Structure and reactivity of V(2)O(5): bulk solid, nanosized clusters, species supported on silica and alumina, cluster cations and anions

Vanadyl bond dissociation energies are calculated by density functional theory (DFT). While the hybrid (B3LYP) functional results are close to the available reference data, gradient corrected functionals (BP86, PBE) yield large errors (about 50 to 100 kJ mol(-1)), but reproduce trends correctly. PBE calculations on a V(20)O(62)H(24) cluster model for the (001) surface of V(2)O(5) crystals virtually reproduce periodic slab calculations. The low bond dissociation energy (formation of oxygen surface defect) of 113 kJ mol(-1)(B3LYP) is due to substantial structure relaxations leading to formation of V-O-V bonds between the V(2)O(5) layers of the crystal. This relaxation cannot occur in polyhedral (V(2)O(5))(n) clusters and also not for V(2)O(5) species supported on silica or alumina (represented by cage-type models) for which bond dissociation energies of 250-300 kJ mol(-1) are calculated. The OV(OCH(3))(3) molecule and its dimer are also considered. Radical cations V(2)O(5)(+) and V(4)O(10)(+) have very low bond dissociation energies (22 and 14 kJ mol(-1), respectively), while the corresponding radical anions have higher dissociation energies (about 330 kJ mol(-1)) than the neutral clusters. The bond dissociation energies of the closed shell V(3)O(7)(+) cation (165 kJ mol(-1)) and the closed shell V(3)O(8)(-) anion (283 kJ mol(-1)) are closest to the values of the neutral clusters. This makes them suitable for gas phase studies which aim at comparisons with V(2)O(5) species on supporting oxides.     

Increasing stability of the fullerenes with the number of carbon atoms: the experimental evidence

The values of the molar standard enthalpies of formation, Delta(f)H(o)(m)(C(76), cr) = (2705.6 +/- 37.7) kJ x mol(-1), Delta(f)H(o)(m)(C(78), cr) = (2766.5 +/- 36.7) kJ x mol(-1), and Delta(f)H(o)(m)(C(84), cr) = (2826.6 +/- 42.6) kJ x mol(-1), were determined from the energies of combustion, measured by microcombustion calorimetry on a high-purity sample of the D(2) isomer of fullerene C(76), as well as on a mixture of the two most abundant constitutional isomers of C(78) (C(2nu)-C(78) and D(3)-C(78)) and C(84) (D(2)-C(84), and D(2d)-C(84). These values, combined with the published data on the enthalpies of sublimation of each cluster, lead to the gas-phase enthalpies of formation, Delta(f)H(o)(m)(C(76), g) = (2911.6 +/- 37.9) kJ x mol(-1); Delta(f)H(o)(m)(C(78), g) = (2979.3 +/- 37.2) kJ x mol(-1), and Delta(f)H(o)(m)(C(84), (g)) = (3051.6 +/- 43.0) kJ x mol(-1), results that were found to compare well with those reported from density functional theory calculations. Values of enthalpies of atomization, strain energies, and the average C-C bond energy were also derived for each fullerene. A decreasing trend in the gas-phase enthalpy of formation and strain energy per carbon atom as the size of the cluster increases is found. This is the first experimental evidence that these fullerenes become more stable as they become larger. The derived experimental average C-C bond energy E(C-C) = 461.04 kJ x mol(-1) for fullerenes is close to the average bond energy E(C-C) = 462.8 kJ x mol(-1) for polycyclic aromatic hydrocarbons (PAHs).     

Direct determination of the ionization energies of PtC, PtO, and PtO2 with VUV radiation

