ToF‐SIMS characterization of glyoxal surface oxidation products by hydrogen peroxide: A comparison between dry and liquid samples

As one of the simplest volatile organic compounds, glyoxal and its oxidation products were considered to be important precursors to aqueous secondary organic aerosol formation. Herein, we analyzed products from glyoxal oxidation by hydrogen peroxide in dry and liquid samples using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). ToF‐SIMS spectra and spectral principal component analysis (PCA) were used to investigate surface oxidation products. Dry samples were prepared on clean silicon wafers. Liquid samples consisting of glyoxal and hydrogen peroxide (H₂O₂) were introduced to a vacuum compatible microfluidic reactor prior to UV illumination or dark aging followed by in situ liquid SIMS analysis. A number of reaction products were observed in both dry and liquid samples; different oligomers and carboxylic acids could be formed depending on reaction conditions. In addition, hydrolyzed products were observed in the liquid samples, but not in the dry samples. Although dry samples reveal some products of the aqueous process, they are not fully representative as results from those of the aqueous samples. Our findings suggest that the ability to characterize the liquid surface reaction products provides more realistic information of the reaction products associated with aqueous secondary organic aerosol formation in the atmosphere. Meanwhile, the high mass resolution spectra from the dry sample SIMS measurement are helpful to identify oxidation products in the liquid samples.     

Application of a solvent‐free solid injection technique coupled with GC–MS for discrimination between the secondary metabolites of wild and cultivated South Korean medicinal foods

Solvent‐free solid injection was applied to differentiate between wild and cultivated South Korean medicinal foods, including dureup (Aralia elata ), deodeok (Codonopsis lanceolata ) and doraji (Platycodon grandiflorus ). A number of compounds were identified in wild and cultivated dureup (53 and 46), deodeok (47 and 51) and doraji (43 and 38). Secondary metabolites, including butanal,2‐methyl‐, β ‐caryophyllene, neoclovene, α ‐humulene, γ ‐curcumene, β ‐bisabolene, and phytol, were identified in dureup with significantly (P < 0.05) different amounts between both types. In deodeok, squalene and other main components such as acetic acid, methyl ester, furan‐methyl‐furfural, 2‐furan‐methanol, and 5‐methyl‐furfural, were statistically different between the two types. Doraji has significantly different compounds such as furfural, 5‐methyl‐furfural, 2‐methoxy‐phenol, 2‐methoxy‐4‐(1‐propenyl)‐phenol, and 1‐(4‐hydroxy‐3‐methoxyphenyl)‐2‐propanone. Although we failed to confirm the key compounds, a new compound, namely desaspidinol, was synthesized for the first time and its retention index determined under the experimental conditions. This solventless, easy technique can be used as a simple way to discriminate between wild and cultivated types of medicinal plants via identification of volatile markers or specific fingerprints.     

ToF‐SIMS and computation analysis: Fragmentation mechanisms of polystyrene,polystyrene‐d5, and polypentafluorostyrene

We studied the time‐of‐flight secondary ion mass spectrometry fragmentation mechanisms of polystyrenes—phenyl‐fluorinated polystyrene (5FPS), phenyl‐deuterated polystyrene (5DPS), and hydrogenated polystyrene (PS). From the positive ion spectra of 5FPS, we identified some characteristic molecular ion structures with isomeric geometries such as benzylic, benzocyclobutene, benzocyclopentene, cyclopentane, and tropylium systems. These structures were evaluated by the B3LYP‐D/jun‐cc‐pVDZ computation method. The intensities of the C₇H₂F₅⁺ (m/z = 181), CyPent‐C₉H₃F₄⁺ (m/z = 187), CyPent‐C₉H₄F₅⁺ (m/z = 207), and CyPent‐C₉H₂F₅⁺ (m/z = 205) ions were enhanced by resonance stabilization. The positive fluorinated ions from 5FPS tended to rearrange and produce fewer fluorine‐containing molecular ions through the loss of F (m/z = 19), CF (m/z = 31), and CF₂ (m/z = 50) ion fragments. Consequently, the fluorine‐containing polycyclic aromatic ions had much lower intensities than their hydrocarbon counterparts. We propose the fragmentation mechanisms for the formation of C₅H₅⁺, C₆H₅⁺, and C₇H₇⁺ ion fragments, substantiated with detailed analyses of the negative ion spectra. These ions were created through elimination of a pentafluoro‐phenyl anion (C₆F₅⁻) and H⁺, followed by a 1‐electron‐transfer process and then cyclization of the newly generated polyene with carbon‐carbon bond formation. The pendant groups with elements of different electronegativities exerted strong influences on the intensities and fragmentation processes of their corresponding ions.     

