Supramolecular structures of bis‐thionooxalamic acid esters derived from (±)‐cyclohexane‐1,2‐diamine and (±)‐1,2‐diphenylethylenediamine

The bis‐thionooxalamic acid esters trans‐(±)‐diethyl N,N′‐(cyclohexane‐1,2‐diyl)bis(2‐thiooxamate), C₁₄H₂₂N₂O₄S₂, and (±)‐N,N′‐diethyl (1,2‐diphenylethane‐1,2‐diyl)bis(2‐thiooxamate), C₂₂H₂₄N₂O₄S₂, both consist of conformationally flexible molecules which adopt similar conformations with approximate C₂ rotational symmetry. The thioamide and ester parts of the thiooxamate group are significantly twisted along the central C—C bond, with the S=C—C=O torsion angles in the range 30.94 (19)–44.77 (19)°. The twisted s‐cis conformation of the thionooxamide groups facilitates assembly of molecules into a one‐dimensional polymeric structure via intermolecular three‐center C=S...NH...O=C hydrogen bonds and C—H...O interactions formed between molecules of the opposite chirality.     

A one‐dimensional zinc(II) coordination polymer incorporating [1,1′‐biphenyl]‐4,4′‐dicarboxylate and N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands

In the title compound, catena‐poly[[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[1,1′‐biphenyl]‐4,4′‐dicarboxylato‐[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]], [Zn₂(C₁₄H₈O₄)Cl₂(C₂₆H₂₂N₄O₂)₃]_n, the Zn^II centre is four‐coordinate and approximately tetrahedral, bonding to one carboxylate O atom from a bidentate bridging dianionic [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand, to two pyridine N atoms from two N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands and to one chloride ligand. The pyridyl ligands exhibit bidentate bridging and monodentate terminal coordination modes. The bidentate bridging pyridyl ligand and the bridging [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand both lie on special positions, with inversion centres at the mid‐points of their central C—C bonds. These bridging groups link the Zn^II centres into a one‐dimensional tape structure that propagates along the crystallographic b direction. The tapes are interlinked into a two‐dimensional layer in the ab plane through N—H...O hydrogen bonds between the monodentate ligands. In addition, the thermal stability and solid‐state photoluminescence properties of the title compound are reported.     

A novel two‐dimensional metal–organic supramolecular framework including π–π stacking and hydrogen‐bond interactions

[μ‐N,N′‐Bis(pyridin‐3‐yl)benzene‐1,4‐dicarboxamide‐<!?show [forcelb]><!?tlsb=0.12pt>1:2κ²N:N′]bis{[N,N′‐bis(pyridin‐3‐yl)benzene‐1,4‐dicarboxamide‐κN]diiodidomercury(II)}, [Hg₂I₄(C₁₈H₁₄N₄O₂)₃], is an S‐shaped dinuclear molecule, composed of two HgI₂ units and three N,N′‐bis(pyridin‐3‐yl)benzene‐1,4‐dicarboxamide (L) ligands. The central L ligand is centrosymmetric and coordinated to two Hg^II cations via two pyridine N atoms, in a syn–syn conformation. The two terminal L ligands are monodentate, with one uncoordinated pyridine N atom, and each adopts a syn–anti conformation. The HgI₂ units show highly distorted tetrahedral (sawhorse) geometry, as the Hg^II centres lie only 0.34 (2) or 0.32 (2) Å from the planes defined by the I and pyridine N atoms. Supramolecular interactions, thermal stability and solid‐state luminescence properties were also measured.     

6,6′‐Di­methoxy‐2,2′‐[(1R,2R)‐cyclo­hexane‐1,2‐diyl­bis­(nitrilo­methyl­idyne)]­diphenol: three C—H⃛O hydrogen bonds generate a three‐dimensional framework

Molecules of the title compound, alternatively called (R,R)‐N,N′‐bis(3‐methoxysalicylidene)‐trans‐cyclohexane‐1,2‐diamine, C₂₂H₂₆N₂O₄, contain two intramolecular O—H⃛N hydrogen bonds and adopt a conformation with approximate twofold rotational symmetry. The mol­ecules are linked by three C—H⃛O hydrogen bonds [H⃛O = 2.45–2.55 Å, C⃛O = 3.329 (2)–3.398 (2) Å and C—H⃛O = 142–172°] into a continuous framework.     

