Synthesis of dendronized,chiral conjugated polymers with appendant Fréchet‐type dendrons

New chiral binaphthyl‐based polyarylenes [(S)‐ 3a and (S)‐ 3b ] with appendant Fréchet‐type poly(aryl ether) dendrons (first generation and second generation) were synthesized with Suzuki polycondensation from chiral (S)‐6,6′‐dibromo‐2,2′‐didendron‐substituted 1,1′‐binaphthyl derivatives and p‐phenylene diboronic acid. The polymers were studied with circular dichroism, fluorescence, and ultraviolet–visible spectra. Laser light scattering measurements of (S)‐ 3a and (S)‐ 3b showed that their weight‐average molecular weights were 2.39 × 10⁵ and 1.09 × 10⁴, respectively. The specific optical rotation [α]_D was ?59.6 for (S)‐ 3a and ?62.7 for (S)‐ 3b . These dendronized conjugated polymers exhibited good thermal stability. The glass‐transition temperatures and the initial decomposition temperatures were 187.5 and 265.3 °C for (S)‐ 3a and 173.8 and 308.9 °C for (S)‐ 3b , respectively. (S)‐ 3a and (S)‐ 3b had high fluorescence quantum efficiencies, 87 and 91%, respectively, in tetrahydrofuran. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1167–1172, 2002     

Dereplication of known pregnane glycosides and structural characterization of novel pregnanes in Marsdenia tenacissima by high‐performance liquid chromatography and electrospray ionization‐tandem mass spectrometry

In the search for novel natural products in plants, particularly those with potential bioactivity, it is important to efficiently distinguish novel compounds from previously isolated, known compounds, a process known as dereplication. In this study, electrospray ionization‐multiple stage tandem mass spectrometry (ESI‐MSⁿ) was used to study the behaviour of 12 pregnane glycosides and genins previously isolated from Marsdenia tenacissima, a traditional Chinese medicinal plant, as a basis for dereplication of compounds in a plant extract. In addition to [M + Na]⁺ and [M + NH₄]⁺ ions, a characteristic [M‐glycosyl + H]⁺ ion was observed in full‐scan mode with in‐source fragmentation. Sequential in‐trap collision‐induced dissociation of [M + Na]⁺ ions from 11,12‐diesters revealed consistent preferred losses of substituents first from C‐12, then from C‐11, followed by losses of monosaccharide fragments from the C‐3 tri‐ and tetrasaccharide substituents. A crude methanol extract of M. tenacissima stems was analysed using high‐performance liquid chromatography coupled to ESI‐MS. Several previously isolated pregnane glycosides were dereplicated, and the presence of an additional nine novel pregnane glycosides is predicted on the basis of the primary and fragment ions observed, including two with a previously unreported C₄H₇O C‐11/C‐12 substituent of pregnane glycosides. This study is the first report of prediction of the structures of novel pregnane glycosides in a crude plant extract by a combination of in‐source fragmentation and in‐trap collision‐induced dissociation and supports the usefulness of LC‐ESI‐MSⁿ not only for dereplication of active compounds in extracts of medicinal plants but also for detecting the presence of novel related compounds. Copyright © 2012 John Wiley & Sons, Ltd.     

Metabolism of Deuterated Isomeric 6,7‐Dihydroxydodecanoic Acids in Saccharomyces cerevisiae – Diastereo‐ and Enantioselective Formation and Characterization of 5‐Hydroxydecano‐4‐lactone (=4,5‐Dihydro‐5‐(1‐hydroxyhexyl)furan‐2(3H)‐one) Isomers