Rapid multivariate analysis of 3D ToF‐SIMS data: graphical processor units (GPUs) and low‐discrepancy subsampling for large‐scale principal component analysis

Principal component analysis (PCA) and other multivariate analysis methods have been used increasingly to analyse and understand depth‐profiles in XPS, AES and SIMS. For large images or three‐dimensional (3D) imaging depth‐profiles, PCA has been difficult to apply until now simply because of the size of the matrices of data involved. In a recent paper, we described two algorithms, random vector 1 (RV1) and random vector 2 (RV2), that improve the speed of PCA and allow datasets of unlimited size, respectively. In this paper, we now apply the RV2 algorithm to perform PCA on full 3D time‐of‐flight SIMS data for the first time without subsampling. The dataset we process in this way is a 128 × 128 pixel depth‐profile of 120 layers, each voxel having a 70 439 value mass spectrum associated with it. This forms over a terabyte of data when uncompressed and took 27 h to process using the RV2 algorithm using a conventional windows desktop personal computer (PC). While full PCA (e.g. using RV2) is to be preferred for final reports or publications, a much more rapid method is needed during analysis sessions to inform decisions on the next analytical step. We have therefore implemented the RV1 algorithm on a PC having a graphical processor unit (GPU) card containing 2880 individual processor cores. This increases the speed of calculation by a factor of around 4.1 compared with what is possible using a fast commercially available desktop PC having central processing units alone, and full PCA is performed in less than 7 s. The size of the dataset that can be processed in this way is limited by the size of the memory on the GPU card. This is typically sufficient for two‐dimensional images but not 3D depth‐profiles without sampling. We have therefore examined efficient sampling schemes that allow a good approximate solution to the PCA problem for large 3D datasets. We find that low‐discrepancy series such as Sobol series sampling gives more rapid convergence than random sampling, and we recommend such methods for routine use. Using the GPU and low‐discrepancy series together, we anticipate that any time‐of‐flight SIMS dataset, of whatever size, can be efficiently and accurately processed into PCA components in a maximum of around 10 s using a commercial PC with a widely available GPU card, although the longer RV2 approach is still to be preferred for the presentation of final results, such as in published papers. Copyright © 2016 The Authors Surface and Interface Analysis Published by John Wiley & Sons Ltd     

Studies on the metabolism of the Δ9‐tetrahydrocannabinol precursor Δ9‐tetrahydrocannabinolic acid A (Δ9‐THCA‐A) in rat using LC‐MS/MS,LC‐QTOF MS and GC‐MS techniques

In Cannabis sativa, Δ9‐Tetrahydrocannabinolic acid‐A (Δ9‐THCA‐A) is the non‐psychoactive precursor of Δ9‐tetrahydrocannabinol (Δ9‐THC). In fresh plant material, about 90% of the total Δ9‐THC is available as Δ9‐THCA‐A. When heated (smoked or baked), Δ9‐THCA‐A is only partially converted to Δ9‐THC and therefore, Δ9‐THCA‐A can be detected in serum and urine of cannabis consumers. The aim of the presented study was to identify the metabolites of Δ9‐THCA‐A and to examine particularly whether oral intake of Δ9‐THCA‐A leads to in vivo formation of Δ9‐THC in a rat model. After oral application of pure Δ9‐THCA‐A to rats (15 mg/kg body mass), urine samples were collected and metabolites were isolated and identified by liquid chromatography‐mass spectrometry (LC‐MS), liquid chromatography‐tandem mass spectrometry (LC‐MS/MS) and high resolution LC‐MS using time of flight‐mass spectrometry (TOF‐MS) for accurate mass measurement. For detection of Δ9‐THC and its metabolites, urine extracts were analyzed by gas chromatography‐mass spectrometry (GC‐MS). The identified metabolites show that Δ9‐THCA‐A undergoes a hydroxylation in position 11 to 11‐hydroxy‐Δ9‐tetrahydrocannabinolic acid‐A (11‐OH‐Δ9‐THCA‐A), which is further oxidized via the intermediate aldehyde 11‐oxo‐Δ9‐THCA‐A to 11‐nor‐9‐carboxy‐Δ9‐tetrahydrocannabinolic acid‐A (Δ9‐THCA‐A‐COOH). Glucuronides of the parent compound and both main metabolites were identified in the rat urine as well. Furthermore, Δ9‐THCA‐A undergoes hydroxylation in position 8 to 8‐alpha‐ and 8‐beta‐hydroxy‐Δ9‐tetrahydrocannabinolic acid‐A, respectively, (8α‐Hydroxy‐Δ9‐THCA‐A and 8β‐Hydroxy‐Δ9‐THCA‐A, respectively) followed by dehydration. Both monohydroxylated metabolites were further oxidized to their bishydroxylated forms. Several glucuronidation conjugates of these metabolites were identified. In vivo conversion of Δ9‐THCA‐A to Δ9‐THC was not observed. Copyright © 2009 John Wiley & Sons, Ltd.     

