Stereoselective Cycloaddition of N-Acyliminium Ions with α,β-Unsaturated Ketones and Esters

The [4+2] reactions of N‐acyliminium ions, produced from 2‐aryl‐3‐hydroxy‐2,3‐dihydroisoindol‐1‐ones or 5‐hydroxy‐1‐phenyl‐2,5‐dihydro/2,3,4,5‐tetrahydropyrrol‐2‐ones in the presence of BF₃OEt₂, with α,β‐unsaturated ketones or esters were examined, and the dependence of these reactions on the substituents at double bonds was clarified. For β‐aryl substituted α,β‐unsaturated ketones and esters such as 4‐aryl‐3‐buten‐2‐ones, chalcones and methyl cinnamate, the [4+2] reactions could proceed smoothly at room temperature to afford 6‐acyl‐5,6,6a,11‐tetrahydroisoindolo[2,1‐a]quinolin‐11‐ones and 4‐acyl‐1,3a,4,5‐tetrahydropyrrolo[1,2‐a]quinolin‐ 1‐ones or 4‐acyl‐1,2,3,3a,4,5‐hexahydropyrrolo[1,2‐a]quinolin‐1‐ones in moderate to high yields; while for simple α,β‐unsaturated ketones and esters such as methyl crotonate and ethyl 3‐methylbut‐2‐enoate, except mesityloxide, the [4+2] reactions were difficult to proceed. The cycloaddition reactions were highly stereoselective, and only one stereoisomer was produced in each reaction.     

Transformation of Structure and Properties of Vesicles Induced by Transition Metal Ions

This paper proved that octodecyl propylenediamine could form vesicles in pure water and aqueous solution of CuCl2 or Cu（NO3）2. The structure and morphology of vesicles were different when the copper （Ⅱ） salt was added to the solution. The results showed that both the counterions and the ligands had strong influence on the configuration of coordinated structures and packing model in bilayer membrane of vesicles.     

Effects of Temperature and Common Ions on Binding of Puerarin to BSA

The effects of temperature and common ions on binding of puerarin to bovine serum albumin (BSA) are investigated. The binding constants (K _a) between puerarin and BSA are 1.13×10⁴ L⋅mol⁻¹ (20 °C) and 1.54×10⁴ L⋅mol⁻¹ (30 °C), and the number of binding sites (n) is (0.95±0.02). However, at a higher temperature (40 °C) the stability of the puerarin–BSA system decreases, which results in a lower binding constant (1.58×10³ L⋅mol⁻¹) and number of binding sites (n=0.73) of the puerarin–BSA system. However, the presence of Cu²⁺ and Fe³⁺ ions increases the binding constants and the number of binding sites in the puerarin–BSA complex.     

Complete Oxidation of Methane over Palladium Supported on Alumina Modified with Calcium,Lanthanum,and Cerium Ions

The activity and thermal stability of Pd/Al_2O_3 and Pd/(Al_2O_3 MO_x)(M=Ca,La,Ce) palladium catalysts in the reaction of complete oxidation of methane are presented in this study.The catalyst supports were prepared by sol-gel method and they were dried either conventionally or with supercritical carbon dioxide.Then they were impregnated with palladium nitrate solution.The catalysts with unmodified alumina had a high surface area.The activity and thermal stability of the alumina- supported catalyst was also very high.The introduction of calcium,lanthanum,or cerium oxide into alumina support caused a decrease of the surface area in the way dependent on the support precursor drying method.These modifiers decreased the activity of palladium catalysts,and they required higher temperatures for the complete oxidation of methane than unmodified Pd/Al_2O_3.The improvement of the palladium activity by lanthanum and cerium support modifier was observed only at low temperatures of the reaction.     

Synthesis of Polyacrylaminothiourea Chelating Fiber and Properties of Concentration and Separation of Trace Noble Metal Ions from Samples

A novel polyacrylaminothiourea chelating fiber was synthesized simply and rapidly from nitrilon (an acrylonitrile-based synthetic fiber), which was applied to preconcentrate and separate of trace amount of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ） and Ir (Ⅳ） ions from solution of samples.The analyzed ions can be quantitatively concentrated by the fiber up to a flow rate of 20.0mL/min at pH2, and can also be desorbed with 15 mL of 4mol/L HCl 3% thiourea from the fiber column with recoveries of 96.5%-100%.The chelating fiber can be reused for ten times,the recoveries of these ions are still over 92%,and hundred to thousand times of excess of Fe(Ⅲ）,Al（Ⅲ）,Ca(Ⅱ），Mg（Ⅱ）,Ni(Ⅱ）,Mn（Ⅱ),Cu(Ⅱ），Zn(Ⅱ），and Cd(Ⅱ） cause no interference on the determination of the analyzed ions by inductively-coupled plasma atomic emission spectrometry (ICP-AES).The static saturation adsorption capacities of the fiber for the analytes are in the range of 1.15-2.80mmol/g.The relative standard deviations for the determination of 20.0ng/mL each of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ）and Ir(Ⅳ） are in the range of 0.7%-3.0%.The recoveries for test from standard additions to real solution samples are between 96% and 100%.The concentration of each ion in powder sample detected by the method is in good agreement with the certified value.     

