Nanomagnetically modified thioglycolic acid (γ‐Fe2O3@SiO2‐SCH2CO2H): Efficient and reusable green catalyst for the one‐pot domino synthesis of spiro[benzo[a]benzo[6,7]chromeno[2,3‐c]phenazine] and benzo[a]benzo[6,7]chromeno[2,3‐c]phenazines

Superparamagnetic nanoparticles of modified thioglycolic acid (γ‐Fe₂O₃@SiO₂‐SCH₂CO₂H) represent a new, efficient and green catalyst for the one‐pot synthesis of novel spiro[benzo[a ]benzo[6,7]chromeno[2,3‐c ]phenazine] derivatives via domino Knoevenagel–Michael–cyclization reaction of 2‐hydroxynaphthalene‐1,4‐dione, benzene‐1,2‐diamines, ninhydrin and isatin. This novel magnetic organocatalyst was easily isolated from the reaction mixture by magnetic decantation using an external magnet and reused at least six times without significant loss in its activity. The catalyst was fully characterized using various techniques. This procedure was also applied successfully for the synthesis of benzo[a ]benzo[6,7]chromeno[2,3‐c ]phenazines.     

Reductive Elimination of Phenylsulfonyl Groups in the 3‐Position of Benzo[a]heptalene‐2,4‐diols

3‐(Phenylsulfonyl)benzo[a]heptalene‐2,4‐diols 1 can be desulfonylated with an excess of LiAlH₄/MeLi?LiBr in boiling THF in good yields (Scheme 6). When the reaction is run with LiAlH₄/MeLi, mainly the 3,3′‐disulfides 6 of the corresponding 2,4‐dihydroxybenzo[a]heptalene‐3‐thiols are formed after workup (Scheme 7). However, the best yields of desulfonylated products are obtained when the 2,4‐dimethoxy‐substituted benzo[a]heptalenes 2 are reduced with an excess of LiAlH₄/TiCl₄ at ?78→20° in THF (Scheme 10). Attempts to substitute the PhSO₂ group of 2 with freshly prepared MeONa in boiling THF led to a highly selective ether cleavage of the 4‐MeO group, rather than to desulfonylation (Scheme 13).     

One‐pot Combinatorial Synthesis of Benzo[4,5]imidazo‐[1,2‐a]thiopyrano[3,4‐d]pyrimidin‐4(3H)‐one Derivatives

A series of novel fused tetracyclic benzo[4,5]imidazo[1,2‐a]thiopyrano[3,4‐d]pyrimidin‐4(3H)‐one derivatives were synthesized via the reaction of aryl aldehyde, 2H‐thiopyran‐3,5(4H,6H)‐dione, and 1H‐benzo[d]imidazol‐2‐amine in glacial acetic acid. This protocol features mild reaction conditions, high yields and short reaction time.     

Polypyrrole/Fe3O4/CNT as a recyclable and highly efficient catalyst for one‐pot three‐component synthesis of pyran derivatives

Polypyrrole (PPY)/Fe₃O₄/CNT has been synthesized and characterized by FT‐IR, TEM and SEM techniques and its catalytic activity has been evaluated in the synthesis of several series of pyran derivatives. Tetrahydrobenzo[b]pyranes, 4H‐pyran‐3‐carboxylates, 4H,5H‐pyrano[3,2‐c]chromenes and dihydropyrano[2,3‐c]pyrazoles have been successfully prepared from one‐pot three‐component condensation of aldehyde, malononitrile and active methylene‐containing compounds (dimedone /ethyl acetoacetate/4‐hydroxycoumarin/3‐methyl‐2‐pyrazoline‐5‐one) using PPY/Fe₃O₄/CNT as a new and reusable heterogeneous catalyst. The present method offer several advantages such as; high yields of products, short reaction times, easy work‐up procedure and easy separation of the catalyst from the reaction mixture due to its magnetic character. Furthermore, chemoselective synthesis of bis‐benzo[b]pyran from terephthalaldehyde can be achieved by this method.     

