One‐Pot Synthesis of 3‐Alkoxy‐2,3‐dihydro‐1H‐isoindol‐1‐ones by the Reactions of 2‐(Azidomethyl)benzoates with NaH

A new and facile method for the general preparation of 3‐alkoxy‐2,3‐dihydro‐1H‐isoindol‐1‐ones has been developed. Thus, the reaction of 2‐(azidomethyl)benzoates with NaH affords, after workup with H₂O, 3‐alkoxy‐2,3‐dihydro‐1H‐isoindol‐1‐ones 2 . 2‐Substituted 3‐alkoxy‐2,3‐dihydro‐1H‐isoindol‐1‐ones 4 can be obtained by adding alkyl halides prior to workup with H₂O.     

Hydriodic Acid‐Mediated Cyclization of α‐Substituted Secondary 2‐Ethenylbenzamides: Synthesis of 2‐Substituted 2,3‐Dihydro‐3,3‐dimethyl‐1H‐isoindol‐1‐ones and 3,3‐Disubstituted (E)‐1‐(Arylimino)‐1,3‐dihydroisobenzofurans

A new and facile method for the preparation of 2‐substituted 2,3‐dihydro‐3,3‐dimethyl‐1H‐isoindol‐1‐ones 3 and 3,3‐disubstituted (E)‐1‐(arylimino)‐1,3‐dihydroisobenzofurans 6 has been developed. Thus, treatment of N‐alkyl(or aryl)‐2‐(1‐methylethen‐1‐yl)benzamides 2 with concentrated hydriodic acid (HI) in MeCN at room temperature afforded 3 . Similar treatment of N‐aryl‐2‐(1‐phenylethen‐1‐yl)benzamide 5 with concentrated HI at 0° afforded 6 .     

A Convenient Synthesis of 2,3‐Dihydro‐3‐methylidene‐1H‐isoindol‐1‐ones by Reaction of 2‐Formylbenzo­nitriles with Dimethyloxosulfonium Methylide

A facile method for the synthesis of 2,3‐dihydro‐3‐methylidene‐1H‐isoindol‐1‐one and its derivatives carrying substituent(s) at C(5) and/or C(6) has been developed. The reaction of 2‐formylbenzonitrile ( 1a ) with dimethyloxosulfonium methylide, generated by the treatment of trimethylsulfoxonium iodide with NaH in DMSO/THF at 0°, resulted in the formation of 2,3‐dihydro‐3‐methylidene‐1H‐isoindol‐1‐one ( 2a ) in 77% yield. Similarly, six 2‐formylbenzonitriles carrying substituent(s) at C(4) and/or C(5), i.e., 1b – 1g , also gave the corresponding expected products 2b – 2g in comparable yields.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones by Pummerer‐Type Cyclization of N‐Aryl‐2‐(sulfinylmethyl)benzamides

An efficient method for the synthesis of 2‐aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones 1 via Pummerer‐type cyclization of N‐aryl‐2‐(sulfinylmethyl)benzamides 2 is described. Thus, treatment of these sulfinyl‐benzamides 2 , easily prepared from 2‐(bromomethyl)benzoates 3 in three steps, with Ac₂O at ca. 100° resulted in the formation of the desired isoindolones 1 in generally good yields.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones by Deprotective Cyclization of N‐{3‐[(2E)‐3‐Arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides in Water

A new and convenient method for the preparation of 2‐aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones 4 has been developed. Thus, N‐{3‐[(2E)‐3‐arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides 3 are synthesized from commercially available pyridin‐2‐amine using an easily performed three‐step sequence and are subjected to cyclization with deprotection under acidic conditions in H₂O to give the desired products. Similarly, 2‐aryl‐2,3‐dihydro‐1,7‐naphthyridin‐4(1H)‐ones 8 and 2‐aryl‐2,3‐dihydro‐1,6‐naphthyridin‐4(1H)‐ones 12 can be prepared from pyridin‐3‐amine and pyridin‐4‐amine, respectively.     