Photoionization efficiency curves were measured for gas-phase PtC, PtO, and PtO2 using tunable vacuum ultraviolet (VUV) radiation at the Advanced Light Source. The molecules were prepared by laser ablation of a platinum tube, followed by reaction with CH4 or N2O and supersonic expansion. These measurements provide the first directly measured ionization energy for PtC, IE(PtC) = 9.45 +/- 0.05 eV. The direct measurement also gives greatly improved ionization energies for the platinum oxides, IE(PtO) = 10.0 +/- 0.1 eV and IE(PtO2) = 11.35 +/- 0.05 eV. The ionization energy connects the dissociation energies of the neutral and cation, leading to greatly improved 0 K bond dissociation energies for the neutrals: D0(Pt-C) = 5.95 +/- 0.07 eV, D0(Pt-O) = 4.30 +/- 0.12 eV, and D0(OPt-O) = 4.41 +/- 0.13 eV, as well as enthalpies of formation for the gas-phase molecules DeltaH(0)(f,0)(PtC(g)) = 701 +/- 7 kJ/mol, DeltaH(0)(f,0)(PtO(g)) = 396 +/- 12 kJ/mol, and DeltaH(0)(f,0)(PtO2(g)) = 218 +/- 11 kJ/mol. Much of the error in previous Knudsen cell measurements of platinum oxide bond dissociation energies is due to the use of thermodynamic second law extrapolations. Third law values calculated using statistical mechanical thermodynamic functions are in much better agreement with values obtained from ionization energies and ion energetics. These experiments demonstrate that laser ablation production with direct VUV ionization measurements is a versatile tool to measure ionization energies and bond dissociation energies for catalytically interesting species such as metal oxides and carbides.     

The dissociation kinetics of energy-selected CpMn(CO)(3)(+) ions studied by threshold photoelectron-photoion coincidence spectroscopy

Threshold photoelectron-photoion coincidence spectroscopy has been used to investigate the dissociation kinetics of the cyclopentadienyl manganese tricarbonyl ion, CpMn(CO)(3)(+). The ionization energy of CpMn(CO)(3) was measured from the threshold photoelectron spectrum to be 7.69 +/- 0.02 eV. The dissociation of the CpMn(CO)(3)(+) ion proceeds by the sequential loss of three CO molecules. The first and third CO loss reactions were observed to be slow (lifetimes in the microsecond range). By simulating the resulting asymmetric time-of-flight peak shapes and breakdown diagram, 0 K onsets for three product ions were determined to be 8.80 +/- 0.04, 9.43 +/- 0.04, and 10.51 +/- 0.06 eV, respectively. Combined with the adiabatic ionization energy, the three successive Mn-CO bond energies in the CpMn(CO)(3)(+) were found to be alternating with values of 1.11 +/- 0.04, 0.63 +/- 0.04, and 1.08 +/- 0.06 eV, respectively. Using a scaled theoretical Cp-Mn(+) bond energy of 3.10 +/- 0.10 eV and the combined results from theory and experiment, the 298 K gas-phase heat of formation of CpMn(CO)(3) is suggested to be -419 +/- 15 kJ/mol. Based on this value, the 298 K heats of formation of CpMn(CO)(3)(+), CpMn(CO)(2)(+), CpMnCO(+), and CpMn(+) are 325 +/- 15, 546 +/- 15, 719 +/- 15, and 938 +/- 15 kJ/mol, respectively. By scaling theoretical calculated neutral bond energies with the experimental information derived in this study, the successive Mn-CO bond energies were estimated to be 1.88, 1.10, and 1.03 eV, respectively, while the Cp-Mn bond energy was found to be 2.16 eV. Comparison between the quantum chemical calculations and experimental values shows that the loss of CO groups follows the lowest energy adiabatic path, in which electronic spin on the metal center is not conserved.     

Energetics of hydroxybenzoic acids and of the corresponding carboxyphenoxyl radicals. Intramolecular hydrogen bonding in 2-hydroxybenzoic acid