On the Formation of 2‐Sulfonylbenzo[a]heptalene‐1,3‐diols as Precursors for the Synthesis of Colchicinoids

The benzo[a]heptalene formation from 4‐[(R‐sulfonyl)acetyl]heptalene‐5‐carboxylates 15 and 5‐[(R‐sulfonyl)acetyl]heptalene‐4‐carboxylates 16 (R=Ph or morpholino) in the presence of R′SO₂CH₂Li and BuLi has been investigated (Scheme 6). Only the sulfonyl moiety linked to the C?O group at C(4) of the heptalene skeleton is found at C(3) of the formed benzo[a]heptalene‐2,4‐diols 3 in accordance with the general mechanism of their formation (Scheme 3). Intermediates that might rearrange to corresponding 2‐sulfonylbenzo[a]heptalene‐1,3‐diols lose HO^? under the reaction conditions to yield the corresponding cyclopenta[d]heptalenones of type 11 (Schemes 6 and 7). However, the presence of an additional Me group at C(α) of the lithioalkyl sulfones suppresses the loss of HO^?, and 4‐methyl‐2‐sulfonylbenzo[a]heptalene‐1,3‐diols of type 4c have been isolated and characterized for the first time (Schemes 8 and 10). A number of X‐ray crystal‐structure analyses of starting materials and of the new benzo[a]heptalenes have been performed. Finally, benzo[a]heptalene 4c has been transformed into its 1,2,3‐trimethoxy derivative 23 , a benzo[a]heptalene with the colchicinoid substitution pattern at ring A (Scheme 11).     

A one‐pot green synthesis of 2‐amino‐4H‐benzo[h]chromenes catalyzed by a dioxomolybdenum Schiff base complex supported on magnetic nanoparticles as an efficient and recyclable nanocatalyst

In this work, catalytic performance of a molybdenum Schiff base complex‐supported magnetic support as a nanocatalyst was evaluated for the preparation of 2‐amino‐4H‐benzo[h]chromenes through one‐pot, three component reactions of 1‐naphthol, various aldehydes, and malononitrile under solvent‐free conditions. A promising greener and eco‐friendly method with a short reaction time, high yield of products, and simple work‐up procedure was achieved. The nanocatalyst could be easily separated and regenerated from reaction media by an external magnet and reused at least seven consecutive times with small drops in its catalytic performance.     

Alkylation Reactions at the Benzo Moiety of 2,4‐Dimethoxy‐3‐(phenylsulfonyl)benzo[a]heptalenes – Model Compounds of Colchicinoids

Alkylation reactions of 3‐(X‐sulfonyl)benzo[a]heptalene‐2,4‐diols (X=Ph, morpholin‐4‐yl) and their dimethyl ethers were studied. The diols form with K₂CO₃/MeI in aqueous media the 1‐methylated benzoheptalenes, but in yields not surpassing 20% (Table 1). On the other hand, 2,4‐dimethoxybenzo[a]heptalenes can easily be lithiated at C(3) with BuLi and then treated with alkyl iodides to give the 3‐alkylated forms in good yield (Table 2). Surprising is the reaction with two equiv. or more of t‐BuLi since the alkylation at C(4) is accompanied by the reductive elimination of the X‐sulfonyl group at C(3) (Table 3). Most exciting is also the course of 2,4‐dimethoxy‐3‐(phenylsulfonyl)benzo[a]heptalenes in the presence of an excess of MeLi. After the expected exchange of MeO against Me at C(4) (Scheme 6), rearrangement takes place under formation of 4‐benzyl‐2‐methoxybenzo[a]heptalenes and concomitant loss of the sulfonyl group at C(3) (Table 4). In the case of X=morpholin‐4‐yl, rearrangement cannot occur. However, the intermediate benzyl anions of Type E (Scheme 8) react easily with O₂ of the air to build up corresponding benzo[a]heptalene‐4‐methanols (Table 6).     

