Cross‐Linked‐Polymer‐Supported N‐{2′‐[(Arylsulfonyl)amino][1,1′‐binaphthalen]‐2‐yl}prolinamide as Organocatalyst for the Direct Aldol Intermolecular Reaction under Solvent‐Free Conditions

A bottom‐up strategy was used for the synthesis of cross‐linked copolymers containing the organocatalyst N‐{(1R)‐2′‐{[(4‐ethylphenyl)sulfonyl]amino}[1,1′‐binaphthalen]‐2‐yl}‐D ‐prolinamide derived from 2 (Scheme 1). The polymer‐bound catalyst 5b containing 1% of divinylbenzene as cross‐linker showed higher catalyst activity in the aldol reaction between cyclohexanone and 4‐nitrobenzaldehyde than 5a and 5c . Remarkably, the reaction in the presence of 5b was carried out under solvent‐free, mild conditions, achieving up to 93% ee (Table 1). The polymer‐bound catalyst 5b was recovered by filtration and re‐used up to seven times without detrimental effects on the achieved diastereo‐ and enantioselectivities (Table 2). The catalytic procedure with polymer 5b was extended to the aldol reaction under solvent‐free conditions of other ketones, including functionalized ones, and different aromatic aldehydes (Table 3). In some cases, the addition of a small amount of H₂O was required to give the best results (up to 95% ee). Under these reaction conditions, the cross‐aldol reaction between aldehydes proceeded in moderate yield and diastereo‐ and enantioselectivity (Scheme 2).     

Synthesis of polymers bearing proline moieties in the side chains and their application as catalysts for asymmetric induction

Novel polyphenylacetylene and polystyrene derivatives carrying L ‐proline moieties at the side chains were synthesized by the rhodium‐catalyzed and radical polymerizations of the corresponding monomers. The polyphenylacetylene derivatives showed Cotton effects at the absorption region of the main chain, indicating that the polymers adopt helical conformations with predominantly one‐handed screw sense. The polymers catalyzed the asymmetric aldol reactions of acetone with aromatic aldehydes, and cyclohexanone with p‐nitrobenzaldehyde. The enantioselectivities largely depended on the reaction conditions. In the asymmetric aldol reaction of acetone with aromatic aldehydes, the R‐enantiomeric products were predominantly obtained except the cases with the polymer catalyst in CHCl₃. The ee of the products became higher as the reaction temperature was decreased. The polymeric catalysts were recoverable from the reaction mixture by filtration, and the recovered ones catalyzed the asymmetric aldol reaction of acetone with p‐nitrobenzaldehyde without decreasing the product yield and ee. The ee was improved using the copolymers of L ‐proline‐based and nonchiral monomers as catalysts. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Rate constants for the reactions of Cl atoms with a series of C6–C10 cycloalkanes and cycloketones at 297 ± 2 K

Rate constants for the reactions of Cl atoms with cycloheptane, cyclooctane, cyclodecane, cyclohexanone, cycloheptanone, cyclooctanone, and cyclodecanone have been measured at 297 ± 2 K and atmospheric pressure of air using a relative rate method. n‐Butane, with a rate constant of 2.05 × 10^?10 cm³ molecule^?1 s^?1, was used as the reference compound, and the rate constants obtained (in units of 10^?10 cm³ molecule^?1 s^?1) were cycloheptane, 4.22 ± 0.15; cyclooctane, 4.57 ± 0.15; cyclodecane, 5.13 ± 0.15; cyclohexanone, 1.79 ± 0.06; cycloheptanone, 2.46 ± 0.07; cyclooctanone, 2.97 ± 0.09; and cyclodecanone, 3.65 ± 0.15, where the indicated errors are two least‐squares standard deviations and do not include uncertainties in the rate constant for the reference compound n‐butane. Room temperature rate constants for the C₅–C₁₀ cycloketones indicate that the ? CH₂? groups adjacent to the carbonyl group are almost totally deactivated toward H‐atom abstraction by Cl atoms, and this also applies to acyclic ketones. A previous structure–reactivity relationship for Cl + alkanes has been extended to include acyclic and cyclic ketones. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 45: 52–58, 2013     