The energetics of the phenolic O-H bond in the three hydroxybenzoic acid isomers and of the intramolecular hydrogen O-H- - -O-C bond in 2-hydroxybenzoic acid, 2-OHBA, were investigated by using a combination of experimental and theoretical methods. The standard molar enthalpies of formation of monoclinic 3- and 4-hydroxybenzoic acids, at 298.15 K, were determined as Delta(f)(3-OHBA, cr) = -593.9 +/- 2.0 kJ x mol(-1) and Delta(f)(4-OHBA, cr) = -597.2 +/- 1.4 kJ x mol(-1), by combustion calorimetry. Calvet drop-sublimation calorimetric measurements on monoclinic samples of 2-, 3-, and 4-OHBA, led to the following enthalpy of sublimation values at 298.15 K: Delta(sub)(2-OHBA) = 94.4 +/- 0.4 kJ x mol(-1), Delta(sub)(3-OHBA) = 118.3 +/- 1.1 kJ x mol(-1), and Delta(sub)(4-OHBA) = 117.0 +/- 0.5 kJ x mol(-1). From the obtained Delta(f)(cr) and Delta(sub) values and the previously reported enthalpy of formation of monoclinic 2-OHBA (-591.7 +/- 1.3 kJ x mol(-1)), it was possible to derive Delta(f)(2-OHBA, g) = -497.3 +/- 1.4 kJ x mol(-1), Delta(f)(3-OHBA, g) = -475.6 +/- 2.3 kJ x mol(-1), and Delta(f)(4-OHBA, cr) = -480.2 +/- 1.5 kJ x mol(-1). These values, together with the enthalpies of isodesmic and isogyric gas-phase reactions predicted by density functional theory (B3PW91/aug-cc-pVDZ, MPW1PW91/aug-cc-pVDZ, and MPW1PW91/aug-cc-pVTZ) and the CBS-QMPW1 methods, were used to derive the enthalpies of formation of the gaseous 2-, 3-, and 4-carboxyphenoxyl radicals as (2-HOOCC(6)H(4)O(*), g) = -322.5 +/- 3.0 kJ.mol(-1) Delta(f)(3-HOOCC(6)H(4)O(*), g) = -310.0 +/- 3.0 kJ x mol(-1), and Delta(f)(4-HOOCC(6)H(4)O(*), g) = -318.2 +/- 3.0 kJ x mol(-1). The O-H bond dissociation enthalpies in 2-OHBA, 3-OHBA, and 4-OHBA were 392.8 +/- 3.3, 383.6 +/- 3.8, and 380.0 +/- 3.4 kJ x mol(-1), respectively. Finally, by using the ortho-para method, it was found that the H- - -O intramolecular hydrogen bond in the 2-carboxyphenoxyl radical is 25.7 kJ x mol(-1), which is ca. 6-9 kJ x mol(-1) above the one estimated in its parent (2-OHBA), viz. 20.2 kJ x mol(-1) (theoretical) or 17.1 +/- 2.1 kJ x mol(-1) (experimental).     

Accurate measurement of the relative bond energies of CO and H2O ligands in Fe+ mono- and bis-ligated complexes

The systems Fe(H(2)O)(n) (+)/CO[bond]H(2)O and Fe(CO)(n) (+)/CO[bond]H(2)O (n = 1 and 2) were investigated in a triple cell Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. Using mixtures of CO with a very small amount of water, the ligand exchange equilibrium was reached, allowing experimental determination of the relevant equilibrium constants and free energies of reaction. Quantum chemical calculations at the B3LYP level of theory on the reactant and product species allowed us to determine the entropic terms and to derive the relative bond energies of CO and H(2)O in the mono- and bis-ligated complexes. For n = 1, H(2)O is more strongly bound to Fe(+) than CO by 4.1 +/- 1.6 kJ x mol(-1) at 298 K. For n = 2, at the same temperature, H(2)O is more strongly bound than CO to (H(2)O)Fe(+) by 7.6 +/- 1.6 kJ x mol(-1), and to (CO)Fe(+) by more than 20.1 kJ x mol(-1).     

Structure and bonding in solution of dioxouranium(VI) oxalate complexes: isomers and intramolecular ligand exchange

Structural isomers of [UO(2)(oxalate)(3)](4-), [UO(2)(oxalate)F(3)](3-), [UO(2)(oxalate)(2)F](3-), and [UO(2)(oxalate)(2)(H(2)O)](2-) have been studied by using EXAFS and quantum chemical ab initio methods. Theoretical structures and their relative energies were determined in the gas phase and in water using the CPCM model. The most stable isomers according to the quantum chemical calculations have geometries consistent with the EXAFS data, and the difference between measured and calculated bond distances is generally less than 0.05 A. The complex [UO(2)(oxalate)(3)](4-) contains two oxalate ligands forming five-membered chelate rings, while the third is bonded end-on to a single carboxylate oxygen. The most stable isomer of the other two complexes also contains the same type of chelate-bonded oxalate ligands. The activation energy for ring opening in [UO(2)(oxalate)F(3)](3-), deltaU++ = 63 kJ/mol, is in fair agreement with the experimental activation enthalpy, deltaH++ = 45 +/- 5 kJ/mol, for different [UO(2)(picolinate)F(3)](2-) complexes, indicating similar ring-opening mechanisms. No direct experimental information is available on intramolecular exchange in [UO(3)(oxalate)(3)](4-). The theoretical results indicate that it takes place via the tris-chelated intermediate with an activation energy of deltaU++ = 38 kJ/mol; the other pathways involve multiple steps and have much higher activation energies. The geometries and energies of dioxouranium(VI) complexes in the gas phase and solvent models differ slightly, with differences in bond distance and energy of typically less than 0.06 A and 10 kJ/mol, respectively. However, there might be a significant difference in the distance between uranium and the leaving/entering group in the transition state, resulting in a systematic error when the gas-phase geometry is used to estimate the activation energy in solution. This systematic error is about 10 kJ/mol and tends to cancel when comparing different pathways.     