One‐Pot Synthesis of Hydroxy Pyrazolo[1,2‐a][1,2,4]triazoles and Their Dehydration Using Recyclable Ionic Liquids as Reaction Media

An eco‐friendly, simple, and efficient one‐pot new procedure has been developed for the synthesis of hydroxy phenylhexahydropyrazolo[1,2‐a][1,2,4]triazoles by condensation of 4‐phenylurazole, aldehydes, and ethyl/methyl acetoacetate using ionic liquid [bmim]BF₄ in presence of l ‐proline at 80°C. The hydroxy pyrazolo[1,2‐a][1,2,4]triazoles could be dehydrated in presence of [bmim]HSO₄ to give corresponding phenyltetrahydropyrazolo[1,2‐a][1,2,4]triazoles in high yields. High yields, less reaction time, operational simplicity, and recyclability of reaction media are the advantages of this protocol.     

Benzo[a]heptalenes from Heptaleno[1,2‐c]furans. Part 2

It is shown in this ‘Part 2’ that heptaleno[1,2‐c]furans 1 react thermally in a Diels–Alder‐type [4+2] cycloaddition at the furan ring with vinylene carbonate (VC), phenylsulfonylallene (PSA), α‐(acetyloxy)acrylonitrile (AAN), and (1Z)‐1,2‐bis(phenylsulfonyl)ethene (ZSE) to yield the corresponding 1,4‐epoxybenzo[d]heptalenes (cf. Schemes 1, 5, 6, and 8). The thermal reaction of 1a and 1b with VC at 130° and 150°, respectively, leads mainly to the 2,3‐endo‐cyclocarbonates 2,3‐endo‐ 2a and ‐ 2b and in minor amounts to the 2,3‐exo‐cyclocarbonates 2,3‐exo‐ 2a and ‐ 2b . In some cases, the (P*)‐ and (M*)‐configured epimers were isolated and characterized (Scheme 1). Base‐catalyzed cleavage of 2,3‐endo‐ 2 gave the corresponding 2,3‐diols 3 , which were further transformed via reductive cleavage of their dimesylates 4 into the benzo[a]heptalenes 5a and 5b , respectively (Scheme 2). In another reaction sequence, the 2,3‐diols 3 were converted into their cyclic carbonothioates 6 , which on treatment with (EtO)₃P gave the deoxygenated 1,4‐dihydro‐1,4‐epoxybenzo[d]heptalenes 7 . These were rearranged by acid catalysis into the benzo[a]heptalen‐4‐ols 8a and 8b , respectively (Scheme 2). Cyclocarbonate 2,3‐endo‐ 2b reacted with lithium diisopropylamide (LDA) at ?70° under regioselective ring opening to the 3‐hydroxy‐substituted benzo[d]heptalen‐2‐yl carbamate 2,3‐endo‐ 9b (Scheme 3). The latter was O‐methylated to 2,3‐endo‐(P*)‐ 10b . The further way, to get finally the benzo[a]heptalene 13b with MeO groups in 1,2,3‐position, could not be realized due to the fact that we found no way to cleave the carbamate group of 2,3‐endo‐(P*)‐ 10b without touching its 1,4‐epoxy bridge (Scheme 3). The reaction of 1a with PSA in toluene at 120° was successful, in a way that we found regioisomeric as well as epimeric cycloadducts (Scheme 5). Unfortunately, the attempts to rearrange the products under strong‐base catalysis as it had been shown successfully with other furan–PSA adducts were unsuccessful (Scheme 4). The thermal cycloaddition reaction of 1a and 1b with AAN yielded again regioisomeric and epimeric adducts, which could easily be transformed into the corresponding 2‐ and 3‐oxo products (Scheme 6). Only the latter ones could be rearranged with Ac₂O/H₂SO₄ into the corresponding benzo[a]heptalene‐3,4‐diol diacetates 20a and 20b , respectively, or with trimethylsilyl trifluoromethanesulfonate (TfOSiMe₃/Et₃N), followed by treatment with NH₄Cl/H₂O, into the corresponding benzo[a]heptalen‐3,4‐diols 21a and 21b (Scheme 7). The thermal cycloaddition reaction of 1 with ZSE in toluene gave the cycloadducts 2,3‐exo‐ 22a and ‐ 22b as well as 2‐exo,3‐endo‐ 22c in high yields (Scheme 8). All three adducts eliminated, by treatment with base, benzenesulfinic acid and yielded the corresponding 3‐(phenylsulfonyl)‐1,4‐epoxybenzo[d]heptalenes 25 . The latter turned out to be excellent Michael acceptors for H₂O₂ in basic media (Scheme 9). The Michael adducts lost H₂O on treatment with Ac₂O in pyridine and gave the 3‐(phenylsulfonyl)benzo[d]heptalen‐2‐ones 28a and 3‐exo‐ 28b , respectively. Rearrangement of these compounds in the presence of Ac₂O/AcONa lead to the formation of the corresponding 3‐(phenylsulfonyl)benzo[a]heptalene‐1,2‐diol diacetates 30a and 30b , which on treatment with MeONa/MeI gave the corresponding MeO‐substituted compounds 31a and 31b . The reductive elimination of the PhSO₂ group led finally to the 1,2‐dimethoxybenzo[a]heptalenes 32a and 32b . Deprotonation experiments of 32a with t‐BuLi/N,N,N′,N′‐tetramethylethane‐1,2‐diamine (tmeda) and quenching with D₂O showed that the most acid C? H bond is H? C(3) (Scheme 9). Some of the new structures were established by X‐ray crystal‐diffraction analyses (cf. Figs. 1, 3, 4, and 5). Moreover, nine of the new benzo[a]heptalenes were resolved on an anal. Chiralcel OD‐H column, and their CD spectra were measured (cf. Figs. 8 and 9). As a result, the 1,2‐dimethoxybenzo[a]heptalenes 32a and 32b showed unexpectedly new Cotton‐effect bands just below 300 nm, which were assigned to chiral exciton coupling between the heptalene and benzo part of the structurally highly twisted compounds. The PhSO₂‐substituted benzo[a]heptalenes 30b and 31b showed, in addition, a further pair of Cotton‐effect bands in the range of 275–245 nm, due to chiral exciton coupling of the benzo[a]heptalene chromophore and the phenylsulfonyl chromophore (cf. Fig. 10).     

