A Novel ‘Domino‐Click Approach’ to Unsymmetrical Bis‐1H‐1,2,3‐triazoles

Aryl azides 1 were treated with allenylmagnesium bromide ( 2 ) to generate 1,5‐disubstituted butynyl‐1H‐1,2,3‐triazoles 3 in a domino fashion, which upon Cu^I‐catalyzed 1,3‐dipolar cycloaddition with aryl azides 4 afforded novel bis‐1H‐1,2,3‐triazoles 5 in quantitative yields (Scheme 1 and Table).     

A New,Fast and Easy Strategy for One‐pot Synthesis of Full Substituted Cyclopropanes: Direct Transformation of Aldehydes to 3‐Aryl‐1,1,2,2‐tetracyanocyclopropanes

A new, fast and easy method for one‐pot reaction of aromatic aldehydes and dialdehydes with malononitrile and cyanogen bromide has been developed to afford full substituted 3‐arylcyclopropane‐1,1,2,2‐tetracarbonitriles in excellent yields in very short time (about 5 seconds). The structures elucidations werev characterized by IR, ¹H NMR, ¹³C NMR, mass spectrometry and X‐ray crystallography techniques. For vthese compounds the crystallographic data showed two structures in mirror image in solid case and one distinct structure in solution. The reaction mechanism was discussed.     

Nanomagnetic‐supported Sulfonic Acid: Simple and Rapid Method for the Synthesis of α,α′‐Bis‐(substituted‐benzylidene) Cycloalkanones

Nanomagnetic‐supported sulfonic acid is found to be a powerful and reusable heterogeneous catalyst for the rapid synthesis of α,α′‐bis‐(substituted‐benzylidene)cycloalkanones under conventional heating and solvent free conditions. High yield, simple work up and easy recovery of the catalyst are the most obvious advantages of this procedure.     

Functional Ionic Liquids Promoted Double Michael Reaction of Benzofuran‐3‐one or 1‐Indone and Symmetric Dienones: Construction of Spiro[benzofuran‐2,1’‐cyclohexane]‐3‐one or Spiro[cyclohexane‐1,2’‐indene]‐1’,4(3’H)‐dione Derivatives

The double Michael reactions between benzofuran‐3‐one or 1‐indone and symmetric dienones in the presence of catalytic ionic liquids were successfully developed and spiro[benzofuran‐2,1’‐cyclohexane]‐3‐one or spiro[cyclohexane‐1,2’‐indene]‐1’,4(3’H )‐dione derivatives containing a spiro quaternary stereogenic center, which widely exist in biologically active products and building blocks in organic synthesis, were obtained in excellent yields (up to 99%). This catalytic system was also extended to the double Michael reaction of less reactive 1‐indone and the desired products were also obtained in 31%‐62% yields. The catalytic system was highly active and efficient for a broad of substrates under mild conditions.     

Ionic Liquid as an Efficient Promoting Medium for Synthesis of Bis‐Pyrazolo[3,4‐b:4′,3′‐e]Pyridines

The preparation of a series of bis‐pyrazolo[3,4‐b:4′,3′‐e]pyridines by the reaction of 5‐aminopyrazole with aldehydes in ionic liquid [bmim]Br is described. This new method has the advantages of easier work‐up, milder reaction conditions, high yields and environmental friendliness compared with other methods.     

Gallotannins and Tannic Acid: First Chemical Syntheses and In Vitro Inhibitory Activity on Alzheimer’s Amyloid β‐Peptide Aggregation

The screening of natural products in the search for new lead compounds against Alzheimer’s disease has unveiled several plant polyphenols that are capable of inhibiting the formation of toxic β‐amyloid fibrils. Gallic acid based gallotannins are among these polyphenols, but their antifibrillogenic activity has thus far been examined using “tannic acid”, a commercial mixture of gallotannins and other galloylated glucopyranoses. The first total syntheses of two true gallotannins, a hexagalloylglucopyranose and a decagalloylated compound whose structure is commonly used to depict “tannic acid”, are now described. These depsidic gallotannins and simpler galloylated glucose derivatives all inhibit amyloid β‐peptide (Aβ) aggregation in vitro, and monogalloylated α‐glucogallin and a natural β‐hexagalloylglucose are shown to be the strongest inhibitors.     