Enthalpies of formation and bond dissociation energies of lower alkyl hydroperoxides and related hydroperoxy and alkoxy radicals

The enthalpies of formation and bond dissociation energies, D(ROO-H), D(RO-OH), D(RO-O), D(R-O 2) and D(R-OOH) of alkyl hydroperoxides, ROOH, alkyl peroxy, RO, and alkoxide radicals, RO, have been computed at CBS-QB3 and APNO levels of theory via isodesmic and atomization procedures for R = methyl, ethyl, n-propyl and isopropyl and n-butyl, tert-butyl, isobutyl and sec-butyl. We show that D(ROO-H) approximately 357, D(RO-OH) approximately 190 and D(RO-O) approximately 263 kJ mol (-1) for all R, whereas both D(R-OO) and D(R-OOH) strengthen with increasing methyl substitution at the alpha-carbon but remain constant with increasing carbon chain length. We recommend a new set of group additivity contributions for the estimation of enthalpies of formation and bond energies.     

Binding modes of oxalate in UO2(oxalate) in aqueous solution studied with first-principles molecular dynamics simulations. Implications for the chelate effect

Car-Parrinello molecular dynamics simulations are reported for aqueous UO(2)(H(2)O)(n)(C(2)O(4)) (n = 3, 4), calling special attention to the binding modes of oxalate and the thermodynamics of the so-called chelate effect. Based on free energies from thermodynamic integration (BLYP functional), the κ(1),κ(1')-binding mode of the oxalate (with one O atom from each carboxylate coordinating) is more stable than κ(2) (2 O atoms from the same carboxylate) and κ(1) forms by 23 and 39 kJ mol(-1), respectively. The free energy of binding a fourth water ligand to UO(2)(H(2)O)(3)(κ(1)-C(2)O(4)) is computed to be low, 12 kJ mol(-1). Changes of the hydration shell about oxalate during chelate opening are discussed. Composite enthalpies and free energies, obtained from both experiment and quantum-chemical modeling, are proposed for the formation of monodentate UO(2)(H(2)O)(4)(κ(1)-C(2)O(4)). These data suggest that the largest entropy change in the overall complex formation occurs at this stage, and that the subsequent chelate closure under water release is essentially enthalpy-driven.     

Ab initio and microcalorimetric investigations of alkene adsorption on phosphotungstic acid

The adsorption of ethene, propene, 1-butene, trans-2-butene, and isobutene on phosphotungstic acid has been characterized by density functional theory (DFT) calculations and microcalorimetric experiments. The DFT-calculated chemisorption energies to form the corresponding alkoxides for ethene, propene, 1-butene, trans-2-butene, and isobutene were -86.8, -90.3, -102.6, -79.9, and -91.4 kJ mol(-1), respectively (for their most-favorable binding modes). The relative chemisorption energies to form the alkoxides are dictated by the strength of interaction of the acidic proton with the carbon atom of the double bond that becomes protonated. The activation barrier for chemisorption was greatest for alkenes with primary (1 degrees) carbenium-like transition states followed by secondary (2 degrees) and tertiary (3 degrees) transition states. The adsorption enthalpy established from microcalorimetric experiments with propene and isobutene was approximately -100 kJ mol(-1), which is close to the DFT-calculated values. Chemisorption of ethene on phosphotungstic acid during microcalorimetric experiments was minimal, presumably because of the large activation barrier associated with a 1 degrees carbenium-like transition state. The results from this study are compared with those in the literature for the adsorption of alkenes on zeolites, which have a similar adsorption mechanism. Our results suggest that alkene adsorption is stronger on phosphotungstic acid than on zeolites, as supported by the more exothermic chemisorption energies. Additionally, activation barriers for alkene adsorption are lower over phosphotungstic acid than over zeolites.     