Production of Long‐Chain Branched Polyolefins with Two Single‐Site Catalysts: Comparing CSTR and Semi‐Batch Performance

We developed a mathematical model to describe the solution polymerization of olefins with two single‐site catalysts in a series of two CSTRs. The model was used to simulate processes where semi‐crystalline macromonomers produced in the first reactor are incorporated as long chain branches onto amorphous (or lower crystallinity) chains in the second reactor (cross‐products). The simulation results show that CSTRs are more efficient to make chains with high LCB density and high weight percent of cross‐products. The model can also predict the polydispersity index, average chain lengths, and fractions of the different polymer populations, and help the polymer reactor engineer formulate new products with complex microstructures.

     

Development and validation of a LC‐MS/MS method for the in vitro analysis of 1‐hydroxymidazolam in human liver microsomes: application for determining CYP3A4 inhibition in complex matrix mixtures

Complementary and alternative medicines (CAM) can affect the pharmacokinetics of anticancer drugs by interacting with the metabolizing enzyme cytochrome P450 (CYP) 3A4. To evaluate changes in the activity of CYP3A4 in patients, levels of 1‐hydroxymidazolam in plasma are often determined with liquid chromatography–quadrupole mass spectrometry (LC‐MS/MS). However, validated LC‐MS/MS methods to determine in vitro CYP3A4 inhibition in human liver microsomes are scarce and not optimized for evaluating CYP3A4 inhibition by CAM. The latter is necessary because CAM are often complex mixtures of numerous compounds that can interfere with the selective measurement of 1‐hydroxymidazolam. Therefore, the aim was to validate and optimize an LC‐MS/MS method for the adequate determination of CYP3A4 inhibition by CAM in human liver microsomes. After incubation of human liver microsomes with midazolam, liquid–liquid extraction with tert‐butyl methyl ether was applied and dried samples were reconstituted in 50% methanol. These samples were injected onto a reversed‐phase chromatography consisting of a Zorbax Extend‐C₁₈ column (2.1 × 150 mm, 5.0 µm particle size), connected to a triple quadrupole mass spectrometer with electrospray ionization. The described LC‐MS/MS method was validated over linear range of 1.0–500 nm for 1‐hydroxymidazolam. The results revealed good inter‐assay accuracy (≥85% and ≤115%) and within‐day and between‐day precisions (coefficient of variation ≤ 4.43%). Furthermore, the applicability of this assay for the determination of CYP3A4 inhibition in complex matrix mixtures was successfully demonstrated in an in vitro experiment in which CYP3A4 inhibition by known CAM (β‐carotene, green tea, milk thistle and St. John's wort) was determined. Copyright © 2013 John Wiley & Sons, Ltd.     