Raman Spectra of Laser Crystals NAB and NYAB and the Ligand Vibrations of Their Active Ions

ＲａｍａｎＳｐｅｃｔｒａｏｆＬａｓｅｒＣｒｙｓｔａｌｓＮＡＢａｎｄＮＹＡＢａｎｄｔｈｅＬｉｇａｎｄＶｉｂｒａｔｉｏｎｓｏｆＴｈｅｉｒＡｃｔｉｖｅＩｏｎｓ￥ＨｏｎｇＳｈｕｉ－Ｌｉ（ＤｅｐａｒｔｍｅｎｔｏｆＰｈｙｓｉｃｓ，ＦｕｚｈｏｕＵｎｉｖｅｒｓｉｔｙ...     

Complete Oxidation of Methane Alumina Modified with Calcium, over Palladium Supported on Lanthanum, and Cerium Ions

The activity and thermal stability of Pd/Al2O3 and Pd/（Al2O3＋MOx） （M=Ca, La, Ce） palladium catalysts in the reaction of complete oxidation of methane are presented in this study. The catalyst supports were prepared by sol-gel method and they were dried either conventionally or with supercritical carbon dioxide. Then they were impregnated with palladium nitrate solution. The catalysts with unmodified alumina had a high surface area. The activity and thermal stability of the aluminasupported catalyst was also very high. The introduction of calcium, lanthanum, or cerium oxide into alumina support caused a decrease of the surface area in the way dependent on the support precursor drying method. These modifiers decreased the activity of palladium catalysts, and they required higher temperatures for the complete oxidation of methane than unmodified Pd/Al2O3. The improvement of the palladium activity by lanthanum and cerium support modifier was observed only at low temperatures of the reaction.     

Flow-Injection Extraction–Photometric Trace Determination of Phosphate and Silicate Ions

As an extension of the method for extraction preconcentration in flow analysis including the extraction–chromatographic recovery of analytes and the chromatomembrane separation of the extract from the aqueous phase that was proposed previously, a procedure was developed for the flow-injection extraction–photometric trace determination of phosphate and silicate ions with the use of a 1% solution of tri-n-octylamine in chloroform as the extractant. Detection limits are 5 g/L for phosphate ions and 20 g/L for silicate ions.     

Langmuir–Blodgett Monolayers and Films of Alkylated Tetraazacrowns Containing Metal Ions and Nanoparticles

The behavior of individual 1,7-dicetyltetraaza-12-crown-4 and its mixture with 1,4,7,10-tetracetyltetraaza-12-crown-4 in the Langmuir monolayers at the subphases containing Cu(II) ions or colloidal gold particles is studied. Based on the compression isotherms, the complexing ability of these amphiphilic cyclenes in a monolayer at the surface of aqueous dilute solutions of copper salt is established. It was shown that the fraction of complexes in a monolayer is proportional to the copper ion concentration in the subphase. Using surface balance, atomic force microscopy, and electron microscopy methods, it was revealed that the monolayer of dicetylcyclene at the surface of gold hydrosol binds nanoparticles from the subphase; the number of particles bound by the monolayer is proportional to their content in the hydrosol. The Langmuir–Blodgett films (LBF) of dicetylcyclene are prepared; their ability to bind copper ions from solution was disclosed by quartz crystal microbalance. The LBFs of dicetylcyclene containing gold nanoparticles in each layer are assembled.     