Calorimetric and computational study of thiacyclohexane 1-oxide and thiacyclohexane 1,1-dioxide (thiane sulfoxide and thiane sulfone). Enthalpies of formation and the energy of the S=O bond

A rotating-bomb combustion calorimeter specifically designed for the study of sulfur-containing compounds [J. Chem. Thermodyn. 1999, 31, 635] has been used for the determination of the enthalpy of formation of thiane sulfone, 4, Delta(f)H(o) m(g) = -394.8 +/- 1.5 kJ x mol(-1). This value stands in stark contrast with the enthalpy of formation reported for thiane itself, Delta(f)H(o) m(g) = -63.5 +/- 1.0 kJ x mol(-1), and gives evidence of the increased electronegativity of the sulfur atom in the sulfonyl group, which leads to significantly stronger C-SO2 bonds. Given the known enthalpy of formation of atomic oxygen in the gas phase, Delta(f)H(o) m(O,g) = +249.18 kJ x mol(-1), and the reported bond dissociation energy for the S=O bond in alkyl sulfones, BDE(S=O) = +470.0 kJ x mol(-1), it was possible to estimate the enthalpy of formation of thiane sulfoxide, 5, a hygroscopic compound not easy to use in experimental calorimetric measurements, Delta(f)H(o) m(5) = -174.0 kJ x mol(-1). The experimental enthalpy of formation of both 4 and 5 were closely reproduced by theoretical calculations at the G2(MP2)+ level, Delta(f)H(o) m(4) = -395.0 kJ x mol(-1) and Delta(f)H(o) m(5) = -178.0 kJ x mol(-1). Finally, calculated G2(MP2)+ values for the bond dissociation energy of the S=O bond in cyclic sulfoxide 5 and sulfone 4 are +363.7 and +466.2 kJ x mol(-1), respectively.     

Rates and mechanism of fluoride and water exchange in UO(2)F(5)(3-) and [UO(2)F(4)(H(2)O)](2-) studied by NMR spectroscopy and wave function based methods

The reaction mechanism for the exchange of fluoride in UO(2)F(5)(3-) and UO(2)F(4)(H(2)O)(2-) has been investigated experimentally using (19)F NMR spectroscopy at -5 degrees C, by studying the line broadening of the free fluoride, UO(2)F(4)(2-)(aq) and UO(2)F(5)(3-), and theoretically using quantum chemical methods to calculate the activation energy for different pathways. The new experimental data allowed us to make a more detailed study of chemical equilibria and exchange mechanisms than in previous studies. From the integrals of the different individual peaks in the new NMR spectra, we obtained the stepwise stability constant K(5) = 0.60 +/- 0.05 M(-1) for UO(2)F(5)(3-). The theoretical results indicate that the fluoride exchange pathway of lowest activation energy, 71 kJ/mol, in UO(2)F(5)(3-) is water assisted. The pure dissociative pathway has an activation energy of 75 kJ/mol, while the associative mechanism can be excluded as there is no stable UO(2)F(6)(4-) intermediate. The quantum chemical calculations have been made at the SCF/MP2 levels, using a conductor-like polarizable continuum model (CPCM) to describe the solvent. The effects of different model assumptions on the activation energy have been studied. The activation energy is not strongly dependent on the cavity size or on interactions between the complex and Na(+) counterions. However, the solvation of the complex and the leaving fluoride results in substantial changes in the activation energy. The mechanism for water exchange in UO(2)F(4)(H(2)O)(2-) has also been studied. We could eliminate the associative mechanism, the dissociative mechanism had the lowest activation energy, 39 kJ/mol, while the interchange mechanism has an activation energy that is approximately 50 kJ/mol higher.     

