Synthesis and Anti‐HIV Activity of Triazolo‐Fused 2′,3′‐Cyclic Nucleoside Analogs Prepared by an Intramolecular Huisgen 1,3‐Dipolar Cycloaddition

Triazolo‐fused 2′,3′‐cyclic nucleoside analogs were synthesized by an intramolecular 1,3‐dipolar cycloaddition of nucleoside‐derived azido alkynes in a regio‐ and stereospecific manner. The uracil base in these target compounds was successfully transformed to the corresponding cytosine. The synthesized compounds were examined in a MAGI assay for their anti‐HIV activities, and in a H9 T lymphocytes assay for their cell toxicities.     

Synthesis and Anti‐HIV Activity of Triazolo‐Fused 3′,5′‐Cyclic Nucleoside Analogues Derived from an Intramolecular Huisgen 1,3‐Dipolar Cycloaddition

Triazolo‐fused 3′,5′‐cyclic nucleoside analogues were synthesized by an intramolecular 1,3‐dipolar cycloaddition of nucleoside‐derived azido‐alkynes in a regio‐ and stereospecific manner. The thymine nucleoside base in these target compounds was transformed successfully into the corresponding 5‐methylcytosine component. The synthesized compounds were examined in a MAGI assay for exploring the anti‐HIV activity and in a H9 T lymphocytes assay for measuring the cell toxicity.     

Synthesis of Novel 1,2,4‐oxadiazoline Derivatives Containing Quinoline Moiety by 1,3‐Dipolar Cycloaddition

A series of novel 1,2,4‐oxadiazoline derivatives containing 2‐(1,2,4‐triazol‐1‐yl)quinoline were synthesized by the reaction of imines with benzohydroximinoyl chlorides in the presence of Et₃N via 1,3‐diplolar cycloaddition reaction. The structures of the target compounds were confirmed by IR, ¹H NMR, MS, elemental, and X‐ray crystallographic analysis.     

Recyclable Porous Polymer‐Supported Copper Catalysts for Glaser and Huisgen 1,3‐Diolar Cycloaddition Reactions

A family of polymer‐attached phenanthrolines was prepared from solvothermal copolymerization of divinylbenzene with N‐(1,10‐phenanthroline‐5‐yl)acrylamide in different ratios. The polymer‐supported copper catalysts were obtained through typical impregnation with copper(II) salts. The polymers and supported copper catalysts have been characterized by N₂ adsortion, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TG); they exhibit a high surface area, hierarchical porosity, large pore volume, and high thermal and chemical stabilities. The copper catalyst has proved to be highly active for Glaser homocoupling of alkynes and Huisgen 1,3‐diolar cycloaddition of alkynes with benzyl azide under mild conditions at low catalyst loading. The heterogeneous copper catalyst is more active than commonly used homogeneous and nonporous polystyrene‐supported copper catalysts. In particular, the catalyst is easily recovered and can be recycled at least ten times without any obvious loss in catalytic activity. Metal leaching was prevented due to the strong binding ability of phenanthroline and products were not contaminated with copper, as determined by ICP analysis.     

Synthesis of Spirocyclic and Tricyclic Isoxazoline via 1,3‐Dipolar Cycloaddition Reactions

1,3‐Dipolar cycloadditions of the bicyclic monoterpenes (S)‐(?)‐camphene ( 1 ), (R)‐(+)‐a‐pinene ( 2 ), and (S)‐(?)‐b‐pinene ( 3 ) with aryl and heteroaryl nitrile oxides afforded new spirocyclic and tricyclic isoxazoline derivatives 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 whose biological activities were evaluated in bioassay studies.     

Region‐Selective Deposition of Core–Shell Nanoparticles for 3 D Hierarchical Assemblies by the Huisgen 1,3‐Dipolar Cycloaddition

A method for the region‐selective deposition of nanoparticles (NPs) by the Huisgen 1,3‐dipolar cycloaddition is presented. The approach enables defined stacking of various oxide NPs in any order with control over layer thickness. Thereby the reaction is performed between a substrate, functionalized with a self‐assembled monolayer of an azide‐bearing phosphonic acid (PA) and aluminum oxide (AlO_x) NPs functionalized with an alkyne bearing PA. The layer of alkyne functionalized AlO_x NPs is then used as substrate for the deposition of azide‐functionalized indium tin oxide (ITO) NPs to provide a binary stack. This progression is then conducted with alkyne‐functionalized CeO₂ NPs, yielding a ternary stack of NPs with three different NP cores. The stacks are characterized by AFM and SEM, defining the region‐selectivity of the deposition technique. Finally, these assemblies have been tested in devices as a dielectric to form a capacitor resulting in a dramatic increase in the measured capacitance.     