Tuning of crystallization method and ligand conformation to give a mononuclear compound or two‐dimensional SCO coordination polymer based on a new semi‐rigid V‐shaped bis‐pyridyl bis‐amide ligand

With the new semi‐rigid V‐shaped bidentate pyridyl amide compound 5‐methyl‐N,N′‐bis(pyridin‐4‐yl)benzene‐1,3‐dicarboxamide (L) as an auxiliary ligand and the Fe^II ion as the metal centre, one mononuclear complex, bis(methanol‐κO)bis[5‐methyl‐N,N′‐bis(pyridin‐4‐yl)benzene‐1,3‐dicarboxamide‐κN]bis(thiocyanato‐κN)iron(II), [Fe(SCN)₂(C₁₉H₁₆N₄O₂)₂(CH₃OH)₂] ( 1 ), and one two‐dimensional coordination polymer, catena‐poly[[[bis(thiocyanato‐κN)iron(II)]‐bis[μ‐5‐methyl‐N,N′‐bis(pyridin‐4‐yl)benzene‐1,3‐dicarboxamide‐κ²N:N′]] methanol disolvate dihydrate], {[Fe(SCN)₂(C₁₉H₁₆N₄O₂)₂]·2CH₃OH·2H₂O}_n ( 2 ), were prepared by slow evaporation and H‐tube diffusion methods, respectively, indicating the effect of the method of crystallization on the structure type of the target product. Both complexes have been structurally characterized by elemental analysis, IR spectroscopy and single‐crystal X‐ray crystallography. The single‐crystal X‐ray diffraction analysis shows that L functions as a monodentate ligand in mononuclear 1 , while it coordinates in a bidentate manner to two independent Fe(SCN)₂ units in complex 2 , with a different conformation from that in 1 and the ligands point in two almost orthogonal directions, therefore leading to a two‐dimensional grid‐like network. Investigation of the magnetic properties reveals the always high‐spin state of the Fe^II centre over the whole temperature range in 1 and a gradual thermally‐induced incomplete spin crossover (SCO) behaviour below 150 K in 2 , demonstrating the influence of the different coordination fields on the spin properties of the metal ions. The current results provide useful information for the rational design of functional complexes with different structure dimensionalities by employing different conformations of the ligand and different crystallization methods.     

Two new zinc(II) and mercury(II) complexes based on N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide): synthesis,crystal structures and antibacterial activities

Reaction of N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide), C₂₀H₁₈F₂N₄O₂, ( L^F ), with zinc chloride and mercury(II) chloride produced different types and shapes of neutral coordination complexes, namely, dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ²N,O]zinc(II), [ZnCl₂(C₂₀H₁₈F₂N₄O₂)], ( 1 ), and dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ⁴O,N,N′,O′]mercury(II), [HgCl₂(C₂₀H₁₈F₂N₄O₂)], ( 2 ). The organic ligand and its metal complexes are characterized using various techniques: IR, UV–Vis and nuclear magnetic resonance (NMR) spectroscopies, in addition to powder X‐ray diffraction (PXRD), single‐crystal X‐ray crystallography and microelemental analysis. Depending upon the data from these analyses and measurements, a typical tetrahedral geometry was confirmed for zinc complex ( 1 ), in which the Zn^II atom is located outside the bis(benzhydrazone) core. The Hg^II atom in ( 2 ) is found within the core and has a common octahedral structure. The in vitro antibacterial activities of the prepared compounds were evaluated against two different bacterial strains, i.e. gram positive Bacillus subtilis and gram negative Pseudomonas aeruginosa bacteria. The prepared compounds exhibited differentiated growth‐inhibitory activities against these two bacterial strains based on the difference in their lipophilic nature and structural features.     