Abiotic C?C bond formation under environmental conditions: Kinetics of the aldol condensation of acetaldehyde in water catalyzed by carbonate ions (CO32−)

The role of C? C bond‐forming reactions such as aldol condensation in the degradation of organic matter in natural environments is receiving a renewed interest because naturally occurring ions, ammonium ions, NH⁺₄, and carbonate ions, CO₃^2?, have recently been reported to catalyze these reactions. While the catalysis of aldol condensation by OH^? has been widely studied, the catalytic properties of carbonate ions, CO₃^2?, have been little studied, especially under environmental conditions. This work presents a study of the catalysis of the aldol condensation of acetaldehyde in aqueous solutions of sodium carbonate (0.1–50 mM) at T = 295 ± 2 K. By monitoring the absorbance of the main product, crotonaldehyde, instead of that of acetaldehyde, interferences from other reaction products and from side reactions, in particular a known Cannizzaro reaction, were avoided. The rate constant was found to be first order in acetaldehyde in the presence of both CO₃^2? and OH^?, suggesting that previous studies reporting a second order for this base‐catalyzed reaction were flawed. Comparisons between the rate constants in carbonate solutions and in sodium hydroxide solutions ([NaOH] = 0.3–50 mM) showed that, among the three bases present in carbonate solutions, CO₃^2?, HCO₃^?, and OH^?, OH^? was the main catalyst for pH ≤ 11. CO₃^2? became the main catalyst at higher pH, whereas the catalytic contribution of HCO₃^? was negligible over the range of conditions studied (pH 10.3–11.3). Carbonate‐catalyzed condensation reactions could contribute significantly to the degradation of organic matter in hyperalkaline natural environments (pH ≥ 11) and be at the origin of the macromolecular matter found in these environments. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 676–686, 2010     

Studies on Direct Stereoselective Aldol Reactions in Aqueous Media

The direct aldol reaction of 4‐nitrobenzaldehyde catalyzed by NaHCO₃, with three different ketones, Zn? proline, NaHCO₃/Zn? proline, and L ‐proline/Zn? proline in aqueous media, was studied to explore the selectivity of this environmentally benign type of reaction. Amazingly, NaHCO₃ proper was found to be an efficient catalyst for the selective synthesis of β‐hydroxy ketones, showing good regio‐ and diastereoselectivity, with all reactions being completed within 9 h. Cyclopentanone and cyclohexanone were found to give rise to reversed diastereoisomer ratios, the syn and anti isomers being the major products, respectively – an unprecedented result. Also, the observed syn diastereoselectivity of aldol reactions catalyzed by L ‐proline and Zn? proline is remarkable. The corresponding condensation products 7 and 8 were characterized by ¹H‐NMR and single‐crystal X‐ray analyses. Finally, a chelate‐ vs. nonchelate‐type transition state is proposed to account for the differential diastereoselectivities.     

Atmospheric chemistry of cyclohexanone: UV spectrum and kinetics of reaction with chlorine atoms

Absolute and relative rate techniques were used to study the reactivity of Cl atoms with cyclohexanone in 6 Torr of argon or 800–950 Torr of N₂ at 295 ± 2 K. The absolute rate experiments gave k(Cl + cyclohexanone) = (1.88 ± 0.38) × 10^?10, whereas the relative rate experiments gave k(Cl + cyclohexanone) = (1.66 ± 0.26) × 10^?10 cm³ molecule^?1 s^?1. Cyclohexanone has a broad UV absorption band with a maximum cross section of (4.0 ± 0.3) × 10^?20 cm² molecule^?1 near 285 nm. The results are discussed with respect to the literature data. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 223–229, 2008     

Kinetics and simulations of reaction between safranine‐O and acidic bromate and role of bromide therein