The chemical synthesis of deuterated isomeric 6,7‐dihydroxydodecanoic acid methyl esters 1 and the subsequent metabolism of esters 1 and the corresponding acids 1a in liquid cultures of the yeast Saccharomyces cerevisiae was investigated. Incubation experiments with (6R,7R)‐ or (6S,7S)‐6,7‐dihydroxy(6,7‐²H₂)dodecanoic acid methyl ester ((6R,7R)‐ or (6S,7S)‐(6,7‐²H₂)‐ 1 , resp.) and (±)‐threo‐ or (±)‐erythro‐6,7‐dihydroxy(6,7‐²H₂)dodecanoic acid ((±)‐threo‐ or (±)‐erythro‐(6,7‐²H₂)‐ 1a , resp.) elucidated their metabolic pathway in yeast (Tables 1–3). The main products were isomeric ²H‐labeled 5‐hydroxydecano‐4‐lactones 2 . The absolute configuration of the four isomeric lactones 2 was assigned by chemical synthesis via Sharpless asymmetric dihydroxylation and chiral gas chromatography (Lipodex ^® E). The enantiomers of threo‐ 2 were separated without derivatization on Lipodex ^® E; in contrast, the enantiomers of erythro‐ 2 could be separated only after transformation to their 5‐O‐(trifluoroacetyl) derivatives. Biotransformation of the methyl ester (6R,7R)‐(6,7‐²H₂)‐ 1 led to (4R,5R)‐ and (4S,5R)‐(2,5‐²H₂)‐ 2 (ratio ca. 4 : 1; Table 2). Estimation of the label content and position of (4S,5R)‐(2,5‐²H₂)‐ 2 showed 95% label at C(5), 68% label at C(2), and no ²H at C(4) (Table 2). Therefore, oxidation and subsequent reduction with inversion at C(4) of 4,5‐dihydroxydecanoic acid and transfer of ²H from C(4) to C(2) is postulated. The 5‐hydroxydecano‐4‐lactones 2 are of biochemical importance: during the fermentation of Streptomyces griseus, (4S,5R)‐ 2 , known as L‐factor, occurs temporarily before the antibiotic production, and (?)‐muricatacin (=(4R,5R)‐5‐hydroxy‐heptadecano‐4‐lactone), a homologue of (4R,5R)‐ 2 , is an anticancer agent.     

Synthesis and NMR characterization of 6‐Phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose

Cellulose ( 1 ) was converted for the first time to 6‐phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 6 ) in 33% overall yield. Intermediates in the five‐step conversion of 1 to­ 6 were: 6‐O‐tritylcellulose ( 2 ), 6‐O‐trityl‐2,3‐di‐O‐methylcellulose ( 3 ), 2,3‐di‐O‐methylcellulose ( 4 ); and 6‐bromo‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 5 ). Elemental and quantitative carbon‐13 analyses were concurrently used to verify and confirm the degrees of substitution in each new polymer. Gel permeation chromotography (GPC) data were generated to monitor the changes in molecular weight (DP_w) as the synthesis progressed, and the compound average decrease in cellulose DP_w was ～ 27%. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the decomposition of all polymers. The degradation temperatures ( °C) and percent char at 500 °C of cellulose derivatives 2 to 6 were 308.6 and 6.3%, 227.6 °C and 9.7%, 273.9 °C and 30.2%, 200.4 °C and 25.6%, and 207.2 °C and 27.0%, respectively. The glass transition temperature (T_g) of­6‐O‐tritylcellulose by dynamic mechanical analysis (DMA) occurred at 126.7 °C and the modulus (E′, Pa) dropped 8.9 fold in the transition from ?150 °C to + 180 °C (6.6 × 10⁹ to 7.4 × 10⁸ Pa). Modulus at 20 °C was 3.26 × 10⁹ Pa. Complete proton and carbon‐13 chemical shift assignments of the repeating unit of the title polymer were made by a combination of the HMQC and COSY NMR methods. Ultimate non‐destructive proof of carbon–carbon bond formation at C6 of the anhydroglucose moiety was established by generating correlations between resonances of CH₂6 (anhydroglucose) and C1′, H2′, and H6′ of the attached aryl ring using the heteronuclear multiple‐bond correlation (HMBC) method. In this study, we achieved three major objectives: (a) new methodologies for the chemical modification of cellulose were developed; (b) new cellulose derivatives were designed, prepared and characterized; (c) unequivocal structural proof for carbon–carbon bond formation with cellulose was derived non‐destructively by use of one‐ and two‐dimensional NMR methods. Copyright © 2002 John Wiley & Sons, Ltd.     