Effect of steps on the decomposition of CH3O at PdZn alloy surfaces

The decomposition of methoxide (CH(3)O) on a PdZn alloy is considered to be the rate-limiting step of steam re-forming of methanol over a Pd/ZnO catalyst. Our previous density functional (DF) studies (Langmuir 2004, 20, 8068; Phys. Chem. Chem. Phys. 2004, 6, 4499) revealed only a very low propensity of defect-free flat (111) and (100) PdZn surfaces to promote C-H or C-O bond breaking of CH(3)O. Thus, we applied the same DF periodic slab-model approach to investigate these two routes of CH(3)O decomposition on PdZn(221) surfaces that expose Pd, (221)(Pd), and Zn, (221)(Zn), steps. C-H bond cleavage of CH(3)O is greatly facilitated on (221)(Pd): the calculated activation energy is dramatically reduced, to approximately 50 kJ mol(-1) from approximately 90 kJ mol(-1) on flat PdZn surfaces, increasing the rate constant by a factor of 10(8). The lower barrier is mainly due to a weaker interaction of the reactant CH(3)O and an enhanced interaction of the product CH(2)O with the substrate. The activation energy for C-O bond scission did not decrease on the (221)(Pd) step. On the (221)(Zn) step, the calculated reaction barriers of both decomposition routes are even higher than on flat surfaces, because of the stronger adsorption of CH(3)O. Steps (and other defects) appear to be crucial for methanol steam re-forming on Pd/ZnO catalyst; the stepped surface PdZn(221)(Pd) is a realistic model for studying the reactivity of this catalyst.     

Homolysis of the peroxynitrite anion detected with permanganate

The reaction of peroxynitrite with violet-colored MnO4- leads to the formation of green MnO42-. The rate constant for the reaction at pH 11.7, 5.5 mM ionic strength, and 25 degrees C, 0.020 +/- 0.001 s(-1), is independent of the MnO4- concentration; homolysis of ONOO- to NO* and O2*- is the rate-determining step. Both NO* and O2*- react with MnO4- with rate constants of (3.5 +/- 0.7) x 10(6) M(-1)s(-1) and (5.7 +/- 0.9) x 10(5) M(-1)s(-1), respectively. The activation volume and activation energy for breaking the N-O bond are 12.6 +/- 0.8 cm(3)mol(-1) and 102 +/- 2 kJ mol(-1), respectively. In combination with the known standard Gibbs energies of formation of NO* and O2*-, the rate of the reaction of NO* and O2*-, and the pKa of ONOOH, we find a standard Gibbs energy of formation of ONOO- of +68 +/- 1 kJ mol(-1), and of ONOOH of +31 +/- 1 kJ mol(-1).     

Conformational analysis: crystallographic,NMR, and molecular mechanics studies of flexible sulfonic esters

Two novel X-ray structures of the sulfonic ester derivatives 2-(6-iodo-1,3-benzodioxol-5-yl)ethyl 4-nitrobenzenesulfonate, 3, and 2-(6-iodo-1,3-benzodioxol-5-yl)ethyl 4-methylbenzenesulfonate, 4, have been obtained in a study aimed at analyzing the structures and conformations of sulfonic ester derivatives that are routinely used in alkaloid syntheses. The crystal structure of 4 is highly unusual, containing four independent molecules that belong to two distinct conformational types: (1) a hairpin conformation (stabilized mainly by intramolecular pi-stacking) and (2) a stepped conformation (stabilized mainly by intermolecular pi-stacking). Compound 3, on the other hand, crystallizes exclusively as the hairpin conformer. New MM+ force field parameters for sulfonic esters have been developed using the X-ray data, empirical rules, and DFT calculations to estimate the bond dipole parameters. Grid searches of conformational space for 3 and 4 using MM methods show that there are several gas-phase conformations within 5 kcal/mol of the global minimum and that the lowest energy conformations (by approximately 4.6 kcal/mol) are of the hairpin type. Analysis of the MM conformational energies suggests that the dominant intramolecular interaction stabilizing the hairpin conformations of 3 and 4 is van der Waals attraction. Moreover, the lattice energies for packing the hairpin conformations of 3 and 4 are approximately 4 kcal/mol more favorable than for the stepped conformations. Various intermolecular interactions contribute to the complexity of the observed crystal structures of 3 and 4, including electrostatic attraction between O and I atoms in neighboring molecules. Langevin dynamics (LD) simulations at several temperatures (6.0 ns, friction coefficient = 2.5 ps(-1)) indicate that the conformational exchange rates are approximately 10(10)-10(11) s(-1) over the temperature range 213-400 K, accounting for the temperature-independent (1)H NMR spectra of 3 and 4.     