New Approaches to the Synthesis of 4‐(2‐Aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones and 3‐Ureidoindoles and a Study of Their Interconversion

3‐Alkyl/aryl‐3‐ureido‐1H,3H‐quinoline‐2,4‐diones ( 2 ) and 3a‐alkyl/aryl‐9b‐hydroxy‐3,3a,5,9b‐tetrahydro‐1H‐imidazo[4,5‐c]quinoline‐2,4‐diones ( 3 ) react in boiling concentrated HCl to give 5‐alkyl/aryl‐4‐(2‐aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones ( 6 ). The same compounds were prepared by the same procedure from 2‐alkyl/aryl‐3‐ureido‐1H‐indoles ( 4 ), which were obtained from the reaction of 3‐alkyl/aryl‐3‐aminoquinoline‐2,4(1H,3H)‐diones ( 1 ) with 1,3‐diphenylurea or by the transformation of 3a‐alkyl/aryl‐9b‐hydroxy‐3,3a,5,9b‐tetrahydro‐1H‐imidazo[4,5‐c]quinoline‐2,4‐diones ( 3 ) and 5‐alkyl/aryl‐4‐(2‐aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones ( 6 ) in boiling AcOH. The latter were converted into 1,3‐bis[2‐(2‐oxo‐2,3‐dihydro‐1H‐imidazol‐4‐yl)phenyl]ureas ( 5 ) by treatment with triphosgene. All compounds were characterized by ¹H‐ and ¹³C‐NMR and IR spectroscopy, as well as atmospheric pressure chemical‐ionisation mass spectra.     

Synthesis of Optically Active 1‐(1‐Phenylethyl)‐1H‐imidazoles Derived from 1‐Phenylethylamine

The three‐component reaction of (R)‐ or (S)‐1‐phenylethylamine ( 6 ), formaldehyde, and an α‐(hydroxyimino) ketone 5 , i.e., 3‐(hydroxyimino)butan‐2‐one ( 5a ) or 2‐(hydroxyimino)‐1,2‐diphenylethanone ( 5b ), yields the corresponding enantiomerically pure 1‐(1‐phenylethyl)‐1H‐imidazole 3‐oxide 7 in high yield (Schemes 2 and 3). The reactions are carried out either in MeOH or in AcOH. Smooth transformations of the N‐oxides into optically active 1‐(1‐phenylethyl)‐1H‐imidazoles 10 and 2,3‐dihydro‐1‐(1‐phenylethyl)‐1H‐imidazole‐2‐thiones 11 are achieved by treatment of 7 with Raney‐Ni and 2,2,4,4‐tetramethyl‐3‐thioxocyclobutanone ( 12 ), respectively (Scheme 4).     

A Convenient Synthesis of 2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridin‐4‐ones by the Reaction of the Corresponding 1‐(Chloropyridinyl)alk‐2‐en‐1‐ones with NaSH

2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]pyridin‐4‐ones 4 were prepared by a three‐step sequence from commercially available 2‐chloropyridine ( 1 ). Thus, successive treatment of 1 with ⁱPr₂NLi (LDA) and α,β‐unsaturated aldehydes gave 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ols 2 , which were oxidized with MnO₂ to 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ones 3 . The reactions of 3 with NaSH?n H₂O proceeded smoothly at 0° in DMF to provide the desired thiopyranopyridinones. Similarly, 2,3‐dihydro‐4H‐thiopyrano[2,3‐c]pyridin‐4‐ones 8 and 2,3‐dihydro‐4H‐thiopyrano[3,2‐c]pyridin‐4‐ones 12 were obtained starting from 3‐chloropyridine ( 5 ) and 4‐chloropyridine ( 9 ), respectively.     

A Novel and Efficient Synthesis of 3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐ones (=3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐1‐benzopyran‐2‐ones)

An efficient one‐pot synthesis of 3‐[(4,5‐dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐one (=3‐[(4,5‐dihydro‐1H‐pyrrol‐3yl)carbonyl]‐2H‐1‐benzopyran‐2‐one) derivatives 4 by a four‐component reaction of a salicylaldehyde 1 , 4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one, a benzylamine 2 , and a diaroylacetylene (=1,4‐diarylbut‐2‐yne‐1,4‐dione) 3 in EtOH is reported. This new protocol has the advantages of high yields (Table), and convenient operation. The structures of these coumarin (=2H‐1‐benzopyran‐2‐one) derivatives, which are important compounds in organic chemistry, were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).     