Mechanism and kinetics of the imidazolidinone nitroxide‐mediated free‐radical polymerization of styrene

Styrene radical polymerizations mediated by the imidazolidinone nitroxides 2,5‐bis(spirocyclohexyl)‐3‐methylimidazolidin‐4‐one‐1‐oxyl (NO88Me) and 2,5‐bis(spirocyclohexyl)‐3‐benzylimidazolidin‐4‐one‐1‐oxyl (NO88Bn) were investigated. Polymeric alkoxyamine (PS‐NO88Bn)‐initiated systems exhibited controlled/living characteristics at 100–120 °C but not at 80 °C. All systems exhibited rates of polymerization similar to those of thermal polymerization, with the exception of the PS‐NO88Bn system at 80 °C, which polymerized twice as quickly. The dissociation rate constants (k_d) for the PS‐NO88Me and PS‐NO88Bn coupling products were determined by electron spin resonance at 50–100 °C. The equilibrium constants were estimated to be 9.01 × 10^?11 and 6.47 × 10^?11 mol L^?1 at 120 °C for NO88Me and NO88Bn, respectively, resulting in the combination rate constants (k_c) 2.77 × 10⁶ (NO88Me) and 2.07 × 10⁶ L mol^?1 s^?1 (NO88Bn). The similar polymerization results and kinetic parameters for NO88Me and NO88Bn indicated the absence of any 3‐N‐transannular effect by the benzyl substituent relative to the methyl substituent. The values of k_d and k_c were 4–8 and 25–33 times lower, respectively, than the reported values for PS‐TEMPO at 120 °C, indicating that the 2,5‐spirodicyclohexyl rings have a more profound effect on the combination reaction rather than the dissociation reaction. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 327–334, 2003     

Ethylene polymerization with long‐lifetime monopendant thienyl‐substituted group 4 metallocenes

A series of group 4 metallocenes (RCp)[Cp―(bridge)―(2‐C₄H₃S)]MCl₂ [M = Ti ( C1 , C2 , C3 , C4 ); M = Zr ( C5 , C6 , C7 , C8 )] bearing a pendant thiophene group on a cyclopentadienyl ring have been synthesized, characterized and tested as catalyst precursors for ethylene polymerization. The molecular structures of representative titanocenes C2 and C4 were confirmed by single‐crystal X‐ray diffraction and revealed that both complexes exist in an expected coordination environment for a monomeric bent metallocene. No intramolecular coordination between the thiophene group and the titanium center could be observed in the solid state. Upon activation by methylaluminoxane (MAO), titanocenes C1 , C2 , C3 , C4 showed moderate catalytic activities and produced high‐ or ultra‐high‐molecular‐weight polyethylene (M_v 70.5–227.1 × 10⁴ g mol^?1). Titanocene C3 is more active and long‐lived, with a lifetime of nearly 9 h at 30 °C. At elevated temperatures of 80–110 °C, zirconocenes C5 , C6 , C7 , C8 displayed high catalytic activities (up to 27.6 × 10⁵ g PE (mol Zr)^?1 h^?1), giving high‐molecular‐weight polyethylene (M_v 11.2–53.7 × 10⁴ g mol^?1). Even at 80 °C, a long lifetime of at least 2 h was observed for the C8/MAO catalyst system. Copyright © 2014 John Wiley & Sons, Ltd.     