Synthesis and Reactions of Some New Benzo[a]phenothiazine‐3,4‐dione Derivatives

The reaction of 2,3‐dihydro‐2,3‐epoxy‐1,4‐naphthoquinone ( 4 ) with substituted anilines furnished the corresponding benzo[fused]heterocyclic derivatives 5 , 6 , 6a , 6b , 7 , 8 . Furthermore, treatment of benzo[a]phenothiazine derivative 7 with halo compounds, namely, ethyl bromoacetate, phenacyl bromide, dibromoethane, or chloroacetone afforded ether derivatives 11 , 12 , 13 , 14 , respectively. Moreover, the reaction of 11 with o‐substituted aniline gave the corresponding benzo[a]phenothiazin‐5‐one derivatives 15 , 16 , 17 and benzo[d][1,3]oxazin‐4‐one 18 , respectively. Finally, the chromenone derivative 19 was synthesized via the reaction of ester derivative 11 with salicyaldhyde in refluxing pyridine. The newly synthesized compounds were characterized by spectroscopic measurements (IR, ¹H NMR, ¹³C NMR, and mass spectra).     

离子液体中一步合成14-芳基-1,6,7,14-四氢二苯并[a, i]吖啶-1,6-二酮衍生物

室温条件下在离子液体[bmim]BF4中合成了14-芳基-1,6,7,14-四氢二苯并[a, i]吖啶-1,6-二酮类衍生物,该方法具有产率高,反应介质可回收使用,反应底物范围广,反应时间短,操作简单等优点。     

Diversity‐oriented One‐pot Synthesis of Novel Imidazo[4′,5′:4,5]benzo[e][1,4]thiazepinones and Benzo[d]imidazolyl Thiazolidinones through pTSA Promoted Cyclization and Evaluation of Antimicrobial and Anti‐inflammatory Activities