Synthesis and crystal structure of the dinuclear copper(II) Schiff base complex μ‐hydroxido‐μ‐chlorido‐bis{[bis(trans‐2‐nitrocinnamaldehyde)ethylenediamine]chloridocopper(II)} dichloromethane sesquisolvate

Transition metal complexes of Schiff base ligands have been shown to have particular application in catalysis and magnetism. The chemistry of copper complexes is of interest owing to their importance in biological and industrial processes. The reaction of copper(I) chloride with the bidentate Schiff base N,N′‐bis(trans‐2‐nitrocinnamaldehyde)ethylenediamine {Nca₂en, systematic name: (1E,1′E,2E,2′E)‐N,N′‐(ethane‐1,2‐diyl)bis[3‐(2‐nitrophenyl)prop‐2‐en‐1‐imine]} in a 1:1 molar ratio in dichloromethane without exclusion of air or moisture resulted in the formation of the title complex μ‐chlorido‐μ‐hydroxido‐bis(chlorido{(1E,1′E,2E,2′E)‐N,N′‐(ethane‐1,2‐diyl)bis[3‐(2‐nitrophenyl)prop‐2‐en‐1‐imine]‐κ²N,N′}copper(II)) dichloromethane sesquisolvate, [Cu₂Cl₃(OH)(C₂₀H₁₈N₄O₄)₂]·1.5CH₂Cl₂. The dinuclear complex has a folded four‐membered ring in an unsymmetrical Cu₂OCl₃ core in which the approximate trigonal bipyramidal coordination displays different angular distortions in the equatorial planes of the two Cu^II atoms; the chloride bridge is asymmetric, but the hydroxide bridge is symmetric. The chelate rings of the two Nca₂en ligands have different conformations, leading to a more marked bowing of one of the ligands compared with the other. This is the first reported dinuclear complex, and the first five‐coordinate complex, of the Nca₂en Schiff base ligand. Molecules of the dimer are associated in pairs by ring‐stacking interactions supported by C—H…Cl interactions with solvent molecules; a further ring‐stacking interaction exists between the two Schiff base ligands of each molecule.     

A pair of diastereomeric 1:2 salts of (R)‐ and (S)‐2‐methylpiperazine with (2S,3S)‐tartaric acid

The crystal structures of a pair of diastereomeric 1:2 salts of (R)‐ and (S)‐2‐methylpiperazine with (2S,3S)‐tartaric acid, namely (R)‐2‐methylpiperazinediium bis[hydrogen (2S,3S)‐tartrate] monohydrate, (I), and (S)‐2‐methylpiperazinediium bis[hydrogen (2S,3S)‐tartrate] monohydrate, (II), both C₅H₁₄N₂²⁺·2C₄H₅O₆⁻·H₂O, each reveal the formation of well‐defined head‐to‐tail‐connected hydrogen tartrate chains; these chains are linked into a two‐dimensional sheet via intermolecular hydrogen bonds involving hydroxy groups and water molecules, resulting in a layer structure. The (R)‐2‐methylpiperazinediium ions lie between the hydrogen tartrate layers in the most stable equatorial conformation in (I), whereas in (II), these ions are in an unstable axial position inside the more interconnected layers and form a larger number of intermolecular hydrogen bonds than are observed in (I).     

New 3,3′[2,2′‐oxy‐bis‐(oxazaborolidine)]‐ethylenes. Structural studies by NMR,X‐ray,and quantum chemistry methods

3,3′‐[2,2′‐Oxy‐bis‐(4S‐methyl, 5R‐phenyl‐1,3,2‐oxazaborolidine)]ethylene ( 4a ) and 3,3′‐[2, 2′‐oxy‐(4S‐methyl‐5R‐phenyl‐1,3,2‐oxazaborolidine)‐ (1,3,2‐benzoxazaborolidine)]ethylene ( 4b ) were synthesized by the reaction of N,N′‐bis‐[(1R,2S)‐norephedrine]oxalyl ( 3a ) or N,N′‐[((1R,2S)‐norephedrine, o‐hydroxyphenylamine]oxalyl ( 3b ) with BH₃‐THF. The molecular structure of these compounds was established by NMR and infrared spectroscopy. The molecular geometry for 4 was studied by means of theoretical methods, resulting in structures that were in total agreement with those obtained by spectroscopy data and X‐ray diffraction. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:513–519, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20151     