Six‐coordinated vanadium(IV) complexes with tridentate task‐specific ionic liquid Schiff base ligands: Synthesis,characterization and effect of ionic nature on catalytic activity

By reaction of 5‐(chloromethyl)salicylaldehyde with triphenylphosphine and N‐methylimidazole in two separate reactions, salicylaldehydetriphenylphosphonium chloride (S²) and salicylaldehydemethylimidazolinium chloride (S³) were prepared. Reaction of 2‐(aminomethyl)pyridine with these aldehydes resulted in the task‐specific ionic liquid Schiff base ligands L¹ and L², respectively. Then six‐coordinated vanadium(IV) Schiff base complexes of VO(acac)L^1–4 were synthesized by reactions of these tridentate Schiff base ligands and VO(acac)₂ in 1:1 stoichiometry. The aldehydes, ligands and VO(acac)L^1–4 complexes were characterized using infrared, ¹H NMR, ¹³C NMR, ³¹P NMR, UV–visible and mass spectroscopies, as well as elemental analysis. Paramagnetic property of the complexes was also studied using magnetic susceptibility measurements. The complexes were used as catalysts in epoxidation of cyclooctene and oxidation of methylphenyl sulfide and the reaction parameters were optimized. The effect of the ionic nature of the complexes was investigated in these oxidation reactions. The catalytic activity of the complexes could be varied by changing the ionic (cationic or anionic) character of VO(acac)L^1–4 catalysts in which counter anion variation showed a greater effect than cationic moiety variation.     

Kinetics of the chromium(III)/l‐glutamic acid complexation reaction: Formation,decay, and UV‐vis spectrum of a long‐lived intermediate

The kinetics of the aqueous reaction of Cr(III) with either l ‐glutamic acid or sodium hydrogen l ‐glutamate at pH 2.46‐5.87 have been followed by means of absorbance readings. The rate of formation of the reaction products showed acceleration‐deceleration periods, caused by the accumulation and posterior decay of an intermediate in nonnegligible concentration. A double‐exponential integrated rate law allowed obtaining two rate constants for each absorbance‐time experimental series, associated with the appearance (k₁) and decay (k₂) of the long‐lived intermediate. An increase of the initial concentrations of either hydrogen l ‐glutamate (apparent kinetic orders < 1) or hydroxide (kinetic orders = 1) ions resulted in an increase of both k₁ and k₂, but addition of an inert electrolyte (KNO₃) resulted in opposite effects on k₁ (decrease) and k₂ (increase). The experimental activation energies were 83 ± 10 (for k₁) and 95 ± 5 (for k₂) kJ mol⁻¹. The electronic spectrum of the low reactivity detected intermediate resembled more closely to that of the blue/green reactant than that of the violet reaction product. The low number of protons set free by the complexating hydrogen l ‐glutamate ligand seems to suggest that some polymerization of the coordinated amino acid (to form a di‐ or tripeptide) might take place. The available experimental data indicate that the coordination of the organic ligand must be preceded by the breakdown of a strong Cr(III)–H₂O chemical bond in the slow steps of the mechanism.     

Ab initio study of the mechanism of forming a spiro‐heterocyclic ring compound involving Si and Ge from dichlorosilylene germylidene(Cl2SiGe:) and formaldehyde

The mechanism of the cycloaddition reaction between singlet dichlorosilylene germylidene (Cl₂Si?Ge:) and formaldehyde has been investigated with the CCSD(T)//MP2/6‐31G* method. From the potential energy profile, it could be predicted that the reaction has one dominant reaction pathway. The reaction rule presented is that the two reactants first form a four‐membered Si‐heterocyclic ring germylene through the [2 + 2] cycloaddition reaction. Because of the 4p unoccupied orbital of Ge atom in the four‐membered Si‐heterocyclic ring germylene and the π orbital of formaldehyde forming a π→p donor–acceptor bond, the four‐membered Si‐heterocyclic ring germylene further combines with formaldehyde to form an intermediate. Because the Ge atom in intermediate undergoes sp3 hybridization after transition state, then, the intermediate isomerizes to a spiro‐heterocyclic ring compound involving Si and Ge via a transition state. © 2012 Wiley Periodicals, Inc.     