Synthesis of Bis‐Thiazolidinones Using Chitosan‐attached Nano‐CuFe2O4 as an Efficient and Retrievable Heterogeneous Catalyst

The preparation of bis‐thiazolidinones has been achieved by a one‐pot condensation reaction of araldehydes, ethylenediamine, and 2‐mercaptoacetic acid in the presence of nano‐CuFe₂O₄@chitosan under reflux conditions in toluene. The catalyst was characterized by powder X‐ray diffraction (XRD), scanning electronic microscopy (SEM), vibrating sample magnetometer (VSM) measurements, thermal gravimetric analysis (TGA), and FT‐IR spectroscopy. This method provides several advantages including excellent yields, wide range of products, reusability of the catalyst, and a low amount of the catalyst.     

Unusually Large Young’s Moduli of Amino Acid Molecular Crystals

Young’s moduli of selected amino acid molecular crystals were studied both experimentally and computationally using nanoindentation and dispersion‐corrected density functional theory. The Young modulus is found to be strongly facet‐dependent, with some facets exhibiting exceptionally high values (as large as 44 GPa). The magnitude of Young’s modulus is strongly correlated with the relative orientation between the underlying hydrogen‐bonding network and the measured facet. Furthermore, we show computationally that the Young modulus can be as large as 70–90 GPa if facets perpendicular to the primary direction of the hydrogen‐bonding network can be stabilized. This value is remarkably high for a molecular solid and suggests the design of hydrogen‐bond networks as a route for rational design of ultra‐stiff molecular solids.     

Synthesis,Structure, and Characterization of 3, 4′‐Bis‐1H‐1, 2,4‐triazolium Picrate Salt: A New High‐Energy Density Material

The environmentally friendly high‐energy density salt (TRTR)(PA) (TRTR = 3, 4′‐bis‐1, 2,4‐1H‐triazole, PA = 2, 4,6‐trinitrophenol, picric acid) was synthesized and characterized. The X‐ray single crystal diffraction results illustrate that the structure of title salt belongs to the monoclinic system, space group P2₁/c. Many parallel relationships exist in the molecule, as well as a strong intramolecular π–π stacking interaction. The DSC result shows only one exothermal decomposition step at 229.1 °C. The TG‐DTG curve demonstrates a 75.9 % mass loss from 180 °C to 300 °C at a rate of 3.01 % · K^–1. Experimental data show that the combustion heat approximately equals to TNT (–15.22 MJ · kg^–1) and the enthalpy of formation is +332.2 kJ · mol^–1. Non–isothermal kinetic and thermodynamic parameters were obtained by two methods (Kissinger and Ozawa). Detonation pressure and velocity were calculated to be 23.4 GPa and 7.32 km · s^–1, respectively. Additionally, the sensitivities towards impact and friction were assessed with relevant standard methods.     

Solid‐State NMR Characterization of Wilkinson’s Catalyst Immobilized in Mesoporous SBA‐3 Silica

The Wilkinson’s catalyst [RhCl(PPh₃)₃] has been immobilized inside the pores of amine functionalized mesoporous silica material SBA‐3 and The structure of the modified silica surface and the immobilized rhodium complex was determined by a combination of different solid‐state NMR methods. The successful modification of the silica surface was confirmed by ²⁹Si CP‐MAS NMR experiments. The presence of the T_n peaks confirms the successful functionalization of the support and shows the way of binding the organic groups to the surface of the mesopores. ³¹P‐³¹P J‐resolved 2D MAS NMR experiments were conducted in order to characterize the binding of the immobilized catalyst to the amine groups of the linkers attached to the silica surface. The pure catalyst exhibits a considerable ³¹P‐³¹P J‐coupling, well resolvable in 2D MAS NMR experiments. This J‐coupling was utilized to determine the binding mode of the catalyst to the linkers on the silica surface and the number of triphenylphosphine ligands that are replaced by coordination bonds to the amine groups. From the absence of any resolvable ³¹P‐³¹P J‐coupling in off‐magic‐angle‐spinning experiments, as well as slow‐spinning MAS experiments, it is concluded, that two triphenylphosphine ligands are replaced and that the catalyst is bonded to the silica surface through two linker molecules.     