Photoisomerization and Emission Properties of trans‐ and cis‐Poly(dimethylsilylenephenylenevinylene)s

The photoirradiation of trans‐ and cis‐poly(dimethylsilylenephenylenevinylene)s gave cis‐rich mixtures at equilibrium states. The degree of the photoisomerization could be exactly evaluated by comparing the UV spectra of the photoirradiated solutions with those of the trans and cis polymers. The geometric configuration of the trans and cis polymers was thermally stable and hardly changed even though they were heated. The trans and cis polymers exhibited different emission properties; e.g., trans polymer: λ_max = 400 nm, quantum yield = 3.4×10^–3; cis polymer: λ_max = 380 nm, quantum yield = 1.5×10^–3.     

Flavonoids Isolated from Heat‐Processed Epimedium koreanum and Their Anti‐HIV‐1 Activities

Systematic phytochemical investigation on heat‐processed Epimedium koreanum led to the isolation of 13 flavonoids, including five new prenyl‐flavonol glycosides, koreanosides A–E ( 1 – 5 , resp.). Their structures were elucidated on the basis of detailed analysis of the 1D‐ and 2D‐NMR spectroscopic data and chemical reactions. Apigenin ( 11 ) exhibited moderate anti‐HIV‐1 activity with an EC₅₀ value of 12.8±3.27 μg/ml.     

Synthesis of 1‐Methyl‐3‐aryl‐substituted Titanocene and Zirconocene Dichlorides and Crystal Structure of Bis[η5‐1‐methyl‐3‐(α, α‐dimethylbenzyl) cyclopentadienyl] titanium Dichloride

The syntheses of a series of l‐methyl‐3‐aryl‐substituted titanocene and zirconocene dichlorides are reported. These complexes are synthesized by the reaction of 2‐ and 3‐methyl‐6, 6‐dimethylfulvenes (1:4) with aryllithium, followed by the reaction with TiCl₄·2THF, ZrCl₄ and (CpTiCl₂)₂O respectively, to give complexes 1–5. The complex [η⁵‐1‐methyl‐3‐(α, α‐dimethylbenzyl) cyclopentadienyl] titanium dichloride has been studied by X‐ray diffraction. The red crystal of this complex is monoclinic, space group P2_t/C with unit cell parameters: a =6.973(6) × 10^?1 nm, b =36.91(2) × 10^?1 nm, c = 10.063(4) × 10^?1 nm, α=β= γ = 93.35(5)°, V = 2584(5) × 10^?3 nm³ and Z = 4. Refinement for 1004 observed reflections gives the final R of 0.088. There are four independent molecules per unit cell.     

Pd(II) complexes bearing di‐ and monochelate fluorinated β‐ketonaphthyliminato ligand and their catalytic properties towards vinyl‐addition polymerization and copolymerization of norbornene and ester‐functionalized norbornene derivative

Fluorinated β‐ketonaphthyliminate ligand CF₃C(O)CHC[HN(naphthyl)]CH₃ ( L1 ) and Pd(II) complexes with dichelate fluorinated β‐ketonaphthyliminato ligand, {CF₃C(O)CHC[N(naphthyl)]CH₃}₂Pd ( C1 ), as well as with monochelate fluorinated β‐ketonaphthyliminato ligand, {CF₃C(O)CHC[N(naphthyl)]CH₃}Pd(CH₃)(PPh₃) ( C2 ), were synthesized and their solid‐state structures were confirmed using X‐ray crystallographic analysis. The Pd(II) complexes were employed as precursors to catalyze norbornene (NB) homo‐ and copolymerization with ester‐functionalized NB derivative using B(C₆F₅)₃ as a co‐catalyst. High activity up to 2.3 × 10⁵ g_polymer mol_Pd^?1 h^?1 for the C1 /B(C₆F₅)₃ system and 3.4 × 10⁶ g_polymer mol_Pd^?1 h^?1 for the C2 /B(C₆F₅)₃ system was exhibited in NB homopolymerization. Moreover, the Pd(II) complexes exhibited a high level of tolerance towards the ester‐functionalized MB monomer. In comparison with the C1 /B(C₆F₅)₃ system, the C2 /B(C₆F₅)₃ system exhibited better catalytic property towards the copolymerization of NB with 5‐norbornene‐2‐carboxylic acid methyl ester (NB‐COOCH₃), and soluble vinyl‐addition‐type copolymers were obtained with relatively high molecular weights (3.6 × 10⁴–7.5 × 10⁴ g mol^?1) as well as narrow molecular weight distributions (1.49–2.15) depending on the variation of monomer feed ratios. The NB‐COOCH₃ insertion ratio in all copolymers could be controlled in the range 2.8–21.0 mol% by tuning a content of 10–50 mol% NB‐COOCH₃ in the monomer feed ratios. Copolymerization kinetics were expressed by the NB and NB‐COOCH₃ monomer reactivity ratios: r_NB‐COOCH3 = 0.18, r_NB = 1.28 were determined for the C1 /B(C₆F₅)₃ system and r_NB‐COOCH3 = 0.19, r_NB = 3.57 for the C2 /B(C₆F₅)₃ system using the Kelen–Tüdõs method. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and Nonlinear Optical Properties of a New A-π-A Two-Photon Compound Utilizing Dibenzothiophene as Center