Safranine‐O, a dye of the phenazinium class, was found to exhibit intricate kinetics during its reaction with bromate at low pH conditions. Under conditions of excess concentrations of acid and bromate, safranine‐O (SA⁺) initially depleted very slowly (k = (3.9 ± 0.3) × 10^?4 M^?3 s^?1) but after an induction time, the reaction occurred swiftly. Bromide exhibited a dual role in the reaction mechanism, both as an autocatalyst and as an inhibitor. The added bromide increased the initial rate of depletion of SA⁺, but delayed the transition to rapid reaction. The overall stiochiometric reaction was found to be 6SA⁺ + 4 BrO₃ ^? = 6SP + 3N₂O + 3H₂O + 6H⁺ + 4Br^?, where SP is 3‐amino‐7‐oxo‐2,8‐dimethyl‐5‐phenylphenazine. The fast kinetics of the reaction between aqueous bromine and safranine‐O (k = (2.2 ± 0.1) × 10³ M^?1 s^?1) are also reported in this paper A 17‐step mechanism, consistent with the overall reaction dynamics and supported by simulations, is proposed and the role of various bromo and oxybromo species is also discussed. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 542–549, 2002     

Daytime Reactions of 1,8‐Cineole in the Troposphere

Relative rate coefficients for the gas‐phase reaction of chlorine atoms (Cl) and hydroxyl radicals (OH) with 1,8‐cineole were determined by Fourier‐transform infrared (FTIR) spectroscopy between 285 and 313 K at atmospheric pressure. The temperature dependence of both reactions shows simple Arrhenius behaviour which can be represented by the following expressions (in units of cm³ molecule^?1s^?1): k(1,8‐cineole+OH)=(6.28±6.53)×10^?8exp[(?2549.3±155.7)/T] and k(1,8‐cineole+Cl)=(1.35±1.07)×10^?10exp[(?151.6±237.7)/T]. Major products of the titled reactions were identified by solid‐phase microextraction (SPME) coupled to a GC‐MS. Additionally, the first step of the reaction was theoretically studied by ab initio calculations and a reaction mechanism is proposed.     

Measurements of the Kinetics of the Reaction of OH Radicals with 3‐Methylfuran at Low Pressure

The rate constant for the reaction of OH with 3‐methylfuran was measured at 2, 4, and 6 Torr using discharge‐flow techniques coupled with laser‐induced fluorescence detection of OH. The measured rate constant (k) at 298 ± 2 K was (9.1 ± 0.3) × 10^?11 cm³ molecule^?1 s^?1, where the quoted uncertainty reflects twice the standard error of the measurements. This result is in good agreement with previously reported relative rate constant measurements at atmospheric pressure and room temperature. An Arrhenius expression of k = (3.2 ± 0.4) × 10^?11 e^{(310 ± 40)/T} cm³ molecule^?1 s^?1 was determined from measurements of the rate constant between 273 and 368 K. The negative temperature dependence agrees with previously reported theoretical calculations for the reaction of OH with 3‐methylfuran and previously reported measurements of the temperature dependences of the rate constants for the reaction of OH with similar heterocyclic organics such as furan and thiophene.     

OH‐Initiated Photooxidations of 1‐Pentene and 2‐Methyl‐2‐propen‐1‐ol: Mechanism and Yields of the Primary Carbonyl Products

The products of the gas‐phase reactions of OH radicals with 1‐pentene and 2‐methyl‐2‐propen‐1‐ol (221MPO) at T=298±2 K and atmospheric pressure were investigated by using a 4500 L atmospheric simulation chamber that was built especially for this work. The molar yield of butyraldehyde was 0.74±0.12 mol for the reaction of 1‐pentene. This work provides the first product molar yield determination of formaldehyde (0.82±0.12 mol), 1‐hydroxypropan‐2‐one (0.84±0.13 mol), and methacrolein (0.078±0.012 mol) from the reaction of 221MPO with OH radicals. The mechanism of this reaction is discussed in relation to the experimental results. Additionally, taking into consideration the complex mechanism, the rate coefficients of the reactions of OH with formaldehyde, 1‐hydroxypropan‐2‐one, and methacrolein were derived at atmospheric pressure and T=298±2 K.; the obtained values were (8.9±1.6)×10^?12, (2.4±1.4)×10^?12, and (22.9±2.3)×10^?12 cm³ molecule^?1 s^?1, respectively.     