In contrast to target‐oriented synthesis that aims to access precise regions of chemistry, diversity‐oriented synthesis via multicomponent synthesis populates chemical space broadly with small molecules having diverse structures. This study has achieved the diversity‐oriented synthesis of novel imidazo[4′,5′:4,5]benzo[e][1,4]thiazepinones ( 4 ) and benzo[d]imidazolyl thiazolidinones ( 5 ) controlled by the nature of substitution effect of the reaction component. The one‐pot reaction of benzimidazole 1 , aromatic aldehyde 2 , and mercaptoacetic acid 3 leads to the formation of imidazo[4′,5′:4,5]benzo[e][1,4]thiazepinones ( 4 ) with electron‐donating groups as substitution on aromatic aldehyde while electron‐withdrawing substitutions produced benzo[d]imidazolyl thiazolidinones ( 5 ). The title compounds ( 4 ) and ( 5 ) were evaluated for their antimicrobial and anti‐inflammatory activities.     

One‐Pot Synthesis of 5,7,8,9,9a,10‐Hexahydro‐8‐thioxotetrahydropyrido[2,3‐d : 6,5‐d′]dipyrimidine‐2,4,6(1H,3H,5aH)‐triones via a Four‐Component Coupling Reaction of Aldehydes,Amines, Barbituric Acids,and Thiouracil

An efficient one‐pot approach to the synthesis of 5,7,8,9,9a,10‐hexahydro‐8‐thioxopyrido[2,3‐d : 6,5‐d′]dipyrimidine‐2,4,6(1H,3H,5aH)‐triones 5 via a four‐component reaction of an aldehyde 1 , an amine 2 , a barbituric acid 3 , and thiouracil ( 4 ) is reported for the first time. This new multicomponent reaction is accomplished in refluxing EtOH in the presence of tungstophosphoric acid (H₃PW₁₂O₄₀) as a catalyst. A variety of hexahydropyrido[2,3‐d : 6,5‐d′]dipyrimidinetrione derivatives were successfully synthesized in excellent yields with this protocol (Table 2).     

Synthesis and Crystal Structure of 4,7‐Diaryl‐5‐oxo‐4H‐benzo[b]pyran Derivatives

A green and convenient approach to the synthesis of a series of 4,7‐diaryl‐5‐oxo‐4H‐benzo[b]pyran derivatives from appropriate aromatic aldehydes and 5‐aryl‐1,3‐cyclohexanedione with malononitrile in the presence of dilute HCl as catalyst (30 mmol/L) is described. This method provides several advantages such as environmental friendliness, low cost, high yields, and simple work up procedure. The structures of all compounds were characterized by infrared (IR), mass spectrometry (MS), ¹H NMR, and elemental analysis. The crystal structure of trans/cis‐2‐amino‐3‐cyano‐7‐(4′‐methoxo‐phenyl)‐4‐phenyl‐5‐oxo‐4H‐benzo[b]pyran, g , was determined by single crystal X‐ray diffraction analysis. The crystal of compound g belongs to monoclinic with space group P 21/c, a = 8.477(3) nm, b = 18.948(6) nm, c = 24.915(7) nm, α = 90.00°, β = 107.388(11)°, γ= 90.00°, Z = 8, V = 3.819(2) nm³, R₁ = 0.0754, wR₂ = 0.2042.     

A concise,efficient and versatile synthesis of amino‐substituted benzo[b]pyrimido[5,4‐f]azepines: synthesis and spectroscopic characterization,together with the molecular and supramolecular structures of three products and one intermediate