4‐(2‐Hydroxyphenyl)‐2‐phenyl‐2,3‐dihydro‐1H‐1,5‐benzodiazepine and the 2‐(2,3‐dimethoxyphenyl)‐, 2‐(3,4‐dimethoxyphenyl)‐ and 2‐(2,5‐dimethoxyphenyl)‐substituted derivatives

The 1,5‐benzodiazepine ring system exhibits a puckered boat‐like conformation for all four title compounds [4‐(2‐hydroxyphenyl)‐2‐phenyl‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₁H₁₈N₂O, (I), 2‐(2,3‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (II), 2‐(3,4‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (III), and 2‐(2,5‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (IV)]. The stereochemical correlation of the two C₆ aromatic groups with respect to the benzodiazepine ring system is pseudo‐equatorial–equatorial for compounds (I) (the phenyl group), (II) (the 2,3‐dimethoxyphenyl group) and (III) (the 3,4‐dimethoxyphenyl group), while for (IV) (the 2,5‐dimethoxyphenyl group) the system is pseudo‐axial–equatorial. An intramolecular hydrogen bond between the hydroxyl OH group and a benzodiazepine N atom is present for all four compounds and defines a six‐membered ring, whose geometry is constant across the series. Although the molecular structures are similar, the supramolecular packing is different; compounds (I) and (IV) form chains, while (II) forms dimeric units and (III) displays a layered structure. The packing seems to depend on at least two factors: (i) the nature of the atoms defining the hydrogen bond and (ii) the number of intermolecular interactions of the types O—H...O, N—H...O, N—H...π(arene) or C—H...π(arene).     

Reaction of 2,3‐Dichloro‐1,4‐Naphthoquinone with 1‐Phenylbiguanide and 2‐Guanidinebenzimidazole

When 2,3‐dichloro‐1,4‐naphthoquinone (DCHNQ) ( 1 ) is allowed to react with 1‐phenylbiguanide (PBG) ( 2 ), 4‐chloro‐2,5‐dihydro‐2,5‐dioxonaphtho[1,2‐d]imidazole‐3‐carboxylic acid phenyl amide ( 4 ), 6‐chloro‐8‐phenylamino‐9H‐7,9,11‐triaza‐cyclohepta[a]naphthalene‐5,10‐dione ( 5 ) and 4‐dimethyl‐amino‐5,10‐dioxo‐2‐phenylimino‐5,10‐dihydro‐2H‐benzo[g]quinazoline‐1‐carboxylic acid amide ( 6 ) were obtained. While on reacting 1 with 2‐guanidinebenzimidazole (GBI) ( 3 ) the products are 3‐(1H‐benzoimidazol‐2‐yl)‐4‐chloro‐3H‐naphtho[1,2‐d]imidazole‐2,5‐dione ( 7 ) and 3‐[3‐(1H‐benzoimidazol‐2‐yl)‐ureido]‐1,4‐dioxo‐1,4‐dihydronaphthalene‐2‐carboxylic acid dimethylamide ( 8 ).     

Heterocyclization reaction of 2‐(2‐methylaziridin‐1‐yl)‐3‐ureidopyridines under appel's conditions

The reaction of 2‐(2‐methylaziridin‐1‐yl)‐3‐ureidopyridines 12 with triphenylphosphine, carbon tetra‐chloride, and triethylamine (Appel's conditions) led to the corresponding carbodiimides 13 , which underwent intramolecular cycloaddition reaction with aziridine under the reaction conditions to give the pyridine‐fused heterocycles, 2,3‐dihydro‐1H‐imidazo[2′,3′:2,3]imidazo[4,5‐b]pyridines 16 and 12,13‐dihydro‐5H‐1,3 ‐benzodiazepino [2′,3′:2,3] imidazo[4,5‐b]pyridines 17 .     