A new two‐photon material, 3E,6E‐bis(2‐pyrid‐4′‐ylvinyl)dibenzothiophene (BPVDBT), has been firstly synthesized by an efficient Pd‐catalyzed Heck coupling route. The single‐ and two‐photon fluorescence, quantum yields, lifetimes, solvent effects of the chromophore were studied in detail and the compound exhibited solvent‐sensitivity. The fluorescence intensity (I_out) and input excitation intensity (I_in) can fit in well with the quadratic parabolas, which indicates that the up‐converted fluorescence was induced by the two‐photon absorption (TPA). TPA cross‐section of BPVDBT has been measured using the two‐photon‐induced fluorescence method, whose value is 14.24×10^?50 cm⁴·s·photon^?1·molecule^?1 at 750 nm. The experimental results confirm that BPVDBT is a good two‐photon absorbing chromophore with an A‐π‐A type.     

A Novel BODIPY‐Based Low‐Band‐Gap Small‐Molecule Acceptor for Efficient Non‐fullerene Polymer Solar Cells

We report herein an efficient A¹‐C≡C‐A²‐C≡C‐A¹ type small‐molecule 4,4'‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐ indacene (BODIPY) acceptor (A¹=BODIPY and A²=diketopyrrolopyrrole (DPP)) by following the A‐to‐A excited electron delocalization via the BODIPY meso ‐position, the inherent directionality for the excited electron delocalization. The lowest unoccupied molecular orbital (LUMO) delocalizes across over whole the two flanking A¹ and the central A², and the highest occupied molecular orbital (HOMO) localizes dominantly on the ‐C≡C‐DPP‐C≡C‐ segment. The excited electron upon light excitation of the DPP segment delocalizes over both the BODIPY and DPP segments. The acceptor in chloroform shows an unprecedented plateau‐like broad absorption between 550 and 700 nm with a large FWHM value of 195 nm. Upon transition into solid film, the acceptor shows absorption in the whole near ultraviolet‐visible‐near infrared wavelength region (300‐830 nm) with a low band gap of 1.5 eV and a maximum absorptivity of 0.85×10⁵ cm^‐1. Introduction of the ethynyl spacer between the A¹ and A² and the close BODIPY‐to‐DPP LUMO energy levels are crucial for the excited π−electron delocalization across over whole the conjugation backbone. A power conversion efficiency of 6.60% was obtained from the ternary non‐fullerene solar cell with PTB7‐Th:p ‐DTS(FBTTh₂)₂ (0.5 : 0.5) as the donor materials, which is the highest value among the non‐fullerene organic solar cells with BODIPY as the electron acceptor material.     