A one‐dimensional platinum mixed‐valence complex with bridging thiocyanate S atoms: [[PtII(en)2](μ‐SCN)[PtIV(en)2](μ‐SCN)](ClO4)4 (en is ethane‐1,2‐diamine)

A new one‐dimensional platinum mixed‐valence complex with nonhalogen bridging ligands, namely catena‐poly[[[bis(ethane‐1,2‐diamine‐κ²N,N′)platinum(II)]‐μ‐thiocyanato‐κ²S:S‐[bis(ethane‐1,2‐diamine‐κ²N,N′)platinum(IV)]‐μ‐thiocyanato‐κ²S:S] tetrakis(perchlorate)], {[Pt₂(SCN)₂(C₂H₈N₂)₄](ClO₄)₄}_n, has been isolated. The Pt^II and Pt^IV atoms are located on centres of inversion and are stacked alternately, linked by the S atoms of the thiocyanate ligands, forming an infinite one‐dimensional chain. The Pt^IV—S and Pt^II...S distances are 2.3933 (10) and 3.4705 (10) Å, respectively, and the Pt^IV—S...Pt^II angle is 171.97 (4)°. The introduction of nonhalogen atoms as bridging ligands in this complex extends the chemical modifications possible for controlling the amplitude of the charge‐density wave (CDW) state in one‐dimensional mixed‐valence complexes. The structure of a discrete Pt^IV thiocyanate compound, bis(ethane‐1,2‐diamine‐κ²N,N′)bis(thiocyanato‐κS)platinum(IV) bis(perchlorate) 1.5‐hydrate, [Pt(SCN)₂(C₄H₈N₂)₂](ClO₄)₂·1.5H₂O, has monoclinic (C2) symmetry. Two S‐bound thiocyanate ligands are located in trans positions, with an S—Pt—S angle of 177.56 (3)°.     

Diels–Alder Additions,Ene Reactions,and Condensations of 4‐(Acylamino)‐5‐nitrosopyrimidines – Synthesis of 8‐Substituted Guanines and of 6‐Substituted Pteridinones

4‐(Acylamino)‐5‐nitrosopyrimidines react either by a reductive condensation to provide 8‐substituted guanines, or by a Diels–Alder cycloaddition, or an ene reaction, to provide 6‐substituted pteridinones, depending on the nature of the acyl group and the reaction conditions. Experimental details are provided for the transformation of (acylamino)‐nitrosopyrimidines to 8‐substituted guanines, and the scope of the reaction is further demonstrated by transforming the trifluoro acetamide 25 to the 8‐(trifluoromethyl)guanine ( 27 ), and the N,N′‐bis(nitrosopyrimidinyl)‐dicarboxamide 29 to the (R,R)‐1,2‐di(guan‐8‐yl)ethane‐1,2‐diol ( 32 ). An intramolecular Diels–Alder reaction of the N‐sorbyl (=N‐hexa‐2,4‐dienoyl) nitrosopyrimidine 10 , followed by a spontaneous elimination to cleave the N,O bond of the initial cycloaddition product provided the pteridinones 14 or 15 , characterized by a (Z)‐ or (E)‐3‐hydroxyprop‐1‐enyl group at C(6). Treatment of 10 with Ph₃P led to the C(8)‐penta‐1,3‐dienyl‐guanine 18 . The ene reaction of the N‐crotonyl (=N‐but‐2‐enoyl) nitrosopyrimidine 19 provided the 6‐vinyl‐pteridinone 20a that dimerized readily to 21a , while treatment of 19 with Ph₃P led in high yield to 8‐(prop‐1‐enyl)guanine ( 23 ). The structure of the dimer 21 was established by X‐ray analysis of its bis(N,N‐dimethylformamidine) derivative 21b . The crystal structure of the nitroso amide 10 is characterized by two molecules in the centrosymmetric unit cell. Intermolecular H‐bonds connect the amino group to the amide carbonyl and to N(1). The crystalline bis(purine) 30 forms a left‐handed helix with four molecules per turn and a pitch of 30.2 Å.     