Kinetics of the mercury(II)‐catalyzed substitution of coordinated cyanide ion in hexacyanoruthenate(II) by nitroso‐R‐salt

The kinetics and mechanism of Hg²⁺‐catalyzed substitution of cyanide ion in an octahedral hexacyanoruthenate(II) complex by nitroso‐R‐salt have been studied spectrophotometrically at 525 nm (λ_max of the purple‐red–colored complex). The reaction conditions were: temperature = 45.0 ± 0.1°C, pH = 7.00 ± 0.02, and ionic strength (I) = 0.1 M (KCl). The reaction exhibited a first‐order dependence on [nitroso‐R‐salt] and a variable order dependence on [Ru(CN)₆^4?]. The initial rates were obtained from slopes of absorbance versus time plots. The rate of reaction was found to initially increase linearly with [nitroso‐R‐salt], and finally decrease at [nitroso‐R‐salt] = 3.50 × 10^?4 M. The effects of variation of pH, ionic strength, concentration of catalyst, and temperature on the reaction rate were also studied and explained in detail. The values of k₂ and activation parameters for catalyzed reaction were found to be 7.68 × 10^?4 s^?1 and E_a = 49.56 ± 0.091 kJ mol^?1, ΔH^≠ = 46.91 ± 0.036 kJ mol^?1, ΔS^≠ = ?234.13 ± 1.12 J K^?1 mol^?1, respectively. These activation parameters along with other experimental observations supported the solvent assisted interchange dissociative (I_d) mechanism for the reaction. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 215–226, 2009     

Cross‐Aldol Reaction of Isatin with Acetone Catalyzed by Leucinol: A Mechanistic Investigation

Comprehensive mechanistic studies on the enantioselective aldol reaction between isatin ( 1 a ) and acetone, catalyzed by L ‐leucinol ( 3 a ), unraveled that isatin, apart from being a substrate, also plays an active catalytic role. Conversion of the intermediate oxazolidine 4 into the reactive syn‐enamine 6 , catalyzed by isatin, was identified as the rate‐determining step by both the calculations (ΔG^≠=26.1 kcal mol^?1 for the analogous L ‐alaninol, 3 b ) and the kinetic isotope effect (k_H/k_D=2.7 observed for the reaction using [D₆]acetone). The subsequent reaction of the syn‐enamine 6 with isatin produces (S)‐ 2 a (calculated ΔG^≠=11.6 kcal mol^?1). The calculations suggest that the overall stereochemistry is controlled by two key events: 1) the isatin‐catalyzed formation of the syn‐enamine 6 , which is thermodynamically favored over its anti‐rotamer 7 by 2.3 kcal mol^?1; and 2) the high preference of the syn‐enamine 6 to produce (S)‐ 2 a on reaction with isatin ( 1 a ) rather than its enantiomer (ΔΔG^≠=2.6 kcal mol^?1).     

Total Synthesis of the Anti‐inflammatory and Pro‐resolving Lipid Mediator MaR1n−3 DPA Utilizing an sp3–sp3 Negishi Cross‐Coupling Reaction

The first total synthesis of the lipid mediator MaR1_{n?3 DPA} ( 5 ) has been achieved in 12 % overall yield over 11 steps. The stereoselective preparation of 5 was based on a Pd‐catalyzed sp³–sp³ Negishi cross‐coupling reaction and a stereocontrolled Evans–Nagao acetate aldol reaction. LC‐MS/MS results with synthetic material matched the biologically produced 5 . This novel lipid mediator displayed potent pro‐resolving properties stimulating macrophage efferocytosis of apoptotic neutrophils.     