Simultaneous determination of six C21 steroids of Xiao‐Ai‐Ping injection in rat plasma by LC‐MS/MS

Xiao‐Ai‐Ping injection (XAPI) is a traditional Chinese medicine that has been widely used to treat cancer. Modern pharmacological studies have demonstrated that C₂₁ steroids are the main active compounds in XAPI. In this study, a sensitive and specific liquid chromatography tandem mass spectrometry (LC‐MS/MS) method was developed and validated the first time for simultanenous determination of three isomeric pregnane genins (17β‐tenacigenin B, tenacigenin B and tenacigenin A) and their corresponding glycosides (tenacigenoside A, tenacissoside F and marsdenoside I) from XAPI in rat plasma. A simple liquid–liquid extraction technique was used after the addition of dexamethasone acetate as internal standard. The chromatography separation of analytes was achieved on an Agilent Zorbax Eclipse XDB‐C₁₈ column (3.5 µm, 150 × 3 mm i.d.) using methanol–water as mobile phase in a gradient elution program. Detection was performed in multiple reaction monitoring mode using electrospray ionization in the negative ion mode. The method showed satisfactory linearity over a concentration range 5.00–2000.00 ng/mL for tenacigenin B, tenacigenin A, marsdenoside I and tenacissoside F (r² > 0.99), 10.00–4000.00 ng/mL for 17β‐tenacigenin B and tenacigenoside A (r² > 0.99). Intra‐ and inter‐day precisions (valued as relative standard deviation) were <9.00% and accuracies (as relative error) in the range ?6.31 to 7.23%. Finally, this validated method was successfully applied to the pharmacokinetic study of XAPI after intravenous administration to rats. Copyright © 2013 John Wiley & Sons, Ltd.     

Three Arene‐Ru(II) compounds of 2‐halogen‐5‐aminopyridine: Synthesis,characterization, and cytotoxicity

Three novel compounds, (η⁶‐p‐cymene)RuCl₂(2‐fluoro‐5‐aminopyridine) (compound 1), (η⁶‐p‐cymene)RuCl₂(5‐amino‐2‐chlorpyridine) (compound 2) and (η⁶‐p‐cymene)RuCl₂(2‐bromo‐ 5‐aminopyridine) (compound 3), were synthesized and characterized. The compound 1 and 3 were determined by X‐ray diffraction, showing a distorted piano‐stool type of geometry with similar bond lengths and angles around the ruthenium. Compound 2 exhibited moderate in vitro activity against A549 and MCF‐7 human cancer cells, the other two lower activities. The UV–vis and fluorescent absorption titrations showed that three compounds binded with CT‐DNA in a minor groove. The intrinsic binding constants (Kb) were calculated to be 2.13(±0.03) × 10⁵ M^?1, 2.89(±0.03) × 10⁵ M^?1 and 2.45(±0.03) × 10⁵ M^?1 for compound 1, 2 and 3, respectively, by using UV–vis absorption titrations data. Among the three compound, the highest value of intrinsic binding constant of compound 2 was consistent with its highest cytoxicity against A549 and MCF‐7 human cancer cells in vitro.     

NLO‐active maleimide copolymers with ­high glass transition temperatures

We synthesized some novel rigid NLO‐active maleimide copolymers bearing DR‐1 moieties ( PMPD , PHSD and PHND ). All copolymers exhibited high T_g's (190～197 °C), good solubilities for common solvents and excellent film‐forming properties. Dependence of film thickness on the d₃₃ value for the poled copolymer films induced by corona poling was investigated and it was demonstrated that in less than thickness of 0.3 µm decrease of the thickness gives rise to remarkable increase in the d₃₃ value. The poled copolymer films exhibited large d₃₃ values (270 × 10^?9 esu (film thickness 0.13 µm) for PMPD , 290 × 10^?9 esu (0.12 µm) for PHSD and 350 × 10^?9 esu (0.08 µm) for PHND ) as well as large r₃₃ values (51.0 pmV^?1 for PMPD and 60.4 pmV^?1 for PHND ) which are significantly large compared to the value of LiNbO₃ (31 pmV^?1) as a typical EO material. The d₃₃ values of the poled copolymers were kept constant even after standing 1000h at 80 °C, although a small decrease was observed at an initial stage. Further, the d₃₃ values did not change up to ca. 123 °C upon heating at the rate of 10 °C/min in all cases. Copyright © 2002 John Wiley & Sons, Ltd.     