Synthesis of 1,3,4‐oxa(or thia)diazaheterocycles starting from 2‐(pyrrol‐1'‐y1)phthalimide

1‐(1,3‐Dioxo‐1,3‐dihydro‐2H‐isoindol‐2‐yl)‐1H‐pyrrol‐2 carbaldehyde 4 was synthesized by Vilsmeier‐Haack reaction from 2‐(pyrrol‐1‐yl) phthalimide. Reduction of 4 by sodium borohydride, or action of Grignard reagents on 4 led to the corresponding alcohols 5 which were cyclized to pyrroloxadiazino isoin‐doles 1 by heating in the presence of silica gel. Transformation of the hydroxylactam 6 with acetic acid derivatives led to the esters 7 which gave, after saponification, pyrroloxa(or thia)diazepinoisoindolones 2 by intramolecular cyclization.     

Reduction of 3‐Aminoquinoline‐2,4(1H,3H)‐diones and Deamination of the Reaction Products

3‐Aminoquinoline‐2,4‐diones were stereoselectively reduced with NaBH₄ to give cis‐3‐amino‐3,4‐dihydro‐4‐hydroxyquinolin‐2(1H)‐ones. Using triphosgene (=bis(trichloromethyl) carbonate), these compounds were converted to 3,3a‐dihydrooxazolo[4,5‐c]quinoline‐2,4(5H,9bH)‐diones. The deamination of the reduction products using HNO₂ afforded mixtures of several compounds, from which 3‐alkyl/aryl‐2,3‐dihydro‐1H‐indol‐2‐ones and their 3‐hydroxy and 3‐nitro derivatives were isolated as the products of the molecular rearrangement.     

Reactions of 2‐Unsubstituted 1H‐Imidazole 3‐Oxides with 2,2‐Bis(trifluoromethyl)ethene‐1,1‐dicarbonitrile: A Stepwise 1,3‐Dipolar Cycloaddition

The reaction of 1,4,5‐trisubstituted 1H‐imidazole‐3‐oxides 1 with 2,2‐bis(trifluoromethyl)ethene‐1,1‐dicarbonitrile ( 7 , BTF) yielded the corresponding 1,3‐dihydro‐2H‐imidazol‐2‐ones 10 and 2‐(1,3‐dihydro‐2H‐imidazol‐2‐ylidene)malononitriles 11 , respectively, depending on the solvent used. In one example, a 1 : 1 complex, 12 , of the 1H‐imidazole 3‐oxide and hexafluoroacetone hydrate was isolated as a second product. The formation of the products is explained by a stepwise 1,3‐dipolar cycloaddition and subsequent fragmentation. The structures of 11d and 12 were established by X‐ray crystallography.     

Sequential Ugi Four‐Component Reaction (4‐CR)/CH Activation Using (Diacetoxyiodo)benzene for the Synthesis of 3‐(Diphenylmethylidene)‐2,3‐dihydro‐1H‐indol‐2‐ones

A sequential Ugi four‐component reaction (4‐CR)/C? H activation using (diacetoxyiodo)benzene is reported. This process is a five‐component reaction of aromatic aldehydes, aniline derivatives, isocyanides, phenylpropiolic acid (3‐phenylprop‐2‐ynoic acid), and (diacetoxyiodo)benzene for the synthesis of 3‐(diphenylmethylidene)‐2,3‐dihydro‐1H‐indol‐2‐ones. This procedure offers several advantages such as good yields, high bond‐forming efficiency, selectivity, and short reaction times.     

An Efficient Synthesis of 3‐(3‐benzyl‐2‐(phenylimino)‐2,3‐dihydrothiazol‐4‐yl)‐6‐methyl‐4‐(2‐oxo‐2‐phenylethoxy)‐3,4‐dihydro‐2H‐pyran‐2‐one Derivatives via Multi‐Component Approach

An easy, highly efficient and a new convenient one‐pot, two‐step approach to the synthesis of 3‐(3‐benzyl‐2‐(phenylimino)‐2,3‐dihydrothiazol‐4‐yl)‐6‐methyl‐4‐(2‐oxo‐2‐phenylethoxy)‐3,4‐dihydro‐2H‐pyran‐2‐one is described. These compounds were synthesized from 3‐(3‐benzyl‐2‐(phenylimino)‐2,3‐dihydrothiazol‐4‐yl)‐4‐hydroxy‐6‐methyl‐3,4‐dihydro‐2H‐pyran‐2‐one and α‐bromoketones in good yields. The compounds 4 were synthesized by a multi‐component reaction between 1 , 2 , and 3 and the prominent features of this protocol are mild reaction conditions, operation simplicity, and good to high yields of products.     