Excited-state interactions for [Au(CN)(2)(-)](n) and [Ag(CN)(2)(-)](n) oligomers in solution. Formation of luminescent gold-gold bonded excimers and exciplexes.

Solutions of K[Au(CN)(2)] and K[Ag(CN)(2)] in water and methanol exhibit strong photoluminescence. Aqueous solutions of K[Au(CN)(2)] at ambient temperature exhibit luminescence at concentration levels of > or =10(-2) M, while frozen methanol glasses (77 K) exhibit strong luminescence with concentrations as low as 10(-5) M. The corresponding concentration limits for K[Ag(CN)(2)] solutions are 10(-1) M at ambient temperature and 10(-4) M at 77 K. Systematic variations in concentration, solvent, temperature, and excitation wavelength tune the luminescence energy of both K[Au(CN)(2)] and K[Ag(CN)(2)] solutions by >15 x 10(3) cm(-1) in the UV-visible region. The luminescence bands have been individually assigned to *[Au(CN)(2)(-)](n) and *[Ag(CN)(2)(-)](n) excimers and exciplexes that differ in "n" and geometry. The luminescence of Au(I) compounds is related for the first time to Au-Au bonded excimers and exciplexes similar to those reported earlier for Ag(I) compounds. Fully optimized unrestricted open-shell MP2 calculations for the lowest-energy triplet excited state of staggered [Au(CN)(2)(-)](2) show the formation of a Au-Au sigma single bond (2.66 A) in the triplet excimer, compared to a weaker ground-state aurophilic bond (2.96 A). The corresponding frequency calculations revealed Au-Au Raman-active stretching frequencies at 89.8 and 165.7 cm(-1) associated with the ground state and lowest triplet excited state, respectively. The experimental evidence of the exciplex assignment includes the extremely large Stokes shifts and the structureless feature of the luminescence bands, which suggest very distorted excited states. Extended Hückel (EH) calculations for [M(CN)(2)(-)](n) and *[M(CN)(2)(-)](n) models (M = Au, Ag; n = 2, 3) indicate the formation of M-M bonds in the first excited electronic states. From the average EH values for staggered dimers and trimers, the excited-state Au-Au and Ag-Ag bond energies are predicted to be 104 and 112 kJ/mol, respectively. The corresponding bond energies in the ground state are 32 and 25 kJ/mol, respectively.     

C-X···π halogen and C-H···π hydrogen bonding: interactions of CF3X (X = Cl, Br, I or H) with ethene and propene

Using FTIR and Raman spectroscopy, the formation of halogen bonded complexes of the trifluorohalomethanes CF(3)Cl, CF(3)Br and CF(3)I with ethene and propene dissolved in liquid argon has been investigated. For CF(3)Br and CF(3)I, evidence was found for the formation of C-X···π halogen bonded 1:1 complexes. At a higher ratio of CF(3)I/propene, weak absorptions due to a 2:1 complex were also observed. Using spectra recorded at different temperatures, the complexation enthalpies for the complexes were determined to be -5.3(2) kJ mol(-1) for CF(3)Br·ethene, -7.5(2) kJ mol(-1) for CF(3)I·ethene, -5.6(1) kJ mol(-1) for CF(3)Br·propene, -8.8(1) kJ mol(-1) for CF(3)I·propene and -16.5(6) kJ mol(-1) for (CF(3)I·)(2)propene. The complexation enthalpies of the hydrogen bonded counterparts, with CF(3)H as the Lewis acid, were determined to be -4.6(4) kJ mol(-1) for CF(3)H·ethene and -5.1(2) kJ mol(-1) for CF(3)H·propene. For both hydrogen bonded complexes, a blue shift, by +4.8 and +4.0 cm(-1), respectively, was observed for the C-H stretching mode. The results from the cryospectroscopic study are compared with ab initio calculations at the MP2/aug-cc-pVDZ(-PP) level.     

