THCs) are described. The metal‐free processes represent an efficient and straightforward approach to a variety of structurally and electronically diverse α‐substituted tetrahydropyridines and THCs in good yields with excellent regio‐ and enantioselectivities. Preliminary control experiments provide important insights into the reaction mechanism.     

Stereochemical Models for Discussing Additions to α,β‐Unsaturated Aldehydes Organocatalyzed by Diarylprolinol or Imidazolidinone Derivatives – Is There an ‘(E)/(Z)‐Dilemma’?

The structures of iminium salts formed from diarylprolinol or imidazolidinone derivatives and α,β‐unsaturated aldehydes have been studied by X‐ray powder diffraction (Fig. 1), single‐crystal X‐ray analyses (Table 1), NMR spectroscopy (Tables 2 and 3, Figs. 2–7), and DFT calculations (Helv. Chim. Acta 2009 , 92, 1, 1225, 2010 , 93, 1; Angew. Chem., Int. Ed. 2009 , 48, 3065). Almost all iminium salts of this type exist in solution as diastereoisomeric mixtures with (E)‐ and (Z)‐configured ⁺NC bond geometries. In this study, (E)/(Z) ratios ranging from 88 : 12 up to 98 : 2 (Tables 2 and 3) and (E)/(Z) interconversions (Figs. 2–7) were observed. Furthermore, the relative rates, at which the (E)‐ and (Z)‐isomers are formed from ammonium salts and α,β‐unsaturated aldehydes, were found to differ from the (E)/(Z) equilibrium ratio in at least two cases (Figs. 4 and 5, a, and Fig. 6, a); more (Z)‐isomer is formed kinetically than corresponding to its equilibrium fraction. Given that the enantiomeric product ratios observed in reactions mediated by organocatalysts of this type are often ≥99 : 1, the (E)‐iminium‐ion intermediates are proposed to react with nucleophiles faster than the (Z)‐isomers (Scheme 5 and Fig. 8). Possible reasons for the higher reactivity of (E)‐iminium ions (Figs. 8 and 9) and for the kinetic preference of (Z)‐iminium‐ion formation are discussed (Scheme 4). The results of related density functional theory (DFT) calculations are also reported (Figs. 10–13 and Table 4).     

Can we trust the experiment? Anisotropic displacement parameters in 1‐(halomethyl)‐3‐nitrobenzene (halogen = Cl or Br)

1‐(Chloromethyl)‐3‐nitrobenzene, C₇H₆NClO₂, and 1‐(bromomethyl)‐3‐nitrobenzene, C₇H₆NBrO₂, were chosen as test compounds for benchmarking anisotropic displacement parameters (ADPs) calculated from first principles in the harmonic approximation. Crystals of these compounds are isomorphous, and theory predicted similar ADPs for both. In‐house diffraction experiments with Mo Kα radiation were in apparent contradiction to this theoretical result, with experimentally observed ADPs significantly larger for the bromo derivative. In contrast, the experimental and theoretical ADPs for the lighter congener matched reasonably well. As all usual quality indicators for both sets of experimental data were satisfactory, complementary diffraction experiments were performed at a synchrotron beamline with shorter wavelength. Refinements based on these intensity data gave very similar ADPs for both compounds and were thus in agreement with the earlier in‐house results for the chloro derivative and the predictions of theory. We speculate that strong absorption by the heavy halogen may be the reason for the observed discrepancy.     

C?C Cross‐Coupling Reactions of O6‐Alkyl‐2‐Haloinosine Derivatives and a One‐Pot Cross‐Coupling/O6‐Deprotection Procedure

Reaction conditions for the C? C cross‐coupling of O⁶‐alkyl‐2‐bromo‐ and 2‐chloroinosine derivatives with aryl‐, hetaryl‐, and alkylboronic acids were studied. Optimization experiments with silyl‐protected 2‐bromo‐O⁶‐methylinosine led to the identification of [PdCl₂(dcpf)]/K₃PO₄ in 1,4‐dioxane as the best conditions for these reactions (dcpf=1,1′‐bis(dicyclohexylphosphino)ferrocene). Attempted O⁶‐demethylation, as well as the replacement of the C‐6 methoxy group by amines, was unsuccessful, which led to the consideration of Pd‐cleavable groups such that C? C cross‐coupling and O⁶‐deprotection could be accomplished in a single step. Thus, inosine 2‐chloro‐O⁶‐allylinosine was chosen as the substrate and, after re‐evaluation of the cross‐coupling conditions with 2‐chloro‐O⁶‐methylinosine as a model substrate, one‐step C? C cross‐coupling/deprotection reactions were performed with the O⁶‐allyl analogue. These reactions are the first such examples of a one‐pot procedure for the modification and deprotection of purine nucleosides under C? C cross‐coupling conditions.     

Microwave Accelerated Polymerization of 2‐Phenyl‐2‐oxazoline: Microwave or Temperature Effects?

Summary: Investigations regarding the cationic ring‐opening polymerization of 2‐phenyl‐2‐oxazoline under microwave irradiation and conventional heating are reported. This study was inspired by contradictory reports of the (non‐)existence of non‐thermal microwave effects that might accelerate the cationic ring‐opening of 2‐oxazolines. The polymerization of 2‐phenyl‐2‐oxazoline was investigated under pressure in acetonitrile and under reflux (or at the boiling point of butyronitrile in a closed vessel) in butyronitrile utilizing a single‐mode microwave reactor and automated synthesis robots with conventional heating.

     

Practical Metal‐Free C(sp3)?H Functionalization: Construction of Structurally Diverse α‐Substituted N‐Benzyl and N‐Allyl Carbamates

Described is a practical and universal C H functionalization of readily removable N‐benzyl and N‐allyl carbamates, with a wide range of nucleophiles at ambient temperature promoted by Ph₃CClO₄. The metal‐free reaction has an excellent functional‐group tolerance, and displays a broad scope with respect to both N‐carbamates and nucleophile partners (a variety of organoboranes and C H compounds). The synthetic utility in target‐ as well as diversity‐oriented syntheses is demonstrated.