A concise, efficient and versatile synthesis of amino‐substituted benzo[b]pyrimido[5,4‐f]azepines is described: starting from a 5‐allyl‐4,6‐dichloropyrimidine, the synthesis involves base‐catalysed aminolysis followed by intramolecular Friedel–Crafts cyclization. Four new amino‐substituted benzo[b]pyrimido[5,4‐f]azepines are reported, and all the products and reaction intermediates have been fully characterized by IR, ¹H and ¹³C NMR spectroscopy and mass spectrometry, and the molecular and supramolecular structures of three products and one intermediate have been determined. In each of N,2,6,11‐tetramethyl‐N‐phenyl‐6,11‐dihydro‐5H‐benzo[b]pyrimido[5,4‐f]azepin‐4‐amine, C₂₂H₂₄N₅, (III), 4‐(1H‐benzo[d]imidazol‐1‐yl)‐6,11‐dimethyl‐6,11‐dihydro‐5H‐benzo[b]pyrimido[5,4‐f]azepine, which crystallizes as a 0.374‐hydrate, C₂₁H₁₉N₅·0.374H₂O, (VIIIa), and 6,7,9,11‐tetramethyl‐4‐(5‐methyl‐1H‐benzo[d]imidazol‐1‐yl)‐6,11‐dihydro‐5H‐benzo[b]pyrimido[5,4‐f]azepine, C₂₄H₂₅N₅, (VIIIc), the azepine ring adopts a boat conformation, but with a different configuration at the stereogenic centre in (VIIIc), as compared with (III) and (VIIIa). In the intermediate 5‐allyl‐6‐(1H‐benzo[d]imidazol‐1‐yl)‐N‐methyl‐N‐(4‐methylphenyl)pyrimidin‐4‐amine, C₂₂N₂₁N₅, (VIIb), the immediate precursor of 4‐(1H‐benzo[d]imidazol‐1‐yl)‐6,8,11‐trimethyl‐6,11‐dihydro‐5H‐benzo[b]pyrimido[5,4‐f]azepine, (VIIIb), the allyl group is disordered over two sets of atomic sites having occupancies of 0.688 (5) and 0.312 (5). The molecules of (III) are linked into chains by a C—H…π(pyrimidine) hydrogen bond, and those of (VIIb) are linked into complex sheets by three hydrogen bonds, one of the C—H…N type and two of C—H…π(arene) type. The molecules of the organic component in (VIIIa) are linked into a chain of rings by two C—H…π(arene) hydrogen bonds, and these chains are linked into sheets by the water components; a single weak C—H…N hydrogen bond links molecules of (VIIIc) into centrosymmetric R₂²(10) dimers. Comparisons are made with some related compounds.     

A simple synthesis of 4‐chloro‐5‐hydroxy‐1H‐benzo[g]indoles

The reaction of methyl 2‐(3‐chloro‐1,4‐dioxo‐1,4‐dihydronaphthalen‐2‐yl)propenoate ( 2a ) with primary amines gave 4‐chloro‐5‐hydroxy‐3‐methoxycarbonyl‐1H‐benzo[g]indoles 5a‐f as major compounds and 3‐methoxycarbonyl‐4,9‐dioxo‐2,3,4,9‐tetrahydro‐1H‐benzo[f]indoles 6a‐d as minor ones. Whereas the reaction of 3‐(3‐chloro‐1,4‐dioxo‐1,4‐dihydronaphthalen‐2‐yl)‐3‐buten‐2‐one ( 2b ) with primary amines afforded the corresponding 1H‐benzo[g]indoles 5g‐i as major products and 3‐acetyl‐4,9‐dihydro‐4,9‐dioxo‐1H‐benzo[f]indoles 7g, h as minor products.     

Protecting‐Group‐Free Total Synthesis of Isoquinoline Alkaloids by Nickel‐Catalyzed Annulation of o‐Halobenzaldimine with an Alkyne as the Key Step

An efficient short total synthesis of benzo[c]phenanthridine alkaloids including oxyavicine, oxynitidine, and oxysanguinarine is described. Thus, N‐methyl‐o‐bromobenzaldimines 1 b – d undergo regioselective cyclization with 4‐(benzo[d][1,3]dioxol‐5‐yl)but‐3‐yn‐1‐ol ( 2 b ) in the presence of [Ni(cod)₂] (cod=1,5‐cyclooctadiene). In situ oxidation of the resultant isoquinolinium salts gives isoquinolinone derivatives 5 b – d with benzo[d][1,3]dioxol‐5‐yl substitution at the C₃ atom and a (CH₂)₂OH group at the C₄ atom. Later, oxidation of the alcohol group in 5 b – d to the aldehyde moiety followed by acid‐catalyzed cyclization and dehydration completes the total syntheses to give oxyavicine, oxynitidine, and oxysanguinarine in 67, 65, and 60 % yields, respectively. The synthesis requires four steps from o‐bromobenzaldehyde derivatives. Transformations of these alkaloids to the other alkaloids in this family are also discussed herein.     