Kinetics and mechanism of the reactions of n‐butanal and n‐pentanal with chlorine atoms

The kinetics and mechanism of the reaction of chlorine atoms with n‐butanal and n‐pentanal have been investigated in a 142‐L reaction cell coupled to a Fourier transform infrared (FTIR) spectrometer at 298 ± 2 K and at 800 ± 3 Torr. The rate coefficients for Cl + n‐butanal and Cl + n‐pentanal were measured using the relative rate technique with isopropanol and ethene as the reference compounds. The yield of acyl radicals was determined by measuring yields of acid chloride and carbon monoxide products from the reaction of Cl + aldehyde in the absence of oxygen. The rate coefficients for Cl + n‐butanal and Cl + n‐pentanal are (1.63 ± 0.59) × 10^?10 cm³ molecule^?1 s^{? 1} and (2.37 ± 0.82) × 10^?10 cm³ molecule^?1 s^?1, respectively. The yields of acyl radicals from the reactions are 0.66 ± 0.04 for n‐butanal and 0.45 ± 0.04 for n‐pentanal. Under ambient conditions, the acyl radicals generated will react almost exclusively with oxygen. Mechanistic implications of these measurements are discussed. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 133–141, 2009     

The Total Synthesis and Biological Assessment of trans‐Epothilone A

The total synthesis of (12S,13S)‐trans‐epothilone A ( 1a ) was achieved based on two different convergent strategies. In a first‐generation approach, construction of the C(11) C(12) bond by Pd⁰‐catalyzed Negishi‐type coupling between the C(12)‐to‐C(15) trans‐vinyl iodide 5 and the C(7)‐to‐C(11) alkyl iodide 4 preceded the (nonselective) formation of the C(6) C(7) bond by aldol reaction between the C(7)‐to‐C(15) aldehyde 25 and the dianion derived from the C(1)‐to‐C(6) acid 3 . The lack of selectivity in the aldol step was addressed in a second‐generation approach, which involved construction of the C(6) C(7) bond in a highly diastereoselective fashion through reaction between the acetonide‐protected C(1)‐to‐C(6) diol 31 (‘Schinzer's ketone') and the C(7)‐to‐C(11) aldehyde 30 . As part of this strategy, the C(11) C(12) bond was established subsequent to the critical aldol step and was based on B‐alkyl Suzuki coupling between the C(1)‐to‐C(11) fragment 40 and C(12)‐to‐C(15) trans‐vinyl iodide 5 . Both approaches converged at the stage of the 3‐O, 7‐O‐bis‐TBS‐protected seco acid 27 , which was converted to trans‐deoxyepothilone A ( 2 ) via Yamaguchi macrolactonization and subsequent deprotection. Stereoselective epoxidation of the trans C(12) C(13) bond could be achieved by epoxidation with Oxone ^® in the presence of the catalyst 1,2 : 4,5‐di‐O‐isopropylidene‐L ‐erythro‐2,3‐hexodiuro‐2,6‐pyranose ( 42a ), which provided a 8 : 1 mixture of 1a and its (12R,13R)‐epoxide isomer 1b in 27% yield (54% based on recovered starting material). The absolute configuration of 1a was established by X‐ray crystallography. Compound 1a is at least equipotent with natural epothilone A in its ability to induce tubulin polymerization and to inhibit the growth of human cancer cell lines in vitro. In contrast, the biological activity of 1b is at least two orders of magnitude lower than that of epothilone A or 1a .     

Enzymatic Enantioselective Synthesis of （R）－2－Trimethylsilyl－2－hydroxyl－propionitrile by Defatted Apple Seed Meal

IntroductionOverthepastyears ,thesynthesisofchiralaldehyde cyanohydrinswaswellstudied .1Incontrasttochiralalde hyde cyanohydrins ,therewereonlyfewreportsaboutthepreparationofopticallyactiveketone cyanohydrins ,2 whichareusefulstartingmaterialsandintermediatesforthesyn thesisofmanychiralnaturalproducts .3Wethereforefo cusedonthepreparationofopticallyactivesiliconcontain ing (R ) ketone cyanohydrin ((R ) 2 trimethylsilyl 2 hy droxyl propionitrile)usingacetonecyanohydrinastran scyanationagen…     