[N,N′‐Bis(3‐aminopropyl)ethylenediamine‐κ4N,N′,N′′,N′′′](trithiocyanurato‐κ2N,S)zinc(II) ethanol solvate

In the crystal structure of the title compound, [N,N′‐bis(3‐­amino­propyl)­ethyl­enedi­amine‐κ⁴N,N′,N′′,N′′′][1,3,5‐triazine‐2,4,6(1H,3H,5H)‐tri­thionato(2−)‐κ²N,S]­zinc(II) ethanol sol­vate, [Zn(C₈H₂₂N₄)₂(C₃HN₃S₃)]·C₂H₆O, the Zn^II atom is octa­hedrally coordinated by four N atoms [Zn—N = 2.104 (2)–2.203 (2) Å] of a tetradentate N‐donor N,N′‐bis(3‐­amino­propyl)­ethyl­enedi­amine (bapen) ligand and by two S and N atoms [Zn—S = 2.5700 (7) Å and Zn—N = 2.313 (2) Å] of a tri­thio­cyanurate(2−) (ttcH²⁻) dianion bonded as a bidentate ligand in a cis configuration. The crystal structure of the compound is stabilized by a network of hydrogen bonds.     

Synthesis,characterization and crystal structures of the bidentate Schiff base N,N′‐bis(2‐nitrocinnamaldehyde)ethylenediamine and its complex with CuNCS and triphenylphosphane

Reaction of copper(I) thiocyanate and triphenylphosphane with the bidentate Schiff base N,N′‐bis(trans‐2‐nitrocinnamaldehyde)ethylenediamine {Nca₂en, (1); systematic name (1E,1′E,2E,2′E)‐N,N′‐(ethane‐1,2‐diyl)bis[3‐(2‐nitrophenyl)prop‐2‐en‐1‐imine]}, C₂₀H₁₈N₄O₄, in a 1:1:1 molar ratio in acetonitrile resulted in the formation of the complex {(1E,1′E,2E,2′E)‐N,N′‐(ethane‐1,2‐diyl)bis[3‐(2‐nitrophenyl)prop‐2‐en‐1‐imine]‐κ²N,N′}(thiocyanato‐κN)(triphenylphosphane‐κP)copper(I)], [Cu(NCS)(C₂₀H₁₈N₄O₄)(C₁₈H₁₅P)] or [Cu(NCS)(Nca₂en)(PPh₃)], (2). The Schiff base and copper(I) complex have been characterized by elemental analyses, IR, electronic and ¹H NMR spectroscopy, and X‐ray crystallography [from synchrotron data for (1)]. The molecule of (1) lies on a crystallographic inversion centre, with a trans conformation for the ethylenediamine unit, and displays significant twists from coplanarity of its nitro group, aromatic ring, conjugated chain and especially ethylenediamine segments. It acts as a bidentate ligand coordinating via the imine N atoms to the Cu^I atom in complex (2), in which the ethylenediamine unit necessarily adopts a somewhat flattened gauche conformation, resulting in a rather bowed shape overall for the ligand. The NCS⁻ ligand is coordinated through its N atom. The geometry around the Cu^I atom is distorted tetrahedral, with a small N—Cu—N bite angle of 81.56 (12)° and an enlarged opposite angle of 117.29 (9)° for SCN—Cu—P. Comparisons are made with the analogous Schiff base having no nitro substituents and with metal complexes of both ligands.     