Synthesis of tadpole polymers via triple click reactions: Copper‐catalyzed azide–alkyne cycloaddition,diels–alder,and nitroxide radical coupling reactions

We designed a trifunctional initiator ( 3 ) containing anthracene, bromide, and OH functionalities and subsequently used as an initiator in atom transfer radical Polymerization (ATRP) of styrene to yield linear polystyrene (PS) with α‐anthracene, OH, and ω‐bromide terminal groups, of which bromide is later transformed into azide to result in the linear anthracene‐, OH‐, and azide‐terminated PS (l‐α‐anthracene‐OH‐ω‐azide‐PS). The copper‐catalyzed azide–alkyne cycloaddition reaction between l‐α‐anthracene‐OH‐ω‐azide‐PS and α‐furan‐protected‐maleimide‐ω‐alkyne linkage, 4 afforded the linear anthracene‐, OH‐, and maleimide‐terminated PS. The cyclization via intramolecular Diels–Alder click reaction of this linear PS and the subsequent conversion of the hydroxyl into bromide resulted in the cyclic PS with one bromide located on the ring, (c‐PS)‐Br. Finally, the c‐PS‐Br was clicked with either well‐defined tetramethylpiperidine‐1‐oxyl‐terminated poly(ethylene glycol) (PEG) or poly(ε‐caprolactone) (PCL) yielding the tadpole polymer, (c‐PS)‐b‐PEG or (c‐PS)‐b‐PCL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Structure Investigation of Bridgehead Aziridine: Synthesis,Theoretical, and Crystallographic Study of 2,4,6‐Triphenyl‐1,3‐diazabicyclo[3.1.0]hex‐3‐ene

A one‐pot three‐component procedure to efficiently create the 1,3‐diazabicyclo[3.1.0]hex‐3‐ene system is reported. The molecular structure of 2,4,6‐triphenyl‐1,3‐diazabicyclo[3.1.0]hex‐3‐ene ( 3 ) was studied by X‐ray diffraction and compared to ab initio and density‐functional‐theory (DFT) calculations restricted to the core moiety. Geometry optimizations for structural isomers and tautomeric forms of this aziridine fragment, taken as simplified models, were carried out at high calculation levels. Moreover, the same methods were utilized to evaluate the proton affinity of two crucial aziridine tautomers.     

Large tensile deformation behavior of oriented high‐density polyethylene: A correlation between cavitation and lamellar fragmentation

Oriented high‐density polyethylene (HDPE), prepared by melt extrusion drawing, has been employed to address the correlation between cavitation and lamellar fragmentation at large strain. This has been done by investigating the volume strain, elastic recovery properties, and microscopic morphology. The results indicate that the reversible volume strain becomes saturation at a true strain of about 0.3, which is essentially consistent with the critical one related to lamellar fragmentation (point C). Morphological observations on the deformed samples provide structural insights into above deformation behaviors. Enlarged voids are hard to recover due to dominant plastic deformation of crystals once lamellar fragmentation sets in and thus a transition of reversible volume strain with strain is presented. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1202–1206, 2008     

Reaction of oligoalcohols with diepoxides: An easy,one‐pot way to star‐shaped,multibranched polymers. II. Poly(ethylene oxide) stars—synthesis and analysis by size exclusion chromatography triple‐detection method

An Erratum has been published for this article in Journal of Polymer Science Part A: Polymer Chemistry (2004) 42(10) 2575‐2576 Starlike, highly branched (A_xB_yA_z) macromolecules having from a few to 100 arms and molar masses up to 10⁵ were prepared in three stages with the one‐pot, arms‐core‐arms method (B_y stands for y molcules of former diepoxides introduced into the core). Oligoalcohols, at least partially converted into their alcoholate counterpart states, reacted with diepoxy compounds giving star‐shaped, highly branched macromolecules. With the properly chosen conditions, complete conversion of both starting components was achieved. In this article homostars built with the first and second generation of poly(ethylene oxide) arms (A_x and A_z, respectively) are described. The number of arms (f) was determined either by direct measurements of the number‐average molcular weight (M_n) of the first and second stars (M_n of arms A_x and A_z is known) or by calculating f from branching indices g and g′ determined from the radius of gyration and the limited viscosity number measured with size exclusion chromatography (SEC) triple detection with TriSEC software. For a few samples, M_n was measured with high‐speed membrane osmometry. The progress of the stars' formation was monitored by ¹H NMR, SEC, and matrix‐assisted laser desorption/ionization time‐of‐flight methods. Functionalization of the ? OH end groups in the second generation of arms was observed by ¹H and/or ³¹P NMR. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1576–1598, 2004     

Chemistry of transition‐metal complexes containing functionalized phosphines: synthesis and structural analysis of rhodium(I) complexes containing allyl and cyanoalkylphosphines