Two‐Step Synthesis of 1,3‐Disubstituted 3,4‐Dihydro‐4‐thioxoquinazolin‐2(1H)‐ones from 1‐Bromo‐2‐fluorobenzenes

An efficient synthesis of 3‐alkyl‐3,4‐dihydro‐4‐thioxobenzoquinazolin‐2(1H)‐ones 3 has been accomplished in two steps and in satisfactory yields from 1‐bromo‐2‐fluorobenzenes 1 . Thus, the reaction of 1‐fluoro‐2‐lithiobenzenes, generated by the Br/Li exchange between 1 and BuLi, with alkyl isothiocyanates, gives N‐alkyl‐2‐fluorobenzothioamides 2 , which, in turn, react with a series of isocyanates in the presence of NaH to give the desired products 3 .     

The Behavior of 2‐Substituted‐3‐hydroxyisoindolinones in the Reaction with sec‐Butyllithium

This paper presents a dualistic behavior of 2‐substituted‐3‐hydroxyisoindolones in reactions with sec‐butyllithium (sec‐BuLi). 2‐tert‐Butyl‐3‐hydroxy‐2,3‐dihydro‐1H‐isoindol‐1‐one ( 1a ) treated with sec‐BuLi undergoes metalation at position 7. On the other hand, the reaction between 3‐hydroxy‐2‐phenyl‐2,3‐dihydroxyisoindol‐1‐one ( 1j ) and sec‐BuLi results in 3‐sec‐butyl‐2‐phenyl‐2,3‐dihydroisiondol‐1‐one ( 3j ).     

Synthese und Reaktivität von 2‐Brom‐1,3‐diethyl‐2,3‐dihydro‐1 H‐1,3,2‐benzodiazaborol Molekülstruktur von Bis(1,3‐diethyl‐2,3‐dihydro‐1 H‐1,3,2‐benzodiazaborol‐2‐yl)

Synthesis and Reactivity of 2‐Bromo‐1,3‐diethyl‐2,3‐dihydro‐1 H ‐1,3,2‐benzodiazaborole Molecular Structure of Bis(1,3‐diethyl‐2,3‐dihydro‐1 H ‐1,3,2‐benzodiazaborol‐2‐yl The reaction of a slurry of calcium hydride in toluene with N,N′‐diethyl‐o‐phenylenediamine ( 1 ) and boron tribromide affords 2‐bromo‐1,3‐diethyl‐2,3‐dihydro‐1 H‐1,3,2‐benzodiazaborol ( 2 ) as a colorless oil. Compound 2 is converted into 2‐cyano‐1,3‐diethyl‐2,3‐dihydro‐1 H‐1,3,2‐benzodiazaborole ( 3 ) by treatment with silver cyanide in acetonitrile. Reaction of 2 with an equimolar amount of methyllithium affords 1,3‐diethyl‐2‐methyl‐2,3‐dihydro‐1 H‐1,3,2‐benzodiazaborole ( 4 ). 1,3,2‐Benzodiazaborole is smoothly reduced by a potassium‐sodium alloy to yield bis(1,3‐diethyl‐2,3‐dihydro‐1 H‐1,3,2‐benzodiazaborol‐2‐yl] ( 7 ), which crystallizes from n‐pentane as colorless needles. Compound 7 is also obtained from the reaction of 2 and LiSnMe₃ instead of the expected 2‐trimethylstannyl‐1,3,2‐benzodiazaborole. N,N′‐Bis(1,3‐diethyl‐2,3‐dihydro‐1 H‐1,3,2‐benzodiazaborol‐2‐ yl)‐1,2‐diamino‐ethane ( 6 ) results from the reaction of 2 with Li(en)C≡CH as the only boron containing product. Compounds 2 – 4 , 6 and 7 are characterized by means of elemental analyses and spectroscopy (IR, ¹H‐, ¹¹B{¹H}‐, ¹³C{¹H}‐NMR, MS). The molecular structure of 7 was elucidated by X‐ray diffraction analysis.