Direct Simultaneous Determination of α‐ and β‐Naphthol Isomers at GC‐Electrode Modified with CNTs Network Joined by Pt Nanoparticles Through Derivative Voltammetry

The semi‐derivative technique was adopted to improve the resolution and surfactant was added to sample solution to enhance the sensitivity, α‐ and β‐naphthol isomers could be determined directly and simultaneously at glassy carbon electrode modified with carbon nanotubes network joined by Pt nanoparticles. In 0.1 mol L^?1 HAc‐NaAc buffer solution (pH 5.8), the linear calibration ranges were 1.0×10^?6 to 8.0×10^?4 mol L^?1 for both α‐ and β‐naphthols, with detection limits of 5.0×10^?7 for α‐ and 6.0×10^?7 mol L^?1 for β‐naphthol. The amount of naphthol isomers in artificial wastewater has been tested with above method, and the recovery was from 98% to 103%.     

Polymerization and copolymerization of functionalized 2‐alkoxy‐1‐methylenecyclopropanes to form new polymers having alkoxy substituents

The polymers with functionalized alkoxy groups and with narrow molecular weight distribution (M_w/M_n < 1.12) are obtained from the living polymerization of 2‐alkoxy‐1‐methylenecyclopropanes using π‐allylpalladium complex, [(PhC₃H₄)Pd(μ‐Cl)]₂, as the initiator. The polymers with oligoethylene glycol groups in the alkoxy substituent are soluble in water, and hydroboration of the C?C double bond and ensuing addition of the OH groups to C?N bond of alkyl isocyanate produce the polymers with urethane pendant groups. The reaction decreases solubility of the polymer in water significantly. Di‐ and triblock copolymers of the 2‐alkoxy‐1‐methylenecyclopropanes are prepared by consecutive addition of the two or three 2‐alkoxy‐1‐methylenecyclopropane monomers to the Pd initiator. The polymers which contain both hydrophobic butoxy or tert‐butoxy group and hydrophilic oligoethylene glycol group dissolve in water and/or organic solvents, depending on the substituents. The ¹H NMR spectrum of poly( 1a ‐b‐ 1h ) (? (CH₂C(?CH₂)CHOBu)_n? (CH₂C(?CH₂)CH(OCH₂CH₂)₃OMe)_m? ) in D₂O solution exhibits peaks because of the butoxy and ?CH₂ hydrogen in decreased intensity, indicating that the polymer forms micelle particles containing the hydrophilic segments in their external parts. Aqueous solution of the polymer with a small amount of DPH (DPH = 1,6‐diphenyl‐1,3,5‐hexatriene) shows the absorbance due to DPH at concentration of the polymer higher than 5.82 × 10^?5 g mL^?1. Other block copolymers such as poly( 1b ‐b‐ 1h ) and poly( 1a ‐b‐ 1g ) also form the micelles that contain DPH in their core. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 959–972, 2009     

Synthesis and UCST‐type phase behavior of OEGylated poly(γ‐benzyl‐l‐glutamate) in organic media

A series of OEGylated poly(γ‐benzyl‐l ‐glutamate) with different oligo‐ethylene‐glycol side‐chain length, molecular weight (MW = 8.4 × 10³ to 13.5 × 10⁴) and narrow molecular weight distribution (PDI = 1.12–1.19) can be readily prepared from triethylamine initiated ring‐opening polymerization of OEGylated γ‐benzyl‐l ‐glutamic acid based N‐carboxyanhydride. FTIR analysis revealed that the polymers adopted α‐helical conformation in the solid‐state. While they showed poor solubility in water, they exhibited a reversible upper critical solution temperature (UCST)‐type phase behavior in various alcoholic organic solvents (i.e., methanol, ethanol, 1‐propanol, 1‐butanol, 1‐pentanol, and isopropanol). Variable‐temperature UV–vis analysis revealed that the UCST‐type transition temperatures (T_pts) of the resulting polymers were highly dependent on the type of solvent, polymer concentration, side‐ and main‐chain length. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1348‐1356     