Synthesis and Characterization of Heterocyclic Functionalized Polymers by Click Reaction: Preparation of Magnetic Nanocomposites and Studies on Their Thermal,Mechanical, Photophysical and Metal Ions Removal Properties

This work reports synthesis and characterization of heterocyclic functionalized polymers, poly(triazole-etherimidazole)s(PTAEI), from a dialkyne-terminated compound, 3-(4,5-bis(4-(propargyloxy)phenyl)-1H-imidazol-2-yl)-9-ethyl-9H-carbazole, by using click reaction. PTAEIs were characterized and their properties such as solubility, thermal, mechanical, photophysical and metal ions adsorption were investigated. These polymers had weight average molar masses(Mw) in the range of 19100-26700 g/mol, exhibited excellent solubility in polar aprotic solvents and formed low-colored flexible thin films by solution casting method. They exhibited good thermal stability with glass transition temperatures(Tg) between 160 °C and 211 °C and 10% weight loss temperatures(T10%) in the range of 308-426 °C. Nanocomposites of PTAEIs with epoxide-terminated Fe3O4 showed that strong interfacial interaction between inorganic particles and the polymer matrix contributed to the enhanced thermal and mechanical properties. The photoluminescence intensity of the PTAEIs increased and the spectra red shifted with increasing Fe3O4 content. The PTAEIs and nanocomposites were tested for their extraction capability of metal ions from aqueous solutions either individually or in the mixture.     

Redox Isomerism of α-Ferrocenylcarbenium Ions

The formation of α-ferrocenylcarbenium ions FcC⁺H₂ (λ_max 600 nm) and FcC⁺HCH₃ (λ_max 730 nm) and their redox isomerism at the protonation of ferrocenylmethanol and vinylferrocene was proved using the method of electronic spectroscopy. The effect on the process of the solvent and acid nature as well as of hydrogen peroxide additives is discussed.     

Characterizations and Catalytic Properties of Transition Metal Ions Incorporated in Mesoporous Materials

Mesoporous materials typified by MCM-41 possess well-ordered mesoporous channels with controllable pore sizes from 2-30 nm, and are expected as desirable materials for catalysis. However, silicious mesoporous materials generally do not have sufficient intrinsic catalytic activities. Thus many studies have focused on introducing catalytically active sites. It is expected that different synthetic methods would result in different coordination structures of metal cations introduced in MCM-41, a…     

Modulation of the Physicochemical Properties of Heteropolynuclear Assemblies Containing Lanthanide Ions and 2,2′-oxydiacetate

Summary: This work focuses on the polynuclear complexes formed by a lanthanide ion (Ln), a bivalent cation (M) and oxydiacetate (oda) as bridging ligand, with general formula [Ln₂M₃(oda)₆(H₂O)₆] · xH₂O. The complexes can adopt more than one polymorphic structure, being the hexagonal (P6/mcc) and cubic (Fd3c) the most noticeable, as determined by x-ray powder diffraction. The influence of Ln and M on the solid-state structure is discussed. In addition, potentiometric studies are performed to support the existence of polynuclear species in solution.     

Preparation and Characterization of Lacunary Heteropolymolbdophosphates Coordinated with Divalent Metal Ions of the Fourth Period

ＰｒｅｐａｒａｔｉｏｎａｎｄＣｈａｒａｃｔｅｒｉｚａｔｉｏｎｏｆＬａｃｕｎａｒｙＨｅｔｅｒｏｐｏｌｙｍｏｌｂｄｏｐｈｏｓｐｈａｔｅｓＣｏｏｒｄｉｎａｔｅｄｗｉｔｈＤｉｖａｌｅｎｔＭｅｔａｌＩｏｎｓｏｆｔｈｅＦｏｕｒｔｈＰｅｒｉｏｄＱＩＮＤｕ－ｊｉｅａ...     

Studies on Synthesis of a Cycloheptapeptide and Effects of Different Metal Ions on the Cyclization

ＩｎｔｒｏｄｕｃｔｉｏｎＣｙｃｌｉｃｐｅｐｔｉｄｅｓ ,ｗｈｉｃｈａｒｅｃｏｎｓｔｒａｉｎｅｄｃｏｎｆｏｒｍａ ｔｉｏｎａｌｌｙａｎｄｍｏｒｅｒｅｓｉｓｔａｎｔｔｏｐｒｏｔｅａｓｅｄｉｇｅｓｔｉｏｎｓｔｈａｎｔｈｅｉｒｌｉｎｅａｒｐｒｅｃｕｒｓｏｒｓ ,ｈａｖｅｂｅｅｎｏｆｇｒｅａｔｉｎｔｅｒｅｓｔａｓｓｙｎｔｈｅｔｉｃｔａｒｇｅｔｓｂｏｔｈａｓｐｏｔｅｎｔｉａｌｄｒｕｇｌｅａｄｓａｎｄａｓｍｏｄｅｌｓｆｏｒｃｏｎ ｆｏｒｍａｔｉｏｎａｌａｎａｌｙｓｉｓ .1 4 Ｃｕｒｒｅｎｔｍｅｔｈｏｄｓｆｏｒｓｙｎｔ…     