Unexpected 1,3‐Dipolar Cycloaddition Reaction of Thiazolo[3,2‐a]pyrimidine Derivatives and Nitrilimine

The 1,3‐dipolar cycloaddition reactions of nitrilimine with thiazolo[3,2‐a]pyrimidine derivatives was investigated. Bis‐cycloadducts were obtained through a domino 1,3‐dipolar cycloaddition/ring‐opening/ring‐opening/1,3‐dipolar cycloaddition processes. The structures of the products were characterized thoroughly by NMR, IR, MS, elemental analysis together with X‐ray crystallographic analysis.     

Synthesis of Dispiro[indole‐3,2′‐pyrrolidine‐3′,2″‐pyrrolizine]‐1″,2(1H)‐diones via Azomethine Ylide 1,3‐Dipolar Cycloaddition

The 1,3‐dipolar cycloaddition of azomethine ylide generated in situ from isatin and sarcosine to 2‐arylmethylidene‐2,3‐dihydro‐1H‐pyrrolizin‐1‐ones afforded novel 1′‐methyl‐4′‐(aryl)‐1″H‐dispiro[indole‐3,2′‐pyrrolidine‐3′,2″‐pyrrolizine]‐1″,2(1H)‐diones in good yields. The structures of all the products were characterized thoroughly by NMR, infrared spectroscopy, mass spectrum, and elemental analysis.     

The Huisgen Reaction: Milestones of the 1,3‐Dipolar Cycloaddition

The concept of 1,3‐dipolar cycloadditions was presented by Rolf Huisgen 60 years ago. Previously unknown reactive intermediates, for example azomethine ylides, were introduced to organic chemistry and the (3+2) cycloadditions of 1,3‐dipoles to multiple‐bond systems (Huisgen reaction) developed into one of the most versatile synthetic methods in heterocyclic chemistry. In this Review, we present the history of this research area, highlight important older reports, and describe the evolution and further development of the concept. The most important mechanistic and synthetic results are discussed. Quantum‐mechanical calculations support the concerted mechanism always favored by R. Huisgen; however, in extreme cases intermediates may be involved. The impact of 1,3‐dipolar cycloadditions on the click chemistry concept of K. B. Sharpless will also be discussed.     

Intermolecular Reactions of γ‐Halocarbanions – Stepwise Analogs of 1,3‐Dipolar Cycloaddition

γ‐Halocarbanions, short‐lived intermediates, add to electron‐deficient double bonds of aldehydes, Michael acceptors, and imines to form anionic adducts that enter intramolecular 1,5‐substitution to form five‐membered rings of tetrahydrofurans, cyclopentanes, and pyrrolidines, respectively. Although the γ‐halocarbanions can be generated by simple deprotonation of appropriate precursors, a wealth of other methods based on Lewis acid‐catalyzed opening of cyclopropanes with formation of dipolar species utilizes a similar mechanistic scheme. In our review, we analyze kinetic relations of elementary processes in the multistep transformations, and demonstrate how structural factors influence the mechanisms and selectivity of the reaction.     

Highly Enantioselective Intramolecular 1,3‐Dipolar Cycloaddition: A Route to Piperidino‐Pyrrolizidines

Enantioselective catalytic intermolecular 1,3‐dipolar cycloadditions are powerful methods for the synthesis of heterocycles. In contrast, intramolecular enantioselective 1,3‐dipolar cycloadditions are virtually unexplored. A highly enantioselective synthesis of natural‐product‐inspired pyrrolidino‐piperidines by means of an intramolecular 1,3‐dipolar cycloaddition with azomethine ylides is now reported. The method has a wide scope and yields the desired cycloadducts with four tertiary stereogenic centers with up to 99 % ee. Combining the enantioselective catalytic intramolecular 1,3‐dipolar cycloaddition with a subsequent diastereoselective intermolecular 1,3‐dipolar cycloaddition yielded complex piperidino‐pyrrolizidines with very high stereoselectivity in a one‐pot tandem reaction.     