Highly Enantioselective Synthesis of 1,2,3‐Substituted Cyclopropanes by Using α‐Iodo‐ and α‐Chloromethylzinc Carbenoids

Herein, we report the enantio‐ and diastereoselective formation of trans‐iodo‐ and trans‐chlorocyclopropanes from α‐iodo‐ and α‐chlorozinc carbenoids by using a dioxaborolane‐derived chiral ligand. The synthetically useful iodocyclopropane building blocks were derivatized by an electrophilic trapping of the corresponding cyclopropyl lithium species or a Negishi coupling to give access to a variety of enantioenriched 1,2,3‐substituted cyclopropanes. The synthetic utility of this method was demonstrated by the formal synthesis of an HIV‐1 protease inhibitor. In addition, the related stereoselective bromocyclopropanation was also investigated. New insights about the relative electrophilicity of haloiodomethylzinc carbenoids are also presented.     

Enantioselective Divergent Synthesis of (−)‐cis‐α‐ and (−)‐cis‐γ‐Irone by Using Wilkinson’s Catalyst

A simple, efficient synthesis is reported for (?)‐cis‐α‐ and (?)‐cis‐γ‐irone, two precious constituents of iris oils, in ≥99 % diastereomeric and enantioselective ratios. The two routes diverge from a common intermediate prepared from (?)‐epoxygeraniol. Of general interest in this approach is the installation of the enone moiety of irones through a NHC?Au^I‐catalyzed Meyer–Schuster‐like rearrangement of a propargylic benzoate and the use of Wilkinson’s catalyst for the stereoselective hydrogenation of a prostereogenic exocyclic double bond to secure the critical cis stereochemistry of the alkyl groups at C2 and C6 of the irones. The stereochemical aspects of this reaction are rationally supported by DFT calculation of the conformers of the substrates undergoing the hydrogenation and by a modeling study of the geometry of the rhodium η² complexes involved in the diastereodifferentiation of the double bond faces. Thus, computational investigation of the η² intermediates formed in the catalytic cycle of prostereogenic alkene hydrogenation by using Wilkinson’s catalyst could be highly predictive of the stereochemistry of the products.     

Syntheses,Characterization, and Electrochemical Lithium‐Ion Storage Properties of Two Cobalt(II) Coordination Polymers Containing 5‐Hydroxyisophthalic Acid and Bis‐benzoimidazole Ligands

Two cobalt(II) coordination polymers, namely {[Co(HO‐BDC)(bbe)] · (H₂O)}_n ( 1 ), and {[Co(O‐BDC)(bbp)] · (H₂O)}_n ( 2 ) (HO‐H₂BDC = 5‐hydroxyisophthalic acid, bbe = 1, 2‐bis(benzoimidazol‐2‐yl)ethane, and bbp = 1, 3‐bis(benzoimidazol‐2‐yl)propane) were synthesized under hydrothermal conditions, and characterized by elemental analyses, IR spectroscopy, single‐crystal X‐ray diffraction, and thermogravimetric analyses. Compound 1 is a 1D chain, whereas 2 is a (3, 3)‐connected 2D network with (6³) topology. These two 1D and 2D complexes are further connected by hydrogen bonds to form the 3D supramolecular architectures. The electrochemical lithium‐ion storage properties of the as‐made Co₃O₄ by calcination of 1 are investigated in detail.     

Synthesis of a Targeted Library of Heparan Sulfate Hexa‐ to Dodecasaccharides as Inhibitors of β‐Secretase: Potential Therapeutics for Alzheimer’s Disease

Heparan sulfates (HS) are a class of sulfated polysaccharides that function as dynamic biological regulators of the functions of diverse proteins. The structural basis of these interactions, however, remains elusive, and chemical synthesis of defined structures represents a challenging but powerful approach for unravelling the structure–activity relationships of their complex sulfation patterns. HS has been shown to function as an inhibitor of the β‐site cleaving enzyme β‐secretase (BACE1), a protease responsible for generating the toxic Aβ peptides that accumulate in Alzheimer’s disease (AD), with 6‐O‐sulfation identified as a key requirement. Here, we demonstrate a novel generic synthetic approach to HS oligosaccharides applied to production of a library of 16 hexa‐ to dodecasaccharides targeted at BACE1 inhibition. Screening of this library provided new insights into structure–activity relationships for optimal BACE1 inhibition, and yielded a number of potent non‐anticoagulant BACE1 inhibitors with potential for development as leads for treatment of AD through lowering of Aβ peptide levels.     