Homo‐ and copolymerization of norbornene and 5‐norbornene‐2‐yl acetate with bis‐(β‐ketonaphthylamino)palladium(II)/B(C6F5)3 catalytic system

The polymerization of norbornene with bis(β‐ketonaphthylamino) palladium(II), Pd{CH₃C(O)CHC[N(naphthyl)]CH₃}₂, in combination with tris(pentafluorophenyl)borane (B(C₆F₅)₃), was investigated by varying the B:Pd(II) molar ratio, monomer concentration, reaction temperature, and time. The catalytic activity was found to reach 2.8 × 10⁴ gPolymer/(molPd^?h) and the obtained polynorbornene (PNBE) was confirmed to be vinyl addition polymer and showed good thermo‐stability (T_dec > 350°C), but exhibited poor solubility in organic solvents due to the relative higher stereo regularity. Pd{CH₃C(O)CHC[N(naphthyl)]CH₃}₂/B(C₆F₅)₃ system is also an active catalyst for copolymerization of norbornene and 5‐norbornene‐2‐yl acetate (NBE‐OCOCH₃) in toluene with moderate yields (in 9.2–36.5% yields) and produces the addition‐type copolymer with relatively high molecular weights (0.96 × 10⁴–2.13 × 10⁴ g/mol). The incorporation of functional group in the copolymer can be controlled up to 0.9–23.5 mol% by varying the NBE‐OCOCH₃ monomer feed ratios from 10 to 90%. The copolymers are proved to be noncrystalline and show good solubility in common organic solvents and excellent thermal stability up to 350°C. Copyright © 2011 John Wiley & Sons, Ltd.     

Kinetics and mechanism of gas‐phase pyrolysis of N‐aryl‐3‐oxobutanamide ketoanilides,their 2‐arylhydrazono derivatives,and related compounds

Rates and products of reaction and Arrhenius activation parameters were determined for the gas‐phase thermolysis of 14 substrates of the title compounds using sealed pyrex reactor tubes and HPLC/UV‐VIS to monitor substrate pyrolysis. The 14 compounds under study are N‐phenyl‐3‐oxo‐ ( 1 ), N‐(p‐chlorophenyl)‐3‐oxo‐ ( 2 ), N‐(p‐methylphenyl)‐3‐oxo‐ ( 3 ), and N‐(p‐methoxyphenyl)‐3‐oxobutanamide ( 4 ), in addition to (i) four substrates ( 5–8 ) obtained by the replacement of the pairs of methylene hydrogens at the 2‐position of compounds ( 1–4 ), each pair by a phenylhydrazono group; (ii) three arylhydrazono derivatives ( 9–11 ) in which Cl, CH₃, or OCH₃ groups are substituted at the para position of the phenylhydrazono moiety of compound 5 ; (iii) 3‐oxobutanamide (acetoacetamide, 12 ), N‐phenyl‐3‐oxo‐3‐phenylpropanamide ( 13 ), and N,N′‐diphenylpropanediamide ( 14 ). The reactions were conducted over 374–546 K temperature range, and the values of the Arrhenius log A(s^?1) and E_a(kJ mol^?1) of these reactions were, respectively, 12.0 ± 2.0 and 119.2 ± 17.0 for the ketoanilides ( 1–4, 12–14 ), and 13.0 ± 0.7 and 157.5 ± 8.6 for the arylhyrazono compounds ( 5–11 ). Kinetically, the arylhydrazono derivatives were found to be ca. 1.4 × 10³ to 5.7 × 10³ times less reactive than the parent ketoanilides. A mechanism is proposed to account for reaction products and to rationalize molecular reactivities. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 39: 82–91, 2007