Structure and dynamics of binary and ternary lanthanide(III) and actinide(III) tris[4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione] (TTA)-tributylphosphate (TBP) complexes. Part 3, the structure, thermodynamics and reaction mechanisms of 8- and 9-coordinated binary and ternary Y-TTA-TBP complexes studied by quantum chemical methods

Possible mechanisms for intermolecular exchange between coordinated and solvent water in the complexes Y(TTA)(3)(OH(2))(2) and Y(TTA)(3)(TBP)(OH(2)) and intermolecular exchange between free and coordinated HTTA in Y(TTA)(3)(OH(2))(HTTA) and Y(TTA)(3)(TBP)(HTTA) have been investigated using ab initio quantum chemical methods. The calculations comprise both structures and energies of isomers, intermediates and transition states. Based on these data and experimental NMR data (Part 2) we have suggested intimate reaction mechanisms for water exchange, intramolecular exchange between structure isomers and intermolecular exchange between free HTTA and coordinated TTA. A large number of isomers are possible for the complexes investigated, but only some of them have been investigated, in all of them the most stable geometry is a more or less distorted square anti-prism or bicapped trigonal prism; the energy differences between the various isomers are in general small, less than 10 kJ mol(-1). 9-coordinated intermediates play an important role in all reactions. Y(TTA)(3)(OH(2))(3) has three non-equivalent water ligands that can participate in ligand exchange reactions. The fastest of these exchanging sites has a QM activation energy of 18.1 kJ mol(-1), in good agreement with the experimental activation enthalpy of 19.6 kJ mol(-1). The mechanism for the intramolecular exchange between structure isomers in Y(TTA)(3)(OH(2))(2) involves the opening of a TTA-ring as the rate determining step as suggested by the good agreement between the QM activation energy and the experimental activation enthalpy 47.8 and 58.3 J mol(-1), respectively. The mechanism for the intermolecular exchange between free and coordinated HTTA in Y(TTA)(3)(HTTA) and Y(TTA)(3)(TBP)(HTTA) involves the opening of the intramolecular hydrogen bond in coordinated HTTA followed by proton transfer to coordinated TTA. This mechanism is supported by the good agreement between experimental activation enthalpies (within parenthesis) and calculated activation energies 68.7 (71.8) and 35.3 (38.8) kJ mol(-1). The main reason for the difference between the two systems is the much lower energy required to open the intramolecular hydrogen bond in the latter. The accuracy of the QM methods and chemical models used is discussed.     

A computational study of H2 dissociation on silver surfaces: the effect of oxygen in the added row structure of Ag110

We studied computationally the activation of H(2) on clean planar (111), (110) and stepped (221) as well as oxygen pre-covered silver surfaces using a density functional slab model approach. In line with previous data we determined clean silver to be inert towards H(2) dissociation, both thermodynamically and kinetically. The reaction is endothermic by approximately 40 kJ mol(-1) and exhibits high activation energies of approximately 125 kJ mol(-1). However, oxygen on the surface, modeled by the reconstructed surface p(2 x 1)O/Ag(110) that exhibits -O-Ag-O- added rows, renders H(2) dissociation clearly exothermic and kinetically feasible. The reaction was calculated to proceed in two steps: first the H-H bond is broken at an Ag-O pair with an activation barrier E(a) approximately 70 kJ mol(-1), then the H atom bound at an Ag center migrates to a neighboring O center with E(a) approximately 12 kJ mol(-1).     

Hydrogen atom transfer reactions of C2-, C4-, and C6-: bond dissociation energies of linear H-C2n- and H-C2n (n = 1, 2, 3)

The reactions of C2-, C4-, and C6- with D2O and ND3 and of C4- with CH3OH, CH4, and C2H6 have been investigated using guided ion beam tandem mass spectrometry. Hydrogen (or deuterium) atom transfer is the major product channel for each of the reactions. The reaction threshold energies for collisional activation are reported. Several of the reactions exhibit threshold energies in excess of the reaction endothermicity. Potential energy calculations using density functional theory show energy barriers for some of the reactions. Dynamic restrictions related to multiple wells along the reaction path may also contribute to elevated threshold energies. The results indicate that the reactions with D2O have the smallest excess threshold energies, which may therefore be used to derive lower limits on the C-H bond dissociation energies of the C2nH- and C2nH (n = 1-3) linear species. The experimental lower limits for the bond dissociation energies of the neutral radicals to linear products are D0(C2-H) >or= 460 +/- 15 kJ/mol, D0(C4-H) >or= 427 +/- 12 kJ/mol, and D0(C6-H) >or= 405 +/- 11 kJ/mol.