Synthesis,Antimicrobial and Anti‐HIV Activity of Some Novel Benzenesulfonamides Bearing 2,5‐Disubstituted‐1,3,4‐Oxadiazole Moiety

Twelve novel primary ( 4a‐c , 5a‐c ) and secondary ( 4d‐f, 5d‐f ) benzenesulfonamides bearing 2,5‐disubstituted‐1,3,4‐oxadiazole moiety have successfully been prepared by direct chlorosulfonation of phenyl substitutent present on the 2‐position of 5‐mercapto‐1,3,4‐oxadiazoles 2a‐c and their methylhio derivatives 3a‐c using chlorosulfonic acid under anhydrous conditions. Structures of the synthesized compounds were established by their physical and spectral data. Some of the synthesized compounds have been screened in vitro for their antimicrobial and anti‐HIV activity; the results were in accordance with SAR.     

2‐Azido‐2‐deoxycellulose: Synthesis and 1,3‐Dipolar Cycloaddition

Chitosan ( 1 ) was prepared by basic hydrolysis of chitin of an average molecular weight of 70000 Da, ¹H‐NMR spectra indicating almost complete deacetylation. N‐Phthaloylation of 1 yielded the known N‐phthaloylchitosan ( 2 ), which was tritylated to provide 3a and methoxytritylated to 3b . Dephthaloylation of 3a with NH₂NH₂?H₂O gave the 6‐O‐tritylated chitosan 4a . Similarly, 3b gave the 6‐O‐methoxytritylated 4b . CuSO₄‐Catalyzed diazo transfer to 4a yielded 95% of the azide 5a , and uncatalyzed diazo transfer to 4b gave 82% of azide 5b . Further treatment of 5a with CuSO₄ produced 2‐azido‐2‐deoxycellulose ( 7 ). Demethoxytritylation of 5b in HCOOH gave 2‐azido‐2‐deoxy‐3,6‐di‐O‐formylcellulose ( 6 ), which was deformylated to 7 . The 1,3‐dipolar cycloaddition of 7 to a range of phenyl‐, (phenyl)alkyl‐, and alkyl‐monosubstituted alkynes in DMSO in the presence of CuI gave the 1,2,3‐triazoles 8 – 15 in high yields.     

Synthesis of (3‐N‐substituted‐piperidin‐4‐ylidene)acetic Acid Ethyl Esters

A convenient preparation of skeletons 2A and 2B (cyclic γ,δ‐diamino‐α,β‐unsaturated esters) is reported by a three‐step synthetic route based on a sequence of NBS‐mediated one‐pot α‐bromination/Wittig olefination of piperidin‐4‐one 3 , nucleophilic addition with NaN₃, and followed by PPh₃‐promoted Staudinger reduction/substitution or CuI‐catalyzed Huisgen 1,3‐dipolar cycloaddition.     

1,3‐Dipolar Cycloaddition of Nitrones with Electron‐rich Alkenes Catalyzed by Yb(OTf)3

1,3‐Dipolar cycloaddition of nitrones with ethyl vinyl ether or 2,3‐dihydrofuran proceeds smoothly in the presence of a catalytic amount (10 mol%) of ytterbium triflate to afford isoxazolidines and dicyclic isoxazolidine respectively with good yields and high stereoselectivity.     

Copper/Graphene/Clay Nanohybrid: A Highly Efficient Heterogeneous Nanocatalyst for the Synthesis of Novel 1,2,3‐Triazolyl Carboacyclic Nucleosides via ‘Click’ Huisgen 1,3‐Dipolar Cycloaddition

A very mild and highly efficient synthesis of some novel 1H‐1,2,3‐triazolyl carboacyclic nucleosides via a ‘Click’ Huisgen cycloaddition of N‐propargyl nucleobases and azido alcohols using Cu/aminoclay/reduced graphene oxide nanohybrid (Cu/AC/r‐GO nanohybrid) as nanocatalyst is described. The preparation and characterization of Cu/AC/r‐GO nanohybrid are discussed. This catalyst was characterized by X‐ray diffraction, FT‐IR, TEM, and energy‐dispersive analysis of X‐ray techniques. Cu/AC/r‐GO nanohybrid is a stable and highly efficient heterogeneous nanocatalyst that can be easily prepared, used, and restored from the reaction mixture by simple filtration, and reused for many consecutive trials without significant decrease in activity.