N,N′‐Bis(2‐methoxy­benzyl­idene) adducts of ethane‐1,2‐di­amine,propane‐1,3‐di­amine and butane‐1,4‐di­amine

We have isolated and crystallographically characterized the three homologous compounds N,N′‐bis(2‐methoxy­benzyl­idene)­ethane‐1,2‐di­amine (MeSalen), C₁₈H₂₀N₂O₂, N,N′‐bis(2‐methoxy­benzyl­idene)­propane‐1,3‐di­amine (MeSalpr), C₁₉H₂₂N₂O₂, and N,N′‐bis(2‐methoxy­benzyl­idene)­butane‐1,4‐di­amine (MeSalbu), C₂₀H₂₄N₂O₂. In contrast with MeSalpr, the mol­ecules of MeSalen and MeSalbu, which have an even number of methyl­ene units, have crystallographic symmetry. Comparing these methoxy‐substituted species with their hydroxy equivalents shows that the aryl rings rotate upon removal of the O—H⋯N hydrogen bonds. The packing of MeSalen and MeSalpr is controlled by C—H⋯π interactions, whereas that of MeSalbu has only van der Waals contacts.     

A dimeric heteroleptic five‐coordinate zinc(II) complex containing a non‐motionally restricted N,N′‐heterocyclic ligand

The title compound, bis(μ‐1,2‐benzene­thiol­ato)‐1:2κ³S,S′:S′;2:1κ³S,S′:S′‐bis­[(2,2′‐bi­pyridine‐κ²N,N′)­zinc(II)], [Zn₂(μ‐C₆H₄S₂)₂(C₁₀H₈N₂)₂], crystallizes with the dinuclear mol­ecule located on a center of symmetry. The coordination geometry about the Zn atom is a modestly distorted trigonal bipyramid, with the axial ligating atoms at an angle of 170.81 (4)° and the angles in the equatorial plane in the range 112.94 (4)–129.95 (4)°. Weak π‐stacking interactions between bi­pyridine ligands on adjacent mol­ecules [interplanar spacing = 3.315 (3) Å] and a possible weak intermolecular C—H⋯S hydrogen bond (H⋯S = 2.84 Å) are seen in the crystal.     

A new one‐dimensional CdII coordination polymer with a two‐dimensional layered structure incorporating 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate ligands

The N‐heterocyclic ligand 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole (imb) has a rich variety of coordination modes and can lead to polymers with intriguing structures and interesting properties. In the coordination polymer catena‐poly[[cadmium(II)‐bis[μ‐benzene‐1,2‐dicarboxylato‐κ⁴O¹,O^1′:O²,O^2′]‐cadmium(II)‐bis{μ‐2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole}‐κ²N²:N³;κ²N³:N²] dimethylformamide disolvate], {[Cd(C₈H₄O₄)(C₁₁H₁₀N₄)]·C₃H₇NO}_n, (I), each Cd^II ion exhibits an irregular octahedral CdO₄N₂ coordination geometry and is coordinated by four O atoms from two symmetry‐related benzene‐1,2‐dicarboxylate (1,2‐bdic²⁻) ligands and two N atoms from two symmetry‐related imb ligands. Two Cd^II ions are connected by two benzene‐1,2‐dicarboxylate ligands to generate a binuclear [Cd₂(1,2‐bdic)₂] unit. The binuclear units are further connected into a one‐dimensional chain by pairs of bridging imb ligands. These one‐dimensional chains are further connected through N—H…O hydrogen bonds and π–π interactions, leading to a two‐dimensional layered structure. The dimethylformamide solvent molecules are organized in dimeric pairs via weak interactions. In addition, the title polymer exhibits good fluorescence properties in the solid state at room temperature.     

New Optically Active Bis‐Heterocycles Derived from (S)‐Proline

Enantiomerically pure bis‐heterocycles containing a (S)‐proline moiety have been prepared starting from (S)‐N‐benzylprolinehydrazide ( 2b ). The reactions with isothiocyanates or butyl isocyanate in refluxing MeOH led to the corresponding thiosemicarbazide 5 and semicarbazide 9 with a N‐benzylprolinoyl residue. The structure of the tert‐butyl derivative 5d was established by X‐ray crystallography. Base‐catalyzed cyclization of 5 and 9 led to (S)‐3‐(pyrrolidin‐2‐yl)‐1H‐1,2,4‐triazole‐5(4H)‐thiones 6 and the corresponding 5(4H)‐one 8 , respectively, whereas, in concentrated H₂SO₄, compounds 5 undergo cyclization to give (S)‐5‐amino‐2‐(pyrrolidin‐2‐yl)‐1,3,4‐thiadiazoles 7 . Furthermore, 2b reacted with hexane‐2,5‐dione in boiling ⁱPrOH to yield the (S)‐N‐(2,5‐dimethylpyrrol‐1‐yl)prolinamide 10 . In the case of the bis‐heterocycle 8 , treatment with HCOONH₄ and Pd/C in MeOH gave the debenzylated product 12 .     