Synthesis of New [1,2,4]Triazolo[1,5‐a]pyrimidine Derivatives: Reactivity of 3‐Amino[1,2,4]triazole towards Enaminonitriles and Enaminones

A diversity of new 7 ‐substituted[1,2,4]triazolo[1,5‐a]pyrimidine and 6‐substituted[1,2,4]triazolo[1,5‐a]pyrimidine‐7‐amine derivatives has been synthesized via reaction of 3‐amino‐[1,2,4]triazole with enaminonitriles and enaminones. The regio orientation and the structure of the products were confirmed by spectral and analytical data and synthesis via an alternative route. The procedure proved to be simple, efficient, and high yielding, and diversities of [1,2,4]triazolo[1,5‐a]pyrimidines were obtained.     

New Routes to Fused Isoquinolines

Treatment of 6,7‐diethoxy‐3,4‐dihydroisoquinoline ( 8 ) and its 1‐methyl derivative 12 with hydrazonoyl halides 10 in the presence of Et₃N in THF under reflux afforded the corresponding 5,6‐dihydro‐1,2,4‐triazolo[3,4‐a]isoquinolines 11 and 13 , respectively, in high yield (Schemes 2 and 3). The products are formed via regioselective 1,3‐dipolar cycloaddition of the intermediate nitrilimines 9 with the isoquinoline C=N bond. Reaction of 6,7‐diethoxy‐3,4‐dihydroisoquinoline‐1‐acetonitrile ( 4a ) with ethyl α‐cyanocinnamates 15 in the presence of piperidine in refluxing MeCN yielded benzo[a]quinolizin‐4‐ones 16 (Scheme 4). Under the same conditions, 12 and arylidene malononitriles 19 reacted to give benzo[a]quinolizin‐4‐imines 20 (Scheme 5). Instead of 15 and 19 , mixtures of an aromatic aldehyde, and ethyl cyanoacetate or malononitrile, respectively, can be used in a one‐pot reaction.     

Synthesis of Novel Spiro Pyrano[2,3‐d]thiazolo[3,2‐a]pyrimidine via 1,3‐Dipolar Cycloaddition of Azomethine Ylide

The reaction involving 4‐phenyl‐octahydro‐pyrano[2,3‐d]pyrimidine‐2‐thione, ethyl chloroacetate and the appropriate aromatic aldehyde yielded 2‐arylmethylidene‐5‐phenyl‐5a,7,8,9a‐tetrahydro‐5H,6H‐pyrano[2,3‐d][1,3]thiazolo[3,2‐a]pyrimidin‐3(2H)‐ones. The 1,3‐dipolar cycloaddition of 2‐arylmethylidene‐5‐phenyl‐5a,7,8,9a‐tetrahydro‐5H,6H‐pyrano[2,3‐d][1,3]thiazolo[3,2‐a]pyrimidin‐3(2H)‐ones with azomethine ylide generated by a decarboxylative route from sarcosine and acenaphthenequinone afforded 4′‐aryl‐1′‐methyl‐5″‐phenyl‐5a″,7″,8″,9a″‐tetrahydro‐2H,5″H,6″H‐dispiro[acenaphthylene‐1,2′‐pyrrolidine‐3′,2″‐pyrano[2,3‐d][1,3]thiazolo[3,2‐a]pyrimidine]‐2,3″‐diones in moderate yields. The structures of the products were determined and characterized thoroughly by NMR, MS, IR, elemental analysis, and X‐ray crystallographic analysis.