Facile Solid‐Phase Organic Synthesis of 5‐Vinyl‐Substituted 1,2,4‐Oxadiazoles from Polymer‐Bound α‐Selenopropionic Acid

Cyclocondensation of polystyrene‐supported α‐selenopropionic acid with amidoximes in the presence of 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride (EDC) followed by oxidative deselenation efficiently afforded 5‐vinyl 1,2,4‐oxadiazoles in good yield and purity with a facile work‐up procedure.     

A Facile Synthesis of Bridged Polycyclic Naphthooxazocine Skeletons: Eight‐Membered‐Ring Constructions via Tandem Dinucleophilic Addition of Naphthalenols to Quinolinium Salts

The efficient synthesis of bridged polycyclic naphthooxazocines 3 via addition of naphthalenols 1 as a bis‐nucleophile to N‐alkylquinolinium salts 2 is described (Scheme 1 and Table 2). This new approach provides a powerful entry into polycyclic structures containing bicyclic N,O‐acetals related to bioactive compounds.     

Convenient Synthesis of Functionalized Bis‐ureidopyrimidinones Based on Thiol‐yne Reaction

The preparation of functionalized bis‐ureidopyrimidinones ( Bis‐UPy ) through the thiol‐yne reaction is described. Various Bis‐UPys with different functional groups were synthesized by using the readily available functionalized alkynes and UPy‐thiol to affirm the simplicity and versatility of the methodology.     

Selective Synthesis of 6′‐Arylidene‐1‐aryl‐3‐aryl‐spiro[pyrrolizidine‐2,2′‐cyclohexanone] by Cycloaddition of Azomethine Ylides to Dibenzylidene Cyclohexanone

Azomethine ylides derived in situ from l ‐proline and aryl aldehydes underwent regioselective and stereoselective cycloadditions with diaryl cycloahexanone to form a series of spiro‐pyrrolizidine compounds. By using equimolar proportions of the reactants in DMF, only a single mono‐adduct, namely 6′‐arylidene‐1‐aryl‐3‐aryl‐spiro[pyrrolizidine‐2,2′‐cyclohexanone], was formed, the second double bond in the dipolarophile remaining unaffected. Structure elucidation was achieved by detailed spectroscopic analyses and XRD studies. Interesting solid‐state structural characteristics were revealed by XRD analysis.     

The ‘Azirine/Oxazolone Approach’ to the Synthesis of Aib‐Pro Endothiopeptides

The reaction of methyl N‐(2,2‐dimethyl‐2H‐azirin‐3‐yl)‐L ‐prolinate ( 2a ) with thiobenzoic acid at room temperature gave the endothiopeptide Bz‐AibΨ[CS]‐Pro‐OMe ( 7 ) in high yield. In an analogous manner, (benzyloxy)carbonyl (Z)‐protected proline was transformed into the thioacid, which was reacted with 2a to give the endothiotripeptide Z‐Pro‐AibΨ[CS]‐Pro‐OMe ( 12 ). The corresponding thioacid of 7 was prepared in situ via saponification, formation of a mixed anhydride, and treatment with H₂S. A second reaction with 2a led to the endodithiotetrapeptide 9 , but extensive epimerization at Pro² was observed. Similarly, saponification of 12 and coupling with either 2a or H‐Phe‐OMe and 2‐(1H‐benzotriazol‐1‐yl)‐1,1,3,3‐tetramethyluronium tetrafluoroborate/1‐hydroxy‐1H‐benzotriazole (TBTU/HOBt) gave the corresponding endothiopeptides as mixtures of two epimers. The synthesis of the pure diastereoisomer BzΨ[CS]‐Aib‐Pro‐AibΨ[CS]‐N(Me)Ph ( 21 ) was achieved via isomerization of 7 to BzΨ[CS]‐Aib‐Pro‐OMe ( 16 ), transformation into the corresponding thioacid, and reaction with N,2,2‐trimethyl‐N‐phenyl‐2H‐azirin‐3‐amine ( 1a ). The structures of 12 and 21 were established by X‐ray crystallography.