A series of related acetylacetonate–carbonyl–rhodium compounds substituted by functionalized phosphines has been prepared in good to excellent yields by the reaction of [Rh(acac)(CO)₂] (acac is acetylacetonate) with the corresponding allyl‐, cyanomethyl‐ or cyanoethyl‐substituted phosphines. All compounds were fully characterized by ³¹P, ¹H, ¹³C NMR and IR spectroscopy. The X‐ray structures of (acetylacetonato‐κ²O,O′)(tert‐butylphosphanedicarbonitrile‐κP)carbonylrhodium(I), [Rh(C₅H₇O₂)(CO)(C₈H₁₃N₂)] or [Rh(acac)(CO)(^tBuP(CH₂CN)₂}] ( 2b ), (acetylacetonato‐κ²O,O′)carbonyl[3‐(diphenylphosphanyl)propanenitrile‐κP]rhodium(I), [Rh(C₅H₇O₂)(C₁₅H₁₄N)(CO)] or [Rh(acac)(CO){Ph₂P(CH₂CH₂CN)}] ( 2h ), and (acetylacetonato‐κ²O,O′)carbonyl[3‐(di‐tert‐butylphosphanyl)propanenitrile‐κP]rhodium(I), [Rh(C₅H₇O₂)(C₁₁H₂₂N)(CO)] or [Rh(acac)(CO){^tBu₂P(CH₂CH₂CN)}] ( 2i ), showed a square‐planar geometry around the Rh atom with a significant trans influence over the acetylacetonate moiety, evidenced by long Rh—O bond lengths as expected for poor π‐acceptor phosphines. The Rh—P distances displayed an inverse linear dependence with the coupling constants J_P‐Rh and the IR ν(C[triple‐bond]O) bands, which accounts for the Rh—P electronic bonding feature (poor π‐acceptors) of these complexes. A combined study from density functional theory (DFT) calculations and an evaluation of the intramolecular H…Rh contacts from X‐ray diffraction data allowed a comparison of the conformational preferences of these complexes in the solid state versus the isolated compounds in the gas phase. For 2b , 2h and 2i , an energy‐framework study evidenced that the crystal structures are mainly governed by dispersive energy. In fact, strong pairwise molecular dispersive interactions are responsible for the columnar arrangement observed in these complexes. A Hirshfeld surface analysis employing three‐dimensional molecular surface contours and two‐dimensional fingerprint plots indicated that the structures are stabilized by H…H, C…H, H…O, H…N and H…Rh intermolecular interactions.     

Michael Polanyi and the discovery of co‐catalysis: Discussion of an autobiographical letter from Michael Polanyi,FRS to Peter H. Plesch of 17 December 1963

The origin of this memoir was a letter from Michael Polanyi (M. P.) to the present writer (P. H. P.) about their researches in the mid‐1940s into the mechanism of what are now called cationic polymerizations, at the University of Manchester (England). M. P. analyzes his tactics and the mistakes made in directing this research. When the Manchester‐trained researchers made little progress with what was a very recalcitrant problem, M. P. thinking that scientists from a different background might be more sucessful, got P. H. P., from Cambridge, to work with an Oxford‐trained chemist. They recognized that the likely cause of the irreproducibility of these polymerizations was the apparatus used which permitted access of atmospheric moisture to the reaction mixtures containing the moisture‐sensitive catalytic metal halides. Because the only method for following the very fast polymerizations was by monitoring the accompanying temperature rise, and the reactions had to be done below ambient temperature, the reaction vessel needed to be adiabatic, that is a Dewar (Thermos) flask; hence the problem of how to cool its contents. The solution was P. H. P.'s invention of the pseudo‐Dewar vessel, the Dewar space of which, instead of being evacuated permanently, could be filled with air or evacuated. This device permitted the reaction mixture to be made up and cooled, and the reactions to be started without contact with the atmosphere. Thus it was found that isobutene polymerizations, which had stopped unaccountably, could be restarted by water vapor. P. H. P. termed water a “co‐catalyst”. The consequent “Manchester” theory recognized the monohydrate of TiCl₄ as a protonic acid and saw the initiation as due to the protonation of the monomer, with the formation of a tert‐carbenium ion, and these ions, formed repetitively, became the propagating species. The Manchester theory was rapidly accepted because it could also explain observations on other related reactions. The involvement of ions established a link with non‐aqueous electrochemistry. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1537–1546, 2004