Weak C—H...O and C—H...π hydrogen bonds and π–π stacking interactions in a series of four N′‐[(E)‐(aryl)methylidene]‐N‐methyl‐2‐oxo‐1,3‐oxazolidine‐4‐carbohydrazides

Oxazolidin‐2‐ones are widely used as protective groups for 1,2‐amino alcohols and chiral derivatives are employed as chiral auxiliaries. The crystal structures of four differently substituted oxazolidinecarbohydrazides, namely N′‐[(E)‐benzylidene]‐N‐methyl‐2‐oxo‐1,3‐oxazolidine‐4‐carbohydrazide, C₁₂H₁₂N₃O₃, (I), N′‐[(E)‐2‐chlorobenzylidene]‐N‐methyl‐2‐oxo‐1,3‐oxazolidine‐4‐carbohydrazide, C₁₂H₁₂ClN₃O₃, (II), (4S)‐N′‐[(E)‐4‐chlorobenzylidene]‐N‐methyl‐2‐oxo‐1,3‐oxazolidine‐4‐carbohydrazide, C₁₂H₁₂ClN₃O₃, (III), and (4S)‐N′‐[(E)‐2,6‐dichlorobenzylidene]‐N,3‐dimethyl‐2‐oxo‐1,3‐oxazolidine‐4‐carbohydrazide, C₁₃H₁₃Cl₂N₃O₃, (IV), show that an unexpected mild‐condition racemization from the chiral starting materials has occurred in (I) and (II). In the extended structures, the centrosymmetric phases, which each crystallize with two molecules (A and B) in the asymmetric unit, form A+B dimers linked by pairs of N—H...O hydrogen bonds, albeit with different O‐atom acceptors. One dimer is composed of one molecule with an S configuration for its stereogenic centre and the other with an R configuration, and possesses approximate local inversion symmetry. The other dimer consists of either R,R or S,S pairs and possesses approximate local twofold symmetry. In the chiral structure, N—H...O hydrogen bonds link the molecules into C(5) chains, with adjacent molecules related by a 2₁ screw axis. A wide variety of weak interactions, including C—H...O, C—H...Cl, C—H...π and π–π stacking interactions, occur in these structures, but there is little conformity between them.     

Efficient Synthesis of a Styryl Analogue of (2S,3R,4E)‐N2‐Octadecanoyl‐4‐tetradecasphingenine via Cross‐Metathesis Reaction

The first total synthesis of sphingolipid (2S,3R,4E)‐N²‐octadecanoyl‐4‐tetradecasphingenine ( 1a ), a natural sphingolipid isolated from Bombycis Corpus 101A, and of its styryl analogue 1b was achieved in good overall yield (Schemes 1 and 2). The key step involved the installation with (E) stereoselectivity of a long lipophilic chain or phenyl group on allyl alcohol derivative 3 via a cross‐metathesis reaction (→ 5a or 5b ). The N‐Boc protected 3 was easily accessible from (S)‐Garner aldehyde.     

Hydrogen‐bonding network of N,N′‐bis[2‐(tert‐butyldimethylsiloxy)ethyl]ethylenediammonium dichloride

The title salt, C₁₈H₄₆N₂O₂Si₂²⁺·2Cl⁻, has been synthesized by reaction of N,N′‐bis(2‐hydroxyethyl)ethylenediamine with tert‐butyldimethylsilyl chloride. The zigzag backbone dication is located across an inversion centre and the two chloride anions are related by inversion symmetry. The ionic components form a supramolecular two‐dimensional network via N—H...Cl hydrogen bonding, which is responsible for the high melting point compared with the oily compound N,N′‐bis[2‐(tert‐butyldimethylsiloxy)ethyl]ethylenediamine.