Liquid Crystal and Rheological Behavior of 2,6-Bis(benzylidene)cyclohexanone

The liquid crystalline compound, 2,6-bis(benzylidene)cyclohexanone was synthesized using benzaldehyde and cyclohexanone as raw material, and tetrabutyl ammonium bromide as phase-transfer catalyst in the solution of sodium hydroxide. The effect of several factors, such as reaction time, reaction temperature, and concentration of sodium hydroxide, has been investigated. The product was characterized by infrared spectra, ¹H NMR and elemental analysis. The physicochemical behavior of the crystalline compound was studied by differential scanning calorimetry, polarizing microscope, and rheometer. The experimental results show that the synthesized compound exhibits typical semectic thermot liquid crystal. Meanwhile, the crystal of the compound was determined by x-ray single crystal diffraction analysis. The crystal of the compound belongs to monoclinic system with space group P2(1)/c, a = 9.586(1) Å, b = 18.391(2) Å, c = 9.433(1)Å, α = 90°, β = 115.816(2)°, γ = 90°, Dc = 1.217 g · cm^?3, V = 1496.9(3) Å^?3, and Z = 4.     

Stereochemical assignments of aldol products of 2‐arylimino‐3‐aryl‐thiazolidine‐4‐ones by 1H NMR

The aldol reactions of 2‐arylimino‐3‐aryl‐thiazolidine‐4‐ones with benzaldehyde carried out at ?78 °C were found to produce sec‐carbinols. Intramolecular hydrogen bonding within the aldol products forming a six‐membered ring enabled the assignment of stereochemistries of the major and minor diastereomers via analysis of the syn and anti ³J_H,H ¹H NMR coupling constants. Copyright © 2012 John Wiley & Sons, Ltd.     

Reactivity of common functional groups with urethanes: Models for reactive compatibilization of thermoplastic polyurethane blends

Two model urethane compounds, dibutyl 4,4′‐methylenebis(phenyl carbamate) (BMB) and dioctyl 4,4′‐methylenebis(phenyl carbamate) (OMO) were prepared by capping 4,4′‐methylenebis(phenyl isocyanate) with n‐butanol and n‐octanol, respectively. The reactions of the two model urethane compounds with several small monofunctional compounds as well as two model poly(ethylene glycols) were carried out with neat mixtures at elevated temperatures. The ranking of reactivity of the functional groups with the urethanes was determined as follows—primary amine > secondary amine ? hydroxyl ～ acid ～ anhydride ? epoxide. Nuclear magnetic resonance spectroscopy (NMR) was used for the quantitative analysis. Fourier transform infrared spectroscopy was used to complement the NMR analysis. Conversions of carbamate in each reaction were monitored over time at constant temperature (200 °C). The reactions between OMO and primary amine were conducted at 170, 180, 190, and 200 °C and best described with a second‐order bimolecular reaction model. The rate constant was estimated to be 1.8 × 10^?3 L · mol^?1 · s^?1 and activation energy 115 kJ · mol^?1. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2310–2328, 2002     

Non-isothermal Decomposition Kinetics, Specific Heat Capac-ity and Adiabatic Time-to-explosion of a High Energy Material: 4,6-Bis(5-amino-3-nitro-1,2,4-triazol-1-yl)-5-nitropyrimidine

The thermal behavior of 4,6‐bis‐(5‐amino‐3‐nitro‐1,2,4‐triazol‐1‐yl)‐5‐nitropyrimidine (BANTNP) was studied under a non‐isothermal condition by DSC, PDSC and TG/DTG methods. The kinetic parameters (E_a and A) of the exothermic decomposition reaction are 304.52 kJ·mol^?1 and 10^24.47 s^?1 at 0.1 MPa, 272.52 kJ·mol^?1 and 10^21.76 s^?1 at 5.0 MPa, respectively. The kinetic equation at 0.1 MPa can be expressed as: dα/dT=10^25.3(1?α)^3/4exp(?3.8044×10⁴/T)/β The critical temperature of thermal explosion is 588.28 K. The specific heat capacity of BANTNP was determined with a Micro‐DSC method, and the standard molar specific heat capacity is 397.54 J·mol^?1·K^?1 at 298.15 K. The adiabatic time‐to‐explosion of BANTNP was calculated to be 11.75 s.