Study of Activation and Inhibition of Certain Metal Ions to Amylase Catalyzed Reaction by Microcalorimetry

IntroductionMostcomplicatedreactionshappenedinlivingcrea tures ,amongthemenzymecatalyzedreactionisanimpor tantclass .Itissignificantinboththeoryandpracticetoinvestigateenzymecatalyzedreaction .Therearemanyex perimentalmethodssuchasspectrophotometry ,titrimetry ,isotopemethod ,microcalorimetryandsoon ,inwhichmi crocalorimetryisanewoneduetoitshighsensitivityandaccuracy .Wecanstudythewholeprocessoftheheatef fectusingamicrocalorimeter .Sincetheabsorptionorpro ductionofheatisanintrinsicpropertyofe…     

Hydrothermal Synthesis,Crystal Structure and Thermal Property of a Coordination Polymer Constructed by Ce(Ⅲ) and Succinate Ions

A new three-dimensional coordination polymer [Ce_2(C_4H_4O_4)_3(H_2O)_2]_n·3.2 nH_2 O, constructed by Ce(Ⅲ) ion and succinate ion and lattice water molecules has been synthesized under hydrothermal conditions. It crystallizes in triclinic system, space group P1 with a = 7.8865(6), b = 12.0260(8), c = 12.2598(9) ?, α = 112.456(2)o, β = 90.046(2)o, γ = 100.423(2)o, Mr = 722.14, V = 1053.73(13) ?~3, Z = 2, Dc = 2.276 g/cm~3, μ = 4.35/mm, F(000) = 696, GOF = 1.029, R = 0.0203 and w R = 0.0570. The asymmetric unit contains two Ce~(3+) cations and both of them are nine-coordinated and their coordination geometries can be described as two distorted monocapped square antiprisms. In the title compound, a three-dimensional coordination network with one-dimensional hexagon honeycomb-like channels along the a axis is generated. TG measurement has been carried out, and its result analysis along with the powder XRD determination indicates the residue to be CeO_2.     

Complexation Studies of Pyridyl Sulfonamide Ligands for Sensing Zinc and Copper Ions

Ligand protonation and stepwise dissociation constants, formation constants and speciation of four pyridyl sulfonamide ligands (Congreeve et al., New J. Chem. 27:98–106, 2003) were assessed, using potentiometric and UV/Visible spectrophotometric pH titrations (in 80% MeOH − 20% H₂O). The suitability of these ligands as Cu(II) and Zn(II) sensors for physiological applications was assessed. Two ligands L¹ and L⁴ were p-toluenesulfonamide derivatives while L² and L³ were triflurosulfonamide derivatives. Additionally L³ and L⁴ were appended with α-methyl groups. The most stable complex was formed by L¹ with Cu(II) owing to the fact that this complex was square planar (log ₁₀  K ₁=12.15±0.004 and log ₁₀  β ₂=15.42±0.006). The rest of the complexes invariably formed distorted tetrahedron geometry and complexation was weaker. Speciation diagrams show the effect of ligand to metal concentration, revealing that the L² and L³ ligands are the most suitable for forming ML₂ complexes at physiological pH.     

Synthesis,Crystal Structure,and Visible Light Responses of Ti4Cu4-Oxo Clusters with Mixed Valence Copper Ions

Summaryof main observation and conclusion In order to extend the absorption spectrum of polyoxo-titanium clusters into the visible region,two new heterometal-oxo clusters Ti4CuII2CuI2(μ3-O)6(benzoate)10(MeCN)4(PTC-153)and Ti4CuII2CuI2(μ3-O)6(benzoate)8(CH3COO)2(MeCN)4(PTC-154)were success-fully synthesized.Single-crystal X-ray diffraction and X-ray photoelectron spectroscopy studies showed that these two heterometallic Ti4Cu4-oxo clusterspossessed Chinese knot-shape structure and mixed valence Cu^1+/2+ions.UV-visible spectroscopyanalysis demonstrated that the visible light region ab-sorption of PTC-153and PTC-154 could be significantly enhanced by doping copper.Furthermore,their visible-light driven photocurrent responses were studied by using samples of PTC-153and PTC-154as electrode precursors.     

Generation of α,β-Unsaturated Iminium Ions by Laser Flash Photolysis

Two at a time: α,β-Unsaturated iminium ions can be generated by laser flash photolysis of enaminophosphonium ions. The rate constants of their reactions with nucleophiles provide the first direct comparison of the electrophilicities of iminium ions derived from MacMillan's first- and second-generation catalysts.